PI7C9X113SLFDEX - 32-Bit 66MHz PCIe Bridge | Diodes
部品番号: PI7C9X113SLFDEX ✓ 生産中PI7C9X113SLFDEX 概要
A PCI Express-to-PCI bridge is an interface controller that translates transactions between two different bus architectures. PCIe uses serial, point-to-point links, while conventional PCI and PCI-X use a shared parallel bus. A bridge controller such as the PI7C9X113SL integrates the transaction conversion, clocking, arbitration, and protocol functions required to connect these domains within a computer or embedded platform.
The PI7C9X113SL supports forward bridging and transparent-mode operation, giving system designers flexibility when integrating a legacy parallel-bus subsystem behind a PCIe host interface. Its 128-LQFP package provides the pin count needed for separate power, ground, PCI data, PCI control, and PCIe interface signals. The exact operating voltage limits, lane width, power consumption, temperature limits, and pin assignments should be confirmed in the manufacturer datasheet before schematic capture.
This bridge is associated with legacy expansion-system support rather than general-purpose signal processing. It is relevant to industrial control systems, test equipment, data-acquisition platforms, communication appliances, and specialized embedded computers that retain PCI or PCI-X peripherals while exposing a modern PCIe host connection. The product is identified as a 32-bit, 66MHz PCI bridge chip in distributor and manufacturer-related listings.
A drop-in redesign must preserve the 128-LQFP footprint, pin assignments, supply requirements, reference-clock arrangement, PCI-side termination, and the supported bridge operating modes. Although related PI7C9X113SL order codes exist, package or ordering suffixes can alter temperature grade, lead-finish status, or production packaging. A mechanical match alone should therefore not be treated as a functional substitution.
For a new design, use the manufacturer pin-description table and reference circuit to assign the exposed-pad connection, supply rails, reference clock, and bus termination. Confirm signal-integrity constraints on the parallel PCI bus and provide the decoupling required by the datasheet. The system designer must also verify that the downstream operating system and device drivers support the intended PCI-to-PCIe bridge topology.
This product page consolidates the manufacturer bridge description, package information, protocol compliance, ordering information, and drop-in replacement guidance into a design-focused reference. It helps engineers identify the correct MPN, distinguish the bridge from unrelated PCI interface ICs, and evaluate mechanical and electrical compatibility before committing a board layout.
ドロップイン代替品: PI7C9X113SLFDEX — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストPI7C9X113SLFDEX 最大定格&電気的特性
| Product Type | PCI Express-to-PCI/PCI-X bridge |
| PCI Interface Width | 32 bit |
| PCI Operating Frequency | 66 MHz |
| パッケージ | 128-LQFP (14 mm x 14 mm) |
| 実装タイプ | Surface mount |
| Operating Modes | Forward bridging and transparent mode |
| PCI Express Base Specification | Revision 1.1 |
| PCI Express Card Electromechanical Specification | Revision 1.1 |
| PCI Local Bus Specification | Revision 3.0 |
| PCI Express-to-PCI/PCI-X Bridge Specification | Revision 1.0 |
| ピン数 | 128 pins |
| Exposed Pad | Present |
| Shipping Packaging | Tape and reel |
| Standard Shipping Quantity | 1000 pieces |
PI7C9X113SLFDEX 128-lqfp (14 mm x 14 mm) ピン配置ガイド
PI7C9X113SLFDEX (128-lqfp (14 mm x 14 mm) パッケージ) のピン配置。 このパワーデバイスは、ゲート、ドレイン、ソース端子を備えています。非極性パッケージの場合、正確なピン1の向きとフットプリントの詳細については、メーカーのデータシートを参照してください。主な用途には、電源設計、モータ駆動、負荷スイッチングがあります。
詳細なピン配置データはありません: PI7C9X113SLFDEX.
詳細は データシート をご参照ください。
主な用途
PI7C9X113SLFDEX の用途: 6 件s: Industrial PCI Data-Acquisition Systems, PCIe Test and Measurement Instruments, Specialized Embedded Computing Platforms, Medical and Diagnostic Equipment, Communication and Network Appliances, Legacy Expansion Card Retrofit.
Industrial PCI Data-Acquisition Systems
PI7C9X113SLFDEX fits legacy industrial data-acquisition platforms that retain a 32-bit PCI or PCI-X expansion card while the enclosure exposes a modern PCIe host interface. The bridge provides the transaction conversion required between the serial PCIe domain and the parallel PCI/PCI-X domain, with forward bridging and transparent-mode operation listed by the manufacturer. A system integrator can therefore preserve an existing PCI instrument card without redesigning its internal bus connector and driver interface. The design must still validate electrical loading, clocking, termination, operating-system support, and driver behavior for the selected peripheral.
おすすめ
PCIe Test and Measurement Instruments
PI7C9X113SLFDEX is suitable for test and measurement equipment that combines a PCIe host computer with legacy PCI acquisition, signal-generation, or interface cards. The 32-bit, 66MHz parallel PCI capability lets an existing PCI card operate behind a PCIe-oriented chassis instead of requiring a complete peripheral redesign. Forward bridging supports conventional host-to-target transaction flow, while transparent mode provides another configuration for compatible systems. Engineers should verify the selected instrument card's timing, bus-mastering requirements, driver support, and signal-integrity margins against the manufacturer bridge requirements before production.
おすすめ
Specialized Embedded Computing Platforms
PI7C9X113SLFDEX can support embedded and communication platforms that need to preserve a PCI/PCI-X expansion ecosystem while adopting PCIe at the host boundary. Its 128-LQFP package supports integration on a conventional multilayer PCB, and the bridge's support for transparent-mode operation gives system architects additional deployment flexibility. This is particularly useful for industrial controllers and communication appliances with field-proven PCI modules. The implementation must account for the shared parallel-bus topology, proper termination, reference-clock routing, adequate supply bypassing, and any limitations imposed by the downstream operating system or proprietary device driver.
おすすめ
Medical and Diagnostic Equipment
PI7C9X113SLFDEX can be evaluated for medical and diagnostic systems that retained legacy PCI acquisition modules while moving the enclosure interface toward PCIe. The bridge's 32-bit parallel downstream path and 66MHz operating capability can allow qualified PCI instruments to communicate with a PCIe host processor. Transparent mode and forward bridging offer configuration choices when the host software and peripheral drivers support them. Because medical equipment demands controlled configurations and documented component traceability, the design team must confirm regulatory suitability, exact order-code qualification, electrical limits, and long-term availability rather than inferring them from the bridge family name.
おすすめ
Communication and Network Appliances
PI7C9X113SLFDEX fits communication appliances that combine a PCIe-based host section with legacy PCI or PCI-X modules for specialized connectivity, storage, or signaling functions. The bridge provides a defined translation boundary between the serial PCIe interface and the parallel legacy bus, reducing the need to reproduce that compatibility logic on an FPGA or host processor. Forward bridging is appropriate for normal host-to-target transactions, while transparent mode may assist systems requiring a different configuration. Board-level validation must confirm timing margins, connector and termination choices, interrupt behavior, and operating-system enumeration of every installed legacy card.
おすすめ
Legacy Expansion Card Retrofit
PI7C9X113SLFDEX can support a retrofit platform intended to preserve a proven PCI expansion card while replacing the original host interface with PCIe. The 32-bit, 66MHz PCI side and the manufacturer's forward-bridging and transparent-mode functions provide the essential bridge behavior for compatible cards. This approach can reduce peripheral redesign effort, although it does not remove the need to validate the complete bus topology. Engineers should check card-loading limits, timing requirements, reference-clock sources, software compatibility, and the exact 128-LQFP footprint before committing the retrofit to production.
おすすめ
エンジニアリング参考データ: PI7C9X113SLFDEX — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | Diodes Incorporated |
| Package | 128-LQFP (14 mm x 14 mm) |
| Product Type | PCI Express-to-PCI/PCI-X bridge |
| PCI Interface Width | 32 bit |
| PCI Operating Frequency | — |
| PCI Express Specification | Revision 1.1 |
| PCI Local Bus Specification | Revision 3.0 |
| Operating Modes | Forward bridging and transparent mode |
設計ノート
Use the manufacturer 128-LQFP land pattern and exposed-pad drawing rather than creating a footprint from package dimensions alone. Preserve the prescribed via and copper geometry beneath the exposed pad, keep high-speed PCIe routing away from the parallel PCI region where practical, and route the reference clock as a controlled-length network. Check every pin against the manufacturer pin-description table before releasing the PCB.
The parallel PCI/PCI-X side is a shared-bus interface, so termination, stub length, topology, and loading deserve careful review. Follow the manufacturer's reference circuit for termination and interface routing, keep branch lengths controlled, and validate the assembled board with the intended peripheral cards. PCIe edge-rate behavior, reference-clock jitter, and cross-domain timing should be examined together rather than optimized independently.
Separate supply requirements and decoupling values must be taken directly from the manufacturer datasheet because they are not stated in the catalog summary. Provide local bulk and high-frequency decoupling at the appropriate power pins, maintain the specified return paths, and account for exposed-pad current in the power-distribution network. Avoid assigning supplies or capacitor values by analogy with another bridge in the same family.
Do not treat a shared package outline as proof of drop-in compatibility. The PCI side width and frequency, PCIe interface details, operating mode, clocking, electrical limits, exposed-pad connection, environmental grade, and software support must all match. Also verify that the host operating system enumerates the intended legacy device and that the required driver supports the intended transparent-mode or forward-bridge configuration.
コンプライアンス情報
Compliance must be confirmed for the exact PI7C9X113SLFDEX order code through the manufacturer or an authorized sourcing channel. The PCI specification revisions identify bus standards rather than environmental compliance.