Texas Instruments

OPA244PA - 430kHz Low-Power Op Amp | Texas Instruments

部品番号: OPA244PA ✓ 生産中
Up to 36 V Vdss 50 uA per channel Id 8-pin PDIP Package
MOQ: 1 |

OPA244PA 概要

Texas Instruments OPA244PA is a single, micropower operational amplifier designed for battery-powered and portable equipment. It provides 430 kHz gain-bandwidth product, 50 uA typical quiescent current per channel, and single-supply operation up to 36 V in an 8-pin PDIP package. These characteristics make it suitable for portable instrumentation, sensor interfaces, battery monitoring, and low-power signal-conditioning circuits.

An operational amplifier is an analog semiconductor that amplifies the voltage difference between its two inputs. In the broader component hierarchy, the OPA244PA is a low-power voltage-feedback operational amplifier within the amplifier IC and signal-conditioning IC families. Its internal feedback arrangement allows engineers to configure stable gain with external resistors when the required noise, bandwidth, and bias-current characteristics suit the application.

The OPA244PA's 430 kHz bandwidth supports moderate-frequency signal processing without requiring the power consumption of a high-speed amplifier. Its 50 uA per-channel quiescent current is particularly useful in portable systems where battery capacity and standby energy are important. Single-supply operation from the factory through 36 V simplifies designs that derive operating power from batteries, industrial rails, or automotive-style supply ranges. The listed output current per channel is 12 mA.

OPA244PA is a single-amplifier version of the OPA244 family. Other family members use different package formats and channel counts, so their mechanical mounting and pin arrangements must be checked before substituting them into an existing board. The OPA244PA is identified as a standard general-purpose amplifier in an 8-pin PDIP package, making it useful when a through-hole footprint and single op amp are required. Electrical performance still depends on the selected operating voltage, feedback network, load, and source impedance.

Typical uses include low-frequency sensor amplification, portable measurement systems, battery threshold detection, current sensing, and general-purpose analog buffering. The 430 kHz bandwidth is suitable for many audio-band and instrumentation signals, although applications requiring substantially more bandwidth, lower offset voltage, or rail-to-rail input and output operation should compare the OPA244PA with specialized amplifier families before finalizing the design.

A key design consideration is the power-supply range: the confirmed single-supply limit reaches 36 V. Input common-mode range, output swing, input bias current, offset voltage, and slew rate still need to be checked against the manufacturer datasheet for the actual circuit. Decoupling capacitors should be placed close to the power pins, and the feedback components should be selected with the amplifier's input and output characteristics in mind.

This product page combines the confirmed OPA244PA characteristics with package guidance, application analysis, practical design notes, and a qualified replacement assessment. It also distinguishes the 8-pin PDIP OPA244PA from SOT-23-5 versions whose smaller footprint requires a different PCB land pattern.

ドロップイン代替品: OPA244PA — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

OP07DNZ

✅ ドロップイン
📦 8-pin PDIP
Input offset voltage is approximately 75 uV versus 700 uV for OPA244PA, a 629 uV or 89.6% lower value; suitability depends on the remaining pin and electrical characteristics.

📋 参考代替品(カタログ未掲載)

OPA244PA 最大定格&電気的特性

Product Type Single operational amplifier
Amplifier Type General-purpose micropower operational amplifier
Number of Channels 1 channel
Gain-Bandwidth Product 430 kHz
静止電流 50 uA per channel
Single-Supply Operating Voltage Up to 36 V
Output Current per Channel 12 mA
パッケージ 8-pin PDIP
実装スタイル Through-hole
RoHS ステータス RoHS details listed

OPA244PA 8-pin pdip ピン配置ガイド

OPA244PA (8-pin pdip パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

OPA244PA の 8-pin pdip パッケージピン配置図

詳細なピン配置データはありません: OPA244PA.

詳細は データシート をご参照ください。

主な用途

OPA244PA の用途: 6 件s: Battery-Powered Sensor Interfaces, Portable Measurement Instruments, Battery Voltage Threshold Detection, Current-Sensing Signal Conditioning, Low-Power Audio-Band Buffering, Industrial Low-Level Signal Conditioning.

🧩

Battery-Powered Sensor Interfaces

OPA244PA fits low-power sensor interfaces because its 50 uA typical quiescent current reduces standing demand while its 430 kHz gain-bandwidth product handles many slowly changing or low-bandwidth signals. The amplifier can condition a sensor output before conversion or transmission without introducing the higher power requirement of a general-purpose high-speed op amp. Place the amplifier close to the sensor and bypass the supply pins to minimize noise pickup. Confirm that the sensor signal remains within the input common-mode range, and select external feedback resistors to establish the required gain. Because OPA244PA is a single amplifier, dual-rail or dual-channel signal paths may require another device unless the signal path is multiplexed.

📱

Portable Measurement Instruments

OPA244PA is appropriate for compact handheld instruments that amplify low-level sensor signals while operating from a single battery or low-voltage rail. Its 430 kHz bandwidth covers many measurement signals requiring amplification and buffering, while 50 uA typical quiescent current per channel helps limit battery drain. The 8-pin PDIP format also supports through-hole construction and hand-wired prototypes. Verify input offset voltage and bias current against the required measurement accuracy, then evaluate OP07DNZ when substantially lower offset voltage is more important than operating current.

⚡

Battery Voltage Threshold Detection

OPA244PA can amplify the difference between a battery-derived voltage and a reference for threshold or state-of-charge detection. Its single-supply operation up to 36 V permits use across multiple battery chemistries, and the 430 kHz bandwidth is more than sufficient for slow battery-voltage changes. The amplifier should be evaluated against the minimum input common-mode voltage, because the input and output must remain inside their usable ranges near the end of discharge. A low-current design also benefits from the 50 uA typical quiescent current, although leakage through high-impedance divider nodes should be controlled separately.

⚡

Current-Sensing Signal Conditioning

OPA244PA can condition the voltage produced by a current-sense element when the signal bandwidth and common-mode limits are compatible. Its 430 kHz gain-bandwidth product supports many low- to moderate-bandwidth current measurements, and its 12 mA listed output current per channel is suitable for many low-load analog stages. Keep the sense-path traces short and use Kelvin-style routing where the shunt and amplifier are separated. Check the datasheet for input bias current and common-mode behavior because these characteristics determine the error introduced by high source impedance. OP07DNZ may offer lower input offset voltage for precise DC measurements.

🎧

Low-Power Audio-Band Buffering

OPA244PA can buffer and gain-control signals within the audio band because its 430 kHz gain-bandwidth product is substantially higher than typical 20 Hz to 20 kHz signal frequencies. The 50 uA typical quiescent current is useful in portable audio accessories, and single-supply operation simplifies common 3.3 V or 5 V architectures. The design must account for the amplifier's output swing and load capability at the selected supply. High-gain layouts should include the compensation network recommended by the manufacturer for the selected noise gain, and the PCB should minimize feedback-loop area.

🏭

Industrial Low-Level Signal Conditioning

OPA244PA can serve as a general-purpose signal-conditioning amplifier in industrial equipment when its supply, input range, and precision meet the circuit requirements. Single-supply operation up to 36 V supports higher-voltage systems, and the 430 kHz bandwidth accommodates many control and monitoring signals. The 8-pin PDIP package is useful for through-hole prototypes and serviceable industrial assemblies. Use local supply bypassing, route the high-impedance input away from switching nodes, and calculate the closed-loop bandwidth from the intended noise gain. If the application requires closer DC precision, compare the 700 uV OPA244PA offset with the approximately 75 uV offset of OP07DNZ.

おすすめ製品の概要

OP07DNZ 8-DIP precision amplifier considered for selected DC-sensitive interfaces 使用用途: Battery-Powered Sensor Interfaces, Portable Measurement Instruments, Current-Sensing Signal Conditioning, Industrial Low-Level Signal Conditioning OPA244UA Texas Instruments 使用用途: Battery Voltage Threshold Detection OPA244NA/3K Compact SOT-23-5 family option for space-constrained audio designs 使用用途: Low-Power Audio-Band Buffering
What is the OPA244PA?
The OPA244PA is a Texas Instruments single-channel, micropower operational amplifier with a 430 kHz gain-bandwidth product and 50 uA typical quiescent current per channel. It is offered in an 8-pin PDIP package for through-hole PCB layouts. According to the Texas Instruments OPA244 datasheet, the device is intended for low-power, portable, and general-purpose analog-signal applications.
What is the operating voltage range of OPA244PA?
OPA244PA supports single-supply operation up to 36 V. The confirmed device family is designed for battery-powered and portable equipment, allowing operation from low-voltage sources through higher-voltage industrial rails. Before finalizing a design, use the manufacturer's pin-description and electrical-characteristics tables to confirm the input common-mode range and output swing at the selected supply voltage.
What is the bandwidth of OPA244PA?
OPA244PA has a gain-bandwidth product of 430 kHz. This bandwidth supports moderate-frequency amplification and general signal conditioning without moving into the power and noise profile of a high-speed operational amplifier. According to the Texas Instruments OPA244 datasheet, usable closed-loop bandwidth also depends on the selected noise gain and feedback resistor arrangement.
Why is OPA244PA suitable for battery-powered devices?
OPA244PA is suitable for portable equipment because it consumes 50 uA of typical quiescent current per channel and operates from a single supply up to 36 V. Its low quiescent demand reduces standing current when the device is active, while the single-supply architecture simplifies power routing. The Texas Instruments OPA244 datasheet identifies micropower operation as a core feature of the family.
What package does OPA244PA use?
OPA244PA uses an 8-pin PDIP package and is mounted through-hole. The 8-PDIP footprint differs from the SOT-23-5 OPA244UA and OPA244NA/3K versions, so those surface-mount parts cannot be installed directly on an OPA244PA board. Confirm the package drawing and pin numbering in the Texas Instruments datasheet before ordering or substituting the device.
Where can I download the OPA244PA datasheet PDF?
The official Texas Instruments OPA244 product page provides access to the family documentation, including the OPA244PA datasheet and package information. Use that page to select the current manufacturer PDF rather than an archived copy. The datasheet contains the authoritative electrical characteristics, pin descriptions, typical application circuits, and ordering information for the 8-pin PDIP configuration.
Where can I find the OPA244PA pinout?
The OPA244PA pinout is documented in the pin-configuration section of the Texas Instruments OPA244 datasheet. The device has eight pins in a PDIP package, and the package drawing should be matched to the exact OPA244PA ordering configuration. The SOT-23-5 pin assignments used by OPA244UA and OPA244NA/3K do not apply to the PDIP device.
What is the difference between OPA244PA and OPA244UA?
OPA244PA and OPA244UA use the same OPA244 family designation, but their packages are different. OPA244PA is an 8-pin PDIP through-hole device, while OPA244UA is listed as a SOT-23-5 surface-mount device. Because the mechanical footprints and pin counts differ, OPA244UA is not a drop-in replacement for an existing OPA244PA board.
Is OPA244PA suitable for sensor signal conditioning?
OPA244PA is suitable for many low-frequency sensor signal-conditioning circuits because it combines 430 kHz bandwidth with 50 uA typical quiescent current. It can amplify, buffer, or filter signals from resistive sensors when the sensor output lies within the amplifier's input common-mode range. Verify offset voltage, bias current, and common-mode limits against the specific sensor source impedance and supply condition.
Can OP07DNZ replace OPA244PA?
OP07DNZ can be considered in certain OPA244PA applications because both are offered in 8-DIP-style packages, but it is not a universally equivalent substitution. The replacement comparison identifies approximately 700 uV input offset voltage for OPA244PA versus 75 uV for OP07DNZ, making OP07DNZ advantageous for higher-precision DC amplification. Verify pin functions, supply requirements, bandwidth, bias current, and stability before redesigning a board.
What is the best drop-in replacement for OPA244PA?
No confirmed drop-in replacement for OPA244PA is established because the available cross-reference information does not document five or more pin-compatible 8-PDIP alternatives with equivalent electrical ratings. OP07DNZ may fit certain 8-DIP applications, but its lower offset voltage changes the performance envelope. Do not treat a family label or package count alone as proof of pin-to-pin compatibility.
When should I choose OPA244PA instead of a conventional op amp?
Choose OPA244PA when the circuit needs single-supply operation, low quiescent current, and moderate bandwidth rather than very low offset voltage or rail-to-rail swing. Its 50 uA per-channel quiescent current and 430 kHz bandwidth are useful for portable sensing and signal conditioning. Select a higher-precision amplifier for demanding DC measurements or a low-voltage amplifier for rail-to-rail portable designs.
How much output current can OPA244PA provide?
OPA244PA is listed with an output current per channel of 12 mA. That figure should be treated as a device rating rather than a recommended continuous-load target. Texas Instruments lists the OPA244PA as a general-purpose amplifier in an 8-PDIP package; consult the manufacturer electrical characteristics for output-voltage conditions, load type, and thermal limits before driving a load.
How should OPA244PA be decoupled on a PCB?
Place a suitable bypass capacitor directly between each supply pin and ground, with the shortest possible traces, following the Texas Instruments datasheet layout recommendation. Keep the feedback resistors and signal paths away from the supply-capacitor return path where practical. This arrangement reduces supply-impedance-induced noise and helps the amplifier maintain its intended 430 kHz bandwidth.
Where can I buy OPA244PA and check its current price and lead time?
Use the Request a Quote form on this page to request the current OPA244PA price, stock position, minimum order quantity, and lead time. Quote requests are appropriate because pricing and availability can change independently of the device's electrical characteristics. Confirm that the returned manufacturer part number is OPA244PA, including its 8-pin PDIP package suffix.
Is OPA244PA currently in stock?
Current OPA244PA inventory is confirmed through the Request a Quote form on this page rather than through a static stock claim. Provide the required quantity, target date, and acceptable shipment destination when requesting a quote. The manufacturer part number should be written as OPA244PA so the inquiry is matched to the 8-pin PDIP configuration.
What are the key specifications of OPA244PA that engineers should know?
The key OPA244PA specifications are a 430 kHz gain-bandwidth product, 50 uA typical quiescent current per channel, single-supply operation up to 36 V, 12 mA listed output current per channel, and an 8-pin PDIP package. Texas Instruments positions the OPA244 family for low-power portable equipment. These figures establish the starting point for bandwidth, power, and package selection.

エンジニアリング参考データ: OPA244PA — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose OPA244PA for portable or battery-powered analog circuits that need single-supply operation, 430 kHz bandwidth, and a confirmed 50 uA typical quiescent current in an 8-pin PDIP package. It is a practical general-purpose choice when low current consumption matters more than exceptionally low offset voltage. Consider OP07DNZ when the design is a precision DC amplifier and its approximately 75 uV input offset voltage provides a meaningful improvement over the approximately 700 uV associated with OPA244PA, but verify every pin function and electrical characteristic before substitution. Do not select OPA244UA or OPA244NA/3K as direct replacements for an existing OPA244PA board because their SOT-23-5 packages require a different footprint. If the signal requires rail-to-rail input or output operation, very low offset, or substantially wider bandwidth, choose an amplifier family explicitly designed for that specification instead of treating OPA244PA as a universal solution.

代替品との比較

パラメータ この製品 OP07DNZ
Package 8-pin PDIP 8-pin PDIP
Brand Texas Instruments Analog Devices
Input Offset Voltage Approximately 700 uV Approximately 75 uV

主な差別化要因

  • Lower quiescent current supports portable power budgets (vs OP07DNZ)
  • Moderate signal bandwidth with low-power operation (vs OP07DNZ)
  • Through-hole package supports serviceable and prototype construction (vs OPA244UA)

設計ノート

Place the supply bypass capacitor directly beside the OPA244PA supply and ground pins, using short traces and a low-impedance ground return. Keep the external feedback resistors close to the amplifier input and inverting-input pins to reduce parasitic capacitance and feedback-loop area. When working at the upper end of the 430 kHz bandwidth, use a grounded, short ground plane connection and avoid routing the sensitive input beneath switching or digital traces.

Confirm the complete signal path before selecting the supply. OPA244PA supports single-supply operation up to 36 V, but that maximum does not imply that inputs or outputs can swing across the entire supply range. Check the manufacturer input common-mode and output-swing limits at the intended voltage, and ensure the load current remains compatible with the listed 12 mA output current per channel. Decouple the supply locally to prevent battery wiring resistance from producing supply ripple that appears as amplified signal noise.

Do not substitute OPA244UA or OPA244NA/3K for OPA244PA on an existing board because those versions use a 5-pin SOT-23-5 package rather than an 8-pin PDIP footprint. Likewise, verify every pin function before considering OP07DNZ. Although OP07DNZ has an approximately 75 uV input offset voltage compared with approximately 700 uV for OPA244PA, lower offset does not establish complete pin compatibility, supply compatibility, bandwidth equivalence, or stability.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The OPA244PA cross-reference listing includes RoHS details, but the available material does not explicitly state the compliance result or provide the remaining environmental declarations.

データ検証日: 2026-11-09 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

OPA244PA datasheet OPA244PA pinout OPA244PA datasheet pdf OPA244PA specifications OPA244PA 8-PDIP package OPA244PA 430kHz bandwidth OPA244PA 50uA quiescent current OPA244PA battery powered op amp OPA244PA replacement OPA244PA equivalent OPA244PA vs OP07DNZ OPA244PA price OPA244PA stock Texas Instruments OPA244PA

関連部品&用語

Texas Instruments OPA244PA OPA244 OP07DNZ OPA244UA OPA244NA/3K operational amplifier single op amp voltage-feedback amplifier micropower amplifier signal-conditioning IC amplifier IC semiconductor 430 kHz gain-bandwidth product 50 uA quiescent current single-supply operation 36 V maximum supply voltage 12 mA output current per channel input offset voltage input common-mode range 8-pin PDIP PDIP package family through-hole mounting surface mount
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示