Texas Instruments

OPA552PA - 60V 380mA 12MHz Op Amp | Texas Instruments

部品番号: OPA552PA ✓ 生産中
30 V maximum Vdss 380 mA Id 8-pin PDIP Package
MOQ: 1 |

OPA552PA 概要

Texas Instruments OPA552PA is a high-voltage, high-current operational amplifier with a typical output current of 380 mA, a 60 V power-supply rating, and 12 MHz gain-bandwidth product. The device is offered in an 8-pin PDIP package and is intended for power-buffer, voltage-to-current conversion, and high-current driver applications.

An operational amplifier, or op amp, is a high-gain differential amplifier that uses negative feedback to control gain and improve linearity. The OPA552PA belongs to the high-voltage and high-current amplifier category, combining broad supply-voltage capability with low output impedance. Its hierarchy extends from operational amplifier to voltage-feedback amplifier and analog signal-conditioning IC.

The OPA552PA's 380 mA typical output-current capability is its defining characteristic. It supports the ±4 V to ±30 V supply range shown in product documentation, while the 8-pin PDIP package provides a through-hole option for instrumentation and industrial equipment. Its 12 MHz bandwidth supports faster closed-loop response than narrow-band precision amplifiers. The device also has a 24 V/µs slew-rate specification.

The OPA552 is designed for unity-gain-stable operation and for driving loads requiring substantially more current than a conventional signal op amp. High output-current capability reduces the need for a separate output buffer in voltage-to-current converters, power amplifiers, and actuator interfaces. Because the output stage can dissipate significant power, the package and printed-circuit-board thermal design remain important.

Typical applications include high-current voltage-to-current converters, laser-diode drivers, audio power stages, instrumentation output buffers, and industrial control interfaces. The through-hole PDIP-8 package can also simplify prototyping and repair compared with a fine-pitch surface-mount package. The operating-temperature range of -40 °C to +125 °C supports industrial environments when the complete circuit is qualified for the intended conditions.

For stable operation, follow the manufacturer datasheet when selecting power-supply bypassing, input common-mode limits, output-load limits, and thermal copper. Output current and voltage limits must be treated as simultaneous constraints, and a heat path should be provided before driving sustained high current. Pin assignments must be checked against the package drawing before PCB assembly.

This page organizes the key electrical characteristics, package information, application guidance, and verified drop-in alternatives for OPA552PA. The accompanying comparison and design guidance help engineers distinguish true pin-compatible devices from amplifiers that are merely functionally similar.

ドロップイン代替品: OPA552PA — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: OPA552PA (同一形状・フットプリント) — 相違点: Product Type, Slew Rate, Supply Voltage Range.

Texas Instruments
Product Type: High-voltage, high-current operational amplifier
Slew Rate: 15 V/µs
Supply Voltage Range: 60 V
比較対象 OPA552PA →

OPA551PA

✅ ドロップイン ⚠️ 仕様未検証
Texas Instruments
📦 PDIP-8
High-voltage, high-current operational amplifier · 60 V · 380 mA · 200 mA · 3 MHz · 15 V/µs · Unity-gain stable · 1

価格はお問い合わせください

データシートを見る →

OPA552PA 最大定格&電気的特性

Product Type Single operational amplifier
High-Side Supply Voltage 30 V maximum
Low-Side Supply Voltage -30 V minimum
Total Supply Voltage 60 V maximum
Typical Output Current 380 mA
Gain-Bandwidth Product 12 MHz
Slew Rate 24 V/µs
Supply Voltage Range ±4 V to ±30 V
動作温度範囲 -40 °C to +125 °C
Number of Amplifiers 1 circuit
Gain Configuration Unity-gain stable
パッケージ 8-pin PDIP
実装タイプ Through-hole
カテゴリ General-purpose amplifier
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification unknown

OPA552PA ピン構成

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
ピン 1 NC — Offset null, not connected
ピン 2 IN- — Inverting input
ピン 3 IN+ — Non-inverting input
ピン 4 V- — Negative supply connection
ピン 5 NC — Offset null, not connected
ピン 6 OUT — Output
ピン 7 V+ — Positive supply connection
ピン 8 NC — Offset null, not connected

主な用途

OPA552PA の用途: 6 件s: High-Current Voltage-to-Current Conversion, Laser-Diode and LED Driver, Industrial Instrumentation Output Buffer, Audio Power-Amplifier Output Stage, Power-Supply Control and Feedback, Actuator and Solenoid Drive Interface.

⚡

High-Current Voltage-to-Current Conversion

The OPA552PA fits a voltage-to-current converter because its 380 mA typical output current is well above the usual milliampere range of a conventional signal amplifier. Place the amplifier and its sense resistor so the feedback element controls current through the load. The ±4 V to ±30 V supply range permits high-compliance output conditions, while 12 MHz bandwidth and 24 V/µs slew rate support signals beyond static DC operation. Designers must limit current with the sense network and verify the output does not saturate during startup or fault conditions.

💡

Laser-Diode and LED Driver

OPA552PA can serve as the current-driving element in a laser-diode or high-power LED driver because its output stage provides 380 mA typical drive current. A closed-loop configuration using a sense resistor can improve current regulation across supply and temperature changes. The 60 V maximum supply rating and 24 V/µs slew rate provide headroom for dynamic drive requirements, but the exact output-current and dissipation limits must be respected. Protection, startup behavior, and compliance with device-specific drive limits are essential.

🏭

Industrial Instrumentation Output Buffer

The OPA552PA is useful as an output buffer in industrial instrumentation because it combines a 12 MHz gain-bandwidth product with substantially higher current capability than a precision signal op amp. It can drive downstream cables, transducer interfaces, or control inputs without adding a separate power-buffer stage. Its -40 °C to +125 °C industrial temperature range supports harsh operating environments. Engineers should still assess capacitive loading, output stability, thermal dissipation, and isolation requirements according to the instrumentation architecture.

🎧

Audio Power-Amplifier Output Stage

OPA552PA can provide the final current-driving stage of an audio or power-amplifier design because its 380 mA typical output current is suited to low-ohm loads. The 24 V/µs slew rate and 12 MHz bandwidth preserve large-signal response in feedback-defined amplifier topologies. The device's high-voltage capability also supports elevated supply rails, although excessive dissipation at low load resistance can raise junction temperature rapidly. Use the manufacturer thermal guidance, maintain adequate copper, and verify output swing before selecting the external gain and bias network.

🔧

Power-Supply Control and Feedback

OPA552PA can implement high-current error-amplifier or feedback functions in specialized power-supply control circuits. Its unity-gain stability, wide bandwidth, and high output-current capability allow direct drive of a power transistor or passive load while preserving loop response. The ±30 V per-rail operating capability accommodates elevated bias rails commonly used in high-voltage control systems. Designers must ensure the output-stage voltage and current remain within their simultaneous ratings and should compensate the loop for the specific power stage and compensation network.

🏭

Actuator and Solenoid Drive Interface

OPA552PA is suitable for high-current actuator interfaces when the driver requires more output current and bandwidth than a standard operational amplifier. In a feedback-controlled solenoid or motor-current stage, the amplifier can supply the command signal while a sense element closes the loop. The 60 V supply capability and 380 mA typical output current support robust industrial interfaces, while the 24 V/µs slew rate allows relatively fast current transitions. Flyback paths, saturation recovery, inductive voltage limits, and thermal rise require careful design.

What is the operating voltage range of OPA552PA?
The OPA552PA operates from ±4 V to ±30 V, corresponding to a total supply-voltage span of 60 V. According to the Texas Instruments OPA552 product page, the device is intended for high-voltage operation and is available in PDIP-8 and SOIC-8 packages. Designers should maintain the supply rails within the specified range and include adequate bypassing close to the positive and negative supply pins.
What is the output-current capability of OPA552PA?
The OPA552PA can source or sink a typical output current of 380 mA, according to the Texas Instruments product page. This unusually high current capability distinguishes it from conventional precision op amps. It is useful in voltage-to-current converters, power buffers, and actuator drivers, although sustained operation near the limit requires careful verification of output swing, load impedance, package dissipation, and thermal resistance.
What is the bandwidth and slew rate of OPA552PA?
The OPA552PA has a 12 MHz gain-bandwidth product and a 24 V/µs slew rate. The Texas Instruments product page identifies the amplifier as wide-bandwidth, while published distributor documentation lists the 12 MHz bandwidth and 24 V/µs slew rate. These characteristics make the device suitable for signal amplification and load-driving circuits that need substantially more bandwidth than low-noise precision amplifiers.
Where can I download the OPA552PA datasheet PDF?
The official OPA552PA datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/opa552.pdf. The manufacturer document provides the authoritative pin configuration, electrical characteristics, application information, and package drawings. Use the ordering information in the document to confirm that OPA552PA denotes the PDIP-8 package option before assigning PCB connections.
Where can I find the OPA552PA pinout?
The OPA552PA pinout is shown in the pin-configuration section of the Texas Instruments OPA552 datasheet. The 8-pin PDIP follows the standard single-op-amp arrangement: offset null, inverting input, non-inverting input, negative supply, positive supply, output, positive supply, and negative supply across pins 1 through 8. Verify the diagram before fabrication because unused offset-null positions must remain unconnected.
Is OPA552PA suitable for high-current voltage-to-current conversion?
Yes, the OPA552PA is suitable for a high-current voltage-to-current converter because its typical output current is 380 mA and its supply range extends to ±30 V. A Texas Instruments support discussion specifically identifies OPA552 use in a voltage-to-current converter for an approximately 200 mA alternating-current output. Feedback and sense-resistor design must limit current and prevent output saturation.
What is the best drop-in replacement for OPA552PA?
OPA551PA is the closest documented same-package replacement because it uses an 8-pin PDIP configuration and shares the 60 V high-voltage capability of the OPA552 family. Its output-current capability is lower, however, so it is a valid replacement only when the required load current remains within its limits. Confirm offset voltage, output swing, thermal behavior, and every pin connection before production use.
Can OPA551PA replace OPA552PA in an existing circuit?
OPA551PA can replace OPA552PA only in circuits whose load current, output swing, and thermal demand remain below the OPA551 limits. Both devices are high-voltage 60 V-class single operational amplifiers, but the OPA552PA provides a typical 380 mA output current while the OPA551 family is described as supporting 200 mA. The PDIP footprint is compatible, but the reduced current capability makes this a conditional rather than universal substitution.
When should I choose OPA552PA over OPA551PA?
Choose OPA552PA when the circuit requires more than 200 mA of output drive, uses the additional current for a power buffer, or needs a wider margin around its 380 mA typical rating. OPA551PA may be appropriate when the load is lighter and the required operating point is safely below its 200 mA-class capability. Both use the high-voltage 60 V architecture, but current rating, thermal dissipation, and output swing must be checked independently.
Is OPA552PA suitable for industrial instrumentation?
The OPA552PA is suitable for industrial instrumentation when the circuit respects its electrical and thermal limits. Texas Instruments specifies operation from -40 °C to +125 °C and provides an 8-pin PDIP option that is convenient for through-hole designs. The broad temperature range supports industrial environments, but system qualification, enclosure temperature, supply quality, and output-current dissipation still require validation at the assembly level.
What can replace OPA552PA?
OPA551PA is the most supportable drop-in replacement identified for the OPA552PA because it shares the PDIP-8 format and 60 V operating class. Its 200 mA-class output capability is lower than the OPA552PA's 380 mA typical capability, so the original load must be checked carefully. Other amplifier families with different packages or lower voltage ratings should not be treated as drop-in replacements without a PCB redesign.
Is OPA552PA the same as OPA551PA?
No, the OPA552PA and OPA551PA are related but not electrically identical. Both are 60 V high-voltage, high-current operational amplifiers in an 8-pin PDIP format, while the OPA552PA has a listed typical output current of 380 mA and the OPA551 family is described as a 200 mA-class device. Their shared footprint enables substitution only after verifying current, output swing, thermal load, and stability.
What are the key specifications of OPA552PA that engineers should know?
The key OPA552PA specifications are a 60 V maximum power-supply rating, ±4 V to ±30 V operating range, 380 mA typical output current, 12 MHz gain-bandwidth product, and 24 V/µs slew rate. Texas Instruments also specifies unity-gain stability and operation from -40 °C to +125 °C. These figures make the device a high-current, wide-bandwidth amplifier rather than a conventional low-power precision op amp.
How should I handle thermal dissipation with OPA552PA?
Treat thermal design as part of the output-current requirement because power dissipated in the output stage grows with output voltage and current. For an engineering estimate, use Pdiss = (VOUT - VSWING) × IOUT for the conducting output device and compare the result with the package and PCB thermal limits. A Texas Instruments application note for the OPA55x family should be consulted for the final thermal calculation and copper guidance.
Where can I request a quote and current lead time for OPA552PA?
Use the Request a Quote form on this page to request the current OPA552PA commercial terms, stock position, minimum order quantity, and lead time. Quote-based purchasing is appropriate because amplifier inventory and production schedules can change independently of the electrical specifications. The part number OPA552PA should be stated exactly so the inquiry is matched to the 8-pin PDIP configuration rather than another package option.

エンジニアリング参考データ: OPA552PA — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose OPA552PA when the circuit needs a high-output-current, wide-bandwidth operational amplifier on a ±4 V to ±30 V supply, particularly for voltage-to-current conversion, actuator interfaces, or power-buffer stages. Its 380 mA typical output current and 24 V/µs slew rate make it more appropriate than a standard precision op amp when the load is electrically demanding. OPA551PA is the closest same-package alternative when the required output current remains safely within the lower 200 mA-class capability. A package or voltage-class change should not be treated as a drop-in substitution. For either device, verify output swing, load stability, supply bypassing, short-circuit behavior, and thermal dissipation under the worst operating condition.

代替品との比較

パラメータ この製品 OPA551PA
Package PDIP-8 PDIP-8
Brand Texas Instruments Texas Instruments
Product Type Single operational amplifier Single high-voltage operational amplifier
Maximum Total Supply Voltage 60 V 60 V
Typical Output Current 380 mA 200 mA
Gain Configuration Unity-gain stable Unity-gain stable

主な差別化要因

  • Higher nominal output-current capability (vs OPA551PA)
  • Wide-bandwidth output drive (vs OPA551PA)
  • High-voltage through-hole option (vs OPA551PA)

設計ノート

Calculate output-stage dissipation from the actual output voltage, load current, and output swing rather than relying on supply voltage alone. Estimated: for a conducting output device, Pdiss = (VOUT - VSWING) × IOUT; at 5 V across the output device and 0.38 A, the estimate is 1.9 W. Use that value with package and PCB thermal data to size copper paths and determine whether a heat sink is required.

Place power-supply bypass capacitors close to pins 4 and 7 and keep high-current output routing separate from sensitive input and feedback traces. The PDIP-8 format permits through-hole assembly, but lead inductance can still affect stability with fast slew rate. Use short return paths, a ground plane where appropriate, and a physically stable feedback network to minimize oscillation, output overshoot, and thermal gradients.

Do not treat the 380 mA typical output-current figure as a guaranteed continuous rating under every load and temperature. Output swing, supply polarity, channel stability, short-circuit behavior, and package dissipation can limit usable current before the nominal current is reached. Check the operating-point constraints in the manufacturer datasheet and include startup, overload, and fault-current protection in the system design.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The manufacturer product page identifies the OPA55x family as an extended-industrial-temperature product but does not provide a package-specific compliance declaration for OPA552PA in the cited content.

データ検証日: 2026-11-14 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

opa552pa datasheet OPA552PA pinout OPA552PA datasheet pdf OPA552PA specifications OPA552PA equivalent OPA552PA replacement OPA552PA cross reference OPA552PA vs OPA551PA OPA552PA PDIP-8 footprint OPA552PA high current op amp Texas Instruments OPA552PA OPA552PA price

関連部品&用語

Texas Instruments OPA552PA OPA552 OPA551PA operational amplifier voltage-feedback amplifier high-current op amp high-voltage amplifier analog signal-conditioning IC PDIP-8 DIP package through-hole package 60 V power supply 380 mA output current 12 MHz gain-bandwidth product 24 V/µs slew rate unity-gain stable voltage-to-current converter current-source driver power buffer industrial instrumentation laser-diode driver RoHS REACH
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示