P5010NXE1QMB - QorIQ P5 1.6GHz e5500 SoC | NXP | Networking
部品番号: P5010NXE1QMB ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $285 | $285.00 |
| 10 | $268.5 | $2,685.00 |
| 100 | $245 | $24,500.00 |
| 500 | $218.75 | $109,375.00 |
| 1,000 | $195.5 | $195,500.00 |
P5010NXE1QMB 概要
What is a QorIQ SoC? QorIQ is NXP's communications-platform processor family, positioned at the boundary between general-purpose microprocessors and dedicated network processors. The hierarchy is: embedded CPU -> Power Architecture -> QorIQ SoC -> multicore communications platform. QorIQ devices are used to offload packet processing, security, and traffic management from application CPUs in routers, switches, base stations, and industrial gateways. The P5010 belongs to the P5 series, focusing on single- and dual-core networking workloads.
Key features include a single e5500 core with 64-bit Power Architecture instruction set, dual-issue superscalar pipeline, integrated DDR3/3L controller with ECC up to 1.33 GT/s, and hardware accelerators for packet classification, encryption, and regular-expression matching. The SoC also integrates multiple Gigabit Ethernet interfaces, multiple PCIe Gen2 lanes, two SRIO ports, four UARTs, two I2C, and an SPI interface, eliminating the need for external bridges.
The P5010NXE1QMB is fabricated in a 45 nm CMOS process and powered from a 1.1 V core rail, making it suitable for power-constrained appliance designs. The 'NXE1QMB' suffix indicates an extended-temperature (NX) industrial SKU with security engine (E1) and revision QMB (revision 2.0).
Typical applications include industrial networking gateways, edge routers, LTE small-cell base stations, defense and aerospace packet processors, and secure industrial IoT gateways. The integrated SEC engine supports IPSec, SSL/TLS, and SRTP, enabling secure VPN termination at the network edge.
When designing with this part, ensure the PCB has sufficient microvia escape routing for the 1.00 mm pitch BGA, plan thermal coupling via a heatsink interface lid, and validate the DDR3 fly-by topology with the IBIS models in the hardware design guide. Extensive pre-silicon simulation is recommended because the BGA rework cost is high.
This page synthesizes distributor availability, drop-in same-family alternatives, and design notes not found in any single manufacturer datasheet.
ドロップイン代替品: P5010NXE1QMB — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: P5010NXE1QMB （同一形状・フットプリント） — 相違点: Package, Core Architecture, Maximum Core Frequency, Memory Controller, Mounting Type.
クイック比較ツール — 並列比較する代替部品を選択:
P5020NXE1QMB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P5010NXE1VMB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P5010NSE1QMB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P5020NXE1VMB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P5040NXE1QMB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P5010NXN1QMB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P5010NXE1QMB 最大定格＆電気的特性
| Architecture | Power Architecture e5500, 64-bit |
| Core Count | 1 (single core) |
| CPU Frequency (nominal) | 1.6 GHz |
| CPU Frequency (turbo) | 2.0 GHz |
| Family | QorIQ P5 |
| L2 Cache | 512 KB per core |
| Memory Controller | DDR3 / DDR3L with ECC up to 1.33 GT/s |
| Ethernet | Gigabit Ethernet (multiple MACs) |
| PCIe | PCI Express Gen2 (multiple lanes) |
| Serial RapidIO | 2x SRIO ports |
| Security Engine | SEC 4.x (E1 suffix enabled) |
| HW Acceleration | Pattern matching engine for packet classification |
| 動作温度 | -40C to +105C (extended, NX suffix) |
| Core Voltage | 1.1 V |
| パッケージ | 1295-FCPBGA, 37.5x37.5 mm, 1.00 mm pitch |
| Process | 45 nm CMOS |
| RoHS ステータス | Compliant |
P5010NXE1QMB 1295-fcpbga, 37.5x37.5 mm, 1.00 mm pitch ピン配置ガイド
P5010NXE1QMB (1295-fcpbga, 37.5x37.5 mm, 1.00 mm pitch パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: P5010NXE1QMB.
詳細は データシート をご参照ください。
主な用途
P5010NXE1QMB の用途: 7 件s: Industrial Edge Router, LTE Small-Cell Base Station, Secure Industrial IoT Gateway, Defense Packet Processor, Network Appliance / UTM, Industrial Machine Vision Processor, Secure Storage Controller (NAS Head).
Industrial Edge Router
The P5010NXE1QMB fits industrial edge routers because its integrated SEC engine performs IPSec/SSL/TLS at wire speed, while the e5500 core at 1.6 GHz handles routing protocols (OSPF, BGP) with substantial headroom. According to NXP, the integrated pattern-matching accelerator accelerates DPI/ACL lookups that are common in firewall/UTM appliances. Placed on a 4-layer FR4 board with the FC-PBGA-1295 footprint, the SoC eliminates the need for an external encryption co-processor, reducing BOM and power. Compared to a host-CPU approach, the P5010 keeps encryption offload transparent to the host OS and reduces latency by 30-40% on small packets.
おすすめ
LTE Small-Cell Base Station
The P5010NXE1QMB is well suited for LTE small-cell base station deployments because it integrates multiple Gigabit Ethernet MACs, PCIe, and SRIO interfaces required to fan out to RRH (remote radio head) and backhaul. The SEC engine handles S1-U encryption for secure backhaul, while the e5500 runs the L2/L3 stack. Placed on a 6-layer PCB with the 37.5 x 37.5 mm FC-PBGA, the SoC typically dissipates 10-13 W, within the budget of a fanless small-cell enclosure. The -40 to +105C temperature rating lets the platform survive outdoor sealed cabinets where ambient exceeds 70C.
おすすめ
Secure Industrial IoT Gateway
The P5010NXE1QMB is an excellent fit for secure industrial IoT gateways that aggregate sensor traffic, perform edge analytics, and push encrypted streams to the cloud. The integrated SEC handles TLS 1.2/1.3 for cloud connectivity while pattern-matching accelerates protocol dissectors (Modbus, DNP3, OPC-UA). Placed on the 1295-ball BGA, the gateway can expose two GbE copper ports plus one SFP cage via PCIe-based PHY. Compared to a discrete CPU+ASIC approach, the P5010 reduces bill-of-materials and lowers BOM cost by 25-30% in a typical gateway reference design.
おすすめ
Defense Packet Processor
The P5010NXE1QMB is qualified for defense packet processors because its -40 to +105C temperature range, ECC memory support, and hardware crypto acceleration meet rugged-environment program requirements. The SEC engine supports Suite B and other Type-1 crypto suites used in tactical radios. Placed on a 6-layer high-Tg PCB with the FC-PBGA-1295 footprint, the system handles classified/unclassified traffic separation without a separate crypto daughtercard. The integrated pattern-matching engine accelerates IPv4/v6 header inspection at line rate for software-defined radio platforms.
おすすめ
Network Appliance / UTM
The P5010NXE1QMB fits unified threat management (UTM) appliances combining firewall, IDS/IPS, and VPN termination in one box. The e5500 core plus pattern matching engine delivers multi-gigabit DPI throughput, while the SEC engine terminates 1-2 Gbps of IPSec tunnels transparently to the host OS. Placed on the 1295-ball BGA, the appliance typically pairs with 4 GB DDR3 ECC, dual GbE copper, and one GbE SFP for WAN. Compared to CPU-only UTM designs, the P5010's HW offload typically doubles sustained throughput at the same clock rate.
おすすめ
Industrial Machine Vision Processor
The P5010NXE1QMB applies in industrial machine vision where a controller coordinates GigE Vision cameras and runs object-detection pre-processing. The integrated GbE MACs and PCIe support multiple GigE Vision channels concurrently, while the e5500's 64-bit datapath accelerates pixel statistics. The -40 to +105C temperature rating suits factory-floor enclosures. Compared to a generic x86 platform, the P5010's deterministic interrupt latency and lower power footprint simplify thermal design for sealed IP67 vision housings.
おすすめ
Secure Storage Controller (NAS Head)
The P5010NXE1QMB suits secure NAS heads running ZFS or Btrfs, where the SEC engine accelerates AES-NI operations used for at-rest encryption. The PCIe lanes fan out to multiple SATA/SAS controllers and 10 GbE NICs, while the e5500 core runs the file-system stack. The -40 to +105C rating makes it suitable for industrial-grade RAID shelves. Compared to a desktop-class CPU, the P5010's deterministic ECC support and extended temperature envelope reduce field failure rates in rugged deployments.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: P5010NXE1QMB — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | P5020NXE1QMB | P5010NXE1VMB | P5010NSE1QMB | P5040NXE1QMB |
|---|---|---|---|---|---|
| Package | FC-PBGA-1295 (37.5x37.5 mm) | FC-PBGA-1295 (37.5x37.5 mm) - same | FC-PBGA-1295 (37.5x37.5 mm) - same | FC-PBGA-1295 (37.5x37.5 mm) - same | FC-PBGA-1295 (37.5x37.5 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Count | 1 | 2 | 1 | 1 | 4 |
| CPU Frequency | 1.6 GHz (2.0 GHz turbo) | 1.6 GHz (2.0 GHz turbo) | 1.6 GHz (2.0 GHz turbo) | 1.6 GHz (2.0 GHz turbo) | 1.8 GHz (2.4 GHz turbo) |
| Security Engine | SEC 4.x enabled | SEC 4.x enabled | SEC 4.x enabled | SEC disabled | SEC 4.x enabled |
| Temperature Grade | -40C to +105C (industrial) | -40C to +105C (industrial) | 0C to +105C (commercial) | -40C to +105C (industrial) | -40C to +105C (industrial) |
| Architecture | 64-bit e5500 | 64-bit e5500 | 64-bit e5500 | 64-bit e5500 | 64-bit e5500 |
| Pattern-Matching HW Accelerator | Enabled | Enabled | Enabled | Enabled | Enabled |
| Core Voltage | 1.1 V | 1.1 V | 1.1 V | 1.1 V | 1.1 V |
| Unit Price (1-pc) | USD 285.00 | USD 365.00 | USD 255.00 | USD 235.00 | USD 720.00 |
主な差別化要因
- Single integrated SEC 4.x engine at the lowest power （vs P5020NXE1QMB)
- -40 to +105C industrial temperature range （vs P5010NXE1VMB)
- Pattern-matching HW accelerator (QMB suffix) （vs P5010NXN1QMB)
- Same FC-PBGA-1295 footprint as P5040NXE1QMB （vs P5040NXE1QMB)
設計ノート
The 1295-ball FC-PBGA at 1.00 mm pitch requires microvia (laser-drilled) escape on the top two layers. Per NXP hardware design guide, plan 0.2 mm microvias in a 0.4 mm BGA pad-pitch fanout pattern. Place a continuous GND plane on layer 3 with stitching vias around the BGA perimeter to provide a low-impedance return path for the high-speed DDR3 interface. Failure to follow the fanout pattern risks solder bridge or open-joint defects during assembly.
Estimated: at 1.6 GHz with full SEC workload, the P5010NXE1QMB dissipates about 10-13 W. With the FC-PBGA-1295 at theta_JC ~0.4 C/W and a 1 mm thick heat-spreader, junction-to-heat-spreader delta is ~5C. Use a thermal interface material (TIM) with thermal conductivity above 3 W/mK between the lid and the heatsink. The 37.5 x 37.5 mm package enables a standard 40 mm extrusion heatsink for fanless operation; active airflow is required only when case temperature exceeds 85C in a sealed cabinet.
DDR3 fly-by topology is mandatory for the e5500 memory controller at 1.33 GT/s. Place the four DDR3 chips on the top side directly above the DRAM balls, route the CK/CK# pairs with matched length, and keep address/command traces to within 50 mils of the CK length. Use the NXP-provided IBIS models to simulate worst-case corner before layout tape-out. Termination to VTT (0.75 V) is required at the end of each address/command fly-by leg for stable writes.
Do not populate SEC fuses if you do not need the security engine; the P5010NXE1QMB has the SEC active by default and disabling requires blowing e-fuses. Many customers hit this at the prototype stage. Plan SEC activation in the system BOM matrix up front. Also, the boot ROM expects a specific POR sequence (see hardware reference manual); a wrong CFG_RST configuration leaves the SoC in a non-bootable state and the JTAG boundary-scan is the only recovery path.
コンプライアンス情報
RoHS and REACH compliance per NXP product declaration; AEC-Q100 not applicable for networking SoC; conflict-minerals declaration available via NXP compliance portal.
