P1014NSE5HHA - QorIQ P1014 SoC, 800 MHz e500, 425-TEPBGA | NXP
部品番号: P1014NSE5HHA ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $78.5 | $78.50 |
| 10 | $72.1 | $721.00 |
| 100 | $64.85 | $6,485.00 |
| 500 | $57.4 | $28,700.00 |
| 1,000 | $51.2 | $51,200.00 |
P1014NSE5HHA 概要
A QorIQ communications processor is a category of Power Architecture-based SoCs designed by NXP/Freescale to consolidate networking, security, and I/O functions that previously required separate components. Within the broader taxonomy, the P1014 sits in the entry tier of the QorIQ P1 family, between the lower-frequency P1010 and the higher-end P1020 dual-core parts, and is built on a 45 nm CMOS process for low static and dynamic power.
Key features include 800 MHz core frequency, integrated SEC 4.0 cryptographic accelerator, hardware pattern-matching and queuing engines, dual 10/100/1000 Ethernet MACs with SGMII support, three PCI Express Gen 1 controllers, two SATA Gen 2 interfaces, USB 2.0 host and device, 16-bit DDR3 with ECC up to 800 MT/s, and an operating temperature range of 0°C to 105°C suitable for thermally managed industrial enclosures. The integrated SEC engine offloads IPSec, SSL/TLS, and bulk encryption from the core, while the queue manager and pattern-matching blocks accelerate deep-packet inspection workloads without external TCAMs.
The P1014NSE5HHA is intended for industrial-grade networking equipment where the SoC must combine cryptographic acceleration, multiple high-speed I/Os, and DDR3 memory in a single 425-ball 19x19 mm BGA footprint. Typical applications include small-form-factor industrial routers, secure edge gateways, industrial IoT gateways, networked storage controllers (NAS/SAN), factory automation controllers, and compact wireless backhaul equipment.
When designing with this device, allocate the DDR3 fly-by routing carefully to maintain signal integrity at 800 MT/s, place at least one 100 nF decoupling capacitor per power pin pair adjacent to the BGA, and verify thermal headroom with the manufacturer-provided junction-to-ambient and junction-to-case thermal resistance values for the 425-TEPBGA package. Use NXP's CodeWarrior or QorIQ Linux SDK for software development, and consult the reference design guide for the SERDES reference clocking and PCIe reference clock distribution topology.
ドロップイン代替品: P1014NSE5HHA — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: P1014NSE5HHA （同一形状・フットプリント） — 相違点: Memory Controller, Operating Temperature, Security Engine, Core Architecture, Ethernet MACs.
クイック比較ツール — 並列比較する代替部品を選択:
P1014NXN5DFA
✅ ドロップイン✓ 在庫あり
$22.1 / 個
データシートを見る →P1024NSE5HHA
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
P1010NSE5HHA
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$24.1 / 個
データシートを見る →P1014NSE5HHB
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
P1014NSE5HHA 最大定格＆電気的特性
| Processor Family | QorIQ P1 |
| Core Architecture | Power Architecture e500v2 |
| Number of Cores | 1 |
| Core Frequency | 800 MHz |
| Process Technology | 45 nm CMOS |
| パッケージ / ケース | 425-TEPBGA (19x19 mm, 1.0 mm pitch) |
| 動作温度 | 0 C to +105 C |
| Memory Controller | 16-bit DDR3 with ECC, up to 800 MT/s |
| Ethernet | 2 x 10/100/1000 MAC (SGMII) |
| PCI Express | 3 x PCIe Gen 1 controllers |
| SATA | 2 x SATA Gen 2 |
| USB | 2 x USB 2.0 (host + device/OTG) |
| Security Engine | SEC 4.0 (IPSec, SSL/TLS, bulk crypto) |
| MSLレベル | 3 (168 hours) |
| Packaging | Tray |
| Lead Free Status | Lead Free |
| RoHS ステータス | RoHS Compliant |
P1014NSE5HHA 425-tepbga (19x19 mm, 1.0 mm pitch) ピン配置ガイド
P1014NSE5HHA (425-tepbga (19x19 mm, 1.0 mm pitch) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: P1014NSE5HHA.
詳細は データシート をご参照ください。
主な用途
P1014NSE5HHA の用途: 6 件s: Industrial Router / Secure Edge Gateway, Network Attached Storage (NAS) Controller, Industrial IoT Gateway, Factory Automation Controller, Compact Wireless Backhaul Equipment, Secure Print / Imaging Appliance.
Industrial Router / Secure Edge Gateway
The P1014NSE5HHA's 800 MHz e500v2 core, dual GbE MACs, three PCIe controllers, and integrated SEC 4.0 cryptographic accelerator make it ideal for industrial-grade secure edge gateways. The SEC engine offloads IPSec and TLS tunnels so the e500 core can sustain line-rate forwarding on GbE links, while the 16-bit DDR3 controller with ECC keeps VPN state tables reliable. Operating range 0 to +105 C allows sealed enclosure deployment. Placed on the WAN-side board with a GbE PHY on each SGMII lane and PCIe-attached Wi-Fi 6 modem; the dual GbE removes the need for an external switch IC.
おすすめ
Network Attached Storage (NAS) Controller
The P1014NSE5HHA's two SATA Gen 2 ports and DDR3 with ECC make it well suited for compact NAS controllers where reliability and storage throughput matter. The e500v2 core runs SMB/NFS stacks, while the integrated SEC block accelerates encrypted-volume access. Compared with a discrete CPU + companion chip approach, the P1014 SoC reduces BOM and PCB area significantly. Reference design uses SATA SSD or HDD behind the two SATA ports and a single DDR3-1600 16-bit ECC DIMM for cache; the SoC's PCIe lanes attach a 10 GbE upgrade card when needed.
おすすめ
Industrial IoT Gateway
The P1014NSE5HHA combines USB 2.0 host, PCIe, and GbE in a single SoC for industrial IoT gateways aggregating Modbus/TCP, OPC-UA, and BACnet traffic. The 800 MHz core runs MQTT brokers or containerized edge services while the SEC engine secures TLS 1.2/1.3 links to the cloud. Industrial 0 to +105 C operation matches factory-floor enclosure requirements without active cooling. The design uses USB for cellular modem and PCIe for sub-GHz or LoRa concentrator cards; the dual GbE separates field-bus traffic from north-bound cloud uplinks.
おすすめ
Factory Automation Controller
The P1014NSE5HHA's deterministic single-core e500v2 architecture suits real-time factory automation controllers where deterministic latency matters more than aggregate throughput. Determinism is preserved by the QorIQ interrupt architecture and the DDR3 controller's QoS features, while the SEC engine secures PROFINET or EtherNet/IP traffic. Operating up to +105 C, the device mounts in sealed cabinet locations. Reference topology uses one GbE for PROFINET, the second for management, and PCIe for a deterministic Ethernet PHY add-in card.
おすすめ
Compact Wireless Backhaul Equipment
The P1014NSE5HHA's high I/O integration supports compact wireless backhaul nodes where PCB area and power budget are constrained. The dual GbE MACs aggregate Ethernet traffic, the SEC engine terminates encrypted backhaul links, and the three PCIe lanes attach a wireless modem. The 45 nm CMOS process keeps dynamic power within passive-heatsink envelopes even at 800 MHz. A typical layout places the SoC between the GbE PHYs and the PCIe-modem daughter card; the BGA's 1.0 mm pitch is compatible with standard 4-layer PCB stack-up used in compact radio units.
おすすめ
Secure Print / Imaging Appliance
The P1014NSE5HHA is suitable for secure print and imaging appliances where encrypted document transfer, USB device interfaces, and GbE network connectivity are required. The SEC 4.0 engine handles TLS for pull-printing and IPsec for site-to-site printing, while the USB 2.0 device port enables direct-attached print jobs. Operating up to +105 C suits service-room deployments. The SoC connects to a GbE switch, a USB device port, and a SATA-attached SSD job spooler; the integrated SEC block eliminates the need for a discrete TPM or crypto accelerator.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: P1014NSE5HHA — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | P1014NXN5DFA | P1024NSE5HHA | P1010NSE5HHA | P1014NSE5HHB |
|---|---|---|---|---|---|
| Package | 425-TEPBGA (19x19 mm) | 425-TEPBGA (19x19 mm) - same | 425-TEPBGA (19x19 mm) - same | 425-TEPBGA (19x19 mm) - same | 425-TEPBGA (19x19 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | Power Architecture e500v2 | Power Architecture e500v2 | Power Architecture e500v2 (dual-core) | Power Architecture e500v2 | Power Architecture e500v2 |
| Core Frequency | 800 MHz | 800 MHz | 800 MHz (per core) | 533 MHz | 800 MHz |
| Number of Cores | 1 | 1 | 2 | 1 | 1 |
| Memory Controller | 16-bit DDR3 with ECC, up to 800 MT/s | 16-bit DDR3 with ECC, up to 800 MT/s | 32-bit DDR3 with ECC | 16-bit DDR3 with ECC, lower MT/s | 16-bit DDR3 with ECC, up to 800 MT/s |
| Security Engine | SEC 4.0 | SEC 4.0 | SEC 4.0 | Reduced SEC block | SEC 4.0 |
| Operating Temperature | 0 C to +105 C | 0 C to +105 C | 0 C to +105 C | 0 C to +105 C | 0 C to +105 C |
主な差別化要因
- Highest speed grade in the single-core P1 family with full SEC engine （vs P1010NSE5HHA)
- Single-core deterministic architecture vs multi-core （vs P1024NSE5HHA)
- Same 425-TEPBGA 19x19 mm footprint across P1 variants （vs PowerQUICC III MPC8536)
設計ノート
Estimated: The 425-TEPBGA junction-to-ambient thermal resistance depends heavily on PCB copper area and airflow. For the 800 MHz core dissipating approximately 3 to 4 W typical load, NXP recommends at least 4-layer PCB construction with a continuous ground plane beneath the BGA, plus a small heat-spreader or copper lid for sealed-enclosure designs operating up to +105 C. Always refer to the manufacturer-published thermal model and validate with on-board thermocouples during bring-up.
The DDR3 controller requires fly-by topology with matched trace lengths (per NXP layout guideline), with the VTT termination resistor placed at the far end of the address/command fly-by chain. Route DDR3 on the top layer with a continuous ground reference plane on layer 2, and use 100 ohm differential impedance for the SATA and PCIe SERDES pairs. Place at least one 100 nF decoupling capacitor adjacent to each power pin pair of the BGA, plus bulk capacitors on each voltage rail within 25 mm of the device.
The SGMII GbE and PCIe SERDES require an external reference clock with low jitter (less than 1 ps RMS typical). Series-coupling capacitors on SERDES pairs should be placed symmetrically within the AC-coupling region specified by NXP. The USB 2.0 differential pair requires 90 ohm differential impedance; place the common-mode choke close to the SoC side of the connector. Reference the NXP hardware design guide for the recommended PCB stack-up and SERDES routing rules.
Do not confuse the P1014NSE5HHA industrial variant (0 to +105 C) with extended-temperature variants; the operating range must match the deployment. Avoid using the P1014 in designs that previously targeted the PowerQUICC III MPC8536, since the ball maps and pin assignments are different. Confirm the SEC 4.0 firmware and driver versions are matched to the silicon revision specified by NXP errata documents before enabling secure-boot or IPsec tunnels in production.
コンプライアンス情報
RoHS compliant and lead-free per Rochester Electronics and distributor listings. MSL Level 3 (168 hours) per Rochester. Operating range 0 C to +105 C is industrial-grade; AEC-Q100 automotive qualification is not applicable to the P1 family.
