Diodes Incorporated

PI7C9X113SLFDEX - 32-Bit 66MHz PCIe Bridge | Diodes

MPN: PI7C9X113SLFDEX ✓ فعال
128-LQFP (14 mm x 14 mm) Package 66 MHz Speed Revision 1.1 Memory
حداقل سفارش: 1 |

PI7C9X113SLFDEX نمای کلی

Diodes Incorporated PI7C9X113SLFDEX is a 32-bit, 66MHz PCI Express-to-PCI/PCI-X bridge housed in a 128-pin LQFP package. It supports a 32-bit parallel PCI/PCI-X interface on one side and a PCI Express link on the other, allowing legacy PCI expansion devices to operate through a PCIe host system. The device also supports transparent-mode operation and forward bridging according to the manufacturer product page.

A PCI Express-to-PCI bridge is an interface controller that translates transactions between two different bus architectures. PCIe uses serial, point-to-point links, while conventional PCI and PCI-X use a shared parallel bus. A bridge controller such as the PI7C9X113SL integrates the transaction conversion, clocking, arbitration, and protocol functions required to connect these domains within a computer or embedded platform.

The PI7C9X113SL supports forward bridging and transparent-mode operation, giving system designers flexibility when integrating a legacy parallel-bus subsystem behind a PCIe host interface. Its 128-LQFP package provides the pin count needed for separate power, ground, PCI data, PCI control, and PCIe interface signals. The exact operating voltage limits, lane width, power consumption, temperature limits, and pin assignments should be confirmed in the manufacturer datasheet before schematic capture.

This bridge is associated with legacy expansion-system support rather than general-purpose signal processing. It is relevant to industrial control systems, test equipment, data-acquisition platforms, communication appliances, and specialized embedded computers that retain PCI or PCI-X peripherals while exposing a modern PCIe host connection. The product is identified as a 32-bit, 66MHz PCI bridge chip in distributor and manufacturer-related listings.

A drop-in redesign must preserve the 128-LQFP footprint, pin assignments, supply requirements, reference-clock arrangement, PCI-side termination, and the supported bridge operating modes. Although related PI7C9X113SL order codes exist, package or ordering suffixes can alter temperature grade, lead-finish status, or production packaging. A mechanical match alone should therefore not be treated as a functional substitution.

For a new design, use the manufacturer pin-description table and reference circuit to assign the exposed-pad connection, supply rails, reference clock, and bus termination. Confirm signal-integrity constraints on the parallel PCI bus and provide the decoupling required by the datasheet. The system designer must also verify that the downstream operating system and device drivers support the intended PCI-to-PCIe bridge topology.

This product page consolidates the manufacturer bridge description, package information, protocol compliance, ordering information, and drop-in replacement guidance into a design-focused reference. It helps engineers identify the correct MPN, distinguish the bridge from unrelated PCI interface ICs, and evaluate mechanical and electrical compatibility before committing a board layout.

جایگزین‌های drop-in برای PI7C9X113SLFDEX — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

هیچ جایگزین مستقیمی برای این محصول موجود نیست.

درخواست جایگزین

PI7C9X113SLFDEX حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type PCI Express-to-PCI/PCI-X bridge
PCI Interface Width 32 bit
PCI Operating Frequency 66 MHz
بسته‌بندی 128-LQFP (14 mm x 14 mm)
نوع نصب Surface mount
Operating Modes Forward bridging and transparent mode
PCI Express Base Specification Revision 1.1
PCI Express Card Electromechanical Specification Revision 1.1
PCI Local Bus Specification Revision 3.0
PCI Express-to-PCI/PCI-X Bridge Specification Revision 1.0
تعداد پین‌ها 128 pins
Exposed Pad Present
Shipping Packaging Tape and reel
Standard Shipping Quantity 1000 pieces

راهنمای پیکربندی پین PI7C9X113SLFDEX 128-lqfp (14 mm x 14 mm)

پیکربندی پین برای PI7C9X113SLFDEX (پکیج 128-lqfp (14 mm x 14 mm)). این قطعه قدرت دارای پایانه‌های گیت، درین و سورس است. برای پکیج‌های غیرقطبی، برای جهت دقیق پین ۱ و جزئیات فوت‌پرینت به دیتاشیت سازنده مراجعه کنید. کاربردهای رایج شامل طراحی منبع تغذیه، درایو موتور و سوئیچینگ بار است.

نمودار پین‌آوت پکیج 128-lqfp (14 mm x 14 mm) برای PI7C9X113SLFDEX

داده پین‌آوت تفصیلی موجود نیست برای PI7C9X113SLFDEX.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

PI7C9X113SLFDEX مناسب است برای 6 کاربردs: Industrial PCI Data-Acquisition Systems, PCIe Test and Measurement Instruments, Specialized Embedded Computing Platforms, Medical and Diagnostic Equipment, Communication and Network Appliances, Legacy Expansion Card Retrofit.

🏭

Industrial PCI Data-Acquisition Systems

PI7C9X113SLFDEX fits legacy industrial data-acquisition platforms that retain a 32-bit PCI or PCI-X expansion card while the enclosure exposes a modern PCIe host interface. The bridge provides the transaction conversion required between the serial PCIe domain and the parallel PCI/PCI-X domain, with forward bridging and transparent-mode operation listed by the manufacturer. A system integrator can therefore preserve an existing PCI instrument card without redesigning its internal bus connector and driver interface. The design must still validate electrical loading, clocking, termination, operating-system support, and driver behavior for the selected peripheral.

🔧

PCIe Test and Measurement Instruments

PI7C9X113SLFDEX is suitable for test and measurement equipment that combines a PCIe host computer with legacy PCI acquisition, signal-generation, or interface cards. The 32-bit, 66MHz parallel PCI capability lets an existing PCI card operate behind a PCIe-oriented chassis instead of requiring a complete peripheral redesign. Forward bridging supports conventional host-to-target transaction flow, while transparent mode provides another configuration for compatible systems. Engineers should verify the selected instrument card's timing, bus-mastering requirements, driver support, and signal-integrity margins against the manufacturer bridge requirements before production.

🌐

Specialized Embedded Computing Platforms

PI7C9X113SLFDEX can support embedded and communication platforms that need to preserve a PCI/PCI-X expansion ecosystem while adopting PCIe at the host boundary. Its 128-LQFP package supports integration on a conventional multilayer PCB, and the bridge's support for transparent-mode operation gives system architects additional deployment flexibility. This is particularly useful for industrial controllers and communication appliances with field-proven PCI modules. The implementation must account for the shared parallel-bus topology, proper termination, reference-clock routing, adequate supply bypassing, and any limitations imposed by the downstream operating system or proprietary device driver.

💊

Medical and Diagnostic Equipment

PI7C9X113SLFDEX can be evaluated for medical and diagnostic systems that retained legacy PCI acquisition modules while moving the enclosure interface toward PCIe. The bridge's 32-bit parallel downstream path and 66MHz operating capability can allow qualified PCI instruments to communicate with a PCIe host processor. Transparent mode and forward bridging offer configuration choices when the host software and peripheral drivers support them. Because medical equipment demands controlled configurations and documented component traceability, the design team must confirm regulatory suitability, exact order-code qualification, electrical limits, and long-term availability rather than inferring them from the bridge family name.

🌐

Communication and Network Appliances

PI7C9X113SLFDEX fits communication appliances that combine a PCIe-based host section with legacy PCI or PCI-X modules for specialized connectivity, storage, or signaling functions. The bridge provides a defined translation boundary between the serial PCIe interface and the parallel legacy bus, reducing the need to reproduce that compatibility logic on an FPGA or host processor. Forward bridging is appropriate for normal host-to-target transactions, while transparent mode may assist systems requiring a different configuration. Board-level validation must confirm timing margins, connector and termination choices, interrupt behavior, and operating-system enumeration of every installed legacy card.

🔧

Legacy Expansion Card Retrofit

PI7C9X113SLFDEX can support a retrofit platform intended to preserve a proven PCI expansion card while replacing the original host interface with PCIe. The 32-bit, 66MHz PCI side and the manufacturer's forward-bridging and transparent-mode functions provide the essential bridge behavior for compatible cards. This approach can reduce peripheral redesign effort, although it does not remove the need to validate the complete bus topology. Engineers should check card-loading limits, timing requirements, reference-clock sources, software compatibility, and the exact 128-LQFP footprint before committing the retrofit to production.

What is PI7C9X113SLFDEX?
PI7C9X113SLFDEX is a Diodes Incorporated PCI Express-to-PCI/PCI-X bridge controller for legacy expansion systems. According to the manufacturer product page, it supports forward bridging and transparent-mode operation, uses a 32-bit parallel PCI interface, and is packaged in a 128-LQFP configuration. The associated ordering information identifies a maximum PCI operating frequency of 66MHz.
What bus standards does PI7C9X113SLFDEX support?
PI7C9X113SLFDEX supports PCI Express Revision 1.1, PCI Express Card Electromechanical Revision 1.1, PCI Local Bus Revision 3.0, and the PCI Express-to-PCI/PCI-X Bridge Specification Revision 1.0. These protocol statements come from the Diodes Incorporated product description for the PI7C9X113SL family and should be used as the baseline when checking system compatibility.
Where can I download the PI7C9X113SLFDEX datasheet PDF?
The PI7C9X113SLFDEX datasheet PDF can be accessed through the Diodes Incorporated technical document linked on this page. The document describes the PI7C9X113SL PCI Express bridge and provides the electrical, pin, functional, and application information needed for hardware design. Use its pin-description and recommended-application sections as the authoritative references for board implementation.
Where can I find the PI7C9X113SLFDEX pinout?
The PI7C9X113SLFDEX pinout is defined in the pin-description table of the manufacturer datasheet. The device uses a 128-LQFP package, so the complete signal map includes the PCI/PCI-X parallel-bus pins, PCI Express interface pins, power and ground connections, clock connections, and exposed-pad treatment. Assign PCB tracks directly from the manufacturer table rather than inferring positions from a family outline.
What is the PI7C9X113SLFDEX package?
PI7C9X113SLFDEX is supplied in a 128-LQFP package measuring 14mm by 14mm. Manufacturer-related listings identify an exposed pad, while catalog listings identify tape-and-reel shipping with a quantity of 1000 pieces. Because the package has 128 pins, verify the exposed-pad connection and land pattern against the manufacturer package drawing during PCB design.
Can PI7C9X113SLFDEX bridge a PCIe host to a legacy PCI device?
Yes, PI7C9X113SLFDEX is intended to connect a PCI Express host to a conventional PCI or PCI-X device domain. It supports a 32-bit interface operating up to 66MHz and provides forward-bridging and transparent-mode functions. Operating-system support, driver compatibility, bus-loading limits, and the exact electrical requirements must still be validated in the complete system.
What is the difference between PI7C9X113SLFDEX and PI7C9X113SLFDE?
PI7C9X113SLFDEX and PI7C9X113SLFDE identify closely related 128-LQFP versions of the PI7C9X113SL bridge, but the final order code can distinguish qualification, environmental, or shipping characteristics. The manufacturer documentation and product ordering table should determine whether the electrical revision and environmental grade are identical. Do not approve either part as a replacement based only on its package suffix.
Is PI7C9X113SLFDEX the same as PI7C9X2G404SLBFDE?
No direct equivalence is established for PI7C9X113SLFDEX and PI7C9X2G404SLBFDE. The comparison listing places them side by side, but that does not prove pin compatibility, protocol equivalence, or electrical interchangeability. A genuine drop-in replacement must match the 128-LQFP footprint, PCI/PCI-X behavior, reference clock, supply rails, signal mapping, and bridge mode requirements.
When should I choose PI7C9X113SLFDEX over another PCIe bridge?
Choose PI7C9X113SLFDEX when the system specifically needs a 32-bit, 66MHz PCI/PCI-X bridge with forward-bridging and transparent-mode support in a 128-LQFP footprint. Select another controller only when its protocol revision, host interface, downstream bus width, operating mode, package, power design, and software support satisfy the complete system requirements. Legacy expansion compatibility is more important than generic interface feature count.
What is the best drop-in replacement for PI7C9X113SLFDEX?
No alternative can be confirmed as a true drop-in replacement for PI7C9X113SLFDEX from the available cross-reference information. A valid replacement must use the same 128-LQFP land pattern and preserve every electrical and functional characteristic, including the 32-bit 66MHz PCI/PCI-X side, PCI Express interface, reference clock, supplies, and operating modes. Related order codes should not be used without manufacturer confirmation.
Where can I buy PI7C9X113SLFDEX?
PI7C9X113SLFDEX can be requested through the Request a Quote form on this page, where the exact suffix and tape-and-reel packaging can be stated. Current inventory, lead time, and commercial terms should be confirmed with XAIPART during quotation. The manufacturer and catalog links on this page remain useful for confirming the datasheet, lifecycle information, and ordering identity.
How much does PI7C9X113SLFDEX cost?
Use the Request a Quote form on this page for the current PI7C9X113SLFDEX quotation. Because pricing for legacy interface controllers can vary with quantity, production status, packaging, and market availability, a static price would not represent the current transaction accurately. Include your required quantity, target date, and reel or tray preference with the request.
Is PI7C9X113SLFDEX in stock and what is its lead time?
Current PI7C9X113SLFDEX inventory and lead time should be confirmed through the Request a Quote form on this page. The available catalog information confirms the exact MPN, 128-LQFP package, and tape-and-reel format, but it does not establish a fixed stock position or production lead-time commitment. Provide your schedule and annual usage so the quotation can reflect the appropriate supply plan.
Does PI7C9X113SLFDEX comply with RoHS and REACH?
RoHS and REACH status must be confirmed for the exact PI7C9X113SLFDEX order code through the manufacturer's current compliance documentation or the XAIPART Request a Quote process. Do not infer environmental compliance solely from the bridge's protocol revision or package. The qualification and regulatory status can differ across related order codes, so the exact suffix is essential for traceability.
What are the key specifications of PI7C9X113SLFDEX that engineers should know?
PI7C9X113SLFDEX is a 32-bit, 66MHz PCI Express-to-PCI/PCI-X bridge in a 128-LQFP package with an exposed pad. It supports forward bridging and transparent-mode operation and aligns with PCI Express Revision 1.1, PCI Local Bus Revision 3.0, and the PCI Express-to-PCI/PCI-X Bridge Specification Revision 1.0. Its primary engineering role is connecting a legacy parallel expansion bus to a PCIe host.

داده‌های مرجع مهندسی برای PI7C9X113SLFDEX — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

PI7C9X113SLFDEX is appropriate when a design must connect a PCIe host to a legacy 32-bit PCI or PCI-X device and specifically requires the PI7C9X113SL family's forward-bridging and transparent-mode functions in a 128-LQFP package. Confirm the exact electrical revision, temperature grade, supply requirements, clock arrangement, and exposed-pad implementation before schematic release. Related PI7C9X113SL order codes may share the outline, but ordering and environmental suffixes can prevent unqualified substitution. PI7C9X2G404SLBFDE should not be selected as a direct replacement without documented pin, protocol, timing, and operating-mode equivalence. For new systems without a legacy PCI requirement, a contemporary native PCI peripheral may reduce bridge complexity, board area, and software-support risk.

مقایسه با جایگزین‌ها

پارامتر این محصول
Brand Diodes Incorporated
Package 128-LQFP (14 mm x 14 mm)
Product Type PCI Express-to-PCI/PCI-X bridge
PCI Interface Width 32 bit
PCI Operating Frequency —
PCI Express Specification Revision 1.1
PCI Local Bus Specification Revision 3.0
Operating Modes Forward bridging and transparent mode

یادداشت‌های طراحی

Use the manufacturer 128-LQFP land pattern and exposed-pad drawing rather than creating a footprint from package dimensions alone. Preserve the prescribed via and copper geometry beneath the exposed pad, keep high-speed PCIe routing away from the parallel PCI region where practical, and route the reference clock as a controlled-length network. Check every pin against the manufacturer pin-description table before releasing the PCB.

The parallel PCI/PCI-X side is a shared-bus interface, so termination, stub length, topology, and loading deserve careful review. Follow the manufacturer's reference circuit for termination and interface routing, keep branch lengths controlled, and validate the assembled board with the intended peripheral cards. PCIe edge-rate behavior, reference-clock jitter, and cross-domain timing should be examined together rather than optimized independently.

Separate supply requirements and decoupling values must be taken directly from the manufacturer datasheet because they are not stated in the catalog summary. Provide local bulk and high-frequency decoupling at the appropriate power pins, maintain the specified return paths, and account for exposed-pad current in the power-distribution network. Avoid assigning supplies or capacitor values by analogy with another bridge in the same family.

Do not treat a shared package outline as proof of drop-in compatibility. The PCI side width and frequency, PCIe interface details, operating mode, clocking, electrical limits, exposed-pad connection, environmental grade, and software support must all match. Also verify that the host operating system enumerates the intended legacy device and that the required driver supports the intended transparent-mode or forward-bridge configuration.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

Compliance must be confirmed for the exact PI7C9X113SLFDEX order code through the manufacturer or an authorized sourcing channel. The PCI specification revisions identify bus standards rather than environmental compliance.

تاریخ تأیید داده‌ها: 2026-11-17 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

PI7C9X113SLFDEX datasheet PI7C9X113SLFDEX pinout PI7C9X113SLFDEX datasheet pdf PI7C9X113SLFDEX equivalent PI7C9X113SLFDEX replacement PI7C9X113SLFDEX cross reference PI7C9X113SLFDEX 128 LQFP PI7C9X113SLFDEX 32 bit 66MHz PI7C9X113SLFDEX PCIe bridge PI7C9X113SLFDEX price PI7C9X113SLFDEX stock Diodes PI7C9X113SLFDEX

قطعات و اصطلاحات مرتبط

Diodes Incorporated PI7C9X113SLFDEX PI7C9X113SL PI7C9X113SLFDE PI7C9X2G404SLBFDE PCI Express PCI PCI-X PCI Express-to-PCI/PCI-X bridge Interface IC bus bridge semiconductor forward bridging transparent mode 32-bit PCI interface 66MHz PCI frequency 128-LQFP LQFP package family surface-mount package exposed pad PCI Local Bus Revision 3.0 PCI Express Base Revision 1.1 industrial data acquisition legacy expansion bridge
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ