PIC16C65B-04I/PQ - 8-Bit 4MHz MCU 7KB OTP 33 I/O | Microchip
部品番号: PIC16C65B-04I/PQ ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $8.5 | $8.50 |
| 10 | $7.65 | $76.50 |
| 100 | $6.8 | $680.00 |
| 500 | $6.1 | $3,050.00 |
| 1,000 | $5.45 | $5,450.00 |
PIC16C65B-04I/PQ 概要
A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, and peripheral interfaces. Within the broader semiconductor taxonomy, an MCU sits below microprocessor (MPU) and above DSP and ASIC in system-integration depth. The PIC16CXX mid-range family is one of Microchip's foundational 8-bit lines, characterized by a 14-bit instruction word and Harvard architecture - meaning separate program and data buses - delivering deterministic interrupt latency and compact code density relative to von-Neumann 8-bit alternatives.
Key features include 33 digital I/O pins arranged across multiple ports (PORTB through PORTE), two 8-bit timer/counters plus one 16-bit timer/counter, a synchronous serial port (SSP) supporting SPI and I2C master/slave modes, and a brown-out reset (BOR) circuit. The industrial temperature grade ('I' suffix) guarantees operation from -40 C to +85 C, while the 04 speed grade denotes a 4 MHz maximum oscillator input. The OTP memory architecture supports prototype runs and low-to-medium volume production where flash reprogrammability is not required.
Architecturally, the PIC16C65B uses a Harvard bus with a 14-bit program word and 8-bit data path, achieving single-cycle instruction execution except for branches. The 4 MHz oscillator combined with a 4:1 internal divider yields a 1 MHz instruction clock, with 1 MIPS sustained throughput. Brown-out reset, watchdog timer, and power-on reset are integrated, reducing external component count in cost-sensitive designs.
Typical applications include industrial automation controllers, embedded instrumentation with the on-chip ADC, motor control via the CCP PWM outputs, point-of-sale terminals, and legacy embedded systems where PIC16C-series firmware is already deployed. The OTP memory makes the device well-suited to production runs once firmware is finalized.
When designing with this part, verify that the 4 MHz oscillator limit is compatible with required throughput, and ensure the OTP memory strategy aligns with production volume - if firmware updates are anticipated, choose the PIC16F-series flash equivalent. The MQFP package requires a minimum 1 oz copper pour and thermal vias for reliable operation above 25 C ambient.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: PIC16C65B-04I/PQ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC16C65B-04I/PQ （同一形状・フットプリント） — 相違点: Timers, Package, Core Architecture, Mounting Type, CCP Modules.
クイック比較ツール — 並列比較する代替部品を選択:
PIC16C65B-04E/PQ
✅ ドロップイン✓ 在庫あり
$11.1 / 個
データシートを見る →PIC16C65B-04/PQ
✅ ドロップイン✓ 在庫あり
$10.25 / 個
データシートを見る →PIC16C65A-04I/PQ
✅ ドロップイン✓ 在庫あり
$9.95 / 個
データシートを見る →PIC16C65AT-04I/PQ
✅ ドロップイン✓ 在庫あり
$7.95 / 個
データシートを見る →PIC16C65A-20I/PQ
✅ ドロップイン✓ 在庫あり
$8.62 / 個
データシートを見る →PIC16C65B-04I/PQ 最大定格＆電気的特性
| Core Architecture | 8-bit PIC mid-range (Harvard) |
| Instruction Set Width | 14-bit |
| Program Memory Type | OTP (One-Time-Programmable) |
| Program Memory Size | 7 KB (4K x 14 words) |
| RAM Size | 192 bytes |
| 最大クロック周波数 | 4 MHz |
| Instruction Throughput | 1 MIPS |
| I/O Pins | 33 |
| ADC Channels | 5 x 8-bit (on 'B' silicon) |
| Timers | Two 8-bit + one 16-bit |
| CCP Modules | 2 |
| Communication Peripherals | USART, SSP (SPI / I2C), Parallel Slave Port |
| 電源電圧 | 4.0 V to 6.0 V |
| 動作温度 | -40 C to +85 C (Industrial, 'I' suffix) |
| パッケージ | 44-pin MQFP (10 x 10 mm) |
| 実装タイプ | Surface Mount |
| Speed Grade | 04 (4 MHz max) |
PIC16C65B-04I/PQ ピン構成
| ピン 1 | MCLR/VPP — Master Clear (reset) input / programming voltage |
| ピン 2 | RA0/AN0 — PORTA bit 0 / Analog input 0 |
| ピン 3 | RA1/AN1 — PORTA bit 1 / Analog input 1 |
| ピン 4 | RA2/AN2 — PORTA bit 2 / Analog input 2 |
| ピン 5 | RA3/AN3/VREF — PORTA bit 3 / Analog input 3 / ADC voltage reference |
| ピン 6 | RA4/T0CKI — PORTA bit 4 / Timer 0 clock input |
| ピン 7 | RA5/AN4/SS — PORTA bit 5 / Analog input 4 / SPI slave select |
| ピン 8 | VSS — Ground |
| ピン 9 | OSC1/CLKIN — Oscillator crystal input / external clock |
| ピン 10 | OSC2/CLKOUT — Oscillator crystal output / clock output |
| ピン 11 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer 1 oscillator output / Timer 1 clock input |
| ピン 12 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer 1 oscillator input / CCP2 output |
| ピン 13 | RC2/CCP1 — PORTC bit 2 / CCP1 output |
| ピン 14 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| ピン 15 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| ピン 16 | RC5/SDO — PORTC bit 5 / SPI data out |
| ピン 17 | RC6/TX/CK — PORTC bit 6 / USART TX / USART clock |
| ピン 18 | RC7/RX/DT — PORTC bit 7 / USART RX / USART data |
| ピン 19 | VSS — Ground |
| ピン 20 | VDD — Positive supply voltage |
| ピン 21 | RB0/INT — PORTB bit 0 / External interrupt |
| ピン 22 | RB1 — PORTB bit 1 |
| ピン 23 | RB2 — PORTB bit 2 |
| ピン 24 | RB3 — PORTB bit 3 |
| ピン 25 | RB4 — PORTB bit 4 |
| ピン 26 | RB5 — PORTB bit 5 |
| ピン 27 | RB6/PGC — PORTB bit 6 / ICSP clock |
| ピン 28 | RB7/PGD — PORTB bit 7 / ICSP data |
| ピン 29 | VSS — Ground |
| ピン 30 | VDD — Positive supply voltage |
| ピン 31 | VSS — Ground |
| ピン 32 | RD0 — PORTD bit 0 (parallel slave port data) |
| ピン 33 | RD1 — PORTD bit 1 (parallel slave port data) |
| ピン 34 | RD2 — PORTD bit 2 (parallel slave port data) |
| ピン 35 | RD3 — PORTD bit 3 (parallel slave port data) |
| ピン 36 | RD4 — PORTD bit 4 (parallel slave port data) |
| ピン 37 | RD5 — PORTD bit 5 (parallel slave port data) |
| ピン 38 | RD6 — PORTD bit 6 (parallel slave port data) |
| ピン 39 | RD7 — PORTD bit 7 (parallel slave port data) |
| ピン 40 | RE0/RD/AN5 — PORTE bit 0 / parallel slave port read / Analog input 5 |
| ピン 41 | RE1/WR/AN6 — PORTE bit 1 / parallel slave port write / Analog input 6 |
| ピン 42 | RE2/CS/AN7 — PORTE bit 2 / parallel slave port chip select / Analog input 7 |
| ピン 43 | VDD — Positive supply voltage |
| ピン 44 | VSS — Ground |
主な用途
PIC16C65B-04I/PQ の用途: 6 件s: Industrial Automation Controller, Embedded Instrumentation with ADC, Motor Control with CCP PWM, Point-of-Sale Terminal, Legacy System Maintenance, Educational and Training Boards.
Industrial Automation Controller
The PIC16C65B-04I/PQ fits industrial PLC and machine controller boards where its 33 digital I/O pins, two CCP/PWM modules, and 5-channel 8-bit ADC directly drive sensor inputs, relay outputs, and PWM-controlled valves or motors. The 4 MHz throughput is sufficient for sequencing relay logic and reading analog process variables at sub-kHz rates. Industrial -40 C to +85 C temperature rating supports factory-floor enclosures without additional thermal conditioning. Drop-in compatibility with PIC16C65B-04/PQ enables stocking a single PCB for both commercial and industrial variants.
おすすめ
Embedded Instrumentation with ADC
The PIC16C65B-04I/PQ's 5-channel 8-bit on-chip ADC eliminates an external converter in digital panel meters, weigh scales, and process indicators. Combined with the I2C/SPI SSP for sensor interfacing and USART for data logging output, the device functions as a complete single-chip measurement subsystem. The 192-byte RAM supports local data buffering before UART transmission. Industrial temperature rating suits outdoor and uncontrolled-environment deployments.
おすすめ
Motor Control with CCP PWM
The two on-chip Capture/Compare/PWM modules of the PIC16C65B-04I/PQ drive brushed DC motor speed control and small stepper sequencing in appliance, fan, and pump controllers. The 33 I/O pins handle direction relays, enable lines, and Hall-effect sensor inputs. At 4 MHz the PWM frequency is suitable for sub-10 kHz motor drive, well within audible band limits for low-noise applications. The industrial temperature grade supports HVAC and white-goods deployments.
おすすめ
Point-of-Sale Terminal
POS terminals and electronic cash registers use the PIC16C65B-04I/PQ for keyboard scanning, display driving, and serial communication to receipt printers via the USART. The 7 KB OTP program memory fits legacy firmware, and the 33 I/O pins accommodate 4x4 key matrices plus LCD interface lines. The 4 MHz throughput is adequate for transaction processing rates typical of retail terminals. Industrial temperature grade handles variable store environments.
おすすめ
Legacy System Maintenance
The PIC16C65B-04I/PQ is maintained in production lines supporting installed equipment where firmware compatibility is mandatory. Customers with field-deployed PIC16C65B firmware continue sourcing this part for repair and refurbishment. The OTP memory prevents accidental firmware corruption during board swap. Industrial temperature rating matches the original deployment environment. Distributors continue stocking the part despite Microchip's obsolete classification for this aftermarket support role.
おすすめ
Educational and Training Boards
Universities and embedded-systems training programs use the PIC16C65B-04I/PQ in microcontroller teaching laboratories because the mid-range 14-bit instruction set illustrates fundamental MCU concepts without the complexity of modern peripherals. The 44-pin MQFP package is widely accepted by academic soldering workstations, and the OTP architecture forces students to verify code before programming. The 4 MHz speed grade keeps timing analysis tractable for introductory coursework.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC16C65B-04I/PQ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC16C65B-04E/PQ | PIC16C65B-04/PQ | PIC16C65A-04I/PQ | PIC16C65AT-04I/PQ | PIC16C65A-20I/PQ |
|---|---|---|---|---|---|---|
| Package | 44-pin MQFP (10x10 mm) | 44-pin MQFP (10x10 mm) - same | 44-pin MQFP (10x10 mm) - same | 44-pin MQFP (10x10 mm) - same | 44-pin MQFP (10x10 mm) - same | 44-pin MQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 20 MHz |
| Program Memory | 7 KB OTP | 7 KB OTP | 7 KB OTP | 7 KB OTP | 7 KB OTP | 7 KB OTP |
| Operating Temperature | -40 C to +85 C (Industrial) | -40 C to +125 C (Extended) | 0 C to +70 C (Commercial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) |
| ADC Channels | 5 x 8-bit | 5 x 8-bit | 5 x 8-bit | None | None | None |
| Parallel Slave Port | Yes | Yes | Yes | No | No | No |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
主な差別化要因
- Integrated 5-channel 8-bit ADC on B silicon （vs PIC16C65A-04I/PQ)
- Parallel Slave Port for external bus interface （vs PIC16C65A-04I/PQ)
- Industrial temperature range vs commercial-only alternative （vs PIC16C65B-04/PQ)
設計ノート
Estimated: At 4 MHz clock with all peripherals active and 33 I/O pins loaded at typical CMOS input levels, the PIC16C65B-04I/PQ draws approximately 10-15 mA from a 5 V supply, dissipating roughly 50-75 mW. Place a 100 nF decoupling capacitor within 5 mm of each VDD pin and a 10 uF bulk capacitor at the board supply entry. The four VDD pins (20, 30, 31, 43) and four VSS pins (8, 19, 29, 31) must all be connected for proper operation.
The 44-pin MQFP package has 0.8 mm pitch leads; the PCB land pattern must follow IPC-7351 MQFP standards with 0.4 mm wide pads and 1.5 mm pad length. Route signals on inner layers only; keep the area beneath the package free of traces to allow post-solder inspection. Add a thermal pad pattern to the exposed die attach pad even though the MQFP-44 is not a true no-lead package, since the die-attach paddle improves heat spreading.
The PIC16C65B silicon requires a precise programming sequence for OTP memory; using a generic device programmer without the PIC16C65B device file will fail verification. Brown-out reset must be enabled in the configuration word for industrial deployments, or the device may execute corrupted code at supply-edge transitions. The MCLR pin cannot be left floating - tie through a 10 kohm pull-up to VDD to prevent spurious resets.
コンプライアンス情報
Legacy OTP MQFP package is not lead-free; not AEC-Q100 qualified (consumer/industrial grade only). REACH status compliant per Microchip product declaration. For RoHS-compliant equivalent, choose PIC16F877A-20I/PQ.
