PEX8609-BA50BI - 8-Lane 8-Port PCIe 2.0 Switch | Broadcom
部品番号: PEX8609-BA50BI ✓ 生産中PEX8609-BA50BI 概要
A PCI Express switch is a semiconductor that manages point-to-point serial links between a host or root complex and one or more peripherals. Unlike a conventional parallel bus switch, a PCIe switch operates with serialized differential lanes and transaction-based packet transfer. The PEX8609 combines eight lanes and eight ports in one integrated device, allowing compatible endpoints to share a higher-level interconnect while each link retains protocol-managed flow control and configuration through PCIe.
The principal identified features are PCIe 2.0 operation, support for eight lanes, eight ports, a 4.0 GB/s maximum data rate, and DMA functionality. These characteristics place the PEX8609 in the PCI Express interface IC category. Its 196-PBGA package is intended for dense system-level implementations where the number of routing connections and the need for high-speed differential signaling make a fine-pitch BGA assembly practical.
PEX8609-BA50BI is associated with the Broadcom PEX 8609 product family and a flexible eight-lane, eight-port PCI Express architecture. The product overview describes the PEX 8609 as a PCIe switch with advanced capabilities. DMA support can reduce the involvement of the host processor in data movement when the surrounding system is designed around the device's transfer capabilities, although actual throughput depends on lane width, payload size, reference clocking, and peer-device behavior.
Typical system roles include embedded computing platforms, storage systems, industrial controllers, test equipment, and networked edge systems that need several PCIe endpoints behind one host interface. The device is also relevant to add-in cards and embedded modules using a dense BGA footprint. These uses benefit from consolidating multiple downstream links into one switch rather than requiring separate root ports for every peripheral.
Board design requires careful high-speed signal-integrity control, uninterrupted reference-clock distribution, solid power and ground planes, and BGA-package assembly capability. The 196-pin land pattern must be implemented exactly from the manufacturer's package drawing, including ball assignments, solder-mask details, and via geometry. Validate signal losses, connector and trace discontinuities, inter-pair skew, and power-plane return paths before production release.
This product summary combines the documented PCIe architecture and package characteristics with practical design guidance for evaluating the PEX8609 in multi-endpoint systems. The page also distinguishes the exact catalog identifier from related spellings, clarifies where to obtain technical documents, and records practical sourcing and replacement questions that should be resolved before schematic and PCB sign-off.
ドロップイン代替品: PEX8609-BA50BI — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
PEX8609-BA50BIG
✅ ドロップイン📋 参考代替品(カタログ未掲載)
PEX8609-BA50BI 最大定格&電気的特性
| Product Type | PCI Express switch IC |
| PCI Express Generation | PCIe 2.0 |
| Lane Count | 8 lanes |
| Port Count | 8 ports |
| Maximum Data Rate | 4.0 GB/s |
| Power | 1.60 W |
| DMA Support | Yes |
| パッケージ | 196-PBGA (15 x 15 mm) |
| ピン数 | 196 pins |
| Manufacturer | Broadcom |
| Device Family | PEX 8609 |
PEX8609-BA50BI 196-pbga (15 x 15 mm) ピン配置ガイド
PEX8609-BA50BI (196-pbga (15 x 15 mm) パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: PEX8609-BA50BI.
詳細は データシート をご参照ください。
主な用途
PEX8609-BA50BI の用途: 6 件s: Embedded Compute Expansion, PCIe Storage Controller Platform, Industrial PCIe Control System, Test and Measurement Instrument, Networked Edge Gateway, PCIe Add-In Card.
Embedded Compute Expansion
PEX8609-BA50BI fits an embedded platform that needs to connect several PCIe endpoints behind a single host-side interface. Its eight-lane, eight-port architecture and PCIe 2.0 operation provide a managed switching fabric instead of requiring a separate root port for every peripheral. The 196-pin PBGA package is appropriate for dense boards with advanced assembly capability. Before layout release, confirm endpoint link-width requirements, supported topology, reference-clock distribution, reset sequencing, and the allocation of upstream and downstream ports in the Broadcom PEX8609 documentation.
PCIe Storage Controller Platform
PEX8609-BA50BI can be evaluated for storage appliances in which multiple PCIe endpoint functions need coordinated access through one upstream link. The eight-port structure and stated 4.0 GB/s maximum rate provide the basis for a multi-endpoint fabric, while DMA capability may reduce host-processor involvement in suitable data-transfer paths. Actual storage performance still depends on endpoint behavior, payload size, congestion, lane allocation, and software. Use the manufacturer configuration and electrical documentation to establish supported port modes and validate the board-level link budget.
Industrial PCIe Control System
PEX8609-BA50BI is suitable for an industrial controller that must connect acquisition, communication, or motion-related PCIe modules without allocating a root port to each function. Its eight lanes and eight ports support a scalable endpoint arrangement, and the listed 1.60 W power is a key input to system thermal planning. Industrial implementations should also evaluate operating-temperature limits, long-term availability, isolation requirements, and environmental robustness. Exact qualification, temperature limits, and industrial certification must be confirmed from Broadcom documentation before release.
Test and Measurement Instrument
PEX8609-BA50BI can serve as the central PCIe switch in a modular test instrument that connects several high-speed measurement, signal-processing, or acquisition endpoints. The eight-port topology offers a way to consolidate endpoint access while retaining per-link PCIe transaction handling. Design around the specified 4.0 GB/s maximum rate rather than assuming that aggregate host traffic equals that value. Instrumentation designers should account for BGA assembly, low-noise clock distribution, controlled-impedance routing, synchronization across instruments, and diagnostic visibility during fault isolation.
Networked Edge Gateway
PEX8609-BA50BI fits an edge gateway that needs PCIe-connected compute, storage, or acceleration hardware in a compact enclosure. Eight lanes and eight ports allow designers to define a more flexible internal interconnect than a fixed one-to-one host arrangement. The 196-pin PBGA footprint can help preserve board density, although it raises assembly and inspection requirements. Gateways operating in harsh environments require confirmation of the device's temperature range and long-term supply status. Thermal analysis should include adjacent processors, high-speed retimers, and memory because the switch's listed power contributes to enclosure heat load.
PCIe Add-In Card
PEX8609-BA50BI is suitable for a PCIe add-in card that turns one card-edge interface into multiple downstream PCIe connections for external or onboard peripherals. The eight-lane, eight-port configuration can simplify cabling in modular systems when compared with numerous independently cabled adapters. The implementation must comply with the card's connector allocation, lane routing, reference-clock distribution, auxiliary-power limits, and enclosure airflow. Confirm the 196-PBGA footprint and assembly process early because this fine-pitch package may require board-design rules that exceed a simple two-layer add-in-card process.
エンジニアリング参考データ: PEX8609-BA50BI — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PEX8609-BA50BIG |
|---|---|---|
| Brand | Broadcom | Broadcom |
| Package | 196-PBGA (15 x 15 mm) | 196-PBGA (15 x 15 mm) |
| PCI Express Generation | PCIe 2.0 | PCIe 2.0 |
| Lane Count | 8 lanes | 8 lanes |
| Port Count | 8 ports | 8 ports |
| Maximum Data Rate | 4.0 GB/s | 4.0 GB/s |
| Power | 1.60 W | 1.60 W |
| DMA Support | Yes | Yes |
主な差別化要因
- Exact Broadcom catalog equivalence (vs PEX8609-BA50BIG)
- Dense multi-endpoint PCIe switching (vs PEX8609-BA50BIG)
- Integrated data-movement capability (vs PEX8609-BA50BIG)
設計ノート
Implement the PEX8609-BA50BI 196-PBGA footprint directly from the Broadcom package drawing and preserve the specified ball map. Route all high-speed differential pairs as controlled-impedance nets over continuous reference planes, minimize pair skew, and avoid plane splits beneath the switching region. Include the manufacturer's required via and escape-routing geometry before committing the board stack-up; do not derive ball assignments from a generic 196-ball library.
Validate the complete PCIe link path with the Broadcom PEX8609 reference clock, transmit and receive equalization settings, connector or package escape geometry, and the intended endpoint. Simulation should include insertion loss, return loss, crosstalk, skew, and reference-clock jitter over the intended frequency range. Four GB/s is the identified maximum device data rate, but practical link performance also depends on the complete channel and endpoint capability.
Estimated: using the listed 1.60 W device power, a 196-PBGA assembly may still require attention to adjacent heat sources and copper spreading. The actual junction temperature depends on the package thermal resistance, board construction, airflow, and surrounding components, so calculate it with manufacturer thermal data for the selected land pattern. Provide uninterrupted ground planes and suitable via arrays, and verify the assembled board at the highest expected ambient temperature.
Avoid ordering or schematic labeling solely from catalog abbreviations. PEX8609-BA50BI, PEX8609-BA50BI-G, and PEX8609-BA50BIG appear in different channel records, but the procurement drawing and manufacturer marking should determine the approved part. Also avoid assuming that any PCIe switch with eight ports is interchangeable: verify ball assignment, power rails, clock input, reset polarity, lane direction, reference-clock requirements, register compatibility, and firmware before substitution.
コンプライアンス情報
No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was identified for this orderable MPN. AEC-Q100 is not applicable because the part is not identified as an automotive-qualified device.