P1014NSN5HFA - QorIQ P1014 800MHz SoC, DDR3, GbE | NXP
部品番号: P1014NSN5HFA ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $38.5 | $38.50 |
| 10 | $34.2 | $342.00 |
| 100 | $29.85 | $2,985.00 |
| 250 | $27.4 | $6,850.00 |
| 500 | $25.1 | $12,550.00 |
P1014NSN5HFA 概要
What is a QorIQ communications processor? QorIQ is NXP's Power Architecture-based system-on-chip (SoC) platform for networking and industrial embedded applications, sitting in the hierarchy of: SoC -> communications processor -> microprocessor (MPU). It integrates CPU cores with networking peripherals (Ethernet, PCIe, SATA, USB), a memory controller, and security engines on a single die, replacing multi-chip designs with one part. QorIQ P1 series targets low-power, single-core applications where cost and deterministic performance matter more than multi-core throughput.
Key features of the P1014NSN5HFA include a single Power Architecture e500v2 core at 800 MHz, integrated DDR3 memory controller with ECC support, three Gigabit Ethernet interfaces (one with packet parsing acceleration), two PCIe Gen1 controllers, two SATA 2.0 ports, USB 2.0 host/device, and a security engine for IPsec, SSL/TLS, and trusted boot. The device supports an operating temperature range of 0C to 105C, enabling deployment in thermally demanding industrial enclosures without additional cooling.
The P1014 architecture implements a 32-bit superscalar e500v2 core with hardware virtualization and signal-processing extensions. Its on-die packet processing engine accelerates routing and filtering tasks, offloading work from the core and reducing latency for time-sensitive network traffic. The integrated security engine handles AES, 3DES, and SHA acceleration, enabling VPN termination and secure boot without external crypto chips.
Typical applications for the P1014NSN5HFA include industrial Ethernet gateways, factory automation controllers, smart grid substation equipment, entry-level routers and switches, network-attached storage controllers, and embedded control boards in railway and energy systems. Its combination of networking peripherals and a deterministic real-time capable core makes it especially suitable for protocol conversion gateways that bridge Modbus, EtherCAT, or PROFINET with enterprise networks.
When designing with this device, allocate at least 8 PCB layers with dedicated ground and power planes, and follow NXP AN4160 layout guidance for the DDR3 controller. The device supports a wide range of boot sources including NOR flash, NAND flash, SPI, and SD/MMC, simplifying firmware development. JTAG and Aurora debug interfaces are available for boundary-scan and trace-based debugging.
This page synthesizes distributor pricing, drop-in alternatives within the QorIQ P1 family, and practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: P1014NSN5HFA — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: P1014NSN5HFA （同一形状・フットプリント） — 相違点: Memory Controller, Operating Temperature, Core Architecture, SATA, USB.
クイック比較ツール — 並列比較する代替部品を選択:
P1010NSN5HFA
✅ ドロップイン✓ 在庫あり
$20.5 / 個
データシートを見る →P1010NSE5DFA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P1010NSN5DFB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P1020NSN5HFA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P2020NSN5HFA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P1014NSN5HFA 最大定格＆電気的特性
| Series | QorIQ P1 |
| Core | PowerPC e500v2 |
| Core Count | 1 |
| データバス幅 | 32-bit |
| Core Frequency | 800 MHz |
| Memory Controller | DDR3 with ECC |
| Ethernet | 3x Gigabit Ethernet (one with packet parsing) |
| PCIe | 2x PCIe Gen1 controllers |
| SATA | 2x SATA 2.0 |
| USB | USB 2.0 host/device |
| Security Engine | AES, 3DES, SHA, IPsec, SSL/TLS acceleration |
| 動作温度 | 0C to 105C |
| パッケージ | 425-TEPBGA I (19x19 mm) |
| Ball Pitch | 0.8 mm |
| 実装タイプ | Surface Mount (BGA) |
| MSLレベル | 3 (168 Hours) |
| HTSUS Code | 8542.31.0001 |
P1014NSN5HFA 425-tepbga i (19x19 mm) ピン配置ガイド
P1014NSN5HFA (425-tepbga i (19x19 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: P1014NSN5HFA.
詳細は データシート をご参照ください。
主な用途
P1014NSN5HFA の用途: 7 件s: Industrial Ethernet Gateway, Smart Grid Substation Equipment, Entry-Level Router / Network Appliance, Network-Attached Storage Controller, Factory Automation Controller, Railway Onboard Signaling Equipment, Edge IoT Protocol Concentrator.
Industrial Ethernet Gateway
The P1014NSN5HFA's three Gigabit Ethernet interfaces (one with hardware packet parsing) and 800 MHz e500v2 core make it a strong fit for industrial Ethernet gateways bridging fieldbus networks like PROFINET, EtherCAT, and Modbus TCP. The integrated DDR3 controller with ECC delivers deterministic memory access for protocol translation, while the security engine accelerates IPsec tunnels to the enterprise network. Power consumption stays low enough for DIN-rail fanless enclosures rated for the 0C to 105C operating range. Typical deployment alongside an isolated PHY like the NXP TJA1102 reduces BOM and PCB area.
おすすめ
Smart Grid Substation Equipment
Substation controllers require deterministic networking and cryptographic acceleration, both of which the P1014NSN5HFA delivers. The 800 MHz e500v2 core runs IEC 61850 protocol stacks with predictable latency, while the AES/SHA engine accelerates secure authentication per IEEE 1686 and NERC CIP requirements. The 0C-105C operating temperature supports unconditioned outdoor cabinets, and the 425-TEPBGA package withstands industrial shock and vibration profiles when paired with underfill. PCI Gen1 links connect to companion FPGA or ADC cards for power-line sensing.
おすすめ
Entry-Level Router / Network Appliance
For small-business routers, VPN concentrators, and SD-WAN edge nodes, the P1014NSN5HFA provides an integrated platform with three GbE ports, IPsec acceleration, and a DDR3 controller supporting up to 2 GB of RAM. The hardware packet parser offloads header inspection from the core, sustaining line-rate throughput on gigabit WAN links. USB 2.0 and SATA 2.0 ports support external storage or 3G/4G modem modules, while PCIe slots accept Wi-Fi controllers or crypto accelerators. The SoC's low power envelope eliminates active cooling in desktop-form-factor appliances.
おすすめ
Network-Attached Storage Controller
The P1014NSN5HFA's dual SATA 2.0 ports and GbE interfaces target small-form-factor NAS controllers, providing RAID-0/1 capability without external controllers. Its DDR3 controller supports up to 2 GB of ECC memory, sufficient for ZFS-on-Linux metadata caching in SOHO deployments. The USB 2.0 host port enables external backup drives, and the e500v2 core's deterministic performance simplifies real-time file system journaling. Linux and FreeNAS distributions support the P1010/P1014 family out of the box, reducing firmware development time.
おすすめ
Factory Automation Controller
In factory automation, the P1014NSN5HFA serves as the central controller for programmable logic, motion coordination, and machine vision preprocessing. The e500v2 core runs VxWorks or Linux RT with hard real-time scheduling, while PCIe connects to FPGA-based EtherCAT masters or high-speed analog input cards. The integrated security engine authenticates firmware updates per IEC 62443, critical for OT networks. The 425-TEPBGA package with 0.8 mm pitch supports fine-line PCBs for compact DIN-rail modules with the 0C to 105C industrial temperature range.
おすすめ
Railway Onboard Signaling Equipment
Railway onboard control units require EN 50155-compliant thermal performance and EMC robustness, both of which the P1014NSN5HFA supports with its extended temperature range and integrated peripherals. The e500v2 core runs safety-critical signaling stacks while the security engine handles encrypted train-to-ground communication. GbE ports link to event recorders and driver's display units, PCIe connects to redundant signaling modules, and SATA interfaces with black-box data storage. The 425-TEPBGA package withstands railway vibration profiles with proper board staking.
おすすめ
Edge IoT Protocol Concentrator
Edge IoT gateways aggregating MQTT, CoAP, OPC-UA, and legacy serial protocols benefit from the P1014NSN5HFA's mix of networking peripherals and deterministic core. The e500v2 handles protocol fan-out at low power, while the security engine terminates TLS sessions from thousands of field sensors. PCIe slots accept LoRa or cellular modems for backhaul, and SATA enables local data buffering during network outages. The 0C to 105C operating range supports outdoor enclosures in smart agriculture and smart city deployments.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: P1014NSN5HFA — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | P1010NSN5HFA | P1010NSE5DFA | P1010NSN5DFB | P1020NSN5HFA | P2020NSN5HFA |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 425-TEPBGA I (19x19 mm) | 425-TEPBGA I (19x19 mm) - same | 425-TEPBGA I (19x19 mm) - same | 425-TEPBGA I (19x19 mm) - same | 425-TEPBGA I (19x19 mm) - same | 425-TEPBGA I (19x19 mm) - same |
| Core Architecture | PowerPC e500v2, single core | PowerPC e500v2, single core | PowerPC e500v2, single core | PowerPC e500v2, single core | PowerPC e500v2, dual core | PowerPC e500v2, dual core |
| Core Frequency | 800 MHz | 800 MHz | 533 MHz | 667 MHz | 800 MHz | 1.0-1.2 GHz |
| Gigabit Ethernet | 3x (one with packet parsing) | 3x | 3x | 3x | 3x | 3x |
| PCIe Lanes | 2x PCIe Gen1 | 2x PCIe Gen1 | 2x PCIe Gen1 | 2x PCIe Gen1 | 2x PCIe Gen1 | 2x PCIe Gen1 |
| SATA Ports | 2x SATA 2.0 | 2x SATA 2.0 | 2x SATA 2.0 | 2x SATA 2.0 | 2x SATA 2.0 | 2x SATA 2.0 |
| Security Engine | AES/3DES/SHA, IPsec, SSL/TLS | AES/3DES/SHA, IPsec, SSL/TLS | AES/3DES/SHA, IPsec, SSL/TLS | AES/3DES/SHA, IPsec, SSL/TLS | AES/3DES/SHA, IPsec, SSL/TLS | AES/3DES/SHA, IPsec, SSL/TLS |
| Operating Temperature | 0C to 105C | 0C to 105C | 0C to 105C | 0C to 105C | 0C to 105C | 0C to 105C |
| Qty-1 Price (USD, est.) | 38.50 | 32.00 | 28.00 | 30.00 | 55.00 | 85.00 |
主な差別化要因
- Highest single-core frequency in the P1010 family at 800 MHz （vs P1010NSE5DFA)
- Single-core deterministic performance for safety-critical industrial applications （vs P1020NSN5HFA)
- Integrated packet parsing engine on one of three GbE ports （vs P1010NSN5DFB)
設計ノート
Allocate a minimum of 8 PCB layers with dedicated ground and power planes for the P1014NSN5HFA. Follow NXP AN4160 layout guidance for the DDR3 controller: route all DDR3 signals on inner layers with matched-length, 100-ohm differential impedance, and a continuous ground reference plane directly beneath the traces. The 0.8 mm BGA pitch demands laser-drilled microvias and 4-mil trace/space capability; plan stack-up accordingly with your fabricator.
At full load with all three GbE ports, PCIe, and SATA active, the P1014NSN5HFA's e500v2 core can dissipate up to 5 W. While the 425-TEPBGA package handles this for the 0C-105C industrial temperature grade, ensure adequate copper thermal relief under the BGA and consider thermal vias connecting the central ball grid to inner ground planes. Avoid placing the BGA directly above heat-generating components on the opposite side of the PCB.
The P1014NSN5HFA's SerDes interfaces (GbE, PCIe, SATA) require AC-coupling capacitors placed as close as possible to the device pins. Use 100-nF X7R 0402 capacitors with controlled vias, and route the SerDes pairs on inner stripline layers with 90-ohm differential impedance. Reference NXP application note AN4220 for SerDes routing guidelines; mismatched lengths greater than 150 mils can cause eye-pattern degradation.
Do not assume P1010, P1014, P1020, and P2020 share the same boot configuration despite sharing the 425-TEPBGA I package. The RCW (Reset Configuration Word) differs between speed grades and core counts; verify the RCW against the P1010 Family Reference Manual for your specific part number. Incorrect RCW programming is the most common cause of no-boot conditions in QorIQ P1 designs. Also confirm JTAG chain ordering when multiple devices share the debug port.
コンプライアンス情報
REACH status per Rochester Electronics listing as of October 2026. RoHS status not explicitly confirmed in the verified data - flagged as [DATA_NEEDED]. AEC-Q100 not applicable as this is an industrial communications processor, not an automotive-grade MCU.
