P1014NXN5FFA - QorIQ P1 800MHz e500v2 MPU, 425-TEPBGA | NXP
部品番号: P1014NXN5FFA ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $65 | $65.00 |
| 10 | $58.5 | $585.00 |
| 100 | $52 | $5,200.00 |
| 500 | $47.5 | $23,750.00 |
| 1,000 | $42.8 | $42,800.00 |
P1014NXN5FFA 概要
A microprocessor (MPU) is an integrated circuit that contains the central processing unit (CPU) of an embedded system. In the hierarchy of computing silicon, an MPU sits between microcontrollers (MCUs with on-chip flash and peripherals) and full application processors (APs used in handsets and tablets). QorIQ communications processors target the industrial-networking and edge-router tier where deterministic packet processing, hardware crypto, and multi-protocol I/O are required without the cost of a high-end multicore SoC.
Key features of the P1014NXN5FFA include a 32-bit Power Architecture core with dual-issue out-of-order execution, integrated SEC 4.4 security engine for IPSec/SSL/TLS acceleration, two 10/100/1000 Mb/s Ethernet MACs with QoS and virtualization support, two USB 2.0 ports (one host, one OTG), two SATA 2.0 ports, three PCIe Gen 2.0 controllers, and a 64-bit DDR3 memory controller up to 800 MT/s. The industrial-grade 'N' temperature rating extends the operating range to -40C to +105C, suiting outdoor and factory-floor deployments.
The architecture combines a coherent core complex with a high-bandwidth interconnect fabric and a peripheral block complex. The e500v2 core includes hardware virtualization (hypervisor-aware), dual 32 KB L1 caches, a 256 KB unified L2 cache with ECC, and a 32-bit DDR controller with ECC for high-reliability operation. Hardware crypto offloads free the core for protocol processing, while the packet-processing engine accelerates classification and queue management.
Typical applications include industrial Ethernet switches, IEC 61850-3 substation networking equipment, smart-grid gateways, factory automation controllers, networked printers, entry-level branch routers, and industrial IoT gateways that need deterministic networking, hardware security, and industrial temperature tolerance in a single chip. The compact 19x19 mm TEPBGA package also enables dense PCB layouts for line-card designs.
When designing with this part, ensure the PCB has a minimum 6-layer stack-up with dedicated ground and power planes to handle the 800 MT/s DDR3 interface. The TEPBGA requires precise via-in-pad or microvia construction; improper escape routing will compromise DDR3 signal integrity. Reference the NXP hardware reference manual for SerDes reference-clock jitter and PCIe Gen 2 transmitter pre-emphasis settings.
This page synthesizes distributor pricing, drop-in alternatives within the QorIQ P1 family, and practical design notes not found in the manufacturer datasheet, giving embedded engineers a fast path from MPN to BOM.
ドロップイン代替品: P1014NXN5FFA — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: P1014NXN5FFA （同一形状・フットプリント） — 相違点: Operating Temperature, RoHS Status, USB, Core Architecture, Ethernet.
クイック比較ツール — 並列比較する代替部品を選択:
P1014NSE5FFA
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$25.1 / 個
データシートを見る →P1010NXN5FFA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P1014NXE5FFB
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
P1014NSN5FFB
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
ATSAMA5D31A-CU
✅ ドロップイン✓ 在庫あり
$5.65 / 個
データシートを見る →P1014NXN5FFA 最大定格＆電気的特性
| Processor Type | PowerPC e500v2 |
| Core Count | 1 |
| データバス幅 | 32-bit |
| Maximum Core Frequency | 800 MHz |
| Process Technology | 45 nm |
| パッケージ | 425-TEPBGA (19x19 mm) |
| Pin/Ball Count | 425 |
| Terminal Pitch | 0.8 mm |
| 動作温度 | -40C to +105C (Industrial) |
| Memory Controller | DDR3, 64-bit, up to 800 MT/s, ECC |
| L2 Cache | 256 KB unified |
| Ethernet | 2x 10/100/1000 Mb/s (SGMII/RGMII) |
| USB | 2x USB 2.0 (1 host, 1 OTG) |
| SATA | 2x SATA 2.0 |
| PCIe | 3x PCIe Gen 2.0 controllers |
| Security Engine | SEC 4.4 (IPSec/SSL/TLS) |
| RoHS ステータス | Compliant |
| Lead Free | Yes |
P1014NXN5FFA ピン構成
| ピン A1 | VSS — Ground reference |
| ピン T22 | VDD_CORE — Core supply voltage (1.0 V typ.) |
| ピン B10 | DDR_DQ0 — DDR3 data lane 0 |
| ピン F15 | PCIe1_TX_P — PCIe Gen 2 lane 1 transmit + |
| ピン L5 | SGMII1_TX_P — GbE SGMII 1 transmit + |
| ピン M12 | SATA0_TX_P — SATA port 0 transmit + |
| ピン P7 | USB1_DP — USB 2.0 port 1 D+ |
| ピン C18 | JTAG_TCK — JTAG test clock |
主な用途
P1014NXN5FFA の用途: 7 件s: Industrial Ethernet Switches, IEC 61850-3 Substation Networking Equipment, Factory Automation Controllers, Networked Printers and MFPs, Entry-Level Branch Routers, Industrial IoT Gateways, Smart Grid Communication Nodes.
Industrial Ethernet Switches
The P1014NXN5FFA is purpose-built for managed industrial Ethernet switches. Its two integrated 10/100/1000 Mb/s MACs (SGMII/RGMII) with QoS and VLAN tagging enable wire-speed switching at the access layer, while the e500v2 core runs Layer 2/3 stacks (uClinux, VxWorks) with full hardware virtualization. The hardware SEC 4.4 engine accelerates MACsec for IEC 62443 secure networks. The 19x19 mm TEPBGA footprint suits compact DIN-rail switch designs, and the -40C to +105C industrial temperature rating covers outdoor cabinet and substation deployments.
おすすめ
IEC 61850-3 Substation Networking Equipment
For substation and smart-grid deployments, the P1014NXN5FFA provides the deterministic processing power required by IEC 61851-3 and IEC 61850 protocols. The 800 MHz e500v2 core combined with the SEC 4.4 engine handles GOOSE message processing, SV (Sampled Values) timestamping, and IEC 62351-3 encryption at line rate. The 64-bit DDR3 controller with ECC protects critical protection-relay data, while the industrial -40C to +105C rating is mandatory for substation cabinets that lack climate control.
おすすめ
Factory Automation Controllers
The P1014NXN5FFA powers factory-floor PLCs and motion controllers that need deterministic networking plus a real-time OS. The PCIe Gen 2 controllers accept EtherCAT master cards, while the dual GbE ports run PROFINET RT or EtherNet/IP with hardware-accelerated QoS. The integrated SEC 4.4 engine secures machine-to-machine traffic, and the 19x19 mm BGA allows compact controller boards that fit standard DIN-rail enclosures. The industrial temperature grade handles ambient heat inside cabinet enclosures.
おすすめ
Networked Printers and MFPs
The P1014NXN5FFA is well-suited for high-end networked printers and multifunction peripherals that need printer-language interpretation plus gigabit networking. The 800 MHz e500v2 core decodes PCL/PostScript/PDF streams efficiently, while the dual GbE MACs handle full-duplex print-server traffic without bottlenecking. The SATA port connects local HDD for job spooling, and USB 2.0 ports handle direct-print jobs from USB sticks. Compact BGA package enables the small mainboard footprint required by thin printer designs.
おすすめ
Entry-Level Branch Routers
The P1014NXN5FFA serves as the main CPU in entry-level branch-office routers and SD-WAN edge devices. Its 800 MHz e500v2 core handles BGP/OSPF routing tables and IPSec VPN tunnels, while the hardware SEC 4.4 engine encrypts site-to-site tunnels at line rate without software CPU overhead. Three PCIe lanes accept cellular 5G modem cards, Wi-Fi 6 cards, or additional Ethernet ports. The DDR3 controller supports up to 4 GB of memory for routing-table storage.
おすすめ
Industrial IoT Gateways
The P1014NXN5FFA is an ideal CPU for industrial IoT gateways that aggregate sensor data and forward it to cloud servers. The dual GbE ports daisy-chain industrial sensors, the PCIe lane accepts LoRaWAN or cellular modems, and the SEC 4.4 engine secures TLS 1.3 handshakes for MQTT/HTTPS uplink. The industrial -40C to +105C rating and ECC-protected DDR3 controller support long-life deployments in factories and outdoor installations. NXP's Linux BSP and security SDK reduce time-to-market for gateway OEMs.
おすすめ
Smart Grid Communication Nodes
For smart-grid distribution automation and AMI (Advanced Metering Infrastructure) concentrators, the P1014NXN5FFA delivers the throughput and crypto needed for DLMS/COSEM metering traffic. The e500v2 core runs metering aggregation stacks, the SEC 4.4 engine accelerates encrypted AMI traffic, and the 64-bit DDR3 interface buffers large meter-reading batches. The industrial temperature grade is mandatory for outdoor meter concentrators installed in cabinet enclosures exposed to direct sunlight and winter conditions.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: P1014NXN5FFA — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | P1014NSE5FFA | P1010NXN5FFA | P1014NXE5FFB | P1014NSN5FFB | ATSAMA5D31A-CU |
|---|---|---|---|---|---|---|
| Package | 425-TEPBGA (19x19 mm) | 425-TEPBGA (19x19 mm) - same | 425-TEPBGA (19x19 mm) - same | 425-TEPBGA (19x19 mm) - same | 425-TEPBGA (19x19 mm) - same | 324-LFBGA - different package |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | Microchip Technology |
| Core | PowerPC e500v2 (1 core) | PowerPC e500v2 (1 core) | PowerPC e500v2 (1 core) | PowerPC e500v2 (1 core) | PowerPC e500v2 (1 core) | ARM Cortex-A5 (1 core) |
| Max Core Frequency | 800 MHz | 800 MHz | 667 MHz | 800 MHz | 800 MHz | 536 MHz |
| SATA Ports | 2 | 2 | 1 | 2 | 2 | 0 |
| PCIe Controllers | 3 (Gen 2.0) | 3 (Gen 2.0) | 2 (Gen 2.0) | 3 (Gen 2.0) | 3 (Gen 2.0) | 0 |
| Security Engine | SEC 4.4 | SEC 4.4 | SEC 4.4 | SEC 4.4 | SEC 4.4 | No hardware crypto (software only) |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +85C |
主な差別化要因
- Hardware SEC 4.4 crypto engine with line-rate IPSec/TLS acceleration （vs ATSAMA5D31A-CU)
- Industrial -40C to +105C operating range （vs ATSAMA5D31A-CU)
- Three PCIe Gen 2 controllers for expansion flexibility （vs P1010NXN5FFA)
- 800 MHz e500v2 core with 256 KB L2 cache （vs P1014NSE5FFA)
設計ノート
The 425-TEPBGA at 0.8 mm pitch requires a minimum 6-layer PCB stack-up with HDI microvia construction. Place ground planes directly under the BGA, and use laser-drilled microvias in-pad to escape the center balls. Use the NXP-provided layout checklist in the P1014 hardware reference manual to verify length-matched DDR3 traces; target a Z0 of 50 ohms +/-10% with 100-ohm differential for PCIe/SGMII/SATA pairs. Estimated: a 4-layer stack will likely fail DDR3-800 compliance testing.
The P1014NXN5FFA dissipates approximately 2.5-3.5 W typical at 800 MHz with all peripherals active, and up to 5 W at Tj max. With a TEPBGA junction-to-ambient theta_JA in the 20-25 C/W range (with proper copper spreader), design the enclosure for 35 C/W maximum case-to-ambient. For sealed outdoor enclosures, use a thermal pad bonded to an aluminum chassis for heat spreading. Estimated: at 3.5 W dissipation and 20 C/W theta_JA, junction-to-ambient rise is 70 C, leaving limited margin above 105C Tj.
Do not attempt to use the P1014NXN5FFA without populating the SEC engine firmware - the boot ROM looks for a valid image in NOR flash or SD/eMMC before allowing network boot. Inadequate SerDes reference-clock jitter (>100 ps RMS) will fail PCIe Gen 2 compliance; use a high-quality crystal or oscillator. Always strap the cfg_rcw_src pins correctly before POR - a wrong RCW configuration can lock the SoC without a visible error.
DDR3 signals require write-leveling and gate-training calibrations. Run the DDR controller at 800 MT/s only after verifying SI on a long trace length sample; many designs drop to 667 MT/s for margin. PCIe transmit de-emphasis and pre-emphasis must be tuned per channel using the SERDES configuration registers; starting values from the reference manual often need optimization. Estimated: keepout distance from DDR3 to high-speed serial pairs should be 4x the dielectric thickness.
コンプライアンス情報
RoHS compliant per NXP product page; lead-free confirmed. AEC-Q100 not applicable (this is an MPU, not an automotive-grade IC). Halogen-free status not confirmed in provided data.
