OPA552PA - 60V 380mA 12MHz Op Amp | Texas Instruments
MPN: OPA552PA ✓ Hoạt độngOPA552PA Tóm tắt
An operational amplifier, or op amp, is a high-gain differential amplifier that uses negative feedback to control gain and improve linearity. The OPA552PA belongs to the high-voltage and high-current amplifier category, combining broad supply-voltage capability with low output impedance. Its hierarchy extends from operational amplifier to voltage-feedback amplifier and analog signal-conditioning IC.
The OPA552PA's 380 mA typical output-current capability is its defining characteristic. It supports the ±4 V to ±30 V supply range shown in product documentation, while the 8-pin PDIP package provides a through-hole option for instrumentation and industrial equipment. Its 12 MHz bandwidth supports faster closed-loop response than narrow-band precision amplifiers. The device also has a 24 V/µs slew-rate specification.
The OPA552 is designed for unity-gain-stable operation and for driving loads requiring substantially more current than a conventional signal op amp. High output-current capability reduces the need for a separate output buffer in voltage-to-current converters, power amplifiers, and actuator interfaces. Because the output stage can dissipate significant power, the package and printed-circuit-board thermal design remain important.
Typical applications include high-current voltage-to-current converters, laser-diode drivers, audio power stages, instrumentation output buffers, and industrial control interfaces. The through-hole PDIP-8 package can also simplify prototyping and repair compared with a fine-pitch surface-mount package. The operating-temperature range of -40 °C to +125 °C supports industrial environments when the complete circuit is qualified for the intended conditions.
For stable operation, follow the manufacturer datasheet when selecting power-supply bypassing, input common-mode limits, output-load limits, and thermal copper. Output current and voltage limits must be treated as simultaneous constraints, and a heat path should be provided before driving sustained high current. Pin assignments must be checked against the package drawing before PCB assembly.
This page organizes the key electrical characteristics, package information, application guidance, and verified drop-in alternatives for OPA552PA. The accompanying comparison and design guidance help engineers distinguish true pin-compatible devices from amplifiers that are merely functionally similar.
Bộ thay thế dễ dàng lắp đặt cho OPA552PA — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với OPA552PA (cùng hình factor và footprint) — khác nhau ở Product Type, Slew Rate, Supply Voltage Range.
OPA551PA
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →OPA552PA Tỷ lệ tối đa & tính chất điện
| Product Type | Single operational amplifier |
| High-Side Supply Voltage | 30 V maximum |
| Low-Side Supply Voltage | -30 V minimum |
| Total Supply Voltage | 60 V maximum |
| Typical Output Current | 380 mA |
| Gain-Bandwidth Product | 12 MHz |
| Slew Rate | 24 V/µs |
| Supply Voltage Range | ±4 V to ±30 V |
| Khoảng nhiệt độ hoạt động | -40 °C to +125 °C |
| Number of Amplifiers | 1 circuit |
| Gain Configuration | Unity-gain stable |
| Hộp | 8-pin PDIP |
| Kiểu lắp đặt | Through-hole |
| Danh mục | General-purpose amplifier |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | unknown |
Cấu hình chân OPA552PA
| Chân 1 | NC — Offset null, not connected |
| Chân 2 | IN- — Inverting input |
| Chân 3 | IN+ — Non-inverting input |
| Chân 4 | V- — Negative supply connection |
| Chân 5 | NC — Offset null, not connected |
| Chân 6 | OUT — Output |
| Chân 7 | V+ — Positive supply connection |
| Chân 8 | NC — Offset null, not connected |
Ứng dụng tiêu biểu
OPA552PA phù hợp cho 6 Áp dụngs: High-Current Voltage-to-Current Conversion, Laser-Diode and LED Driver, Industrial Instrumentation Output Buffer, Audio Power-Amplifier Output Stage, Power-Supply Control and Feedback, Actuator and Solenoid Drive Interface.
High-Current Voltage-to-Current Conversion
The OPA552PA fits a voltage-to-current converter because its 380 mA typical output current is well above the usual milliampere range of a conventional signal amplifier. Place the amplifier and its sense resistor so the feedback element controls current through the load. The ±4 V to ±30 V supply range permits high-compliance output conditions, while 12 MHz bandwidth and 24 V/µs slew rate support signals beyond static DC operation. Designers must limit current with the sense network and verify the output does not saturate during startup or fault conditions.
Được đề xuất
Laser-Diode and LED Driver
OPA552PA can serve as the current-driving element in a laser-diode or high-power LED driver because its output stage provides 380 mA typical drive current. A closed-loop configuration using a sense resistor can improve current regulation across supply and temperature changes. The 60 V maximum supply rating and 24 V/µs slew rate provide headroom for dynamic drive requirements, but the exact output-current and dissipation limits must be respected. Protection, startup behavior, and compliance with device-specific drive limits are essential.
Được đề xuất
Industrial Instrumentation Output Buffer
The OPA552PA is useful as an output buffer in industrial instrumentation because it combines a 12 MHz gain-bandwidth product with substantially higher current capability than a precision signal op amp. It can drive downstream cables, transducer interfaces, or control inputs without adding a separate power-buffer stage. Its -40 °C to +125 °C industrial temperature range supports harsh operating environments. Engineers should still assess capacitive loading, output stability, thermal dissipation, and isolation requirements according to the instrumentation architecture.
Được đề xuất
Audio Power-Amplifier Output Stage
OPA552PA can provide the final current-driving stage of an audio or power-amplifier design because its 380 mA typical output current is suited to low-ohm loads. The 24 V/µs slew rate and 12 MHz bandwidth preserve large-signal response in feedback-defined amplifier topologies. The device's high-voltage capability also supports elevated supply rails, although excessive dissipation at low load resistance can raise junction temperature rapidly. Use the manufacturer thermal guidance, maintain adequate copper, and verify output swing before selecting the external gain and bias network.
Được đề xuất
Power-Supply Control and Feedback
OPA552PA can implement high-current error-amplifier or feedback functions in specialized power-supply control circuits. Its unity-gain stability, wide bandwidth, and high output-current capability allow direct drive of a power transistor or passive load while preserving loop response. The ±30 V per-rail operating capability accommodates elevated bias rails commonly used in high-voltage control systems. Designers must ensure the output-stage voltage and current remain within their simultaneous ratings and should compensate the loop for the specific power stage and compensation network.
Được đề xuất
Actuator and Solenoid Drive Interface
OPA552PA is suitable for high-current actuator interfaces when the driver requires more output current and bandwidth than a standard operational amplifier. In a feedback-controlled solenoid or motor-current stage, the amplifier can supply the command signal while a sense element closes the loop. The 60 V supply capability and 380 mA typical output current support robust industrial interfaces, while the 24 V/µs slew rate allows relatively fast current transitions. Flyback paths, saturation recovery, inductive voltage limits, and thermal rise require careful design.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho OPA552PA — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | OPA551PA |
|---|---|---|
| Package | PDIP-8 | PDIP-8 |
| Brand | Texas Instruments | Texas Instruments |
| Product Type | Single operational amplifier | Single high-voltage operational amplifier |
| Maximum Total Supply Voltage | 60 V | 60 V |
| Typical Output Current | 380 mA | 200 mA |
| Gain Configuration | Unity-gain stable | Unity-gain stable |
Bảo phân biệt quan trọng
- Higher nominal output-current capability (vsOPA551PA)
- Wide-bandwidth output drive (vsOPA551PA)
- High-voltage through-hole option (vsOPA551PA)
Ghi chú thiết kế
Calculate output-stage dissipation from the actual output voltage, load current, and output swing rather than relying on supply voltage alone. Estimated: for a conducting output device, Pdiss = (VOUT - VSWING) × IOUT; at 5 V across the output device and 0.38 A, the estimate is 1.9 W. Use that value with package and PCB thermal data to size copper paths and determine whether a heat sink is required.
Place power-supply bypass capacitors close to pins 4 and 7 and keep high-current output routing separate from sensitive input and feedback traces. The PDIP-8 format permits through-hole assembly, but lead inductance can still affect stability with fast slew rate. Use short return paths, a ground plane where appropriate, and a physically stable feedback network to minimize oscillation, output overshoot, and thermal gradients.
Do not treat the 380 mA typical output-current figure as a guaranteed continuous rating under every load and temperature. Output swing, supply polarity, channel stability, short-circuit behavior, and package dissipation can limit usable current before the nominal current is reached. Check the operating-point constraints in the manufacturer datasheet and include startup, overload, and fault-current protection in the system design.
Thông tin tuân thủ
The manufacturer product page identifies the OPA55x family as an extended-industrial-temperature product but does not provide a package-specific compliance declaration for OPA552PA in the cited content.