P1010NXE5KHA557 - QorIQ P1010 1.0GHz e500v2 MPU 425-TEPBGA | NXP
部品番号: P1010NXE5KHA557 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $2.61 | $2.61 |
| 10 | $2.48 | $24.80 |
| 100 | $2.3 | $230.00 |
| 500 | $2.15 | $1,075.00 |
| 1,000 | $2 | $2,000.00 |
P1010NXE5KHA557 概要
A microprocessor (MPU) is a single-chip CPU that integrates a processor core, cache, memory controller, and peripheral interfaces into one package. Microprocessor hierarchy: MPU > microprocessor IC > processor > integrated circuit > semiconductor. QorIQ P-series MPUs specifically target embedded communications and control planes where deterministic performance, hardware-offloaded security, and rich I/O are critical - they differ from microcontrollers (MCUs) by relying on external DRAM and running an operating system such as Linux, rather than executing bare-metal firmware from flash.
Key features of the P1010NXE5KHA include hardware-accelerated SEC (Security Engine) for IPSec, SSL/TLS and 3DES/AES, a DDR3/3L memory controller with ECC, four DMA channels, a 32-bit external data bus, a 16-bit address bus, and industrial-grade temperature endurance. The integrated peripherals reduce BOM and PCB area in cost-sensitive designs by eliminating the need for separate GbE PHYs, SATA controllers, or external crypto accelerators.
The P1010 SoC integrates the e500v2 core with on-chip L1 cache, a system interconnect fabric, and the peripherals above; it is widely used in secure industrial gateways, fanless factory controllers, and ruggedized networking appliances where the e500v2 power/performance balance is a deliberate choice versus ARM Cortex-A9 alternatives. The Trusted Boot block supports secure firmware verification at reset.
Typical applications include industrial Ethernet gateways, secure serial-to-Ethernet device servers, programmable logic controllers (PLCs), substation automation equipment, industrial IoT edge nodes, and small-form-factor networked storage. The GbE, USB, and PCIe integration makes the P1010 well-suited as a headless communications controller attached to a host processor.
When designing with this device, ensure the 425-ball TE-PBGA is placed on a 19x19 mm land pattern with matched-length DDR3 traces for signal integrity; the industrial-grade thermal envelope lets it operate fanlessly in sealed enclosures.
This page synthesizes distributor pricing from LCSC, JLCPCB, DigiKey and Mouser, drop-in alternatives within the QorIQ P1 family, and practical design notes not found in the summary datasheet entries.
ドロップイン代替品: P1010NXE5KHA557 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: P1010NXE5KHA557 （同一形状・フットプリント） — 相違点: Core Architecture, Memory Controller, Mounting Type, Operating Temperature, Package.
クイック比較ツール — 並列比較する代替部品を選択:
P1010NSE5KHA
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$54.25 / 個
データシートを見る →P1014NXE5KHA
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
P1013NXE5KHA
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
P1012NXE5KHA
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
P1010NXE5KHA557 最大定格＆電気的特性
| Core Architecture | PowerPC e500v2 |
| Number of Cores | 1 |
| データバス幅 | 32-bit |
| Address Bus Width | 16-bit |
| 最大クロック周波数 | 1.0 GHz |
| Process Technology | 45 nm |
| Instruction Set | 32-bit Power Architecture |
| DMA Channels | 4 |
| Memory Controller | DDR3 / DDR3L with ECC |
| Integrated Peripherals | USB, SATA, GbE, PCIe, SEC, Trusted Boot |
| パッケージ | 425-TEPBGA (19x19 mm) |
| 動作温度 | -40C to +105C (Industrial) |
| 実装タイプ | Surface Mount (BGA) |
| RoHS ステータス | Compliant |
| Family Series | QorIQ P1 (P1010/P1014/P1013/P1012 family) |
P1010NXE5KHA557 425-tepbga (19x19 mm) ピン配置ガイド
P1010NXE5KHA557 (425-tepbga (19x19 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: P1010NXE5KHA557.
詳細は データシート をご参照ください。
主な用途
P1010NXE5KHA557 の用途: 6 件s: Industrial Ethernet Gateway, Secure IoT Edge Router, Substation Automation Controller, Industrial Printer / Imaging Controller, Network-Attached Storage (NAS) Controller, Building Automation Controller (BACnet/Modbus).
Industrial Ethernet Gateway
The P1010NXE5KHA557 fits industrial Ethernet gateway designs because its single 1.0 GHz e500v2 core runs deterministic protocol-conversion firmware (Modbus TCP, EtherNet/IP, PROFINET) with headroom for edge analytics. The integrated GbE MAC, USB 2.0, and PCIe controller remove the need for external NIC chips, cutting PCB area and BOM. The on-chip SEC engine accelerates IPSec and SSL/TLS for VPN-tunneled field sites, while Trusted Boot verifies gateway firmware at power-up. The -40C to +105C thermal envelope lets the gateway operate fanlessly in sealed DIN-rail cabinets on the factory floor, and DDR3 with ECC corrects single-bit memory errors common in industrial EMI environments.
おすすめ
Secure IoT Edge Router
The P1010NXE5KHA557 targets secure IoT edge routers because its hardware SEC engine accelerates AES-256 and SHA-2 with wire-rate throughput, offloading crypto from the e500v2 core and freeing CPU cycles for MQTT routing, data normalization, and TLS termination. The GbE plus PCIe interface allows WAN and Wi-Fi 6 module attachment for last-mile connectivity to sensors. Trusted Boot anchors the root of trust, validating signed firmware before any network port is enabled, which matters for unattended edge deployments where physical tamper resistance is required. The 45 nm process keeps typical power consumption below 5 W, allowing PoE-powered operation.
おすすめ
Substation Automation Controller
The P1010NXE5KHA557 fits substation automation controllers (IEC 61850) because its industrial -40C to +105C temperature range meets IEC 61850-3 environmental requirements for outdoor cabinets and high-voltage switchyards. Its single-core e500v2 architecture delivers deterministic real-time response for GOOSE message processing within 4 ms latency budgets. Hardware SEC acceleration handles MACsec and role-based authentication required by IEC 62351, while Trusted Boot secures firmware against physical-tamper attack vectors. The DDR3 with ECC prevents bit flips in high-EMI switchyard environments, and the 1.0 GHz clock speed supports IEC 61850-9-2 sampled-value streams in parallel with supervisory traffic.
おすすめ
Industrial Printer / Imaging Controller
The P1010NXE5KHA557 fits industrial printer and imaging controllers thanks to its PCIe interface for attaching high-speed scanner ASICs and its SATA host for local storage of print job buffers. The e500v2 core runs embedded Linux distributions such as Yocto or Wind River Linux with printer firmware stacks, while the DDR3 controller handles large image rasterization buffers. The GbE MAC supports 1 Gbps network connectivity for shared office/industrial printer fleets. Industrial temperature grade ensures continuous operation in non-climate-controlled production environments.
おすすめ
Network-Attached Storage (NAS) Controller
The P1010NXE5KHA557 fits small-form-factor NAS controllers because its integrated SATA host and GbE MAC deliver file-server throughput in a single chip. The e500v2 core runs ZFS or ext4 file systems with hardware-XOR acceleration for RAID5/6 parity computation, offloaded by the SEC engine from the host CPU. DDR3 with ECC protects data integrity against bit errors during long RAID rebuilds, while Trusted Boot validates NAS firmware at boot to defeat rootkit attacks. The 1.0 GHz core supports simultaneous SMB/NFS/iSCSI protocol stacks for multi-protocol access.
おすすめ
Building Automation Controller (BACnet/Modbus)
The P1010NXE5KHA557 suits building automation controllers that aggregate BACnet/IP, Modbus TCP, and KNX traffic in commercial HVAC and lighting systems. Its GbE MAC and USB 2.0 host provide physical connectivity to field buses, while the e500v2 core runs a real-time OS such as VxWorks or INTEGRITY for deterministic I/O scheduling. The industrial -40C to +105C thermal envelope handles unconditioned mechanical rooms, and the hardware SEC engine secures remote-management TLS sessions against credential theft. DDR3 with ECC ensures reliable long-term operation in 24/7 building control loops.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: P1010NXE5KHA557 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | P1010NSE5KHA | P1014NXE5KHA | P1013NXE5KHA | P1012NXE5KHA |
|---|---|---|---|---|---|
| Package | 425-TEPBGA (19x19 mm) | 425-TEPBGA (19x19 mm) - same | 425-TEPBGA (19x19 mm) - same | 425-TEPBGA (19x19 mm) - same | 425-TEPBGA (19x19 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | PowerPC e500v2 | PowerPC e500v2 | PowerPC e500v2 | PowerPC e500v2 | PowerPC e500v2 |
| Maximum Clock Frequency | 1.0 GHz | 800 MHz | 1.0 GHz | 800 MHz | 600 MHz |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| Memory Controller | DDR3 / DDR3L with ECC | DDR3 / DDR3L with ECC | DDR3 / DDR3L with ECC | DDR3 / DDR3L | DDR3 / DDR3L |
| Security Engine | Yes (SEC + Trusted Boot) | Yes | Yes | Yes | Limited/optional |
| Process Technology | 45 nm | 45 nm | 45 nm | 45 nm | 45 nm |
主な差別化要因
- Industrial temperature grade -40C to +105C with Trusted Boot and hardware SEC （vs P1010NSE5KHA)
- Caches aligned with e500v2 architecture for deterministic latency （vs P1014NXE5KHA)
- 10+ years NXP long-term silicon availability for industrial lifecycles （vs Generic ARM Cortex-A9 MPU)
設計ノート
The 425-TEPBGA package at 19x19 mm has a published theta-JA in the high single-digit C/W range for a 4-layer JEDEC test board. Estimated: at 1.0 GHz and a typical application power of 3-5 W, junction-to-ambient temperature rise is roughly 30-50 C above ambient. Designers targeting sealed enclosures with 70C internal air should validate with the manufacturer thermal model, keeping the junction under 105C for industrial-grade reliability. Use thermal vias under the center balls and a copper spreader on the top side for improved dissipation.
Route DDR3 traces as matched-length pairs to the 425-TEPBGA balls, ideally within 25 mil length tolerance per byte lane, with reference-ground vias stitched every 200 mil. Series-stubs must be removed by terminating at the via. Keep GbE traces away from PCIe and SATA switching nodes; use guard ground between analog and digital sections. The exposed balls under the package require a land pattern with 0.8 mm pitch micro-via fan-out to inner signal layers.
Do not assume the P1010NXE5KHA557 is pin-compatible with QorIQ P2 (P2020) parts even though both use TE-PBGA packages - the P2020 uses a different 25x25 mm ball map and would short-circuit the PCB. Always re-spin the PCB land pattern when migrating between QorIQ families. Also, the 557 customer-specific suffix means firmware configuration differs from stock P1010NXE5KHA parts; confirm your BSP supports the 557 device tree before field deployment.
Use a multi-rail power solution: 1.0 V for the e500v2 core, 1.5 V for DDR3, 1.8 V or 3.3 V for I/O. Estimated: at 1.0 GHz core, dynamic power is on the order of 2-3 W; static/leakage adds ~0.5 W. Use NXP VR500 or compatible PMIC with sequencing that respects core-before-I/O power-up. Decoupling: 0.1 uF X7R near each supply ball and 10 uF bulk per power domain.
コンプライアンス情報
RoHS compliant per LCSC distributor listing (C7018230). Industrial-grade temperature rating is -40C to +105C (extended); not AEC-Q100 automotive qualified. Refer to NXP product page for up-to-date REACH and conflict-mineral compliance statements.
