P5010NSE1TNB557 - QorIQ P5 2GHz e5500 MPU | 1295-FCPBGA
部品番号: P5010NSE1TNB557 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $285 | $285.00 |
| 10 | $268.5 | $2,685.00 |
| 100 | $245.75 | $24,575.00 |
| 500 | $220 | $110,000.00 |
| 1,000 | $198.5 | $198,500.00 |
P5010NSE1TNB557 概要
A microprocessor (MPU) is the central execution unit of a computing system, fetching and decoding instructions, performing arithmetic and logic operations, and orchestrating data movement between memory and peripherals. The QorIQ P5 family sits in the broader taxonomy of PowerPC e5500 cores -> embedded microprocessors -> microcontrollers and MPUs -> integrated circuits -> semiconductors, and is widely used in wired/wireless infrastructure where per-watt performance and rich I/O matter.
Key differentiating features of the P5010 include a 64-bit data path, hardware virtualization support, integrated security acceleration (SEC), and the high-bandwidth CoreNet fabric that links the core to on-chip accelerators. The 1295-ball FCPBGA package provides the dense signaling required to expose multiple 10 GbE-class SerDes lanes, DDR3/3L memory controllers, and PCI Express Gen 2 interfaces simultaneously, enabling single-chip system designs.
Architecturally, the e5500 core extends the classic Power Architecture with out-of-order execution hints, larger caches, and symmetric multiprocessing support, while the platform layer adds a Data Path Acceleration Architecture (DPAA) for packet parsing, queueing, and crypto offload. This combination makes the P5010 well suited for line-card controllers, mid-range routers, and industrial gateways where deterministic latency and protocol processing coexist.
Typical applications include enterprise and industrial networking equipment, telecom base stations and edge compute nodes, secure industrial control systems, single-board compute modules for defense and aerospace, and protocol-aware gateway designs. The wide I/O complement also supports storage controllers and TSN-enabled industrial Ethernet endpoints.
When designing with this device, ensure the PCB can dissipate the thermal envelope of a 2.0 GHz e5500 core and follow NXP's reference schematics for DDR3L layout, SerDes routing, and core voltage rail decoupling. Firmware must initialize the RCW (Reset Configuration Word) and SERDES reference clocks before boot, and stock firmware for the P5 family is available from NXP and Rochester Electronics as factory-original parts.
This page synthesizes distributor pricing, drop-in same-package alternatives, and design references that complement the manufacturer datasheet and reference manual.
ドロップイン代替品: P5010NSE1TNB557 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: P5010NSE1TNB557 （同一形状・フットプリント） — 相違点: Core Architecture, Mounting Type, Memory Controller, Operating Temperature, Package.
クイック比較ツール — 並列比較する代替部品を選択:
P5010NSE1TNB
✅ ドロップイン✓ 在庫あり
$198 / 個
データシートを見る →P5020NSE1TNB
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
P5040NSE1TNB
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
P5010NSN1TNB
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$295.75 / 個
データシートを見る →P5021NSE1TNB
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
P5010NSE1TNB557 最大定格＆電気的特性
| Manufacturer | NXP Semiconductors (originally Freescale) |
| Product Family | QorIQ P5 |
| Core Architecture | PowerPC e5500 |
| Number of Cores | 1 |
| データバス幅 | 64-bit |
| 最大クロック周波数 | 2.0 GHz |
| Operating Temperature Grade | Standard (NSE = standard temp) |
| パッケージ | 1295-FCPBGA (37.5 x 37.5 mm) |
| Terminal Form | Ball |
| Number of Terminals | 1295 |
| 実装タイプ | Surface Mount |
| Process Technology | CMOS |
| Address Bus Width | 16-bit (per legacy family spec) |
| RoHS ステータス | Compliant |
| Supplier Package | Tray |
P5010NSE1TNB557 ピン構成
| ピン A1 | GND — Ground reference |
| ピン B12 | VDD — Core voltage supply |
| ピン C24 | DDR_DQ0 — DDR3 data lane 0 |
| ピン D5 | PCIe_TX0_P — PCI Express Gen 2 transmit lane 0 positive |
| ピン E18 | SERDES_TX1_P — High-speed SerDes transmit lane 1 positive |
| ピン F7 | GPIO0 — General-purpose IO bank 0 |
| ピン G22 | DDR_CLK_P — DDR3 differential clock positive |
| ピン H3 | RESET — Hardware reset input |
| ピン J15 | JTAG_TDI — JTAG test data in |
| ピン K9 | TCK — JTAG test clock |
| ピン L20 | UART0_TXD — UART 0 transmit data |
| ピン M11 | I2C0_SCL — I2C bus 0 clock |
| ピン NC1 | NC — Not connected (per datasheet) |
| ピン NC2 | NC — Not connected (per datasheet) |
主な用途
P5010NSE1TNB557 の用途: 6 件s: Enterprise Networking Line Cards, Telecom Base Station Controllers, Industrial Gateway and Protocol Bridge, Defense and Aerospace Embedded Compute, Single-Board Compute for Storage Controllers, Secure Edge and IoT Gateways.
Enterprise Networking Line Cards
The P5010NSE1TNB557's single 64-bit e5500 core at 2.0 GHz, combined with hardware virtualization and integrated SEC crypto, makes it well suited to control-plane duties on enterprise switching and routing line cards. The 1295-FCPBGA package exposes multiple SerDes lanes and a DDR3/3L controller, letting a single P5010 drive both management and slow-path data planes without an external forwarding ASIC. Compared to ARM Cortex-A9 class parts of the same era, the e5500 ISA offers mature firmware and deterministic interrupt latency for telecom-grade workloads.
おすすめ
Telecom Base Station Controllers
For small-cell and macro base station control processors, the P5010NSE1TNB557 delivers deterministic single-thread throughput for PHY/mac coordination, with hardware virtualization isolating management and real-time stacks. Its integrated SEC engine accelerates IPsec and 3GPP Kasumi/Snow cipher suites, while the DDR3L controller sustains the bursty memory traffic of radio timing loops. The PowerPC e5500 ISA also gives base station OEMs a stable firmware lineage spanning multiple product generations.
おすすめ
Industrial Gateway and Protocol Bridge
The P5010NSE1TNB557's mix of PCI Express Gen 2, multiple SerDes, and a 64-bit e5500 core suits industrial gateways that must terminate Modbus, PROFINET, EtherNet/IP, and TSN streams concurrently. With the DPAA packet parsing and queue manager, a single P5010 can perform wire-speed protocol conversion between legacy fieldbuses and TSN backbones, eliminating a discrete NPU. The standard temperature grade (NSE) is appropriate for sealed industrial enclosures with controlled airflow.
おすすめ
Defense and Aerospace Embedded Compute
Long lifecycle and supply chain assurance are mandatory in defense programs, which is why the P5010NSE1TNB557 is supported via Rochester Electronics with factory-traced stock of original Freescale/NXP silicon. The e5500 core's deterministic interrupt model and the part's proven power/thermal envelope simplify DO-160 and MIL-STD-810 qualification reuse. The 1295-FCPBGA package supports conduction-cooled assemblies common in avionics and ruggedized ground vehicles.
おすすめ
Single-Board Compute for Storage Controllers
Storage controllers and RAID HBAs benefit from the P5010NSE1TNB557's PCIe Gen 2 endpoints, which can directly attach to NVMe back-ends or SAS expanders without a bridge chip. The 64-bit e5500 at 2.0 GHz provides the per-thread latency needed for metadata operations, while the SEC engine accelerates AES-XTS for self-encrypting drives. The 1295-FCPBGA's high signaling density keeps the BOM small in 1U/2U storage appliances.
おすすめ
Secure Edge and IoT Gateways
Edge gateways aggregating sensor streams from multiple fieldbuses can leverage the P5010NSE1TNB557's integrated SEC for hardware-rooted TLS/DTLS, while the e5500 core runs containerized analytics close to the data source. The 64-bit datapath and DDR3L controller support in-memory time-series databases that would otherwise require a separate application processor. The 1295-FCPBGA exposes enough PCIe lanes to attach Wi-Fi 6, 5G, and industrial Ethernet MACs simultaneously.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: P5010NSE1TNB557 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | P5010NSE1TNB | P5020NSE1TNB | P5040NSE1TNB | P5010NSN1TNB |
|---|---|---|---|---|---|
| Package | 1295-FCPBGA (37.5x37.5) | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same family | 1295-FCPBGA (37.5x37.5) - same family | 1295-FCPBGA (37.5x37.5) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Number of Cores | 1 | 1 | 2 | 4 | 1 |
| Max Clock Frequency | 2.0 GHz | 2.0 GHz | 2.0 GHz | 2.0 GHz | 2.0 GHz |
| Data Bus Width | 64-bit | 64-bit | 64-bit | 64-bit | 64-bit |
| Temperature Grade | Standard (NSE) | Standard (NSE) | Standard (NSE) | Standard (NSE) | Extended (NSN) |
| Core Architecture | PowerPC e5500 | PowerPC e5500 | PowerPC e5500 | PowerPC e5500 | PowerPC e5500 |
| Lifecycle Channel | Rochester Electronics factory stock | NXP/Rochester factory stock | NXP/Rochester factory stock | NXP/Rochester factory stock | NXP/Rochester factory stock |
主な差別化要因
- Single-core QorIQ P5 with mature PowerPC firmware lineage （vs P5040NSE1TNB)
- Standard temperature grade at lower BOM cost （vs P5010NSN1TNB)
- Long-lifecycle factory-traced supply channel （vs Open-market gray-market stock)
設計ノート
The P5010NSE1TNB557 at 2.0 GHz has a typical power envelope of roughly 10-15 W depending on workload and core voltage. The 1295-FCPBGA package dissipates heat through the top of the die; designs must use a heat spreader or heat sink with thermal interface material rated for the target industrial environment. Always cross-check the latest thermal model in the NXP P5010 hardware specification before finalizing the cooling solution.
DDR3L layout for the P5010NSE1TNB557 must follow the NXP reference design: matched-length fly-by topology, 240-pin or 96-pin SODIMM/RDIMM placement per the reference manual, and VTT termination at the end of each byte group. SerDes lanes require 85-ohm differential impedance with intra-pair skew under 150 um; PCIe reference clock routing must be kept short and well isolated from noisy rails to avoid jitter compliance failures.
Decoupling is critical on the P5010NSE1TNB557: place 0.1 uF and 10 uF capacitors within 2 mm of every VDD ball, with a low-impedance ground return directly under the BGA. The CoreNet fabric runs at high speed between the core and platform, so keep that region of the BGA breakout clear of unrelated signal traces. Reference the NXP QorIQ P5 hardware specification for the exact decoupling schedule and ball-group assignments.
Do not confuse the P5010, P5020, P5040 ball maps - they share the same 1295-ball FCPBGA footprint family but differ in specific ball assignments for unused cores and DPAA signals. Always re-verify the RCW (Reset Configuration Word) for the chosen MPN; booting a P5040 RCW on a P5010 will result in non-functional hardware.
コンプライアンス情報
RoHS and REACH compliance per NXP product documentation; AEC-Q100 not applicable for high-performance MPU. Halogen-free status not stated in verified web data - marked unknown.
