OPA202ID - 36V Low-Noise Precision Op Amp | Texas Instruments
部品番号: OPA202ID ✓ 生産中OPA202ID 概要
A precision operational amplifier is a voltage-feedback amplifier designed to amplify the voltage difference between its inverting and non-inverting inputs while minimizing offset, noise, bias-current, and distortion effects. The OPA202ID uses a super-beta BJT input architecture to balance low input noise with low bias current. Its low output impedance and capacitive-load drive capability make it useful when the amplifier must directly interface with cables, sensors, converters, and other real-world analog nodes.
The primary distinguishing specifications are 0.2 uVPP input noise, 9 nV/sqrt(Hz) noise density, 25 nF capacitive-load drive, and a 36 V operating supply. The OPA202ID is supplied in an 8-SOIC package with a push-pull output stage. Its single-circuit configuration allows it to perform precision current-voltage conversion, differential sensing, gain amplification, active filtering, and signal buffering without requiring a dual or quad device.
The super-beta input stage is the key architectural feature. Compared with a conventional bipolar precision amplifier, it is designed to reduce input bias current while retaining low voltage noise. Low bias current is especially valuable when the source impedance is high, because current through the source can create input-referred offset and gain errors. The combination of low bias current, low output impedance, and 25 nF capacitive-drive capability also helps preserve signal integrity when driving acquisition-system inputs rather than operating only with low-impedance laboratory loads.
Typical uses include precision current sensing, low-level sensor amplification, analog-to-digital converter input conditioning, active transducers, and instrumentation buffers. The part can also serve in audio and communication interfaces where low noise matters and the connected load includes significant cable or probe capacitance. Industrial measurement systems benefit from its low bias current, while higher-voltage signal chains can operate from a ±18 V split supply or another compatible arrangement within the 36 V total rating.
When designing around the OPA202ID, check the exact pin assignment in the manufacturer pin-description table before routing the PCB. Place input and feedback components close to the amplifier, keep sensitive input traces away from switching nodes, and treat the specified 25 nF drive capability as a design boundary rather than an unlimited load rating. Confirm output-current limits, common-mode range, supply current, and stability requirements for the selected operating point.
This product record combines the manufacturer product-page description, exact ordering information, package details, operating characteristics, and application-oriented engineering guidance. It also distinguishes the OPA202ID from other OPA202-family orderable variants, clarifies where drop-in alternatives are limited, and identifies engineering checks for noise, bias current, capacitive loading, and PCB implementation.
ドロップイン代替品: OPA202ID — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
OPA202UID
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
OPA202ID 最大定格&電気的特性
| Product Type | Single-circuit precision operational amplifier |
| Manufacturer | Texas Instruments |
| Maximum Supply Voltage | 36 V |
| Input Noise Peak-to-Peak | 0.2 uVPP |
| Input Noise Density | 9 nV/sqrt(Hz) |
| Heavy Capacitive Drive | 25 nF |
| Input Stage Architecture | Super-beta bipolar-junction-transistor input stage |
| Power Class | Low-power operational amplifier |
| 出力タイプ | Push-pull output |
| Number of Circuits | 1 circuit |
| Number of Terminals | 8 terminals |
| パッケージ | 8-SOIC, 0.154 inch width, 3.90 mm width |
| Package Code | D |
| Package Shape | Rectangular |
| Terminal Form | Gull wing |
| 実装タイプ | Surface mount |
| Temperature Grade | Industrial |
OPA202ID rectangular ピン配置ガイド
OPA202ID (rectangular パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: OPA202ID.
詳細は データシート をご参照ください。
主な用途
OPA202ID の用途: 6 件s: Precision Current-Sensing Signal Chains, High-Impedance Sensor Interfacing, Fast-Conversion ADC Input Conditioning, Industrial Instrumentation and Buffering, Low-Noise Audio and Communication Interfaces, Active Filters and Precision Signal Conditioning.
Precision Current-Sensing Signal Chains
The OPA202ID fits precision current-sense amplifiers because its super-beta BJT input stage combines low input noise with low bias current, while the push-pull output supports accurate signal amplification. A shunt sensor produces a small differential voltage that the amplifier can convert into a voltage proportional to current. Low bias current limits error when the shunt and input network have appreciable source resistance, and the specified 0.2 uVPP input noise helps preserve small full-scale signals. The 36 V maximum supply rating also provides flexibility in industrial measurement systems. Before finalizing the circuit, confirm the common-mode input range, output swing, gain error, and operating current for the selected shunt and supply configuration.
おすすめ
High-Impedance Sensor Interfacing
OPA202ID is appropriate for high-impedance sensor interfaces because its super-beta bipolar input architecture is designed to combine low input bias current with low voltage noise. These characteristics reduce errors when a sensor has a high source impedance or when the input network must not disturb a small sensing current. The device can be configured as a non-inverting or inverting amplifier around the precision signal while its 0.2 uVPP input noise limits added signal uncertainty. The 25 nF capacitive-drive specification also helps when the sensor is connected through a cable or probe. Check the exact input bias current, offset behavior, common-mode limits, and noise spectrum against the sensor impedance before setting the closed-loop gain.
おすすめ
Fast-Conversion ADC Input Conditioning
The OPA202ID can condition inputs for precision, fast-acquisition analog-to-digital converters where low noise and stable drive into sampling capacitance matter. Its 0.2 uVPP input noise and 9 nV/sqrt(Hz) noise density reduce amplifier-added uncertainty, while the specified 25 nF capacitive-load drive capability supports interfaces that include converter input capacitance, protection devices, or routing capacitance. Low output impedance is particularly useful when the converter performs periodic charge sampling during conversion. The amplifier should be placed close to the converter, with feedback components positioned to minimize parasitic capacitance. Verify the selected ADC's input range, kickback behavior, acquisition time, and settling requirements rather than relying only on nominal bandwidth figures.
おすすめ
Industrial Instrumentation and Buffering
OPA202ID suits industrial instrumentation that buffers weak sensor signals before digitization or control. The super-beta BJT input stage provides low bias current, which helps preserve the integrity of high-resistance transducers and long analog connections. Its 0.2 uVPP input noise and 9 nV/sqrt(Hz) noise density are valuable when the process variable is represented by a small voltage. The single push-pull output in an 8-SOIC package provides a practical implementation for non-inverting, inverting, differential, or active-filter stages. For field-based equipment, keep sensitive traces away from power converters and relay nodes, use stable reference components around the amplifier, and confirm industrial temperature and transient requirements against the exact orderable device.
おすすめ
Low-Noise Audio and Communication Interfaces
OPA202ID can be used in low-level audio and communication interfaces where signal amplitude is small and added noise is directly audible or measurable. Its specified 0.2 uVPP input noise and 9 nV/sqrt(Hz) noise density provide a low-noise starting point for microphone preamplifiers, line-level buffers, and communication-signal conditioning stages. The heavy-capacitive-drive capability up to 25 nF is useful when the amplifier precedes a connector, cable, or codec input that presents appreciable capacitance. In a practical design, use short low-noise input paths, maintain clean return connections, and ensure that the output can remain linear over the required signal swing and bandwidth. Confirm distortion, slew-rate, output-current, and common-mode requirements for the actual channel.
おすすめ
Active Filters and Precision Signal Conditioning
OPA202ID is suitable for active filters and precision conditioning networks that require low input bias current, low noise, and predictable behavior around the signal source. The super-beta BJT input architecture reduces bias-current error in equal-input-resistance topologies, while the 0.2 uVPP noise specification helps maintain a clean measurement floor. Its push-pull output provides bidirectional drive for filter networks and downstream instrumentation. Component tolerances and temperature drift should be reviewed alongside the amplifier because passive-network error can dominate the final filter accuracy. Keep resistor networks compact and symmetric where applicable, place feedback components close to the device, and validate phase margin and gain against the intended frequency range. The exact gain-bandwidth and unity-gain stability values should be confirmed in the manufacturer datasheet.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: OPA202ID — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | OPA202UID |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 8-SOIC (D package) | 8-SOIC (D package) |
| Circuit Count | 1 circuit | 1 circuit |
| Maximum Supply Voltage | 36 V | 36 V |
| Input Noise Peak-to-Peak | 0.2 uVPP | 0.2 uVPP |
| Input Noise Density | 9 nV/sqrt(Hz) | 9 nV/sqrt(Hz) |
| Capacitive-Load Drive | 25 nF | 25 nF |
| Input Stage | Super-beta BJT | Super-beta BJT |
| Output Type | Push-pull | Push-pull |
| Power Class | Low power | Low power |
主な差別化要因
- Lower-noise input stage for precision acquisition (vs OPA202UID)
- High capacitive-load drive for real-world analog interfaces (vs OPA202UID)
- Wide supply capability for precision signal chains (vs OPA202UID)
設計ノート
Place input, feedback, and compensation components directly beside OPA202ID pins, and keep the sensitive input path short. High-impedance nodes are susceptible to leakage, surface contamination, and stray capacitance, so avoid routing them beside switching-power nodes, relay contacts, or long ground-return paths. For a capacitive load, use the shortest practical output trace and confirm that the selected feedback network remains stable at the maximum connected capacitance.
The specified 25 nF capacitive-drive capability is useful for probe, cable, and converter-input loading, but the amplifier still requires adequate loop stability and output-current margin. Establish the intended load, output voltage, frequency, and supply configuration, then compare them with the manufacturer characteristics. Add an isolation resistor only after checking that the resulting load and feedback network preserve the required settling behavior and do not create unacceptable gain error.
Do not treat the 36 V maximum supply rating as the recommended operating point, and do not assume that the 25 nF capacitive-load figure applies at every frequency or output amplitude. Use the pin-description table in the manufacturer datasheet to confirm the D-package pinout. Also account for input offset, bias-current error, noise gain, common-mode range, output swing, and supply-current limits when defining the usable precision of the circuit.
Separate the sensitive analog path from digital and switching signals, and provide a low-impedance return beneath or adjacent to the circuit where the board stackup permits it. For gain stages with high closed-loop gain, use closely placed feedback resistors to minimize parasitic feedback. Place bypass capacitors close to the supply pins and follow the exact compensation and decoupling arrangement shown for the chosen OPA202 configuration in the manufacturer documentation.
コンプライアンス情報
The OPA202 family is an industrial precision operational amplifier and is not an automotive-qualified product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer product documentation for the exact orderable device.