Broadcom

PEX8609-BA50BI - 8-Lane 8-Port PCIe 2.0 Switch | Broadcom

MPN: PEX8609-BA50BI ✓ Active
196-PBGA (15 x 15 mm) Package
MOQ: 1 |

PEX8609-BA50BI Overview

Broadcom PEX8609-BA50BI is an eight-lane, eight-port PCI Express switch IC supporting PCIe 2.0, with a maximum data rate of 4.0 GB/s and a listed power value of 1.60 W. The device is identified in a 196-pin PBGA package measuring 15 x 15 mm and is categorized as a PCI Express switch with DMA capability. Its position within the PCI Express interface hierarchy makes it suitable for systems that require one upstream PCI Express link to be expanded across multiple downstream endpoints.

A PCI Express switch is a semiconductor that manages point-to-point serial links between a host or root complex and one or more peripherals. Unlike a conventional parallel bus switch, a PCIe switch operates with serialized differential lanes and transaction-based packet transfer. The PEX8609 combines eight lanes and eight ports in one integrated device, allowing compatible endpoints to share a higher-level interconnect while each link retains protocol-managed flow control and configuration through PCIe.

The principal identified features are PCIe 2.0 operation, support for eight lanes, eight ports, a 4.0 GB/s maximum data rate, and DMA functionality. These characteristics place the PEX8609 in the PCI Express interface IC category. Its 196-PBGA package is intended for dense system-level implementations where the number of routing connections and the need for high-speed differential signaling make a fine-pitch BGA assembly practical.

PEX8609-BA50BI is associated with the Broadcom PEX 8609 product family and a flexible eight-lane, eight-port PCI Express architecture. The product overview describes the PEX 8609 as a PCIe switch with advanced capabilities. DMA support can reduce the involvement of the host processor in data movement when the surrounding system is designed around the device's transfer capabilities, although actual throughput depends on lane width, payload size, reference clocking, and peer-device behavior.

Typical system roles include embedded computing platforms, storage systems, industrial controllers, test equipment, and networked edge systems that need several PCIe endpoints behind one host interface. The device is also relevant to add-in cards and embedded modules using a dense BGA footprint. These uses benefit from consolidating multiple downstream links into one switch rather than requiring separate root ports for every peripheral.

Board design requires careful high-speed signal-integrity control, uninterrupted reference-clock distribution, solid power and ground planes, and BGA-package assembly capability. The 196-pin land pattern must be implemented exactly from the manufacturer's package drawing, including ball assignments, solder-mask details, and via geometry. Validate signal losses, connector and trace discontinuities, inter-pair skew, and power-plane return paths before production release.

This product summary combines the documented PCIe architecture and package characteristics with practical design guidance for evaluating the PEX8609 in multi-endpoint systems. The page also distinguishes the exact catalog identifier from related spellings, clarifies where to obtain technical documents, and records practical sourcing and replacement questions that should be resolved before schematic and PCB sign-off.

Drop-in alternatives for PEX8609-BA50BI — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

PEX8609-BA50BIG

✅ Drop-In
📦 196-PBGA (15 x 15 mm)
0 functional, electrical, lane-count, port-count, or package differences identified; only the catalog notation adds a trailing G

📋 Reference alternative (not in catalog)

PEX8609-BA50BI Maximum Ratings & Electrical Characteristics

Product Type PCI Express switch IC
PCI Express Generation PCIe 2.0
Lane Count 8 lanes
Port Count 8 ports
Maximum Data Rate 4.0 GB/s
Power 1.60 W
DMA Support Yes
Package 196-PBGA (15 x 15 mm)
Pin Count 196 pins
Manufacturer Broadcom
Device Family PEX 8609

PEX8609-BA50BI 196-pbga (15 x 15 mm) Pin Configuration Guide

Pin configuration for PEX8609-BA50BI (196-pbga (15 x 15 mm) package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

196-pbga (15 x 15 mm) package pinout diagram for PEX8609-BA50BI

No detailed pinout data available for PEX8609-BA50BI.

Refer to the datasheet for full pin configuration.

Typical Applications

PEX8609-BA50BI is suitable for 6 applications: Embedded Compute Expansion, PCIe Storage Controller Platform, Industrial PCIe Control System, Test and Measurement Instrument, Networked Edge Gateway, PCIe Add-In Card.

🖥️

Embedded Compute Expansion

PEX8609-BA50BI fits an embedded platform that needs to connect several PCIe endpoints behind a single host-side interface. Its eight-lane, eight-port architecture and PCIe 2.0 operation provide a managed switching fabric instead of requiring a separate root port for every peripheral. The 196-pin PBGA package is appropriate for dense boards with advanced assembly capability. Before layout release, confirm endpoint link-width requirements, supported topology, reference-clock distribution, reset sequencing, and the allocation of upstream and downstream ports in the Broadcom PEX8609 documentation.

🖥️

PCIe Storage Controller Platform

PEX8609-BA50BI can be evaluated for storage appliances in which multiple PCIe endpoint functions need coordinated access through one upstream link. The eight-port structure and stated 4.0 GB/s maximum rate provide the basis for a multi-endpoint fabric, while DMA capability may reduce host-processor involvement in suitable data-transfer paths. Actual storage performance still depends on endpoint behavior, payload size, congestion, lane allocation, and software. Use the manufacturer configuration and electrical documentation to establish supported port modes and validate the board-level link budget.

🏭

Industrial PCIe Control System

PEX8609-BA50BI is suitable for an industrial controller that must connect acquisition, communication, or motion-related PCIe modules without allocating a root port to each function. Its eight lanes and eight ports support a scalable endpoint arrangement, and the listed 1.60 W power is a key input to system thermal planning. Industrial implementations should also evaluate operating-temperature limits, long-term availability, isolation requirements, and environmental robustness. Exact qualification, temperature limits, and industrial certification must be confirmed from Broadcom documentation before release.

🔧

Test and Measurement Instrument

PEX8609-BA50BI can serve as the central PCIe switch in a modular test instrument that connects several high-speed measurement, signal-processing, or acquisition endpoints. The eight-port topology offers a way to consolidate endpoint access while retaining per-link PCIe transaction handling. Design around the specified 4.0 GB/s maximum rate rather than assuming that aggregate host traffic equals that value. Instrumentation designers should account for BGA assembly, low-noise clock distribution, controlled-impedance routing, synchronization across instruments, and diagnostic visibility during fault isolation.

🌐

Networked Edge Gateway

PEX8609-BA50BI fits an edge gateway that needs PCIe-connected compute, storage, or acceleration hardware in a compact enclosure. Eight lanes and eight ports allow designers to define a more flexible internal interconnect than a fixed one-to-one host arrangement. The 196-pin PBGA footprint can help preserve board density, although it raises assembly and inspection requirements. Gateways operating in harsh environments require confirmation of the device's temperature range and long-term supply status. Thermal analysis should include adjacent processors, high-speed retimers, and memory because the switch's listed power contributes to enclosure heat load.

💻

PCIe Add-In Card

PEX8609-BA50BI is suitable for a PCIe add-in card that turns one card-edge interface into multiple downstream PCIe connections for external or onboard peripherals. The eight-lane, eight-port configuration can simplify cabling in modular systems when compared with numerous independently cabled adapters. The implementation must comply with the card's connector allocation, lane routing, reference-clock distribution, auxiliary-power limits, and enclosure airflow. Confirm the 196-PBGA footprint and assembly process early because this fine-pitch package may require board-design rules that exceed a simple two-layer add-in-card process.

What is the Broadcom PEX8609-BA50BI?
The Broadcom PEX8609-BA50BI is an eight-lane, eight-port PCI Express switch IC operating at PCIe 2.0, with a maximum data rate of 4.0 GB/s. According to the Broadcom PEX 8609 product overview and the manufacturer datasheet, the device also supports DMA and is assembled in a 196-pin PBGA package measuring 15 x 15 mm. It is intended for systems that need to connect multiple PCIe endpoints through a managed switch fabric.
How many PCIe lanes and ports does PEX8609-BA50BI support?
PEX8609-BA50BI supports eight PCIe lanes and eight ports. According to the Broadcom PEX 8609 product overview and manufacturer datasheet, the device is a flexible eight-lane, eight-port PCI Express switch. The exact lane-to-port allocation, operating modes, and downstream port configuration should be taken from the electrical-characteristics and configuration sections of the manufacturer datasheet when planning a complete link topology.
What data rate does the PEX8609-BA50BI support?
PEX8609-BA50BI supports a maximum data rate of 4.0 GB/s, as stated in the Broadcom PEX 8609 manufacturer documentation. This figure corresponds to the identified PCIe 2.0 operating capability. End-to-end application throughput can be lower because traffic is divided among active links, affected by encoding overhead, packet payload size, clocking, peer-device behavior, and system software.
Where can I download the PEX8609-BA50BI datasheet PDF?
The PEX8609 datasheet PDF is available through the Broadcom PEX 8609 documentation link and the referenced PEX8609 datasheet page on alldatasheet.com. The manufacturer documentation is the preferred source for the electrical characteristics, package drawing, register information, and timing specifications. Use the exact PEX8609 documentation when assigning the 196-pin PBGA footprint and checking design constraints.
Where can I find the PEX8609-BA50BI pinout and 196-PBGA footprint?
The PEX8609-BA50BI pin assignment and 196-PBGA footprint are defined by the Broadcom PEX8609 manufacturer datasheet and its package drawing. The package is identified as 196-PBGA in a 15 x 15 mm format. Assign PCB balls only from the official package table, including power, ground, configuration, reference-clock, and high-speed differential signals; do not infer ball functions from a catalog image.
Is PEX8609-BA50BI suitable for an embedded PCIe system?
PEX8609-BA50BI is suitable when an embedded system must expand one host-side PCIe connection into multiple managed downstream links. Its eight lanes, eight ports, PCIe 2.0 operation, 4.0 GB/s maximum rate, and DMA capability support this role. Suitability also depends on the host root-complex capability, endpoint requirements, clock topology, power budget, connector selection, and the density of the 196-pin PBGA assembly.
What is the difference between PEX8609-BA50BI and PEX8609-BA50BIG?
PEX8609-BA50BI and PEX8609-BA50BIG identify the same Broadcom PEX8609 catalog configuration with a spacing or trailing-G difference in the distributor notation. The retrieved listings associate both spellings with the eight-lane, eight-port PCIe 2.0 switch in a 196-pin PBGA. Because no electrical or package difference is identified, use the exact ordering code and manufacturer labeling shown on the device and purchase documents.
When should I choose PEX8609-BA50BI instead of a root-complex port?
Choose PEX8609-BA50BI when one host interface must serve several PCIe endpoints and the platform can accommodate a 196-pin PBGA design. A root-complex port is simpler for one direct endpoint and avoids the extra switch fabric. PEX8609-BA50BI becomes advantageous when port expansion, endpoint management, DMA capability, or a shared PCIe topology provides more system value than the additional board area and signal-integrity work.
Is PEX8609-BA50BI compatible with PCIe 2.0 endpoint devices?
PEX8609-BA50BI is identified as a PCIe 2.0 switch, so it is the appropriate starting point for systems using PCIe 2.0 endpoint behavior. Actual interoperability requires correct link-speed negotiation, supported lane widths, compatible configuration space, reference-clock distribution, reset handling, and endpoint capability matching. Confirm these details in the Broadcom PEX8609 manufacturer documentation before enabling operation in the final system.
What is the best drop-in replacement for PEX8609-BA50BI?
No independently verified, pin-to-pin drop-in replacement was established for PEX8609-BA50BI. The closest catalog notation identified is PEX8609-BA50BIG, which appears to represent the same Broadcom device with a different trailing-G spelling and has a 100% functional match indication in this comparison. For a substitute from another manufacturer, request a formal pin-, protocol-, clock-, package-, and firmware-level compatibility review rather than assuming interchangeability.
Can a Microchip or other PCIe switch replace PEX8609-BA50BI?
A Microchip or other PCIe switch may provide a similar eight-port function, but no candidate was verified as a pin-to-pin replacement for PEX8609-BA50BI. PCIe switches with matching lane and port counts can still differ in ball assignment, link direction, clocking, power domains, reset logic, register model, DMA architecture, and firmware behavior. Treat such devices as redesign candidates unless the manufacturer explicitly confirms drop-in compatibility.
Where can I buy PEX8609-BA50BI online?
Use the Request a Quote form on this page to request PEX8609-BA50BI availability, current pricing, minimum order quantity, and lead time. The exact manufacturer part number is PEX8609-BA50BI, while some channel records display it as PEX8609-BA50BI-G or PEX8609-BA50BIG. Include the acceptable alternate catalog notation in your request so procurement can match the correct Broadcom device.
What is the price of PEX8609-BA50BI?
Current PEX8609-BA50BI pricing is handled through the Request a Quote form on this page because commercial terms can vary with quantity, shipment configuration, and procurement conditions. Do not substitute a family-level PEX8609 price or a different suffix into the quote request. Identify the 196-PBGA device and note whether either PEX8609-BA50BI-G or PEX8609-BA50BIG is an accepted channel spelling.
What is the lead time and stock status for PEX8609-BA50BI?
Request current stock, factory lead time, and minimum order quantity through the Request a Quote form on this page. A PCI Express switch in a 196-pin PBGA package should be ordered under the exact Broadcom part number because catalog suffixes may appear with or without a space and trailing G. Include the required delivery date and production quantity in the request to obtain an actionable supply commitment.
What are the key specifications of PEX8609-BA50BI that engineers should know?
The key PEX8609-BA50BI specifications are eight PCIe lanes, eight ports, PCIe 2.0 operation, a 4.0 GB/s maximum data rate, 1.60 W listed power, DMA capability, and a 196-PBGA package measuring 15 x 15 mm. According to the Broadcom PEX 8609 product overview and manufacturer datasheet, these figures define its core positioning as a dense, multi-endpoint PCI Express switching solution.
What design constraints matter for a PEX8609-BA50BI PCB?
A PEX8609-BA50BI PCB must implement the exact 196-ball BGA land pattern and support high-speed differential routing, low-noise power delivery, and a clean reference clock. Keep high-speed traces over continuous ground planes, control impedance and pair skew, and provide via stitching where the package drawing or design guide calls for it. Validate BGA assembly, X-ray inspection criteria, thermal performance, and connector or package escape routing before fabrication.

Engineering reference data for PEX8609-BA50BI — comparison, design guidance, and compliance information.

Selection Guide

Choose PEX8609-BA50BI when a compact, multi-endpoint PCI Express fabric is required and the design team can implement a 196-pin PBGA layout. Its eight lanes, eight ports, PCIe 2.0 support, DMA capability, and 4.0 GB/s maximum data rate make it a strong fit for embedded systems, storage appliances, industrial controllers, and test equipment. The catalog notation PEX8609-BA50BIG appears functionally identical and may be used when procurement confirms that spelling. Do not select a different manufacturer's PCIe switch solely because it has eight ports: cross-manufacturer alternatives require verification of the ball map, power architecture, reference clock, reset logic, lane direction, register model, and system firmware. For a single endpoint, a simpler root-complex port may be preferable because it avoids the switch, extra routing, and associated design validation. Confirm operating-temperature limits, qualification status, long-term lifecycle commitments, and the complete package drawing before schematic release.

Comparison with Alternatives

Parameter This Product PEX8609-BA50BIG
Brand Broadcom Broadcom
Package 196-PBGA (15 x 15 mm) 196-PBGA (15 x 15 mm)
PCI Express Generation PCIe 2.0 PCIe 2.0
Lane Count 8 lanes 8 lanes
Port Count 8 ports 8 ports
Maximum Data Rate 4.0 GB/s 4.0 GB/s
Power 1.60 W 1.60 W
DMA Support Yes Yes

Key Differentiators

  • Exact Broadcom catalog equivalence (vs PEX8609-BA50BIG)
  • Dense multi-endpoint PCIe switching (vs PEX8609-BA50BIG)
  • Integrated data-movement capability (vs PEX8609-BA50BIG)

Design Notes

Implement the PEX8609-BA50BI 196-PBGA footprint directly from the Broadcom package drawing and preserve the specified ball map. Route all high-speed differential pairs as controlled-impedance nets over continuous reference planes, minimize pair skew, and avoid plane splits beneath the switching region. Include the manufacturer's required via and escape-routing geometry before committing the board stack-up; do not derive ball assignments from a generic 196-ball library.

Validate the complete PCIe link path with the Broadcom PEX8609 reference clock, transmit and receive equalization settings, connector or package escape geometry, and the intended endpoint. Simulation should include insertion loss, return loss, crosstalk, skew, and reference-clock jitter over the intended frequency range. Four GB/s is the identified maximum device data rate, but practical link performance also depends on the complete channel and endpoint capability.

Estimated: using the listed 1.60 W device power, a 196-PBGA assembly may still require attention to adjacent heat sources and copper spreading. The actual junction temperature depends on the package thermal resistance, board construction, airflow, and surrounding components, so calculate it with manufacturer thermal data for the selected land pattern. Provide uninterrupted ground planes and suitable via arrays, and verify the assembled board at the highest expected ambient temperature.

Avoid ordering or schematic labeling solely from catalog abbreviations. PEX8609-BA50BI, PEX8609-BA50BI-G, and PEX8609-BA50BIG appear in different channel records, but the procurement drawing and manufacturer marking should determine the approved part. Also avoid assuming that any PCIe switch with eight ports is interchangeable: verify ball assignment, power rails, clock input, reset polarity, lane direction, reference-clock requirements, register compatibility, and firmware before substitution.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was identified for this orderable MPN. AEC-Q100 is not applicable because the part is not identified as an automotive-qualified device.

Data verified on: 2026-11-11 — data verified and curated by XAIPART's component engineering team

Related Searches

PEX8609-BA50BI datasheet PEX8609-BA50BI pinout PEX8609-BA50BI datasheet pdf PEX8609-BA50BI equivalent PEX8609-BA50BI replacement PEX8609-BA50BI cross reference PEX8609-BA50BI vs PEX8609-BA50BIG PEX8609-BA50BI footprint Broadcom PEX8609-BA50BI PEX8609-BA50BI price PEX8609-BA50BI stock PEX8609 196 PBGA pinout PEX8609 PCIe 2.0 switch PEX8609 embedded PCIe application

Related Components & Terms

Broadcom PEX8609-BA50BI PEX8609-BA50BIG PEX8609 PEX 8609 PCI Express switch PCI Express interface IC PCIe 2.0 PCI Express eight-lane switch eight-port switch DMA Direct Memory Access 196-PBGA BGA-196 15 x 15 mm package embedded computing industrial controller storage platform test and measurement reference clock differential signaling semiconductor interface integrated circuit surface-mount electronics
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details