P5010NSN1TNB - QorIQ P5 64-Bit e5500 MPU 2.0GHz | NXP
部品番号: P5010NSN1TNB ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $382.87 | $382.87 |
| 10 | $367.5 | $3,675.00 |
| 50 | $345.1 | $17,255.00 |
| 100 | $320 | $32,000.00 |
| 250 | $295.75 | $73,937.50 |
P5010NSN1TNB 概要
What is an MPU (microprocessor unit)? An MPU is an integrated circuit that contains one or more processor cores along with integrated peripherals and memory controllers, forming a complete system-on-chip (SoC) for embedded compute. QorIQ P5 series parts sit in the NXP networking communications processor hierarchy: MPU -> communications processor -> multicore SoC -> embedded networking platform, bridging general-purpose compute and hardware-accelerated datapath silicon for routers, switches, and wireless base stations.
Key features of the P5010NSN1TNB include 2.0 GHz e5500 core frequency, 64-bit Power Architecture instruction set, dual DDR3/3L memory controllers supporting up to 1866 MT/s, integrated 10 GbE and multiple GbE MACs, hardware pattern matching and encryption accelerators, and a 0 to 105 degrees C extended industrial temperature grade. The 1295-ball FCBGA provides the high-pin-count interconnect needed for wide parallel memory buses and multiple SERDES lanes.
The P5010NSN1TNB uses the e5500 superscalar dual-issue Power Architecture core with out-of-order execution, integrated L1 caches, and a large shared L2 cache. The integrated datapath accelerators and SerDes lanes make it a single-chip solution for Layer 2-4 packet processing in carrier-grade networking equipment.
Typical applications include enterprise and carrier Ethernet routers, wireless base station controllers, network security appliances, industrial control systems with deterministic compute, and high-end networked storage controllers. The integrated 10GbE and PCIe Gen2 provide direct attach to high-speed network and expansion silicon without external bridge chips.
When designing with the P5010NSN1TNB, ensure the FCBGA 1295-ball PCB land pattern is matched exactly - this package is not socketed and uses lead-free reflow. Power sequencing rails must follow the NXP P5010 reference design sequence; consult the hardware design guide for SERDES reference clock and DDR3 fly-by topology.
This page synthesizes distributor pricing, real cross-reference candidates for the QorIQ P5 family, and engineering design context drawn from NXP application notes, supplementing the manufacturer datasheet with practical selection and procurement guidance.
ドロップイン代替品: P5010NSN1TNB — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: P5010NSN1TNB （同一形状・フットプリント） — 相違点: Hardware Acceleration, Operating Temperature, Mounting Type, Core Architecture, Memory Controller.
クイック比較ツール — 並列比較する代替部品を選択:
P5020NSN1TNB
✅ ドロップイン✓ 在庫あり
$215 / 個
データシートを見る →P5040NSN1TNB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P5010NSN1MNB
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
P5020NSN1MNB
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
P5040NSN1MNB
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
P5010NSN7TNB
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
P5020NSN7TNB
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
P5010NSN1TNB 最大定格＆電気的特性
| Core Architecture | Power Architecture e5500 |
| Number of Cores | 1 |
| データバス幅 | 64-bit |
| Maximum Core Frequency | 2.0 GHz |
| Series | QorIQ P5 |
| Memory Controller | DDR3 / DDR3L up to 1866 MT/s |
| Ethernet | 10 Gigabit + Multiple 1 GbE MACs |
| PCI Express | PCIe Gen 2 |
| Serial RapidIO | Yes |
| Hardware Acceleration | Pattern matching, security / encryption offload |
| 動作温度 | 0 C to +105 C |
| パッケージ | 1295-ball FCBGA (37.5 x 37.5 mm) |
| 実装タイプ | Surface Mount (BGA) |
| Encryption | Integrated hardware crypto accelerator |
P5010NSN1TNB 1295-ball fcbga (37.5 x 37.5 mm) ピン配置ガイド
P5010NSN1TNB (1295-ball fcbga (37.5 x 37.5 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: P5010NSN1TNB.
詳細は データシート をご参照ください。
主な用途
P5010NSN1TNB の用途: 6 件s: Enterprise and Carrier Ethernet Routers, Wireless Base Station Controllers, Network Security Appliances, Industrial Control and Automation Gateways, Networked Storage and RAID Controllers, Embedded Telecom Server Appliances.
Enterprise and Carrier Ethernet Routers
The P5010NSN1TNB's integrated 10 Gigabit Ethernet controller plus multiple GbE MACs and pattern-matching accelerators make it well suited to line-rate Layer 2/3 routing in enterprise aggregation and carrier edge platforms. Its 64-bit Power Architecture e5500 core running at 2.0 GHz sustains packet forwarding and ACL lookups, while dedicated hardware offloads free the core from crypto and deep-inspection tasks. Dual DDR3/3L controllers up to 1866 MT/s deliver the memory bandwidth required for large routing tables and traffic buffers. OEMs can scale from the single-core P5010NSN1TNB to the dual-core P5020 or quad-core P5040 in the same FCBGA footprint as port counts grow, simplifying platform reuse across product tiers.
おすすめ
Wireless Base Station Controllers
In LTE and 5G base station controllers, the P5010NSN1TNB provides deterministic compute, hardware encryption, and RapidIO for backhaul connectivity to baseband cards. The integrated security accelerators (SEC) accelerate IPsec and MACsec tunnels used in mobile backhaul, while the e5500 core handles OAM, queuing, and synchronization. The extended 0 to +105 C operating range fits outdoor cabinet thermal envelopes when appropriately derated. Pairing the P5010NSN1TNB with NXP's QorIQ-aware Linux SDK and TimeSync support enables PTP and IEEE 1588 timing needed for cellular timing alignment.
おすすめ
Network Security Appliances
The P5010NSN1TNB's hardware encryption accelerators (SEC engine) sustain IPsec, TLS, and SRTP encryption throughput at multi-Gbps rates, making it a good match for mid-range UTM, next-generation firewall, and VPN gateway appliances. The integrated pattern-matching engine accelerates deep-packet inspection (DPI) and signature matching for intrusion detection without burdening the e5500 core. 10 GbE plus PCIe Gen 2 give appliance designers a clean interconnect to NICs and accelerator cards without external bridges, shrinking BOM and power in 1U rackmount platforms.
おすすめ
Industrial Control and Automation Gateways
Deterministic real-time performance on the e5500 core combined with industrial temperature grading makes the P5010NSN1TNB a fit for industrial control gateways and IEC 61850 substation controllers. Its dual GbE enables redundant ring topologies, PCIe connects motor drives and FPGA accelerator cards, and RapidIO provides deterministic low-latency interconnect. The 0 to +105 C range suits substation and process plant environments; serdes-driven deterministic Ethernet (TSN) support positions the P5010 for future time-sensitive networking upgrades alongside legacy fieldbus connectivity.
おすすめ
Networked Storage and RAID Controllers
The P5010NSN1TNB provides iSCSI, NFS, and SMB offload bandwidth in mid-range SAN/NAS controllers thanks to its 10 GbE uplinks, dual DDR3 memory controllers and PCIe Gen 2 for SAS/SATA HBA expansion. The e5500 core runs filesystem and deduplication logic, while the SEC engine accelerates at-rest encryption for compliance-bound storage. ECC-capable DDR3 interface ensures data integrity for RAID rebuilds, and the FCBGA package integrates cleanly onto storage backplane daughtercards.
おすすめ
Embedded Telecom Server Appliances
Software-defined networking (SDN) and NFV appliances use the P5010NSN1TNB's packet processing and crypto performance to run virtualized vSwitch, vRouter, and vCPE workloads in lightweight telco edge servers. PCIe Gen 2 lanes attach network interface cards, and the integrated 10 GbE MACs eliminate one or two external NICs from the BOM. The QorIQ SDK and Linux ecosystem let developers stand up OVS-DPDK fast-path services directly on the e5500 core with deterministic latency, shortening OEM time-to-market for vCPE deployments at small/medium enterprise branches.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: P5010NSN1TNB — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | P5020NSN1TNB | P5040NSN1TNB | P5010NSN1MNB |
|---|---|---|---|---|
| Package | 1295-ball FCBGA (37.5 x 37.5 mm) | 1295-ball FCBGA (37.5 x 37.5 mm) - same | 1295-ball FCBGA (37.5 x 37.5 mm) - same | 1295-ball FCBGA - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Number of Cores | 1 x e5500 | 2 x e5500 | 4 x e5500 | 1 x e5500 |
| Memory Controller | DDR3/3L up to 1866 MT/s dual-channel | DDR3/3L dual-channel | DDR3/3L dual-channel | DDR3/3L dual-channel |
| Ethernet | 10 GbE + multiple GbE MACs | 10 GbE + multiple GbE MACs | 10 GbE + multiple GbE MACs | 10 GbE + multiple GbE MACs |
| PCI Express | PCIe Gen 2 | PCIe Gen 2 | PCIe Gen 2 | PCIe Gen 2 |
| Operating Temperature | 0 C to +105 C | 0 C to +105 C | 0 C to +105 C | Extended temp variant |
主な差別化要因
- Single-core lowest-cost QorIQ P5 entry point （vs P5020NSN1TNB)
- Same FCBGA footprint across the P5 family （vs P5040NSN1TNB)
- Integrated hardware crypto and pattern matching （vs Generic Cortex-A multicore SoCs)
設計ノート
The 1295-ball FCBGA at 37.5 x 37.5 mm requires an HDI PCB stack-up (typically any-layer microvia) for BGA escape. Allocate at least 8 routing layers for SERDES and DDR3 fly-by topology. Use NXP's P5010 hardware design guide escape recommendations; verbatim signal-routing rules (max trace length, impedance targets) are not quoted here because no document number was supplied in the verified data.
Estimated: at full 2.0 GHz core activity and 1.0 V core voltage, the P5010NSN1TNB dissipates in the order of 10 to 15 W depending on workload. A thermal pad, heat-spreader, or heatsink is required at typical fanless 1U and telco edge SKU chassis ambient ratings. Keep ambient below 85 C to stay inside the 0 to +105 C junction range. Pull official power numbers from the manufacturer datasheet before signing off thermal design.
Follow the NXP P5010 power-up and power-down sequencing exactly - multiple voltage rails (core, DDR3 termination, SERDES, IO) must come up in a defined order to avoid latch-up and in-rush damage. The exact ramp/monotonicity rules are not quoted here because no datasheet document number was supplied; consult the official NXP P5010 datasheet and reference manual for the verified sequence before tape-out.
SERDES reference clock jitter must meet the values specified in the NXP P5010 reference manual; using standard crystal oscillators without considering jitter often degrades 10GbE link margins. DDR3 fly-by topology with termination at the end of the bus is strongly recommended for 1866 MT/s operation; consult NXP QorIQ layout guidelines for verified trace length matching tolerances.
コンプライアンス情報
Compliance specifics for the P5010NSN1TNB were not present in the provided verified data; always confirm RoHS/REACH/lead-free status with the manufacturer datasheet prior to procurement decisions.
