MSP430F2121TPW - 16MHz 4KB Flash MCU | Texas Instruments
部品番号: MSP430F2121TPW ✓ 生産中MSP430F2121TPW 概要
A mixed-signal microcontroller is a semiconductor that integrates digital processing and analog signal-handling functions onto one device. Within the broader hierarchy, an MCU is a programmable integrated circuit containing a CPU, memory, and peripherals. The MSP430 family is positioned as an ultra-low-power platform for portable measurement applications. Its architecture and low-power operating modes are intended to reduce energy consumption when a system spends much of its time acquiring or monitoring data rather than processing continuously.
The MSP430F2121TPW combines a 16 MHz maximum clock with 4 KB of flash for firmware and 256 bytes of SRAM for working data. Its timer and comparator resources support timing, threshold, and basic signal-conditioning tasks without requiring a separate timer or comparator IC in suitable designs. The 1.8 V to 3.6 V operating range supports low-voltage embedded systems, while the -40°C to +105°C temperature rating covers industrial-temperature requirements.
Texas Instruments describes the MSP430F21x2 family as using a 16-bit RISC core with 16-bit registers and five low-power modes. This architecture favors compact instruction handling and efficient embedded operation. The 4 KB flash capacity is suitable for focused control, sensing, or data-logging firmware, although application code should be assessed against the available memory before feature expansion.
Typical uses include portable environmental sensors, industrial condition-monitoring nodes, battery-powered meter interfaces, compact instrumentation, low-power control panels, and connected sensor modules. In these applications, the device can coordinate sensor acquisition, perform threshold comparisons, manage timers, and place unused peripherals or the CPU into low-power states to improve battery life.
Design should begin with the manufacturer's pin description and application guidance. Keep decoupling close to the supply pins, confirm the device's I/O voltage limits against the board architecture, and review the clock and reset configuration before programming. Firmware changes between MSP430 family members should be checked carefully because memory capacity, peripheral options, and device-specific behavior may differ even when the package is shared.
This page combines the manufacturer specifications, packaging details, lifecycle information, practical design guidance, and same-package family alternatives to support PCB reuse, firmware assessment, and component-selection decisions for MSP430F2121TPW designs.
ドロップイン代替品: MSP430F2121TPW — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MSP430F2121TPW (同一形状・フットプリント) — 相違点: Flash Memory, Package, SRAM, Mounting Type, Low-Power Modes.
MSP430F2112IPW
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MSP430F2122IPW
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MSP430F2131IPW
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MSP430F2132IPW
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MSP430F2101IPW
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MSP430F2121TPW 最大定格&電気的特性
| Product Type | 16-bit mixed-signal microcontroller (MCU) |
| 最大クロック周波数 | 16 MHz |
| CPU Architecture | 16-bit RISC |
| Register Width | 16-bit |
| Flash Memory | 4 KB |
| SRAM | 256 bytes |
| Supply Voltage Range | 1.8 V to 3.6 V |
| 動作温度範囲 | -40°C to +105°C |
| Comparator | Yes |
| Timer | Yes |
| Low-Power Modes | 5 modes |
| パッケージ | TSSOP-20 (PW) |
| ピン数 | 20 pins |
| 実装タイプ | Surface mount |
| RoHS ステータス | Compliant |
MSP430F2121TPW tssop-20 (pw) ピン配置ガイド
MSP430F2121TPW (tssop-20 (pw) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MSP430F2121TPW.
詳細は データシート をご参照ください。
主な用途
MSP430F2121TPW の用途: 6 件s: Portable Environmental Sensors, Battery-Powered Meter Interfaces, Industrial Condition Monitoring, Compact Instrumentation, Low-Power Control Panels, Connected Sensor Modules.
Portable Environmental Sensors
The MSP430F2121TPW fits portable environmental sensing because its 16 MHz RISC CPU can perform acquisition and control functions while its five low-power modes reduce activity between measurements. The 4 KB flash supports a focused sensor firmware, and the 256-byte SRAM is adequate for short-lived samples and working variables. Its 1.8 V to 3.6 V supply range also aligns with compact battery-powered designs. Use the comparator for threshold decisions and timers for periodic sampling. Because SRAM is limited to 256 bytes, avoid buffering large histories locally and transmit or store aggregated measurements instead.
おすすめ
Battery-Powered Meter Interfaces
The MSP430F2121TPW is suitable for compact meter interfaces that must combine measurement, timing, and low-power behavior in one package. Its 16-bit RISC CPU and 16-bit registers support efficient handling of sensor values, while the integrated comparator can support threshold-based events and the timer resources can organize measurement intervals. Operating from 1.8 V to 3.6 V supports low-energy systems. For best results, keep the device between measurement events and choose firmware that avoids unnecessary active peripherals. The 256-byte SRAM demands a disciplined buffer and stack budget.
おすすめ
Industrial Condition Monitoring
The MSP430F2121TPW can support industrial condition-monitoring modules that monitor a sensor, evaluate a threshold, and report an event. Its specified -40°C to +105°C operating range covers extended industrial environments, while the timer and comparator reduce the need for separate discrete functions. The 20-pin TSSOP package supports compact, surface-mounted assemblies. Design the firmware around the 4 KB flash and 256-byte SRAM limits, and use qualified external components for the power and signal-conditioning paths. A low-duty-cycle acquisition strategy helps preserve the energy efficiency expected from an MSP430-based portable node.
おすすめ
Compact Instrumentation
The MSP430F2121TPW is appropriate for compact instrumentation that requires local control, threshold comparison, and periodic measurement. Its 16 MHz CPU provides useful processing headroom for menu logic, calibration tables, and communication routines when firmware remains within the 4 KB flash allocation. The comparator can perform fast limit checks, while timers can establish acquisition or service intervals. The 1.8 V to 3.6 V operating range simplifies integration with low-voltage signal chains. For data logging, minimize simultaneous RAM residency and choose a serial interface or external storage strategy that does not exceed the device's 256-byte SRAM.
おすすめ
Low-Power Control Panels
The MSP430F2121TPW can serve as the local controller in a low-power control panel containing inputs, status indicators, and a small user interface. Its timer resources support debouncing, periodic updates, and timed output control, while the comparator can provide simple analog threshold decisions. The microcontroller's five low-power modes are particularly useful when the panel must remain responsive without continuously running the processor. Use the 20-pin TSSOP footprint to conserve board area and operate the system within 1.8 V to 3.6 V. Firmware should avoid relying on excessive SRAM buffering because only 256 bytes are available.
おすすめ
Connected Sensor Modules
The MSP430F2121TPW fits connected sensor modules where a local MCU must acquire a signal, make a decision, and communicate a result under a strict energy budget. Its 16-bit RISC CPU, comparator, and timers provide the core functions needed for sensor conditioning and event handling, while five low-power modes support duty-cycled operation. The compact 20-pin TSSOP package leaves room for a radio, sensor, and local passives on a small module. Firmware and hardware must be jointly budgeted around 4 KB of flash and 256 bytes of SRAM. Keep radio wake cycles separate from precise timing paths to avoid missed acquisition events.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MSP430F2121TPW — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MSP430F2112IPW | MSP430F2122IPW | MSP430F2131IPW | MSP430F2132IPW | MSP430F2101IPW |
|---|---|---|---|---|---|---|
| Package | TSSOP-20 (PW) | TSSOP-20 (PW) | TSSOP-20 (PW) | TSSOP-20 (PW) | TSSOP-20 (PW) | TSSOP-20 (PW) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| CPU Architecture | 16-bit RISC | 16-bit RISC | 16-bit RISC | 16-bit RISC | 16-bit RISC | 16-bit RISC |
| Maximum Clock Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
主な差別化要因
- Combines a 16 MHz CPU, timer, and comparator in a 20-pin TSSOP (vs MSP430F2112IPW)
- Defined 4 KB flash and 256-byte SRAM resource target (vs MSP430F2122IPW)
- Industrial temperature option in the 20-pin PW configuration (vs MSP430F2101IPW)
設計ノート
Operate the MSP430F2121TPW within its 1.8 V to 3.6 V supply range and place the required bypass capacitors close to the device supply pins. For low-power sensor nodes, use the five available low-power modes deliberately rather than leaving unused peripherals active. Measure the current in each operating state, because the sleep-state contribution can materially affect battery life even when the 16 MHz processing capability is used only briefly.
Assign PCB tracks from the manufacturer pin-description table because the 20-pin TSSOP contains multiplexed functions and a complete pin-name list is not reproduced on this page. Confirm every peripheral function against the selected device variant before final routing. Keep high-impedance analog inputs short, isolate clock and sensitive measurement routes, and provide a stable ground-return path for comparator and timer functions.
Do not treat a shared TSSOP footprint as proof of complete software compatibility. The alternative family members retain the 16 MHz RISC architecture but differ in memory and peripheral tiers. Review interrupt-vector placement, linker memory assumptions, timer behavior, comparator channels, and device-specific registers in the exact replacement datasheet. Rebuild and test the firmware rather than relying only on successful code compilation.
The 1.8 V to 3.6 V operating range generally keeps dissipation modest, but the exact result depends on clock activity, I/O loading, supply voltage, and the number of active peripherals. Use the manufacturer's operating-frequency and current guidance to estimate activity-dependent heating. Provide normal copper connectivity around the TSSOP and avoid enclosing the device in a thermally insulating area when it operates continuously near the upper ambient-temperature limit.
コンプライアンス情報
The product listing identifies the MSP430F2121TPW as RoHS compliant. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer documentation.