Texas Instruments

PCM1789PW - 24-Bit 192kHz Stereo Audio DAC | Texas Instruments

MPN: PCM1789PW ✓ Aktif
4.5 V to 5.5 V Vdss 24-pin TSSOP Package
MOQ: 1 |

PCM1789PW Genel Bakış

Texas Instruments PCM1789PW is a 24-bit stereo audio digital-to-analog converter with differential outputs, a maximum sampling rate of 192 kSPS, and a 113 dB SNR rating. It operates from a 4.5 V to 5.5 V supply and is packaged in a 24-pin TSSOP. The device supports I2S audio data in addition to software-controlled I2C and SPI-compatible configuration interfaces.

A stereo audio DAC is a signal-conversion integrated circuit that accepts digital audio samples and produces analog voltage signals suitable for audio output stages. Within the product hierarchy, PCM1789PW is a delta-sigma audio DAC, a data-converter IC, and a semiconductor for consumer, professional, and industrial audio equipment. Its differential outputs can reduce sensitivity to common-mode noise when paired with a suitable analog output network and amplifier stage.

Principal features include 24-bit resolution, 192 kSPS sampling, 113 dB signal-to-noise ratio, stereo differential outputs, and a 4.5 V to 5.5 V analog and digital supply range. The PCM1789 supports software-mode control through three-wire SPI-compatible or two-wire I2C-compatible serial interfaces, enabling access to digital attenuation, soft mute, de-emphasis, and other device functions. A hardware-control mode also provides two user-programmable functions through control pins.

The converter uses a multi-level delta-sigma architecture to reconstruct analog audio from pulse-code-modulated digital samples. The 24-bit data width supports fine amplitude quantization, while the 192 kSPS ceiling accommodates high-resolution PCM streams and oversampled source material. Differential stereo outputs provide two complementary analog channels for balanced downstream audio paths. Exact filter behavior, clock requirements, and output-stage implementation should be confirmed in the manufacturer datasheet.

Typical applications include high-resolution digital audio players, professional audio interfaces, home-theater equipment, active speakers, and instrumentation requiring stereo conversion. The I2S-compatible digital input suits audio processors, USB interface controllers, and digital transport devices, while I2C or SPI configuration is useful where a host controller needs software setup and attenuation adjustment.

A key implementation consideration is analog-output filtering. Follow the manufacturer reference circuit and preserve the required supply decoupling, clock routing, and output-load arrangement. Because output loading and external filter topology can alter distortion and dynamic range, validate the complete channel rather than relying only on the converter's headline SNR specification.

This page organizes the official device description, interface capabilities, package information, sourcing questions, and engineering constraints into one implementation-oriented reference. It also identifies the limits of drop-in replacement sourcing: no five distinct pin-to-pin alternatives were confirmed, and a packaging-only orderable suffix is not presented as a meaningful engineering alternative.

Drop-in alternatifler için PCM1789PW — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu ürüne yer değiştirme seçenekleri mevcut değil.

Alternatifleri Talep Edin

PCM1789PW Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type Stereo audio digital-to-analog converter
Converter Resolution 24 bit
Maximum Sampling Rate 192 kSPS
Number of Audio Channels 2 channels
Signal-to-Noise Ratio 113 dB
Output Architecture Differential stereo outputs
Supply Voltage Range 4.5 V to 5.5 V
Digital Audio Interface I2S
Software Control Interface I2C-compatible and SPI-compatible
Software-Controlled Functions Digital attenuation, soft mute, and de-emphasis
Hardware Control Two user-programmable functions through two control pins
Converter Architecture Enhanced multi-level delta-sigma
Paket 24-pin TSSOP
Montaj Türü Surface mount

PCM1789PW 24-pin tssop Pin Yapısı Kılavuzu

PCM1789PW (24-pin tssop paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

24-pin tssop paket pin çizelgesi için PCM1789PW

Ayrıntılı pin çıkış verisi mevcut değil: PCM1789PW.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

PCM1789PW için uygundur 6 uygulamas: High-Resolution Digital Audio Player, Professional Stereo Audio Interface, Home-Theater Audio Decoder, Active Speaker USB Audio Interface, Digital Audio Test and Measurement, Instrumentation and Data-Acquisition Audio Channel.

🎧

High-Resolution Digital Audio Player

The PCM1789PW fits a high-resolution digital audio player because it converts 24-bit stereo PCM data at rates up to 192 kSPS and provides 113 dB SNR. It can receive I2S audio from a digital transport or USB-audio interface, then drive differential analog reconstruction and output-amplifier stages. The 4.5 V to 5.5 V supply range suits a 5 V-class audio architecture. System performance depends on accurate clocking, low-noise supply routing, and the external reconstruction filter and load design.

🎧

Professional Stereo Audio Interface

The PCM1789PW is appropriate for a professional stereo interface requiring 24-bit conversion up to 192 kSPS and a 113 dB SNR figure. I2S-compatible data connects to a digital transport or USB controller, while I2C or SPI control permits software adjustment of attenuation, mute, and de-emphasis. Differential outputs can feed a balanced output stage. Because line-level loading and balancing are critical, engineers should implement the manufacturer output network and verify channel performance on the assembled board.

📺

Home-Theater Audio Decoder

A home-theater decoder can use the PCM1789PW when its digital subsystem produces compatible I2S stereo audio and the design requires 24-bit resolution with sampling up to 192 kSPS. The converter's differential outputs support a symmetrical analog path into the amplifier stage, while software serial control enables attenuation and mute management. Designers should synchronize converter and source clocks, maintain short digital routes, and select output filtering that matches the intended speaker-amplifier input impedance.

🖥️

Active Speaker USB Audio Interface

PCM1789PW suits an active-speaker interface that accepts digital audio from USB and converts it to analog stereo signals before power amplification. Its 24-bit, 192 kSPS capability supports high-resolution playback, and its I2S interface aligns with common audio pipelines. I2C or SPI can share the same host and adjust digital attenuation or mute. A practical implementation should isolate converter clocks from USB timing, verify supported sample-rate paths, and account for the analog output load.

🔧

Digital Audio Test and Measurement

The PCM1789PW can serve as the stereo conversion stage in an audio measurement instrument when the instrument requires 192 kSPS operation and differential analog outputs. Its 24-bit data path and 113 dB SNR permit repeatable conversion of controlled digital test signals, while software attenuation supports level adjustment during calibration procedures. Use a quiet 5 V-class supply, stable clock source, and characterized reconstruction filter so converter performance remains distinguishable from fixture and analyzer limitations.

🏭

Instrumentation and Data-Acquisition Audio Channel

PCM1789PW can convert stereo audio streams in specialized instrumentation when a 24-bit, differential-output DAC is preferable to a generic codec. The maximum 192 kSPS rate supports demanding waveform capture or signal-generation workflows, while I2S provides a conventional link to programmable audio logic. The I2C or SPI control path enables repeatable attenuation and mute settings. Engineers should treat the converter as one element of the acquisition chain and validate grounding, clock isolation, filtering, and output loading.

What is the PCM1789PW?
The PCM1789PW is a Texas Instruments 24-bit stereo audio digital-to-analog converter with a maximum sampling rate of 192 kSPS, 113 dB SNR, and differential outputs. According to the TI PCM1789 product page, the device is a high-performance converter designed for stereo audio signal conversion. It is supplied in a 24-pin TSSOP and uses a 4.5 V to 5.5 V operating supply.
What are the key specifications of PCM1789PW that engineers should know?
The PCM1789PW combines 24-bit resolution, 192 kSPS maximum sampling, 113 dB SNR, and differential stereo outputs in a 24-pin TSSOP. According to the TI PCM1789 product page, its digital audio input is I2S-compatible, while system configuration can use I2C-compatible or SPI-compatible serial control. The supply range is 4.5 V to 5.5 V, and software control supports attenuation, soft mute, and de-emphasis.
Where can I download the PCM1789PW datasheet PDF?
The official PCM1789PW technical information is available through the Texas Instruments PCM1789 product page at https://www.ti.com/product/PCM1789. The page links to ordering information, device data, and the manufacturer datasheet. The third-party datasheet index associated with this part identifies the document as 41 pages, but use the TI-hosted copy for the authoritative revision and operating details.
Where can I find the PCM1789PW pinout?
Use the pin-description table and package drawing in the Texas Instruments PCM1789 datasheet for the definitive PCM1789PW pinout. The part uses a 24-pin TSSOP, so its numbered land pattern contains 24 positions. The visible product description intentionally does not reproduce individual pin names because their assignments must be checked against the current manufacturer document before PCB routing or replacement qualification.
What interfaces does the PCM1789PW support?
The PCM1789PW accepts I2S-compatible digital audio and provides software control through two-wire I2C-compatible or three-wire SPI-compatible serial interfaces. According to the TI product description, software mode provides access to digital attenuation, soft mute, and de-emphasis. The converter also supports hardware-control mode, where two control pins provide two user-programmable functions, allowing a design to use either host-controlled configuration or direct hardware commands.
Is PCM1789PW suitable for high-resolution audio?
The PCM1789PW is suitable for high-resolution stereo audio because it accepts 24-bit data and supports sampling rates up to 192 kSPS. Its manufacturer-listed SNR is 113 dB, providing a concrete dynamic-range figure for converter selection. Actual audible or measured performance also depends on the clock, digital filtering, analog reconstruction filter, load, supply quality, and the output amplifier selected for the complete signal chain.
What supply voltage does PCM1789PW require?
The PCM1789PW requires a 4.5 V to 5.5 V operating supply. The TI PCM1789 product information identifies the converter as a 5 V-class stereo audio DAC. Place the required bypass capacitors close to the supply pins and use a low-impedance layout so switching noise or supply ripple does not degrade the 113 dB SNR capability under real operating conditions.
Can PCM1789PW be used in a professional audio interface?
Yes, the PCM1789PW can be used in a professional stereo audio interface when its 24-bit, 192 kSPS conversion capability and interface functions meet the design requirements. Its I2S input connects to a digital audio transport or USB audio interface, while I2C or SPI control supports attenuation and mute configuration. Differential outputs can feed a balanced analog stage, but output loading and filtering must follow the manufacturer guidance.
PCM1789PW vs PCM1789PWR - which one should I choose?
PCM1789PW and PCM1789PWR use the same 24-pin TSSOP device configuration, but the final letter denotes a different orderable packaging form rather than a different electrical converter. According to the published comparison information, both provide two outputs, 24-bit resolution, and 192 kSPS operation. Choose the suffix that matches the required assembly and packing method; neither suffix changes the core converter function.
When should I choose PCM1789PW over a different stereo DAC?
Choose PCM1789PW when the design requires a 24-bit stereo DAC, operation up to 192 kSPS, a 113 dB SNR rating, I2S audio data, and differential outputs in a 24-pin TSSOP. It is especially suitable when host-controlled attenuation, mute, or de-emphasis is useful through I2C or SPI. Choose another device when it offers a required feature absent here, such as a different package, integrated headphone amplifier, or system-specific digital filter.
Is PCM1789PW suitable for digital audio players and home theater systems?
The PCM1789PW is suitable for digital audio player and home-theater conversion stages that need 24-bit stereo operation up to 192 kSPS. Its I2S input accepts digital audio from a transport or processor, while differential outputs can feed the selected analog reconstruction and amplification stages. The converter's 113 dB SNR supports high-quality audio designs, although system performance remains dependent on clocking and analog implementation.
What is the best drop-in replacement for PCM1789PW?
No confirmed five-part drop-in replacement set was identified for the PCM1789PW, so the only defensible answer is to use the same Texas Instruments PCM1789 family with a different orderable packaging suffix when assembly requirements permit. PCM1789PWR is listed as the closest confirmed alternative, but it is a packaging variant rather than a distinct functional upgrade. Verify pinout, clocks, controls, output topology, and analog characteristics before approving any substitution.
Can TLV320DAC23PWG4 replace PCM1789PW?
The TLV320DAC23PWG4 is not a confirmed drop-in replacement for the PCM1789PW because it uses a 28-pin TSSOP rather than the PCM1789PW's 24-pin TSSOP. Published comparison information also identifies different sampling-rate limits: 96 kSPS for the TLV320DAC23PWG4 and 192 kSPS for the PCM1789PW. A footprint change is required, so this is not a pin-to-pin substitute.
Where can I buy PCM1789PW online?
Use the Request a Quote form on this page to ask for PCM1789PW availability, current lead time, and an order quote. The listing identifies the exact 24-pin TSSOP device, but its distributor snippet does not expose a complete quantity-break price table for this MPN. An engineering buyer should also confirm manufacturer ordering status, packing method, and the required quantity before releasing the procurement request.
What is the price of PCM1789PW?
The current price is obtained through the Request a Quote form on this page rather than through a static price table. The available PCM1789PW listing information does not print qualifying quantity-break prices for the exact MPN, so no unsupported figure should be used in a BOM or budget. Submit the required quantity, packaging preference, and target date with the quote request for current purchasing data.
What is the lead time and stock status for PCM1789PW?
Request the current lead time and stock allocation through the Request a Quote form on this page. The available product listing states that the part is available for ordering, but it does not provide a numeric manufacturer lead time or a quantity-specific stock commitment. For production planning, request confirmation against the selected package suffix and the exact purchase quantity rather than relying on a generic listing message.
How should PCM1789PW be used with a DAC output filter?
Use PCM1789PW differential outputs with the analog reconstruction network and amplifier arrangement specified in the manufacturer reference circuit. The converter provides differential stereo outputs, but the external filter, load, and grounding topology determine channel balance, distortion, and attenuation behavior. Preserve symmetry between the two output paths and test the assembled channel because the 113 dB SNR specification does not describe every system-level impairment.

Mühendislik referans verileri: PCM1789PW — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose PCM1789PW for a stereo conversion design that requires 24-bit data, operation up to 192 kSPS, a manufacturer-listed 113 dB SNR, differential outputs, and a 24-pin TSSOP footprint. Its I2S input and I2C or SPI control make it a strong fit for digital transports, USB audio paths, active speakers, and professional equipment where software attenuation or mute is useful. PCM1789PWR is the closest confirmed ordering alternative when its packing method satisfies the assembly requirement; it is not a different converter architecture. Do not substitute TLV320DAC23PWG4 as a drop-in part because it has 28 pins and a lower 96 kSPS maximum rate, requiring PCB changes. For designs needing integrated headphone amplification, a different package, or other system-specific functions, select a converter that explicitly includes those features rather than assuming family-level compatibility.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün
Brand Texas Instruments
Package 24-pin TSSOP
Product Type Stereo audio DAC
Converter Resolution 24 bit
Maximum Sampling Rate 192 kSPS
Signal-to-Noise Ratio 113 dB
Output Architecture Differential stereo outputs
Supply Voltage Range 4.5 V to 5.5 V
Audio Data Interface I2S
Software Control Interface I2C-compatible or SPI-compatible

Ana Farklılayıcılar

  • Higher stated maximum sampling rate than the compared TLV320DAC23PWG4 (karşılaştırma:TLV320DAC23PWG4)
  • Lower pin count for the 24-pin TSSOP implementation (karşılaştırma:TLV320DAC23PWG4)
  • Host-programmable attenuation, mute, and de-emphasis functions (karşılaştırma:PCM1789PW)

Tasarım Notları

Route I2S data, serial-control signals, and clock inputs away from the differential analog outputs and reconstruction-network components. Keep clock traces short and provide a continuous ground reference under the device. The converter's 113 dB SNR specification applies to the device under specified conditions, so PCB return paths, connector transitions, and nearby switching circuitry must be managed to preserve the intended noise performance.

Use the manufacturer's recommended bypass-capacitor arrangement on the 4.5 V to 5.5 V supply rails and place the components close to their associated pins. Confirm capacitor voltage ratings, effective capacitance, and dielectric behavior at the operating frequency. A common implementation error is placing bulk and high-frequency decoupling too far from the converter, allowing supply disturbance from the analog output stage to appear directly as audio noise.

Design the clock and I2S interface for the sample rate in use, including edge-rate and timing margins rather than relying only on nominal clock frequency. Keep the data interface away from the analog outputs, use a solid ground plane, and avoid stubs in clock routing. If the converter is clocked from a remote USB or transport device, verify jitter and clock-generation accuracy because timing degradation can affect the reproduced audio signal.

Do not treat the PCM1789PW as a drop-in replacement for a converter with a different pin count or control architecture. The nearby TLV320DAC23PWG4 comparison uses 28 pins and a 96 kSPS maximum rate, unlike the 24-pin, 192 kSPS PCM1789PW. Similarly, do not change only the orderable suffix when the assembly method, solder profile, or packing requirement differs. Validate the exact ordering code and pinout before schematic release.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for the exact PCM1789PW ordering code. Consult the current TI product page and applicable quality documentation before finalizing environmental or automotive requirements.

Veri doğrulanma tarihi: 2026-11-10 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

PCM1789PW datasheet PCM1789PW datasheet pdf PCM1789PW pinout PCM1789PW specifications PCM1789PW 24-bit 192kHz PCM1789PW TSSOP-24 PCM1789PW I2S DAC PCM1789PW differential outputs PCM1789PW drop-in replacement PCM1789PW vs PCM1789PWR PCM1789PW price Texas Instruments PCM1789PW

İlgili Bileşenler ve Terimler

Texas Instruments PCM1789 PCM1789PW PCM1789PWR TLV320DAC23PWG4 stereo audio DAC digital-to-analog converter data-converter IC delta-sigma converter audio DAC I2S I2C SPI-compatible interface differential output 24-bit resolution 192 kSPS sampling 113 dB SNR digital attenuation soft mute de-emphasis 24-pin TSSOP TSSOP package family surface-mount package professional audio interface digital audio player
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle