MSP430F2012IPW - 16MHz Ultra-Low-Power MCU | Texas Instruments
部品番号: MSP430F2012IPW ✓ 生産中MSP430F2012IPW 概要
A mixed-signal microcontroller is a semiconductor device that combines a programmable processor with analog measurement functions. Within the broader hierarchy of embedded processors, the MSP430F2012 belongs to the low-power MCU family and integrates CPU, memory, ADC, timers, and serial interfaces. This integration reduces board area and simplifies designs that require periodic sensing, control updates, and low standby consumption rather than continuous high-performance processing.
The MSP430F2012IPW operates at up to 16 MHz and provides 2 KB Flash plus 128 bytes of SRAM. Its 10-bit ADC supports embedded analog measurements, while the listed timer, I2C, and SPI resources support sensor acquisition, event timing, and external peripheral communication. The industrial ordering option supports a -40°C to 85°C temperature range, making the device appropriate for temperature-varying industrial equipment when the complete circuit also meets its environmental requirements.
The MSP430 architecture uses a 16-bit RISC processor with 16-bit registers and constant generators, supporting efficient code execution in a compact memory budget. A frequency-locked loop supports controlled clock operation, while the ability to wake from standby in less than 6 µs helps the MCU alternate between short active measurement periods and low-power intervals. These characteristics are particularly valuable when standby energy dominates the operating profile.
Typical uses include battery-powered sensor nodes, industrial process transmitters, compact energy meters, portable measurement instruments, and low-duty-cycle control boards. I2C and SPI permit connection with sensors and memory, while the ADC handles analog inputs from resistive dividers, thermistors, and external sensing circuits. Firmware should use timer-driven wake events rather than continuous polling to realize the intended low-power benefit.
Designers should budget the ADC reference, input impedance, acquisition time, and signal conditioning according to the datasheet. Decoupling capacitors should be placed close to the supply pins, and unused inputs should be connected according to the device recommendations. Software must also verify clock selection, wake conditions, and flash endurance before establishing a field update policy.
This page combines the manufacturer’s core MCU specifications, package and ordering information, pricing evidence, drop-in alternatives, comparison parameters, and practical design guidance. It also distinguishes confirmed functions from parameters that require an engineering review, helping engineers evaluate the MSP430F2012IPW for embedded control and low-power sensing designs.
ドロップイン代替品: MSP430F2012IPW — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MSP430F2012IPW (同一形状・フットプリント) — 相違点: ADC Resolution, Flash Memory, Package, Mounting Type, SRAM.
MSP430F2012TPW
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MSP430F2011IPW
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MSP430F2013IPW
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MSP430F2012IPW 最大定格&電気的特性
| CPU Architecture | 16-bit RISC |
| 最大クロック周波数 | 16 MHz |
| Instruction Cycle Time | 125 ns |
| Flash Memory | 2 KB |
| SRAM | 128 bytes |
| ADC Resolution | 10 bits |
| Digital Serial Interfaces | I2C and SPI |
| Timer Resources | Yes |
| Power-Saving Modes | 5 modes |
| Standby Wake-Up Time | Less than 6 µs |
| 電源電圧 | 2.5 V / 3.3 V |
| 動作温度範囲 | -40°C to 85°C |
| パッケージ | 14-pin TSSOP (PW) |
| 実装タイプ | Surface mount |
| Clocking | Frequency-locked loop (FLL+) |
MSP430F2012IPW 14-pin tssop (pw) ピン配置ガイド
MSP430F2012IPW (14-pin tssop (pw) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MSP430F2012IPW.
詳細は データシート をご参照ください。
主な用途
MSP430F2012IPW の用途: 6 件s: Battery-Powered Sensor Nodes, Industrial Process Transmitters, Portable Energy Measurement, Compact Data Acquisition Modules, Low-Duty-Cycle Control Boards, Portable Medical and Environmental Monitors.
Battery-Powered Sensor Nodes
The MSP430F2012IPW fits compact battery-powered sensor nodes that periodically acquire analog data and communicate through a serial interface. Its 16 MHz MSP430 core provides a 125 ns instruction cycle, while 2 KB Flash supports focused acquisition, filtering, and reporting firmware. The five power-saving modes and standby wake-up in less than 6 µs help the controller remain inactive between measurements. Use the 10-bit ADC for suitably conditioned sensor signals, configure I2C or SPI for external devices, and activate peripherals only around each acquisition event. Actual battery life depends on sensor load, wake interval, supply voltage, and firmware behavior.
おすすめ
Industrial Process Transmitters
The MSP430F2012IPW is suitable for industrial process transmitters that combine sensor excitation, signal measurement, and local control. Its 10-bit ADC can sample conditioned inputs from resistive bridges, thermistors, or other analog transducers, while I2C and SPI provide paths to calibration storage, display controllers, or external converters. The industrial -40°C to 85°C ordering range supports deployment across a broad range of ambient conditions. The 2 KB Flash footprint favors compact, event-driven firmware, and the low-power modes help manage the energy budget when the transmitter operates from a constrained supply.
おすすめ
Portable Energy Measurement
The MSP430F2012IPW can serve as the measurement controller in portable energy-monitoring equipment where periodic sampling is more important than continuous computation. The 16-bit RISC core handles fixed-point processing and data aggregation, while the ADC measures conditioned voltage, current, or temperature signals. Its 128 bytes of SRAM support short working buffers, and 2 KB Flash accommodates tightly scoped acquisition code. Timer resources can establish repeatable sampling intervals, while I2C or SPI can connect an external display or nonvolatile memory. Firmware should avoid continuous polling to preserve the benefit of the five low-power modes.
おすすめ
Compact Data Acquisition Modules
The MSP430F2012IPW is appropriate for compact data-acquisition modules that gather a limited number of analog channels and forward results over a serial link. Its integrated 10-bit ADC reduces the need for a separate converter in cost-sensitive designs, while the 16 MHz core provides enough timing control for scheduled sampling and basic filtering. I2C and SPI allow expansion with sensors, ADC stages, or memory. The 14-pin TSSOP package supports dense board layouts, although careful grounding and short analog routing remain essential. System designers should verify ADC input limits, acquisition behavior, and reference accuracy before finalizing the front end.
おすすめ
Low-Duty-Cycle Control Boards
The MSP430F2012IPW can implement low-duty-cycle control for appliances, instrumentation, and embedded products that wake to perform a short sequence of measurements and decisions. The 125 ns instruction cycle and 16 MHz operating capability support responsive control logic, while the 10-bit ADC provides direct access to analog control variables. Timers can trigger periodic wake events, and I2C or SPI can communicate with actuators and sensors. The 128 bytes of SRAM limit complex buffering, so the firmware should process measurements as they arrive. Keeping the CPU asleep between events is central to achieving a predictable low-power operating profile.
おすすめ
Portable Medical and Environmental Monitors
The MSP430F2012IPW can support portable environmental or medical monitoring modules that periodically sample sensors and transmit compact results. Its ultra-low-power architecture, 10-bit ADC, and standby wake-up in less than 6 µs are useful when the device spends most of its time between measurement events. I2C and SPI provide flexible connections to sensor and memory components, while the 16-bit CPU handles simple threshold logic and data formatting. For medical use, the MCU alone does not establish system compliance; developers must also evaluate electrical safety, calibration, firmware validation, and applicable regulatory requirements for the complete product.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MSP430F2012IPW — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MSP430F2012TPW | MSP430F2011IPW | MSP430F2013IPW |
|---|---|---|---|---|
| Package | 14-pin TSSOP (PW) | 14-pin TSSOP (PW) | 14-pin TSSOP (PW) | 14-pin TSSOP (PW) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
主な差別化要因
- Industrial-temperature ordering option (vs MSP430F2012TPW)
- Compact mixed-signal integration (vs MSP430F2011IPW)
- Low-power wake response (vs MSP430F2013IPW)
設計ノート
Build the firmware around periodic wake events, disable unused peripherals, and place unused GPIO inputs in defined states. The MSP430F2012 offers five power-saving modes and a standby wake-up time below 6 µs, but the total current also depends on clock configuration, analog circuitry, and the duration of active acquisition. Measure current across sleep, wake, conversion, and communication phases instead of relying only on a single operating-mode figure.
Place the required decoupling capacitors next to the supply and ground pins, and keep the analog input route short and away from switching nodes. Treat the ADC reference and signal ground as sensitive paths because the converter has 10-bit resolution. Follow the manufacturer’s PW-package land pattern and verify it against the mechanical drawing before fabrication; a generic 14-pin TSSOP footprint should not be accepted without dimensional review.
Do not assume that matching the 14-pin package proves drop-in compatibility. Compare pin multiplexing, reset behavior, clock requirements, programming interface, ADC channels, serial-interface assignments, and operating-temperature limits. The 2 KB Flash limit also requires firmware-space budgeting, especially when a bootloader, calibration data, or communication protocols are included. Validate the complete build and timing budget on the selected replacement before production release.
Use the ADC’s documented sampling and acquisition behavior when designing multiplexed sensor inputs. Allow sufficient settling time for high-impedance sources, use conditioning networks that limit source impedance, and validate the analog front end with the intended sensor rather than evaluating only a low-impedance signal generator. I2C and SPI traces should be kept short, with pull-up or termination values selected from the actual bus speed and capacitance.
コンプライアンス情報
The device is identified as an industrial-temperature ordering option, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was present in the cited product information. Confirm compliance documentation for the complete ordering configuration before regulated production use.