OPA77EP - Precision Op Amp in DIP-8 BB | Texas Instruments
部品番号: OPA77EP ✓ 生産中OPA77EP 概要
An operational amplifier, commonly abbreviated op amp, is an analog integrated circuit that amplifies the voltage difference between its two inputs. In its standard negative-feedback configuration, an op amp belongs to the voltage-feedback amplifier hierarchy and ultimately to the broader integrated-circuit and signal-conditioning categories. Precision op amps are selected when low offset, stable bias behavior, low distortion, or accurate closed-loop gain are more important than wide bandwidth, low cost, or minimum power consumption.
OPA77EP is positioned for precision signal conditioning rather than general-purpose amplification. The DIP-8 BB outline provides eight external connections, allowing the device to be evaluated without changing a through-hole board footprint. Compared with small-package alternatives, its physically accessible pins simplify probing and troubleshooting. Compared with a lower-cost general-purpose amplifier, however, designers should verify the exact performance limits in the manufacturer datasheet because the supplied web results contain no verified numerical gain, noise, or current figures.
The listed manufacturer associations are Texas Instruments and Analog Devices, reflecting the device's legacy lineage and distributor cataloging. This makes the exact data sheet, ordering suffix, test grade, and manufacturing source important during procurement. A board designed around OPA77EP should not assume that every similarly named OP77 or OPA77 orderable part has identical pin functions, temperature rating, or qualification status. The manufacturer ordering information associated with the OPA77EP suffix must be confirmed before approval.
Typical engineering uses include precision instrumentation, low-level sensor conditioning, buffered references, analog measurement chains, and laboratory equipment where signal integrity is more important than minimum package area. In such systems, the OPA77EP may sit close to sensors to limit noise pickup and provide gain before conversion or further processing. Designers should also consider newer precision amplifiers when rail-to-rail input or output operation, smaller size, lower power, or automated surface-mount assembly is required, because those properties cannot be established from the supplied OPA77EP search results.
The principal design precaution is to avoid making electrical claims from distributor search snippets alone. Confirm the pinout, supply voltage, common-mode range, output swing, input bias current, offset voltage, stability requirements, and recommended external components in the document associated with the exact ordering code. If the circuit is new and no verified OPA77EP data sheet is available, prototype only after obtaining that document and confirming that the selected DIP-8 BB part is pin-compatible.
This page consolidates the verified OPA77EP package identification, distributor availability references, procurement links, and same-footprint cross-reference evidence. It also distinguishes documented facts from unavailable electrical parameters, helping engineers evaluate whether OPA77EP is appropriate without substituting unverified specifications for manufacturer data.
ドロップイン代替品: OPA77EP — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
OPA77GP
✅ ドロップイン価格はお問い合わせください
データシートを見る →OPA77EP 最大定格＆電気的特性
| Product Type | Precision operational amplifier |
| Manufacturer | Texas Instruments / Analog Devices catalog association |
| パッケージ | DIP-8 BB |
| ピン数 | 8 pins |
| 実装タイプ | Through-hole DIP |
OPA77EP dip-8 bb ピン配置ガイド
OPA77EP (dip-8 bb パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: OPA77EP.
詳細は データシート をご参照ください。
主な用途
OPA77EP の用途: 6 件s: Precision Instrumentation, Low-Level Sensor Signal Conditioning, Buffered Voltage Reference, Analog Measurement Front End, Laboratory Sensor Interface, Legacy Analog Control.
Precision Instrumentation
OPA77EP can be evaluated as a precision signal-conditioning amplifier in laboratory and industrial instrumentation because the supplied listings classify it as a precision op amp and identify its DIP-8 BB package. It would typically amplify a low-level sensor or bridge signal before digitization, while the accessible through-hole pins simplify prototype wiring and measurement. The application remains conditional on confirming offset, bias current, noise, common-mode range, and supply limits in the exact manufacturer document; no numerical OPA77EP ratings are available in the supplied snippets. For a production design, also check input/output stability and recommended compensation before committing the circuit.
おすすめ
Low-Level Sensor Signal Conditioning
OPA77EP is a potential candidate for conditioning low-amplitude sensor outputs where offset and bias behavior matter more than package area. Placing the amplifier close to the sensor in a through-hole prototype can reduce parasitic pickup and provide a straightforward way to characterize input bias, offset, and noise. The available evidence confirms only the precision-op-amp classification and 8-pin DIP-8 BB package; input bias current, input-voltage range, noise density, and common-mode limits remain unavailable. The sensor interface should therefore be signed off only after checking the exact OPA77EP datasheet and measuring the complete source impedance and signal bandwidth.
おすすめ
Buffered Voltage Reference
OPA77EP can be investigated as a buffer for a low-level reference in test and measurement systems. The precision designation suggests appropriate investigation for offset-sensitive reference networks, but the supplied distributor snippets do not establish input offset, drift, bias current, output impedance, or capacitive-load stability. Those characteristics determine whether a simple unity-gain buffer is suitable. Designers should verify input and output ranges, load-current capability, stability with the selected reference and cable capacitance, and power-supply requirements in the exact manufacturer data before using OPA77EP in this role.
おすすめ
Analog Measurement Front End
OPA77EP is suitable for evaluation as the first gain stage of an analog measurement chain where a legacy DIP footprint and precision-amplifier classification are priorities. A practical implementation would use the eight-pin through-hole package to gain access to signal, feedback, power, and possible nulling connections, subject to confirmation from the manufacturer pinout. Because the verified excerpts do not provide gain-bandwidth, slew-rate, overload recovery, or common-mode data, the maximum input frequency and output amplitude must be established through documentation and measurement. Commercial instrumentation should not infer those limits from the OPA77EP name alone.
おすすめ
Laboratory Sensor Interface
OPA77EP can support a laboratory sensor-interface prototype where an accessible eight-pin DIP package simplifies assembly, troubleshooting, and substitution testing. The useful design flow is to obtain the exact OPA77EP document, verify the eight connections, then characterize offset, bias current, noise, and output drive with the intended sensor and test equipment. The verified web results do not contain those electrical values, so this use case should not be released to production based only on distributor metadata. Keep the prototype grounded and follow the manufacturer input and output common-mode limits once they are confirmed.
おすすめ
Legacy Analog Control
OPA77EP may fit a legacy analog-control board that was designed around an eight-pin DIP precision operational amplifier. The DIP-8 BB package can simplify restoration or repair of through-hole equipment without introducing a new surface-mount footprint. Compatibility is not automatically guaranteed, however: the suffix, pin functions, compensation requirements, supply limits, and electrical ratings must match the original circuit. Because the supplied data confirms only the package identity and precision classification, engineers should compare the original schematic with the manufacturer OPA77EP pinout and conduct temperature, offset, and stability measurements before deploying the part in safety- or mission-critical control systems.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: OPA77EP — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | OPA77GP |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | DIP-8 BB | 8-PDIP |
| Product Classification | Precision operational amplifier | Standard general-purpose precision amplifier |
主な差別化要因
- Targeted legacy package identity （vs OPA77GP)
- Precision-focused cataloging （vs OPA77GP)
- Broader verified sourcing coverage （vs OPA77GP)
設計ノート
Do not treat the DIP-8 outline as proof of pin compatibility. Obtain the manufacturer document associated with the exact OPA77EP ordering suffix and compare every pin function, especially offset null, compensation, supply, and output connections, with the existing schematic. The supplied web results identify an 8-pin BB package but do not provide individual pin assignments. Marking the pinout as unverified is deliberate and prevents an otherwise plausible but potentially destructive connection error.
Confirm the supported supply voltage and quiescent-current limits before connecting external power. The supplied snippets contain no electrical ratings, so neither value can be responsibly inferred from the precision classification. Review input/output common-mode limits and output swing at the intended load, then verify that the power source can support startup, output current, and any capacitive load. A prototype should use a current-limited supply until operating behavior has been confirmed against the exact manufacturer data.
For a through-hole precision amplifier, keep the feedback loop compact and place compensation components where the manufacturer specifies. Route the inverting input and feedback path away from high-current or switching nodes to reduce pickup, and use a low-noise ground reference. Because input bias, noise, and common-mode specifications are unavailable in the supplied data, the final layout should be reviewed against the exact OPA77EP datasheet and validated with the intended source impedance.
Do not calculate an OPA77EP thermal design from an invented dissipation or thermal-resistance value; neither is present in the verified results. After obtaining the manufacturer documentation, calculate worst-case dissipation from the actual supply voltage, output voltage, load current, and quiescent current. Verify that the through-hole board provides adequate copper and airflow, and use the package-specific thermal information from the datasheet rather than a generic DIP estimate.
コンプライアンス情報
The supplied OPA77EP distributor and cross-reference records do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields remain unknown pending a current manufacturer compliance declaration for the exact ordering code.
