PEX8747-CA80BC - 48-Lane 5-Port PCIe Gen 3 Switch | Broadcom
Артикул: PEX8747-CA80BC ✓ АктивенPEX8747-CA80BC Обзор
What is a PCI Express switch IC? A PCIe switch is a multiport interface semiconductor that fans out a host PCI Express link to multiple endpoint devices. It provides packet routing, traffic management, buffering, and downstream-port connectivity within one system. In the broader computing hierarchy, the PEX8747 belongs to the PCI Express switch family, interface IC category, semiconductor class, and data-center or workstation interconnect ecosystem. Unlike a simple endpoint controller, this device manages multiple high-speed lanes and can place several graphics, storage, or accelerator devices behind one host connection.
The PEX8747 provides 48 PCI Express lanes across five ports. Broadcom describes the architecture as a non-blocking interconnect suitable for demanding platform topologies, including multi-host configurations and peer-to-peer communication. The 40 nm process supports a high integration level for a large switching device, while the 676-ball FCBGA provides the fine interconnect density needed for high-speed differential signaling. The switch is intended for system-level designs where board area, bandwidth, and downstream-device expansion must be balanced.
Typical applications include GPU servers, high-end graphics workstations, NVMe storage aggregation, FPGA accelerator platforms, industrial visualization systems, and embedded computing platforms with multiple PCIe endpoints. The device is especially relevant when a system requires more downstream connectivity than a root complex can economically provide directly. Its lane count and port count allow designers to consolidate endpoint traffic while preserving independent PCIe paths.
For implementation, treat the PEX8747 as a complex high-speed interface IC rather than a simple analog component. The board design must use the manufacturer’s recommended ball assignments, reference design, power-delivery network, clocking approach, and low-loss routing rules. Validate insertion loss, return loss, reference-clock quality, connector and trace geometry, and system-level reset or enumeration behavior in the final board environment.
This page distinguishes the PEX8747 from adjacent PCI Express switch models, highlights confirmed manufacturer specifications, and identifies same-family ordering variants that may be relevant for sourcing. It also emphasizes that a PCI Express switch’s suitability depends on lane-to-port allocation, firmware, reference design, signal integrity, and thermal performance rather than lane count alone.
Аналоги без доработки для PEX8747-CA80BC — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
PEX8747-CA80FBC-G
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PEX8747-CA80BFBC-G
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PEX8747-CA80BC Максимальные параметры и электрические характеристики
| Product Type | PCI Express Switch IC |
| PCI Express Generation | Gen 3 |
| Maximum Data Rate | 8 GT/s |
| Total Lane Count | 48 lanes |
| Port Count | 5 ports |
| Architecture | Multi-Host PCI Express switching |
| Interconnect | Non-blocking high-bandwidth PCI Express |
| Process Technology | 40 nm |
| Корпус | 676-FCBGA (27 x 27 mm) |
| Тип монтажа | Surface Mount |
| Maximum Operating Temperature | +70 °C |
| Number of I/O Balls | 676 balls |
| PCIe Traffic Support | Peer-to-peer traffic and multicast |
| Primary Application | High-resolution graphics and multi-endpoint computing |
| Статус RoHS | Compliant |
| Статус жизненного цикла | Active |
Руководство по цоколевке PEX8747-CA80BC в корпусе 676-fcbga (27 x 27 mm)
Цоколевка для PEX8747-CA80BC (корпус 676-fcbga (27 x 27 mm)). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для PEX8747-CA80BC.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
PEX8747-CA80BC подходит для 6 применениеs: GPU Server Expansion, NVMe Storage Aggregation, FPGA Accelerator Platform, High-Resolution Graphics Workstation, Industrial Visualization System, Multi-Host PCIe Platform.
GPU Server Expansion
The PEX8747-CA80BC fits GPU-server designs that need several downstream PCIe endpoints behind a high-bandwidth host fabric. Its 48 lanes and five ports provide a scalable, non-blocking switching structure for compatible accelerators, GPUs, and I/O devices at PCIe Gen 3 rates up to 8 GT/s. Compared with assigning host lanes directly to every endpoint, the switch supports denser topology planning and peer-to-peer traffic. Implementation should follow the Broadcom reference design for lane mapping, reference clocking, firmware, connector reach, and power sequencing. Validation must include enumeration, hot-plug behavior where required, sustained traffic, and signal-integrity measurements over every intended trace and connector path.
Рекомендуется
NVMe Storage Aggregation
The PEX8747-CA80BC is appropriate for NVMe storage aggregation when the selected configuration supports the required endpoint count, lane allocation, and PCIe Gen 3 latency. Its 48 lanes and five ports allow multiple storage controllers to share a switch fabric instead of consuming a separate host root port for every device. The non-blocking architecture can sustain concurrent traffic while supporting peer-to-peer exchanges between suitable endpoints. Designers should confirm multimount, namespace, RAID, and hot-plug requirements outside the switch itself, then reproduce Broadcom’s clock, reference, and power-delivery layouts. Signal-loss and thermal testing under full-width workload are essential before production deployment.
Рекомендуется
FPGA Accelerator Platform
The PEX8747-CA80BC suits FPGA accelerator platforms requiring multiple PCIe endpoints connected through a controlled switching fabric. Its five-port, 48-lane configuration can support high-throughput accelerator links, host connectivity, and peer-to-peer paths when the port allocation matches the intended workload. The 40 nm switch fabric is designed for non-blocking Gen 3 traffic, but the board implementation remains the main integration challenge. Use the manufacturer reference design to manage 676-ball escape routing, clock jitter, power sequencing, reference voltage requirements, and firmware initialization. Verify accelerator-specific resets, interrupts, and peer-to-peer addressing rather than assuming transparent protocol behavior.
Рекомендуется
High-Resolution Graphics Workstation
The PEX8747-CA80BC is designed for high-resolution graphics systems that need flexible downstream endpoint expansion. Broadcom specifically identifies high-resolution graphics and multicast as target workloads for the PEX 8747, while the five-port structure allows compatible graphics and accelerator devices to be organized behind a scalable fabric. This topology can simplify platform planning compared with a host limited by fewer direct PCIe ports. A successful implementation requires correct lane-to-port mapping, deterministic peer-to-peer traffic behavior, and adequate graphics-host driver integration. Validate display-path latency, sustained transfer bandwidth, connector losses, and system thermals because PCIe enumeration alone does not demonstrate acceptable application performance.
Рекомендуется
Industrial Visualization System
The PEX8747-CA80BC can serve in industrial visualization systems where cameras, frame grabbers, display controllers, and compute modules require coordinated PCIe connectivity. Its 48 lanes provide substantial downstream bandwidth across five ports, while multi-host operation supports partitioning of endpoints among system hosts when the overall topology permits it. The switch does not remove the need to design deterministic latency, robust clock distribution, and isolated power domains for industrial peripherals. Use the manufacturer reference layout to control 8 GT/s signal integrity and employ environmental testing across temperature and vibration conditions. Software validation should cover endpoint discovery, failover behavior, and sustained visualization data flow.
Рекомендуется
Multi-Host PCIe Platform
The PEX8747-CA80BC is specifically suited to multi-host PCI Express platforms because it provides a five-port, 48-lane switching fabric capable of connecting hosts and endpoints through a non-blocking architecture. This topology helps designers build systems that need more endpoint reach than a single root complex offers while preserving distinct host relationships. Port assignment and traffic policy must be designed around the PEX 8747 configuration supported by Broadcom’s documentation. Pay close attention to reset domains, reference-clock topology, peer-to-peer routing, and administrative enumeration during board bring-up. Final qualification should include traffic, thermal, power-integrity, and signal-integrity testing with every production peripheral combination.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PEX8747-CA80BC — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PEX8747-CA80FBC-G | PEX8747-CA80BFBC-G |
|---|---|---|---|
| Brand | Broadcom | Broadcom | Broadcom |
| Package | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) |
| Total Lane Count | 48 lanes | 48 lanes | 48 lanes |
| Port Count | 5 ports | 5 ports | 5 ports |
| PCI Express Generation | Gen 3 | Gen 3 | Gen 3 |
| Maximum Data Rate | 8 GT/s | 8 GT/s | 8 GT/s |
| Process Technology | 40 nm | 40 nm | 40 nm |
| Multi-Host Capability | Yes | Yes | Yes |
Ключевые отличия
- Five-port configuration supports denser endpoint expansion (против PEX8748-CA80BCG)
- Same-family ordering variants can support procurement planning (против PEX8747-CA80FBC-G)
- Multi-host non-blocking switching architecture (против PEX8747-CA80BFBC-G)
Заметки по проектированию
Use the Broadcom PEX 8747 reference layout as the authority for the 676-FCBGA escape geometry, differential impedance, layer transitions, reference-clock routing, power planes, and decoupling. At 8 GT/s, short matched escape paths, well-controlled reference planes, and symmetrical via transitions are essential. Do not derive a new fanout solely from the package outline because pin assignment, supply groups, and high-speed command-and-clock connections determine the viable escape order.
Plan the multi-rail power-delivery network around the manufacturer’s recommended topology, including sequencing, isolation, ramp control, and startup behavior for the switch and its endpoints. Keep high-current return paths tightly connected to the FCBGA via field and account for simultaneous lane activity when estimating regulator and thermal margin. Validate the design with power-integrity simulation and measured rail ripple before enabling full-width traffic, because enumeration success alone does not prove adequate transient response.
The 676-FCBGA package can be thermally demanding under sustained PCIe switching workloads. Couple the device’s exposed package heat-transfer features to the Broadcom-recommended via array and copper structure, and evaluate both junction temperature and board-to-ambient rise in the final enclosure. Use conservative traffic assumptions because accelerator, storage, and peer-to-peer workloads can raise activity relative to a lightly loaded enumeration test. Component-specific power figures must be taken from the exact ordering-code datasheet before calculating cooling capacity.
Validate every PCIe 8 GT/s channel from the BGA escape through connectors or device partners, including insertion loss, return loss, crosstalk, impedance continuity, and reference-clock quality. Use the manufacturer’s test methodology and account for connector, via, and PCB-material losses rather than evaluating only the bare board. Clock jitter and lane-to-lane skew should also be checked because a clean eye diagram at one endpoint does not guarantee reliable operation after connector and package transitions.
Информация о соответствии
RoHS compliance is reported in the product comparison information. Other environmental and material-compliance attributes are not established by the available product information.