P1010NSE5FFA - QorIQ P1010 SoC 667 MHz e500v2 | NXP
部品番号: P1010NSE5FFA ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $48.72 | $48.72 |
| 10 | $44.2 | $442.00 |
| 100 | $39.85 | $3,985.00 |
| 500 | $36.1 | $18,050.00 |
| 1,000 | $32.4 | $32,400.00 |
P1010NSE5FFA 概要
A communications processor (or SoC, system-on-chip) is a single integrated circuit that combines CPU cores, network/IO peripherals, memory interfaces, and security engines to serve as the central processing hub for embedded networking and industrial equipment. In the broader hierarchy, the P1010NSE5FFA belongs to QorIQ -> PowerQUICC III family -> Power Architecture networking SoCs -> communications processors. This taxonomy is important because QorIQ P1 devices target cost- and power-sensitive workloads downstream of higher-tier P2/P4 platforms.
Key features include a 32-bit Power Architecture e500v2 core with double-precision FPU, dual GbE MACs, two PCIe Gen1 controllers, two SATA-II interfaces, USB 2.0 host/device, SPI, UART, I2C, SDHC, 16-bit DDR3/DDR3L controller with ECC, and SEC 4.4 hardware crypto accelerator supporting AES, 3DES, RSA, and elliptic curves. The trusted-boot engine, JTAG, and on-chip PLL complete the integrated BOM.
Architecturally the device combines a book-E/e500v2 application core with platform glue that integrates most of the peripherals that previously required external ASICs - meaning a 667 MHz single-core SoC can replace a legacy PowerQUICC II + companion chip design, cutting PCB area and BOM. The 45 nm process and low core voltage keep TDP within typical industrial thermal envelopes.
Typical applications include industrial Ethernet gateways, smart-grid/energy routers, secure IoT gateways, factory-floor protocol converters, networked printers, and small-form-factor industrial firewalls. The integrated SEC makes it particularly suited to VPN/secure tunneling with hardware offload.
When designing with this part, follow the QorIQ reference-board layout for DDR3 trace matching, keep the analog power rails well decoupled, and confirm the exact pinctrl multiplexing against the Reference Manual since the 425-ball TEBGA-1 is dense and footprints are mechanically single-sourced.
This page synthesizes distributor stock, same-family NXP drop-in variants, packaging-grade equivalents, and trusted-boot design notes unavailable on bare Digi-Key catalog listings.
ドロップイン代替品: P1010NSE5FFA — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: P1010NSE5FFA （同一形状・フットプリント） — 相違点: Core Architecture, Operating Temperature, Package, Processor Type, RoHS Status.
クイック比較ツール — 並列比較する代替部品を選択:
P1010NSN5FFA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P1010NXE5FFA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P1014NSE5FFA
✅ ドロップイン✓ 在庫あり
$25.1 / 個
データシートを見る →P1010NSE5MFA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P1010NSE5FFA 最大定格＆電気的特性
| Processor Type | PowerPC e500v2 (single core) |
| Core Architecture | Power Architecture book-E, 32-bit |
| CPU Frequency (Industrial Grade) | 667 MHz |
| FPU | Double-precision floating-point unit |
| Co-Processors / Security Engine | SEC 4.4 (AES, 3DES, RSA, ECC) |
| RAM Controller | DDR3 / DDR3L with ECC, 16-bit bus |
| Ethernet | 2x 10/100/1000 Mbps (RGMII) |
| PCIe | 2x PCIe Gen1 controllers |
| SATA | 2x SATA-II |
| USB | USB 2.0 host / device |
| Other IO | SPI, UART, I2C, SDHC, GPIO |
| Trusted Boot | Yes - secure boot / tamper detection |
| パッケージ | 425-TEBGA-1 (19x19 mm) |
| 動作温度 | 0 °C to +105 °C (industrial) |
| Process Node | 45 nm |
| RoHS Compliance | RoHS Compliant |
| Lead Status | Lead Free |
| Packaging (Shipping) | Tray |
P1010NSE5FFA 425-tebga-1 (19x19 mm) ピン配置ガイド
P1010NSE5FFA (425-tebga-1 (19x19 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: P1010NSE5FFA.
詳細は データシート をご参照ください。
主な用途
P1010NSE5FFA の用途: 6 件s: Industrial Ethernet Gateway, Smart-Grid Energy Router, Secure IoT Edge Gateway, Factory-Floor Protocol Converter, Networked Industrial Printer, Small-Form-Factor Industrial Firewall.
Industrial Ethernet Gateway
The P1010NSE5FFA fits industrial Ethernet gateways because it integrates two GbE MACs with RGMII and SEC 4.4 crypto acceleration in a single 425-TEBGA-1 package. Its 667 MHz e500v2 core delivers enough computation for packet-classification and IPSec tunneling while staying within industrial thermal envelopes. Placed on the gateway main board, the SoC pairs with external SPI NOR flash for secure boot and DDR3L memory for runtime workspace. Unlike a discrete CPU-plus-NPU architecture, the integrated crypto engine handles AES-GCM and RSA at line rate, eliminating the need for a companion ASIC and reducing PCB area by 30-40 percent versus legacy PowerQUICC designs.
おすすめ
Smart-Grid Energy Router
Smart-grid energy routers demand deterministic networking, hardware VPN, and industrial-grade reliability over a 10+ year lifecycle. The P1010NSE5FFA is well-suited because its 16-bit DDR3L controller with ECC protects against single-bit memory errors in fielded equipment, while the SEC 4.4 engine handles DNP3 and IEC 61850 secure tunneling at line rate. Its 0-105 °C industrial temperature grade supports cabinet-mounted deployments. The SoC replaces a legacy MCU-plus-NPU stack, lowering system BOM cost while keeping the SEC engine accelerating AES-256-GCM and RSA-2048 by a factor of 10-50 over software implementations.
おすすめ
Secure IoT Edge Gateway
Secure IoT edge gateways aggregate sensor traffic and forward encrypted telemetry to cloud backends. The P1010NSE5FFA fits because SEC 4.4 (AES, 3DES, RSA, ECC) plus trusted-boot engine provide a hardened root-of-trust for TLS-terminating IoT gateways. Its two PCIe lanes can host a Wi-Fi 6 or cellular modem module, while the integrated GbE MACs handle both WAN and LAN side. Placed on a custom carrier board with SPI flash and DDR3L, this SoC becomes a complete edge gateway that securely boots, performs at line-rate TLS, and routes IoT traffic to multiple cloud brokers without needing external crypto ASICs.
おすすめ
Factory-Floor Protocol Converter
Factory-floor protocol converters bridge Modbus, PROFINET, EtherNet/IP, and EtherCAT networks, demanding deterministic throughput and industrial-grade reliability. The P1010NSE5FFA fits because its 667 MHz e500v2 core plus dual GbE MACs can run multiple industrial-protocol stacks concurrently while SEC 4.4 protects factory traffic. Its 0-105 °C industrial temperature grade handles cabinet environments. Pair it with an external PHY for industrial bus isolation and the SoC becomes the central protocol-translation hub, replacing legacy PowerQUICC III designs with a modern single-SoC solution that cuts board area and BOM by approximately 30 percent.
おすすめ
Networked Industrial Printer
Networked industrial printers require a TCP/IP stack with embedded web management, secure firmware update, and reliable print-job queuing. The P1010NSE5FFA's e500v2 core plus GbE MAC plus USB 2.0 host port enables a complete embedded print-server design. DDR3L with ECC protects against memory corruption during firmware updates, and the trusted-boot engine ensures only signed firmware executes. Placed on the printer mainboard with 256 MB DDR3L and 64 MB SPI NOR, this SoC provides industrial-grade reliability with low power consumption, replacing legacy ARM9 designs while delivering equivalent or better cost.
おすすめ
Small-Form-Factor Industrial Firewall
Small-form-factor industrial firewalls require IPSec/SSL acceleration, multi-gigabit packet handling, and reliable long-life operation. The P1010NSE5FFA is suitable because its 667 MHz e500v2 core plus dual GbE plus SEC 4.4 handles IPsec traffic at line-rate while the industrial 0-105 °C rating supports cabinet-mounted deployment. The two PCIe lanes allow for expansion cards (4G/5G modem, additional ports), and the trusted-boot engine guards the firewall appliance against tampering. Reference designs in the QorIQ P1010QDS board accelerate industrial firewall product development.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: P1010NSE5FFA — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | P1010NSN5FFA | P1010NXE5FFA | P1014NSE5FFA | P1010NSE5MFA |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors (Freescale) | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 425-TEBGA-1 (19x19 mm) | 425-TEBGA-1 (19x19 mm) - same | 425-TEBGA-1 (19x19 mm) - same | 425-TEBGA-1 (19x19 mm) - same | 425-TEBGA-1 (19x19 mm) - same |
| CPU Frequency | 667 MHz | 667 MHz | 667 MHz | 667 MHz | 667 MHz |
| Temperature Grade | Industrial 0-105 °C | Commercial 0-70 °C | Extended -40 to +105 °C | Industrial 0-105 °C | Industrial 0-105 °C |
| SEC 4.4 Crypto Accelerator | Yes | Yes | Yes | No (P1014 omits SEC) | Yes |
| DDR3/DDR3L Memory Controller | 16-bit, ECC support | 16-bit, ECC support | 16-bit, ECC support | 16-bit, ECC support | 16-bit, ECC support |
| Ethernet | 2x GbE (RGMII) | 2x GbE (RGMII) | 2x GbE (RGMII) | 2x GbE (RGMII) | 2x GbE (RGMII) |
| Lifecycle Status | Obsolete (allocation-only) | Obsolete (allocation-only) | Obsolete (allocation-only) | Obsolete (allocation-only) | Obsolete (allocation-only) |
| Lead-Free / RoHS | Yes / RoHS Compliant | Yes / RoHS Compliant | Yes / RoHS Compliant | Yes / RoHS Compliant | Yes / RoHS Compliant |
主な差別化要因
- Industrial 0-105 °C temperature range （vs P1010NSN5FFA)
- Integrated SEC 4.4 hardware crypto acceleration （vs P1014NSE5FFA)
- Lower frequency variant at lower price point （vs P1010NXN5FFA (800 MHz))
設計ノート
P1010 boot-mode pins (cfg_rcw_src, cfg_rom_loc) must be latched on PORESET deassertion. Many prototype bring-ups fail at first power-up because the RCW (Reset Configuration Word) source is mis-selected. Always populate 10 kohm pull-up/pull-down on cfg pins per the QorIQ P1010 Reference Manual to match the desired boot source (NOR flash, NAND, SDHC, or SPI). Validate RCW contents with the cw_utility before attempting PCIe enumeration.
The 425-TEBGA-1 package (19x19 mm, 1.0 mm pitch) requires a 4-layer PCB minimum with continuous ground plane beneath the die for thermal dissipation and signal reference. Route DDR3 traces with 50 ohm controlled impedance and length matching within ±25 mil to the DQS strobe pairs. Use a 0402 0.1 uF decoupling cap within 2 mm of every VDD/VSS ball pair; add four 10 uF bulk caps around the SoC perimeter. Follow the QorIQ P1010QDS reference board stackup exactly to avoid timing-margin violations on the DDR3L interface.
At 667 MHz full-load with both GbE and SEC active, the P1010NSE5FFA dissipates approximately 3.5 W typical. With theta_JA around 25 C/W (still air, JEDEC 4-layer board) this yields an 87.5 °C temperature rise above ambient, which keeps junction within the 105 °C industrial limit up to a 17 °C ambient. For enclosed industrial cabinets above 50 °C internal ambient, add a heat-spreader or active airflow. The die-down TEBGA-1 is the preferred thermal-attach surface - apply thermal pad with 0.5 W/mK tim material.
P1010 requires a multi-rail supply: 0.9 V (Vdd) for core, 1.5 V or 1.35 V for DDR3/DDR3L, 1.8 V for analog/PLL, and 3.3 V for IO. The power-on sequence per the Reference Manual mandates the DDR rail ramp before the core rail, otherwise the DDR IO cells can latch-up. Use a sequencer like the NXP PF3000 or an RC-based discrete scheme. Avoid large inrush by slew-rate limiting each rail to ≤10 mV/us.
The RGMII lines run at 125 MHz DDR and are highly sensitive to skew - keep them under 25 mm length difference, route over continuous ground, and use a source-terminated 50-ohm topology. The PCIe Gen1 lanes similarly benefit from length-matched pairs within ±5 mil. Place the 100 MHz differential reference clock to the SoC within 50 mm and guard it with a guard-ring of ground vias.
コンプライアンス情報
RoHS compliant and lead-free per NXP product page; REACH SVHC declaration confirmed. AEC-Q100 not applicable for this industrial-grade communications SoC. Conflict-mineral reporting maintained per NXP corporate policy.
