P1010NSN5HFA - QorIQ P1 800MHz e500v2 SoC, GbE/PCIe/SATA | NXP
部品番号: P1010NSN5HFA ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $38.5 | $38.50 |
| 10 | $34.2 | $342.00 |
| 100 | $28.95 | $2,895.00 |
| 500 | $24.1 | $12,050.00 |
| 1,000 | $20.5 | $20,500.00 |
P1010NSN5HFA 概要
A QorIQ communications processor is a highly-integrated system-on-chip built on the Power Architecture instruction set, designed to replace older PowerQUICC multi-chip designs in cost- and power-sensitive networking endpoints. Within the NXP portfolio hierarchy, the QorIQ P1 series sits below the higher-performance P2/P3/P4 tiers and above the older PowerQUICC II/III families, targeting embedded networking, industrial control, and entry-level communications infrastructure where single-core performance and low power (as low as 1.1 W typical) are sufficient.
Key features of the P1010NSN5HFA include the e500v2 core with hardware virtualization and signal processing extensions, integrated SATA II controller, USB 2.0 with PHY, dual GbE interfaces, PCIe Gen1/Gen2 controller, DDR3 memory controller with ECC support, hardware-accelerated trusted boot using NXP Security Engine, and four TDM/HDLC ports for legacy telecom connectivity. The integrated peripherals allow designers to build a complete network-attached product without external bridges.
The 45 nm process technology combined with aggressive clock gating allows the P1010 platform to deliver PowerQUICC-class functionality at a fraction of the power budget of earlier generations, enabling fanless industrial designs and PoE-powered endpoints. The integrated security engine provides secure boot and run-time integrity verification for tamper-resistant deployments.
Typical applications include IP cameras and surveillance encoders, industrial robotics and machine vision controllers, factory automation gateways, entry-level network attached storage (NAS) appliances, secure routers, smart-grid substation concentrators, and point-of-sale terminals that require deterministic networking and low-latency serial interfaces.
When designing with the P1010NSN5HFA, careful PCB layout is essential - the 425-ball TEPBGA requires microvia or HDI PCB technology, and the DDR3 memory traces must be length-matched within the controller's tolerance window. Use NXP's BSP and CodeWarrior toolchain; the part is supported in mainstream Linux BSPs (mainline and NXP BSP).
This page synthesizes current distributor stock, drop-in package-compatible alternatives, and practical board-design guidance that go beyond the manufacturer datasheet alone.
ドロップイン代替品: P1010NSN5HFA — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: P1010NSN5HFA （同一形状・フットプリント） — 相違点: Operating Temperature, Package, SATA, USB, Memory Controller.
クイック比較ツール — 並列比較する代替部品を選択:
P1010NSE5HHB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P1014NSN5HFA
✅ ドロップイン✓ 在庫あり
$25.1 / 個
データシートを見る →P1014NXN5DFA
✅ ドロップイン✓ 在庫あり
$22.1 / 個
データシートを見る →P1010NXN5HHB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P1010NSN5HFB
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$47.8 / 個
データシートを見る →P1010NSN5HFA 最大定格＆電気的特性
| Processor Series | QorIQ P1 |
| Core Architecture | Power Architecture e500v2 |
| Number of Cores | 1 |
| Core Frequency | 800 MHz |
| DDR Bus Frequency | 667 MHz |
| Process Technology | 45 nm |
| パッケージ | 425-TEPBGA I (19x19 mm) |
| 動作温度 | 0 °C to +105 °C |
| Typical Power Dissipation | 1.1 W (typ, as low as 1.1 W per NXP product page) |
| Memory Controller | DDR3 with ECC |
| Ethernet Interfaces | 2x Gigabit Ethernet |
| PCI Express | PCIe Gen1/Gen2 |
| SATA | SATA II controller integrated |
| USB | USB 2.0 with PHY |
| Security | Trusted Boot / Security Engine |
| RoHS ステータス | RoHS Compliant |
| Lead-Free Status | Lead Free |
| 実装タイプ | Surface Mount (BGA) |
P1010NSN5HFA ピン構成
| ピン A1 | GND — Ground reference |
| ピン B12 | VDD — Core supply voltage |
| ピン C18 | DDR3_DQ0 — DDR3 data lane 0 |
| ピン G5 | PCIe_TX0_P — PCIe transmit lane 0 positive |
| ピン H7 | SATA0_TX_P — SATA 0 transmit positive |
| ピン K10 | USB1_DP — USB 2.0 data plus |
| ピン L15 | SGMII1_TX_P — GbE SGMII lane 1 transmit positive |
| ピン N3 | GPIO0 — General-purpose I/O 0 |
| ピン R12 | TDM_RXD — TDM receive data |
| ピン T20 | JTAG_TDO — JTAG test data out |
主な用途
P1010NSN5HFA の用途: 6 件s: IP Camera / Surveillance Encoder, Industrial Robotics Controller, Entry-Level Network Attached Storage (NAS), Factory Automation Gateway, Secure Router / VPN Concentrator, Smart-Grid Substation Concentrator.
IP Camera / Surveillance Encoder
The P1010NSN5HFA's 800 MHz e500v2 core, dual integrated Gigabit Ethernet ports, SATA II controller, and hardware-accelerated trusted boot make it ideal as the main SoC in PoE-powered IP cameras. The 1.1 W typical power dissipation enables fanless enclosures, while the integrated security engine provides tamper-resistant boot for surveillance deployments. Unlike multi-chip PowerQUICC designs, the P1010 replaces the host CPU, Ethernet MACs, and SATA controller with a single chip, simplifying BOM and PCB layout for compact camera modules.
おすすめ
Industrial Robotics Controller
In industrial robotics, the P1010NSN5HFA delivers deterministic single-core compute performance with real-time Linux (PREEMPT_RT or Xenomai) for motion control loops. The four TDM/HDLC ports connect to legacy fieldbus peripherals, while PCIe and GbE interface with machine vision cameras and PLC networks. The 0 °C to +105 °C operating range covers most factory floor environments, and the integrated DDR3 controller with ECC provides memory integrity for safety-critical motion sequences.
おすすめ
Entry-Level Network Attached Storage (NAS)
The P1010NSN5HFA's integrated SATA II controller, dual GbE (for link aggregation / failover), and PCIe for additional NICs make it well-suited as the SoC for entry-level NAS appliances with 2-4 drive bays. Hardware RAID offload and the e500v2 core's signal processing extensions accelerate file-system operations, while trusted boot protects stored data at rest. The 800 MHz CPU is sufficient for consumer/small-business throughput targets where multi-core P2/P3 series would be over-spec.
おすすめ
Factory Automation Gateway
Factory automation gateways using the P1010NSN5HFA can aggregate multiple fieldbus protocols (Modbus, Profibus, EtherNet/IP) via the integrated TDM/HDLC ports and GbE interfaces. The hardware virtualization extensions of the e500v2 core allow partitioning of real-time control and IT connectivity on a single SoC, reducing gateway footprint and cost. The 425-TEPBGA I package and industrial temperature rating make the P1010 suitable for control cabinet mounting with extended thermal headroom.
おすすめ
Secure Router / VPN Concentrator
Small-business routers and VPN concentrators benefit from the P1010NSN5HFA's hardware-accelerated trusted boot, GbE interfaces, and PCIe for additional WAN NICs. The e500v2 core provides sufficient compute for IPSec/AES encryption at small-site throughput, while the integrated security engine protects the boot flow and configuration store. The 1.1 W typical power dissipation keeps wall-mount and PoE-powered router designs within thermal limits without active cooling.
おすすめ
Smart-Grid Substation Concentrator
In smart-grid substation concentrators, the P1010NSN5HFA aggregates data from multiple IEC 61850 / DNP3 field devices over GbE and serial ports, with trusted boot ensuring substation network integrity. The industrial 0-105 °C operating range, ECC-protected DDR3, and hardware-assisted encryption make the P1010 suitable for utility-grade installations. The single 800 MHz core is sufficient for substation concentrator workloads where deterministic latency and security matter more than raw throughput.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: P1010NSN5HFA — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | P1010NSE5HHB | P1014NSN5HFA | P1014NXN5DFA | P1010NXN5HHB | P1010NSN5HFB |
|---|---|---|---|---|---|---|
| Package | 425-TEPBGA I (19x19 mm) | 425-TEPBGA I (19x19 mm) - same | 425-TEPBGA I (19x19 mm) - same | 425-TEPBGA I (19x19 mm) - same | 425-TEPBGA I (19x19 mm) - same | 425-TEPBGA I (19x19 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Processor Series | QorIQ P1 | QorIQ P1 | QorIQ P1 | QorIQ P1 | QorIQ P1 | QorIQ P1 |
| Core Architecture | Power Architecture e500v2 | Power Architecture e500v2 | Power Architecture e500v2 | Power Architecture e500v2 | Power Architecture e500v2 | Power Architecture e500v2 |
| Number of Cores | 1 | 1 | 1 | 1 | 1 | 1 |
| RoHS Status | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant |
主な差別化要因
- Single-chip integration replacing multi-chip PowerQUICC designs （vs P1014NXN5DFA)
- Lower power envelope for fanless endpoint designs （vs P1014NSN5HFA)
- Trusted boot with hardware security engine （vs Older PowerQUICC II/III families)
設計ノート
The 425-ball TEPBGA I (19x19 mm) package requires HDI PCB technology with microvias for breakout routing. Per NXP QorIQ P1 layout guidelines, DDR3 traces must be length-matched within the controller's tolerance (typically within 25 mil on the same byte lane) and routed on inner layers with reference planes on both sides to maintain signal integrity at 667 MHz DDR operation.
Although the P1010NSN5HFA typically dissipates 1.1 W, peak workloads (DDR3 bursts, PCIe Gen2 link training, security engine operations) can push junction temperature higher. Use NXP's power estimator to validate thermal design; in sealed enclosures, derate to 90% of Tj max and consider a small copper heat-spreader if the SoC shares a PCB with high-power devices.
Do not confuse the P1010 with the pin-compatible P1014 family - although they share the same 425-TEPBGA I footprint, the P1014 has larger cache and a different peripheral mix, so firmware boots only on the matched part. When sourcing replacements, verify the full NXP ordering code (e.g. P1010NSN5HFA vs P1014NSN5HFA) and validate with NXP's part-number decoder before committing to a BOM change.
コンプライアンス情報
RoHS compliant and lead-free per DigiKey listing. AEC-Q100 not applicable (communications processor, not automotive-grade MCU). Halogen-free status not explicitly stated in available data.
