PCM1789PW - 24-Bit 192kHz Stereo Audio DAC | Texas Instruments
部品番号: PCM1789PW ✓ 生産中PCM1789PW 概要
A stereo audio DAC is a signal-conversion integrated circuit that accepts digital audio samples and produces analog voltage signals suitable for audio output stages. Within the product hierarchy, PCM1789PW is a delta-sigma audio DAC, a data-converter IC, and a semiconductor for consumer, professional, and industrial audio equipment. Its differential outputs can reduce sensitivity to common-mode noise when paired with a suitable analog output network and amplifier stage.
Principal features include 24-bit resolution, 192 kSPS sampling, 113 dB signal-to-noise ratio, stereo differential outputs, and a 4.5 V to 5.5 V analog and digital supply range. The PCM1789 supports software-mode control through three-wire SPI-compatible or two-wire I2C-compatible serial interfaces, enabling access to digital attenuation, soft mute, de-emphasis, and other device functions. A hardware-control mode also provides two user-programmable functions through control pins.
The converter uses a multi-level delta-sigma architecture to reconstruct analog audio from pulse-code-modulated digital samples. The 24-bit data width supports fine amplitude quantization, while the 192 kSPS ceiling accommodates high-resolution PCM streams and oversampled source material. Differential stereo outputs provide two complementary analog channels for balanced downstream audio paths. Exact filter behavior, clock requirements, and output-stage implementation should be confirmed in the manufacturer datasheet.
Typical applications include high-resolution digital audio players, professional audio interfaces, home-theater equipment, active speakers, and instrumentation requiring stereo conversion. The I2S-compatible digital input suits audio processors, USB interface controllers, and digital transport devices, while I2C or SPI configuration is useful where a host controller needs software setup and attenuation adjustment.
A key implementation consideration is analog-output filtering. Follow the manufacturer reference circuit and preserve the required supply decoupling, clock routing, and output-load arrangement. Because output loading and external filter topology can alter distortion and dynamic range, validate the complete channel rather than relying only on the converter's headline SNR specification.
This page organizes the official device description, interface capabilities, package information, sourcing questions, and engineering constraints into one implementation-oriented reference. It also identifies the limits of drop-in replacement sourcing: no five distinct pin-to-pin alternatives were confirmed, and a packaging-only orderable suffix is not presented as a meaningful engineering alternative.
ドロップイン代替品: PCM1789PW — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストPCM1789PW 最大定格&電気的特性
| Product Type | Stereo audio digital-to-analog converter |
| Converter Resolution | 24 bit |
| Maximum Sampling Rate | 192 kSPS |
| Number of Audio Channels | 2 channels |
| Signal-to-Noise Ratio | 113 dB |
| Output Architecture | Differential stereo outputs |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Digital Audio Interface | I2S |
| Software Control Interface | I2C-compatible and SPI-compatible |
| Software-Controlled Functions | Digital attenuation, soft mute, and de-emphasis |
| Hardware Control | Two user-programmable functions through two control pins |
| Converter Architecture | Enhanced multi-level delta-sigma |
| パッケージ | 24-pin TSSOP |
| 実装タイプ | Surface mount |
PCM1789PW 24-pin tssop ピン配置ガイド
PCM1789PW (24-pin tssop パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: PCM1789PW.
詳細は データシート をご参照ください。
主な用途
PCM1789PW の用途: 6 件s: High-Resolution Digital Audio Player, Professional Stereo Audio Interface, Home-Theater Audio Decoder, Active Speaker USB Audio Interface, Digital Audio Test and Measurement, Instrumentation and Data-Acquisition Audio Channel.
High-Resolution Digital Audio Player
The PCM1789PW fits a high-resolution digital audio player because it converts 24-bit stereo PCM data at rates up to 192 kSPS and provides 113 dB SNR. It can receive I2S audio from a digital transport or USB-audio interface, then drive differential analog reconstruction and output-amplifier stages. The 4.5 V to 5.5 V supply range suits a 5 V-class audio architecture. System performance depends on accurate clocking, low-noise supply routing, and the external reconstruction filter and load design.
Professional Stereo Audio Interface
The PCM1789PW is appropriate for a professional stereo interface requiring 24-bit conversion up to 192 kSPS and a 113 dB SNR figure. I2S-compatible data connects to a digital transport or USB controller, while I2C or SPI control permits software adjustment of attenuation, mute, and de-emphasis. Differential outputs can feed a balanced output stage. Because line-level loading and balancing are critical, engineers should implement the manufacturer output network and verify channel performance on the assembled board.
Home-Theater Audio Decoder
A home-theater decoder can use the PCM1789PW when its digital subsystem produces compatible I2S stereo audio and the design requires 24-bit resolution with sampling up to 192 kSPS. The converter's differential outputs support a symmetrical analog path into the amplifier stage, while software serial control enables attenuation and mute management. Designers should synchronize converter and source clocks, maintain short digital routes, and select output filtering that matches the intended speaker-amplifier input impedance.
Active Speaker USB Audio Interface
PCM1789PW suits an active-speaker interface that accepts digital audio from USB and converts it to analog stereo signals before power amplification. Its 24-bit, 192 kSPS capability supports high-resolution playback, and its I2S interface aligns with common audio pipelines. I2C or SPI can share the same host and adjust digital attenuation or mute. A practical implementation should isolate converter clocks from USB timing, verify supported sample-rate paths, and account for the analog output load.
Digital Audio Test and Measurement
The PCM1789PW can serve as the stereo conversion stage in an audio measurement instrument when the instrument requires 192 kSPS operation and differential analog outputs. Its 24-bit data path and 113 dB SNR permit repeatable conversion of controlled digital test signals, while software attenuation supports level adjustment during calibration procedures. Use a quiet 5 V-class supply, stable clock source, and characterized reconstruction filter so converter performance remains distinguishable from fixture and analyzer limitations.
Instrumentation and Data-Acquisition Audio Channel
PCM1789PW can convert stereo audio streams in specialized instrumentation when a 24-bit, differential-output DAC is preferable to a generic codec. The maximum 192 kSPS rate supports demanding waveform capture or signal-generation workflows, while I2S provides a conventional link to programmable audio logic. The I2C or SPI control path enables repeatable attenuation and mute settings. Engineers should treat the converter as one element of the acquisition chain and validate grounding, clock isolation, filtering, and output loading.
エンジニアリング参考データ: PCM1789PW — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | Texas Instruments |
| Package | 24-pin TSSOP |
| Product Type | Stereo audio DAC |
| Converter Resolution | 24 bit |
| Maximum Sampling Rate | 192 kSPS |
| Signal-to-Noise Ratio | 113 dB |
| Output Architecture | Differential stereo outputs |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Audio Data Interface | I2S |
| Software Control Interface | I2C-compatible or SPI-compatible |
主な差別化要因
- Higher stated maximum sampling rate than the compared TLV320DAC23PWG4 (vs TLV320DAC23PWG4)
- Lower pin count for the 24-pin TSSOP implementation (vs TLV320DAC23PWG4)
- Host-programmable attenuation, mute, and de-emphasis functions (vs PCM1789PW)
設計ノート
Route I2S data, serial-control signals, and clock inputs away from the differential analog outputs and reconstruction-network components. Keep clock traces short and provide a continuous ground reference under the device. The converter's 113 dB SNR specification applies to the device under specified conditions, so PCB return paths, connector transitions, and nearby switching circuitry must be managed to preserve the intended noise performance.
Use the manufacturer's recommended bypass-capacitor arrangement on the 4.5 V to 5.5 V supply rails and place the components close to their associated pins. Confirm capacitor voltage ratings, effective capacitance, and dielectric behavior at the operating frequency. A common implementation error is placing bulk and high-frequency decoupling too far from the converter, allowing supply disturbance from the analog output stage to appear directly as audio noise.
Design the clock and I2S interface for the sample rate in use, including edge-rate and timing margins rather than relying only on nominal clock frequency. Keep the data interface away from the analog outputs, use a solid ground plane, and avoid stubs in clock routing. If the converter is clocked from a remote USB or transport device, verify jitter and clock-generation accuracy because timing degradation can affect the reproduced audio signal.
Do not treat the PCM1789PW as a drop-in replacement for a converter with a different pin count or control architecture. The nearby TLV320DAC23PWG4 comparison uses 28 pins and a 96 kSPS maximum rate, unlike the 24-pin, 192 kSPS PCM1789PW. Similarly, do not change only the orderable suffix when the assembly method, solder profile, or packing requirement differs. Validate the exact ordering code and pinout before schematic release.
コンプライアンス情報
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for the exact PCM1789PW ordering code. Consult the current TI product page and applicable quality documentation before finalizing environmental or automotive requirements.