Broadcom

PEX8747-CA80BC - 48-Lane 5-Port PCIe Gen 3 Switch | Broadcom

部品番号: PEX8747-CA80BC ✓ 生産中
676-FCBGA (27 x 27 mm) Package
MOQ: 1 |

PEX8747-CA80BC 概要

Broadcom PEX8747-CA80BC is a 48-lane, 5-port PCI Express Gen 3 switch IC developed on 40 nm technology and packaged in a 676-FCBGA (27 x 27 mm) surface-mount package. It is designed for multi-host PCI Express systems requiring scalable, high-bandwidth, non-blocking interconnection between a host and multiple endpoints. The device supports PCIe Gen 3 operation at 8 GT/s and is optimized for high-resolution graphics, peer-to-peer traffic, and multicast workloads.

What is a PCI Express switch IC? A PCIe switch is a multiport interface semiconductor that fans out a host PCI Express link to multiple endpoint devices. It provides packet routing, traffic management, buffering, and downstream-port connectivity within one system. In the broader computing hierarchy, the PEX8747 belongs to the PCI Express switch family, interface IC category, semiconductor class, and data-center or workstation interconnect ecosystem. Unlike a simple endpoint controller, this device manages multiple high-speed lanes and can place several graphics, storage, or accelerator devices behind one host connection.

The PEX8747 provides 48 PCI Express lanes across five ports. Broadcom describes the architecture as a non-blocking interconnect suitable for demanding platform topologies, including multi-host configurations and peer-to-peer communication. The 40 nm process supports a high integration level for a large switching device, while the 676-ball FCBGA provides the fine interconnect density needed for high-speed differential signaling. The switch is intended for system-level designs where board area, bandwidth, and downstream-device expansion must be balanced.

Typical applications include GPU servers, high-end graphics workstations, NVMe storage aggregation, FPGA accelerator platforms, industrial visualization systems, and embedded computing platforms with multiple PCIe endpoints. The device is especially relevant when a system requires more downstream connectivity than a root complex can economically provide directly. Its lane count and port count allow designers to consolidate endpoint traffic while preserving independent PCIe paths.

For implementation, treat the PEX8747 as a complex high-speed interface IC rather than a simple analog component. The board design must use the manufacturer’s recommended ball assignments, reference design, power-delivery network, clocking approach, and low-loss routing rules. Validate insertion loss, return loss, reference-clock quality, connector and trace geometry, and system-level reset or enumeration behavior in the final board environment.

This page distinguishes the PEX8747 from adjacent PCI Express switch models, highlights confirmed manufacturer specifications, and identifies same-family ordering variants that may be relevant for sourcing. It also emphasizes that a PCI Express switch’s suitability depends on lane-to-port allocation, firmware, reference design, signal integrity, and thermal performance rather than lane count alone.

ドロップイン代替品: PEX8747-CA80BC — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

PEX8747-CA80FBC-G

✅ ドロップイン
📦 676-FCBGA (27 x 27 mm)
Same PEX8747 family and 676-FCBGA class; decoded ordering options must be verified, with no confirmed quantitative electrical difference

📋 参考代替品(カタログ未掲載)

PEX8747-CA80BFBC-G

✅ ドロップイン
📦 676-FCBGA (27 x 27 mm)
Same PEX8747 family and 676-FCBGA class; decoded ordering options must be verified, with no confirmed quantitative electrical difference

📋 参考代替品(カタログ未掲載)

PEX8747-CA80BC 最大定格&電気的特性

Product Type PCI Express Switch IC
PCI Express Generation Gen 3
Maximum Data Rate 8 GT/s
Total Lane Count 48 lanes
Port Count 5 ports
Architecture Multi-Host PCI Express switching
Interconnect Non-blocking high-bandwidth PCI Express
Process Technology 40 nm
パッケージ 676-FCBGA (27 x 27 mm)
実装タイプ Surface Mount
Maximum Operating Temperature +70 °C
Number of I/O Balls 676 balls
PCIe Traffic Support Peer-to-peer traffic and multicast
Primary Application High-resolution graphics and multi-endpoint computing
RoHS ステータス Compliant
ライフサイクル状態 Active

PEX8747-CA80BC 676-fcbga (27 x 27 mm) ピン配置ガイド

PEX8747-CA80BC (676-fcbga (27 x 27 mm) パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

PEX8747-CA80BC の 676-fcbga (27 x 27 mm) パッケージピン配置図

詳細なピン配置データはありません: PEX8747-CA80BC.

詳細は データシート をご参照ください。

主な用途

PEX8747-CA80BC の用途: 6 件s: GPU Server Expansion, NVMe Storage Aggregation, FPGA Accelerator Platform, High-Resolution Graphics Workstation, Industrial Visualization System, Multi-Host PCIe Platform.

🖥️

GPU Server Expansion

The PEX8747-CA80BC fits GPU-server designs that need several downstream PCIe endpoints behind a high-bandwidth host fabric. Its 48 lanes and five ports provide a scalable, non-blocking switching structure for compatible accelerators, GPUs, and I/O devices at PCIe Gen 3 rates up to 8 GT/s. Compared with assigning host lanes directly to every endpoint, the switch supports denser topology planning and peer-to-peer traffic. Implementation should follow the Broadcom reference design for lane mapping, reference clocking, firmware, connector reach, and power sequencing. Validation must include enumeration, hot-plug behavior where required, sustained traffic, and signal-integrity measurements over every intended trace and connector path.

💾

NVMe Storage Aggregation

The PEX8747-CA80BC is appropriate for NVMe storage aggregation when the selected configuration supports the required endpoint count, lane allocation, and PCIe Gen 3 latency. Its 48 lanes and five ports allow multiple storage controllers to share a switch fabric instead of consuming a separate host root port for every device. The non-blocking architecture can sustain concurrent traffic while supporting peer-to-peer exchanges between suitable endpoints. Designers should confirm multimount, namespace, RAID, and hot-plug requirements outside the switch itself, then reproduce Broadcom’s clock, reference, and power-delivery layouts. Signal-loss and thermal testing under full-width workload are essential before production deployment.

⚡

FPGA Accelerator Platform

The PEX8747-CA80BC suits FPGA accelerator platforms requiring multiple PCIe endpoints connected through a controlled switching fabric. Its five-port, 48-lane configuration can support high-throughput accelerator links, host connectivity, and peer-to-peer paths when the port allocation matches the intended workload. The 40 nm switch fabric is designed for non-blocking Gen 3 traffic, but the board implementation remains the main integration challenge. Use the manufacturer reference design to manage 676-ball escape routing, clock jitter, power sequencing, reference voltage requirements, and firmware initialization. Verify accelerator-specific resets, interrupts, and peer-to-peer addressing rather than assuming transparent protocol behavior.

📺

High-Resolution Graphics Workstation

The PEX8747-CA80BC is designed for high-resolution graphics systems that need flexible downstream endpoint expansion. Broadcom specifically identifies high-resolution graphics and multicast as target workloads for the PEX 8747, while the five-port structure allows compatible graphics and accelerator devices to be organized behind a scalable fabric. This topology can simplify platform planning compared with a host limited by fewer direct PCIe ports. A successful implementation requires correct lane-to-port mapping, deterministic peer-to-peer traffic behavior, and adequate graphics-host driver integration. Validate display-path latency, sustained transfer bandwidth, connector losses, and system thermals because PCIe enumeration alone does not demonstrate acceptable application performance.

🏭

Industrial Visualization System

The PEX8747-CA80BC can serve in industrial visualization systems where cameras, frame grabbers, display controllers, and compute modules require coordinated PCIe connectivity. Its 48 lanes provide substantial downstream bandwidth across five ports, while multi-host operation supports partitioning of endpoints among system hosts when the overall topology permits it. The switch does not remove the need to design deterministic latency, robust clock distribution, and isolated power domains for industrial peripherals. Use the manufacturer reference layout to control 8 GT/s signal integrity and employ environmental testing across temperature and vibration conditions. Software validation should cover endpoint discovery, failover behavior, and sustained visualization data flow.

🌐

Multi-Host PCIe Platform

The PEX8747-CA80BC is specifically suited to multi-host PCI Express platforms because it provides a five-port, 48-lane switching fabric capable of connecting hosts and endpoints through a non-blocking architecture. This topology helps designers build systems that need more endpoint reach than a single root complex offers while preserving distinct host relationships. Port assignment and traffic policy must be designed around the PEX 8747 configuration supported by Broadcom’s documentation. Pay close attention to reset domains, reference-clock topology, peer-to-peer routing, and administrative enumeration during board bring-up. Final qualification should include traffic, thermal, power-integrity, and signal-integrity testing with every production peripheral combination.

おすすめ製品の概要

XMC4400F100K512BAXUMA1 Infineon 使用用途: GPU Server Expansion, FPGA Accelerator Platform PEX8747-CA80FBC-G Same-family switching-device sourcing variant 使用用途: NVMe Storage Aggregation XC2VL3000-2FFG1152E High-capacity FPGA for acceleration endpoint logic 使用用途: FPGA Accelerator Platform MC3403DR Texas Instruments 使用用途: High-Resolution Graphics Workstation TUSB9261PVP Texas Instruments 使用用途: Industrial Visualization System PEX8747-CA80BFBC-G Same-family multi-host switch ordering variant 使用用途: Multi-Host PCIe Platform
What are the key specifications of PEX8747-CA80BC that engineers should know?
The PEX8747-CA80BC is a Broadcom 48-lane, 5-port PCI Express Gen 3 switch IC built on 40 nm technology in a 676-FCBGA package. According to the Broadcom PEX 8747 product page, it supports operation up to 8 GT/s and provides multi-host, non-blocking PCI Express switching for high-resolution graphics, peer-to-peer traffic, and multicast applications. Its principal package dimension is 27 x 27 mm.
What is the PEX8747-CA80BC and what does it do?
The PEX8747-CA80BC is a multi-host PCI Express switch IC that connects one host to multiple endpoints through a scalable, non-blocking fabric. Broadcom specifies 48 lanes, five ports, PCIe Gen 3 operation at 8 GT/s, and 40 nm process technology. It is particularly suited to graphics, accelerator, storage, and workstation platforms that need more downstream connectivity than a single host interface can provide.
Where can I download the PEX8747-CA80BC datasheet PDF?
The official Broadcom PEX 8747 product page is the appropriate starting point for the PEX8747-CA80BC datasheet and supporting technical documentation. The page identifies the device as a 48-lane, 5-port PCIe Gen 3 switch and links to the product documentation portal. Use the manufacturer’s ball-assignment, power, clock, and reference-design material before laying out a new board.
Where can I find the PEX8747-CA80BC pinout?
The complete PEX8747-CA80BC pinout must be taken from the manufacturer’s PEX 8747 datasheet and package-ball information because it contains 676 connections and cannot be reconstructed safely from a distributor summary. Search for PEX 8747 documentation by the exact device family, then verify the ordering code and revision against the board design before assigning signals, supply rails, grounds, and test points.
What is the power consumption of the PEX8747-CA80BC?
A single operating-power figure is not established by the manufacturer product summary, so designers should use the PEX 8747 datasheet for total and lane-dependent power values. Request the exact ordering-code data and the latest product documentation before performing thermal design. The 676-FCBGA package also requires board-level thermal analysis because sustained switching activity can make package and via-array heat removal an important system constraint.
Is the PEX8747-CA80BC suitable for NVMe storage systems?
The PEX8747-CA80BC can be suitable for NVMe aggregation when the system topology, lane allocation, firmware, and PCIe signal-integrity requirements are supported by the PEX 8747 design. Its 48 lanes and five ports allow multiple downstream devices to be connected through a scalable switch fabric. Final suitability depends on the manufacturer’s reference design, endpoint requirements, and validation of the complete interconnect path.
What can replace the PEX8747-CA80BC?
A true replacement should match the PEX8747-CA80BC’s 676-FCBGA footprint, 48-lane device class, five-port configuration, electrical behavior, firmware expectations, and reference design. Same-family Broadcom ordering variants may help with sourcing, but they are not automatically drop-in replacements because ordering codes can encode differences such as firmware, temperature grade, or configuration. Verify the manufacturer’s part-number decoder before substitution.
What is the best drop-in replacement for PEX8747-CA80BC?
The best drop-in replacement is the ordering code that Broadcom explicitly identifies as equivalent to PEX8747-CA80BC, including matching package, lane allocation, port configuration, firmware level, and temperature grade. A close model with the same lane count but a different port count is not automatically interchangeable. Submit the exact MPN to the Request a Quote form on this page for current sourcing and manufacturer-confirmed replacement status.
Is PEX8747-CA80BC the same as PEX8747-CA80FBC-G?
No conclusion should be made solely from the similar ordering codes. PEX8747-CA80FBC-G is a distinct Broadcom ordering variant that may differ in shipping configuration, firmware, grade, or another decoded option. The manufacturer’s part-number decoder and ordering information must confirm equivalence. Treat it as a same-family candidate rather than an unqualified drop-in replacement until every ordering attribute is matched.
Is PEX8747-CA80BC suitable for GPU servers and FPGA accelerators?
The PEX8747-CA80BC is suitable in principle for GPU-server and FPGA-accelerator systems that require a scalable PCIe Gen 3 switch with 48 lanes and five ports. Broadcom highlights high-resolution graphics, peer-to-peer traffic, and multicast as supported workloads. The final design must still validate lane mapping, endpoint bifurcation, clocking, firmware, connector reach, and accelerator-specific power sequencing.
When should I choose the PEX8747-CA80BC instead of another PCIe switch?
Choose the PEX8747-CA80BC when the design specifically benefits from a 48-lane, five-port, PCIe Gen 3 multi-host switch and can support the complexity of a 676-FCBGA implementation. Select another switch if its port count, lane granularity, host topology, power envelope, package, firmware, or thermal design is a closer fit. Lane count alone does not establish compatibility.
How does the PEX8747-CA80BC compare with PEX8748-CA80BCG?
The PEX8747-CA80BC is identified as a 48-lane, five-port PCIe Gen 3 switch, while comparison information identifies PEX8748-CA80BCG as a 48-lane, 12-port PCI Express switch in the same FCBGA-676 class. The changed port count means the two devices are not automatically pin-to-pin drop-in equivalents. Review device diagrams, power sequencing, firmware, and reference designs before considering a port-count change.
Where can I buy PEX8747-CA80BC online?
The PEX8747-CA80BC can be requested through the Request a Quote form on this page, which is the appropriate channel for current availability, exact-ordering-code confirmation, and lead time. The device is also listed by several authorized channels, but stock and commercial terms can change quickly. Submit the exact MPN PEX8747-CA80BC to avoid mismatching it with a related PEX8747 variant.
What is the price of PEX8747-CA80BC?
Current pricing for PEX8747-CA80BC is handled through the Request a Quote form on this page rather than embedded as a static figure. The part is a large, specialized PCIe switch whose exact ordering suffix, quantity, and sourcing condition can affect commercial terms. Submit the full MPN for a current quotation and quantity-break review.
What is the lead time and stock status for PEX8747-CA80BC?
Lead time and stock status should be confirmed through the Request a Quote form on this page for the exact MPN PEX8747-CA80BC. A listing that indicates immediate shipment or inventory does not guarantee that the same quantity and ordering configuration will be available when a production order is placed. Use the quote form for a date-specific manufacturing and allocation response.
What design considerations matter for a PEX8747-CA80BC PCB?
The PEX8747-CA80BC PCB should follow Broadcom’s reference design for ball assignment, layer transitions, differential impedance, clock distribution, power sequencing, and decoupling. The 676-FCBGA package requires careful escape routing and via-in-pad or microvia strategy, while the 8 GT/s PCIe links demand low-loss material and controlled impedance. Validate power integrity, insertion loss, return loss, and thermal performance before production release.
Is the PEX8747-CA80BC RoHS compliant?
The PEX8747-CA80BC is identified as RoHS compliant in the cross-reference product information. RoHS compliance describes restricted-substance requirements for the offered part, but it does not by itself establish automotive qualification, halogen-free status, conflict-minerals compliance, or every regulatory requirement. Those attributes should be confirmed with the manufacturer using the exact ordering code before procurement.

エンジニアリング参考データ: PEX8747-CA80BC — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the PEX8747-CA80BC when the system needs a 48-lane, five-port PCIe Gen 3 switch, operates at up to 8 GT/s, and can support the implementation demands of a 676-FCBGA device. It is particularly appropriate for GPU servers, NVMe aggregation, FPGA accelerators, high-resolution graphics, and multi-host platforms using the manufacturer reference design. Investigate PEX8747-CA80FBC-G or PEX8747-CA80BFBC-G when sourcing the same family, but verify every decoded ordering attribute before treating either as a drop-in replacement. Do not select PEX8748-CA80BCG solely because it also has 48 lanes and an FCBGA-676 package: its 12-port configuration differs materially from the PEX8747’s five ports. If lane granularity, power, firmware, package, thermal limits, or topology do not match, choose the switch specifically recommended by Broadcom for that design instead.

代替品との比較

パラメータ この製品 PEX8747-CA80FBC-G PEX8747-CA80BFBC-G
Brand Broadcom Broadcom Broadcom
Package 676-FCBGA (27 x 27 mm) 676-FCBGA (27 x 27 mm) 676-FCBGA (27 x 27 mm)
Total Lane Count 48 lanes 48 lanes 48 lanes
Port Count 5 ports 5 ports 5 ports
PCI Express Generation Gen 3 Gen 3 Gen 3
Maximum Data Rate 8 GT/s 8 GT/s 8 GT/s
Process Technology 40 nm 40 nm 40 nm
Multi-Host Capability Yes Yes Yes

主な差別化要因

  • Five-port configuration supports denser endpoint expansion (vs PEX8748-CA80BCG)
  • Same-family ordering variants can support procurement planning (vs PEX8747-CA80FBC-G)
  • Multi-host non-blocking switching architecture (vs PEX8747-CA80BFBC-G)

設計ノート

Use the Broadcom PEX 8747 reference layout as the authority for the 676-FCBGA escape geometry, differential impedance, layer transitions, reference-clock routing, power planes, and decoupling. At 8 GT/s, short matched escape paths, well-controlled reference planes, and symmetrical via transitions are essential. Do not derive a new fanout solely from the package outline because pin assignment, supply groups, and high-speed command-and-clock connections determine the viable escape order.

Plan the multi-rail power-delivery network around the manufacturer’s recommended topology, including sequencing, isolation, ramp control, and startup behavior for the switch and its endpoints. Keep high-current return paths tightly connected to the FCBGA via field and account for simultaneous lane activity when estimating regulator and thermal margin. Validate the design with power-integrity simulation and measured rail ripple before enabling full-width traffic, because enumeration success alone does not prove adequate transient response.

The 676-FCBGA package can be thermally demanding under sustained PCIe switching workloads. Couple the device’s exposed package heat-transfer features to the Broadcom-recommended via array and copper structure, and evaluate both junction temperature and board-to-ambient rise in the final enclosure. Use conservative traffic assumptions because accelerator, storage, and peer-to-peer workloads can raise activity relative to a lightly loaded enumeration test. Component-specific power figures must be taken from the exact ordering-code datasheet before calculating cooling capacity.

Validate every PCIe 8 GT/s channel from the BGA escape through connectors or device partners, including insertion loss, return loss, crosstalk, impedance continuity, and reference-clock quality. Use the manufacturer’s test methodology and account for connector, via, and PCB-material losses rather than evaluating only the bare board. Clock jitter and lane-to-lane skew should also be checked because a clean eye diagram at one endpoint does not guarantee reliable operation after connector and package transitions.

コンプライアンス情報

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

RoHS compliance is reported in the product comparison information. Other environmental and material-compliance attributes are not established by the available product information.

関連検索

PEX8747 datasheet PEX8747 CA80FBC G PEX8747 card PEX8747 power consumption PEX8747 CA80FBC PEX8747 NVMe PEX8747 switch PLX PEX8747 PEX8747-CA80BC datasheet pdf PEX8747-CA80BC pinout PEX8747-CA80BC equivalent PEX8747-CA80BC replacement PEX8747-CA80BC footprint Broadcom PEX8747-CA80BC

関連部品&用語

Broadcom PLX Technology PEX8747-CA80BC PEX8747-CA80FBC-G PEX8747-CA80BFBC-G PEX8748-CA80BCG PCI Express Switch PCI Express Gen 3 PCI Interface IC Multi-Host Switching 48-lane switch 5-port switch 8 GT/s 40 nm process technology 676-FCBGA 27 x 27 mm package surface mount non-blocking interconnect peer-to-peer traffic multicast NVMe storage GPU server FPGA accelerator reference clock RoHS
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示