Microchip Technology

PIC16C715/JW - 8-Bit 20MHz MCU, 3.5KB EPROM, 18-CERDIP Window | Microchip

部品番号: PIC16C715/JW ✗ 生産終了
在庫あり 1〜3営業日以内に発送
4.0 V to 5.5 V Vdss 18-CERDIP window (through-hole) Package 20 MHz Speed EPROM (OTP, UV-erasable in window package) Memory
開始価格 $9.75 USD / 個
MOQ: 1 |
価格更新日: 2026-09-18
ボリューム価格
数量 単価 小計
1 $14.5 $14.50
10 $13.2 $132.00
100 $11.95 $1,195.00
500 $10.8 $5,400.00
1,000 $9.75 $9,750.00
ℹ️ すべての価格はUSDです

PIC16C715/JW 概要

The Microchip Technology PIC16C715/JW is an 8-bit CMOS RISC microcontroller in an 18-pin CERDIP windowed package, featuring 20MHz maximum clock speed, 3.5KB (2K x 14) of one-time-programmable (OTP) EPROM program memory, and 128 bytes of RAM. It operates from a 4V to 5.5V supply and integrates 4 channels of 8-bit Analog-to-Digital converter, 13 I/O pins, and an external oscillator interface, all in a UV-erasable CERDIP form factor intended for through-hole prototyping.

A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and configurable peripherals on one die. Within the broader taxonomy, the PIC16C715 belongs to the 8-bit microcontroller family, specifically Microchip's mid-range PIC16C architecture (PIC16 -> PIC16C -> PIC16C7xx), itself a branch of the PIC RISC family of microcontrollers and finally a category of embedded processors / semiconductors. Engineers choose OTP-EPROM PIC MCUs for low-volume production runs where in-system reprogrammability is not required but a known-good code pattern has been validated.

Key features include 4 channels of 8-bit A/D conversion (suitable for sensor interfaces in automotive, industrial, appliance, and consumer products), 13 digital I/O pins, a 20MHz oscillator input that yields 200ns instruction execution, and only 35 single-word instructions to learn. The CERDIP window package allows UV erasure during development, which is uncommon in modern MCU packages and signals the part's heritage as a development-friendly variant within the PIC16C7xx line.

The PIC16C715 core is a Harvard-architecture RISC CPU with separate program and data buses, supporting a 14-bit instruction word and an 8-bit data path. It executes one instruction per internal clock cycle (four oscillator clocks) and provides a hardware interrupt controller, watchdog timer, and power-on reset. The 8-bit A/D converter uses successive-approximation register (SAR) topology with analog input multiplexing across four channels.

Typical applications include automotive sensor interfaces, industrial control, consumer appliance controllers, and low-cost embedded products requiring analog input. The wide 4V-5.5V range and 13 I/O pins make it well suited to motor-control front ends and user-interface panels with mixed analog/digital signals.

When designing with the PIC16C715, ensure your toolchain is configured for the PIC16C7xx device family and use Microchip's MPASM assembler or C compilers with the appropriate header file. The /JW windowed package is intended for engineering development; for production, switch to a one-time-programmable PDIP or windowless CERDIP variant.

This page synthesizes distributor pricing, drop-in alternatives from Microchip's PIC16C family and competing 8-bit MCU lines, and practical design notes not found in the manufacturer datasheet alone.

ドロップイン代替品: PIC16C715/JW — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: PIC16C715/JW (同一形状・フットプリント) — 相違点: Core Architecture, Program Memory Size, Package, Timers, Mounting Type.

Microchip Technology
Core Architecture: 8-bit PIC16CXX mid-range (Harvard)
Program Memory Size: 1.75KB (1K x 14 words)
Timers: Timer0: 8-bit timer/counter with 8-bit prescaler
Microchip Technology
Core Architecture: PIC 8-bit RISC
Program Memory Size: 1.75 KB (1K x 14 words)
Package: 18-pin CERDIP (JW, windowed)
Microchip Technology
Program Memory Size: 1.75 KB (1K x 14)
Package: 18-pin CERDIP with window (JW)
Timers: Timer0 (8-bit), Timer1 (16-bit), Timer2 (8-bit)
Microchip Technology
Package: 18-pin PDIP (0.300 inch / 7.62 mm)
Timers: Timer0: 8-bit with 8-bit prescaler
Mounting Type: Through-Hole (DIP)
Microchip Technology
Core Architecture: PIC 8-bit RISC (Harvard)
Package: 28-pin Ceramic DIP windowed (CerDip, JW)
Timers: 3 (Timer0, Timer1, Timer2)
Microchip Technology
Core Architecture: PIC16 mid-range 8-bit RISC
Program Memory Size: 7 KB (4K x 14 words)
Package: 20-pin CDIP (JW, ceramic windowed)
Microchip Technology
Core Architecture: PIC16C (Enhanced Mid-Range RISC)
Program Memory Size: 1.75 KB (1K x 14) EPROM, UV-erasable
Mounting Type: Through Hole
Microchip Technology
Core Architecture: PIC16C RISC 8-bit
Program Memory Size: 3.5 KB (2K x 14) EPROM, UV-erasable
Mounting Type: Through-Hole (windowed ceramic DIP)

クイック比較ツール — 並列比較する代替部品を選択:

PIC16F716-I/P

✅ ドロップイン
📦 PDIP-18
Flash-based (not EPROM), same 18-pin PDIP footprint, pin-to-pin compatible

📋 参考代替品(カタログ未掲載)

PIC16C712/JW

✅ ドロップイン
Microchip Technology
📦 18-CERDIP window
PIC16C 8-bit RISC (14-bit instruction word) · UV EPROM (OTP-style, erasable in JW window package) · 1.75 KB (1K x 14) · 128 bytes · 128 bytes · 20 MHz · 200 ns · 4 channels, 8-bit resolution

✓ 在庫あり

$11.2 / 個

データシートを見る →

PIC16C711/JW

✅ ドロップイン ⚠️ 仕様未検証
Microchip Technology
📦 18-CERDIP window
PIC 8-bit RISC · EPROM (UV-erasable, windowed CERDIP) · 1.75 KB (1K x 14 words) · 68 bytes · 20 MHz · 200 ns · 35 single-word instructions · 13

✓ 在庫あり

$10.95 / 個

データシートを見る →

PIC16C71/JW

✅ ドロップイン ⚠️ 仕様未検証
Microchip Technology
📦 18-CERDIP window
8-bit PIC16CXX mid-range (Harvard) · UV-erasable EPROM (windowed CERDIP) · 1.75KB (1K x 14 words) · 36 bytes · 20 MHz · 200 ns · 35 single-word · 13 (individually direction-controlled)

✓ 在庫あり

$11.95 / 個

データシートを見る →

PIC16F716T-I/SS

✅ ドロップイン
📦 SSOP-20
Flash-based 16F716 in surface-mount SSOP-20, requires PCB pad change vs CERDIP-18

📋 参考代替品(カタログ未掲載)

PIC16C715/JW 最大定格&電気的特性

Core Architecture PIC16C / 8-bit RISC (Harvard)
Program Memory Type EPROM (OTP, UV-erasable in window package)
Program Memory Size 3.5 KB (2K x 14 words)
RAM 128 bytes
Maximum CPU Clock 20 MHz
Instruction Cycle Time 200 ns
Instruction Set Size 35 single-word instructions
Supply Voltage (VDD) 4.0 V to 5.5 V
I/O Pins 13
A/D Converter 4 channels x 8-bit SAR
Oscillator Type External
パッケージ 18-CERDIP window (through-hole)
動作温度 0C to +70C (commercial)
実装タイプ Through-Hole (DIP/WDIP)
RoHS ステータス Contains Pb (non-RoHS, windowed CERDIP)

PIC16C715/JW ピン構成

DIP-18 Package Pinout Diagram DIP-18 18-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 18 2 17 3 16 4 15 5 14 6 13 7 12 8 11 9 10 DIP-18
ピン 1 /MCLR — Master Clear (reset) input, active low
ピン 2 RA0/AN0 — PORTA bit 0 / analog input channel 0
ピン 3 RA1/AN1 — PORTA bit 1 / analog input channel 1
ピン 4 RA2/AN2 — PORTA bit 2 / analog input channel 2
ピン 5 RA3/AN3 — PORTA bit 3 / analog input channel 3
ピン 6 RA4 — PORTA bit 4 (digital only)
ピン 7 VSS — Ground reference
ピン 8 OSC1 — External oscillator input
ピン 9 OSC2 — Oscillator output / external clock
ピン 10 RC0 — PORTC bit 0
ピン 11 RC1 — PORTC bit 1
ピン 12 RC2 — PORTC bit 2
ピン 13 RC3 — PORTC bit 3
ピン 14 RC4 — PORTC bit 4
ピン 15 RC5 — PORTC bit 5
ピン 16 RC6 — PORTC bit 6
ピン 17 RC7 — PORTC bit 7
ピン 18 VDD — Positive supply (4.0V to 5.5V)

主な用途

PIC16C715/JW の用途: 6 件s: Automotive Sensor Interface, Industrial Process Control, Consumer Appliance Controllers, Embedded Education and Prototyping, User Interface Panel Controllers, Low-Volume Legacy Equipment Repair.

🚗

Automotive Sensor Interface

The PIC16C715/JW's 4 channels of 8-bit A/D converter are well matched to automotive sensor interfaces where multiple analog inputs (temperature, pressure, position) require digitization. With 20MHz clock and 200ns instruction execution, the MCU handles real-time sampling up to several kHz per channel. The 4V to 5.5V operating range tolerates typical automotive 5V rails, though a regulator is recommended for 12V battery inputs.

🏭

Industrial Process Control

For industrial process controllers monitoring multiple analog inputs and driving digital outputs, the PIC16C715/JW provides 4 A/D channels and 13 I/O pins in one package. The PIC RISC core's deterministic 200ns instruction timing simplifies PLC-style control loop design. The wide 4-5.5V supply tolerates regulated 5V industrial rails with brown-out margin.

🔧

Consumer Appliance Controllers

Consumer appliances such as washing machines, microwave ovens, and HVAC controls need a low-cost 8-bit MCU with analog inputs for sensor feedback and digital I/O for switches, relays, and displays. The PIC16C715/JW integrates 4 A/D channels plus 13 I/O, enabling single-chip control of user interface plus sensor monitoring. The windowed CERDIP is ideal for prototype development.

🧩

Embedded Education and Prototyping

The /JW windowed CERDIP package makes the PIC16C715 a popular choice for embedded systems education and prototype development. The UV-transparent quartz window allows full EPROM erasure and reprogramming, supporting iterative development cycles typical in academic and R&D environments. The simple 35-instruction PIC mid-range instruction set eases learning.

📺

User Interface Panel Controllers

The PIC16C715/JW handles user-interface panels that combine multiple analog inputs (e.g., trim pots, light sensors) with digital switch scanning and LED or 7-segment display driving. With 13 I/O pins and 4 A/D channels, it can directly interface with button matrices and analog adjustments without external multiplexing. The PIC RISC architecture supports fast button-debounce and display-multiplex routines.

🔧

Low-Volume Legacy Equipment Repair

The PIC16C715/JW is sought for repairing legacy industrial and scientific equipment where the original EPROM-based MCU must be replaced with a pin-compatible part. As of 2026-09-18, the NRND status means inventory is shrinking, making this windowed CERDIP a critical replacement part for end-of-life systems. Engineers should validate firmware compatibility before swap-in.

おすすめ製品の概要

PIC16F716-I/P Pin-compatible flash successor for new automotive designs 使用用途: Automotive Sensor Interface, Industrial Process Control, Consumer Appliance Controllers, Embedded Education and Prototyping, Low-Volume Legacy Equipment Repair MCP9700 Analog temperature sensor feeding the A/D channels 使用用途: Automotive Sensor Interface MCP23017 I/O expander for additional digital channels 使用用途: Industrial Process Control PIC16C712/JW Microchip Technology 使用用途: User Interface Panel Controllers
What is the program memory size of PIC16C715/JW?
The PIC16C715/JW contains 3.5KB of EPROM program memory, organized as 2K x 14-bit words. According to the Microchip datasheet, this is OTP (one-time programmable) in standard CERDIP packages, but the /JW suffix denotes a UV-transparent windowed CERDIP that allows erasure with a UV eraser during development.
Is PIC16C715/JW still in production?
The PIC16C715 is flagged Not Recommended for New Designs (NRND) by Microchip. A newer replacement, the flash-based PIC16F716, is pin-compatible and recommended for new designs. The /JW windowed CERDIP package is now sourced primarily from distributors' remaining inventory, not from new factory production.
What is the best drop-in replacement for PIC16C715/JW?
The best drop-in replacement is the PIC16F716, a flash-memory-based successor in the same 18-pin package family. According to the Microchip product page, PIC16F716 maintains pin compatibility while providing modern flash memory instead of EPROM, eliminating the need for UV erasure during firmware development.
What is the difference between PIC16C715/JW and PIC16F716-I/P?
The PIC16C715/JW uses 3.5KB EPROM in a windowed 18-CERDIP package, while the PIC16F716-I/P uses flash memory in a 18-PDIP package. Both share the PIC16C7xx core architecture with 4 channels of 8-bit A/D and 13 I/O pins. The PIC16F716 supports in-circuit serial programming and does not require UV erasure.
How many A/D converter channels does PIC16C715 have?
The PIC16C715 integrates 4 channels of 8-bit successive-approximation A/D converter. According to the Microchip datasheet, these channels are multiplexed through dedicated analog input pins and are suitable for automotive, industrial, appliance, and consumer sensor interface applications where multiple analog signals need digitization.
What is the operating voltage range of PIC16C715/JW?
The PIC16C715 operates from 4.0V to 5.5V on VDD. The datasheet specifies 5V nominal operation with a tolerance suitable for standard digital logic interfaces. Operation below 4.0V is not guaranteed and may cause brown-out issues; operation above 5.5V risks permanent device damage.
What oscillator does PIC16C715/JW require?
The PIC16C715 uses an external oscillator; no internal oscillator is provided. Engineers typically connect a crystal across OSC1/OSC2 with appropriate loading capacitors, or drive OSC1 with an external clock source. The maximum clock frequency is 20MHz, yielding a 200ns instruction cycle.
Where to download PIC16C715/JW datasheet PDF?
The PIC16C715 datasheet is available from Microchip's official website at https://ww1.microchip.com/downloads/en/DeviceDoc/30209a.pdf. The datasheet contains the full electrical specification, A/D converter timing diagrams, instruction set reference, and 18-pin CERDIP mechanical drawings.
What is the pinout of PIC16C715 18-CERDIP?
The PIC16C715 18-pin CERDIP follows the standard PIC16C7xx pinout: pin 1 is /MCLR (reset), pin 2 is RA0 (analog input 0), pins 3-5 are RA1-RA3, pin 6 is RA4, pin 7 is VSS, pin 8 is OSC1, pin 9 is OSC2, pin 10 is RC0, pins 11-15 are RC1-RC5, pin 16 is RC6, pin 17 is RC7, pin 18 is VDD. Refer to the datasheet for exact function assignment.
Can PIC16F716 replace PIC16C715 without PCB changes?
Yes, the PIC16F716 is pin-compatible with the PIC16C715 in PDIP packages; both share the 18-pin DIP footprint with identical pin functions. However, the /JW windowed CERDIP variant of PIC16C715 differs from the standard PDIP footprint, so verify mechanical compatibility before swapping ceramic DIPs.
What is the price of PIC16C715/JW as of 2026?
As of 2026-09-18, PIC16C715/JW pricing from authorized distributors starts around $14.50 per unit in single-piece quantity. Pricing varies by distributor; DigiKey, Mouser, and Heisener typically list current stock. Given NRND status, prices may rise as inventory depletes; consider PIC16F716 for new designs.
What is the difference between PIC16C715 and PIC16C711?
The PIC16C715 adds 4 channels of 8-bit A/D converter that the PIC16C711 lacks. Both share the 18-pin PIC16C7xx core, 13 I/O pins, 128 bytes of RAM, and the 35-instruction PIC mid-range instruction set. If your application requires analog input, PIC16C715 is the correct choice; for purely digital designs, PIC16C711 suffices at lower cost.
Is PIC16C715 RoHS compliant?
The PIC16C715/JW in windowed CERDIP package contains lead (Pb) in the ceramic glass frit and is not RoHS compliant. Standard CERDIP PIC16C715 variants without the window are typically also non-RoHS due to the CERDIP glass seal composition. For RoHS-compliant designs, consider the PIC16F716 in PDIP or SOIC packages.
How many I/O pins does PIC16C715 have?
The PIC16C715 provides 13 bidirectional I/O pins organized as two ports: PORTA (5 pins, RA0-RA4 with analog capability on RA0-RA3) and PORTC (8 pins, RC0-RC7). Pin count is identical to the PIC16C711 and PIC16C712 family members, simplifying migration between these variants.

エンジニアリング参考データ: PIC16C715/JW — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose PIC16C715/JW when you need an 8-bit PIC MCU with EPROM memory and a UV-erasable windowed CERDIP package for prototype development. Its 4 A/D channels and 13 I/O pins suit sensor-interface and small embedded control applications. For new production designs, prefer the PIC16F716-I/P (pin-compatible, flash-based, in-circuit programmable). Choose PIC16C712/JW if you need 8 A/D channels; choose PIC16C711/JW if you do not need A/D at all. Avoid PIC16C715/JW for new RoHS-compliant designs due to lead in the CERDIP glass.

代替品との比較

パラメータ この製品 PIC16F716-I/P PIC16C712/JW PIC16C711/JW PIC16C71/JW PIC16F716T-I/SS
Package 18-CERDIP window PDIP-18 18-CERDIP window 18-CERDIP window 18-CERDIP window SSOP-20
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Program Memory 3.5KB EPROM (2K x 14) 3.5KB Flash 3.5KB EPROM (2K x 14) 1.75KB EPROM (1K x 14) 1.75KB EPROM (1K x 14) 3.5KB Flash
RAM 128 bytes 128 bytes 128 bytes 68 bytes 36 bytes 128 bytes
Max Clock 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz
A/D Converter 4 ch x 8-bit 4 ch x 8-bit 8 ch x 8-bit None 4 ch x 8-bit 4 ch x 8-bit
I/O Pins 13 13 13 13 13 13 (with SSOP-20 pinout)
Memory Type EPROM (UV window) Flash EPROM (UV window) EPROM (UV window) EPROM (UV window) Flash
Lifecycle Status NRND Active NRND NRND EOL Active

主な差別化要因

  • 4-channel 8-bit A/D converter integration (vs PIC16C711)
  • Windowed CERDIP package for development (vs PIC16F716-I/P)
  • Same JW footprint as PIC16C712 (vs PIC16C712/JW)

設計ノート

The PIC16C715 operates from 4.0V to 5.5V; a regulated 5V supply is recommended. For battery or unregulated inputs, add a 100nF decoupling capacitor close to VDD and a bulk capacitor of at least 10uF on the supply rail. Power-on reset is internal but the /MCLR pin should be pulled high through a 10kohm resistor for reliable cold-start behavior.

Place the external crystal (or ceramic resonator) within 1cm of the OSC1/OSC2 pins to minimize parasitic capacitance. Add the manufacturer's specified load capacitors (typically 15-33pF) on each oscillator pin to ground. Keep oscillator traces short and away from high-current switching nodes to prevent clock corruption.

The PIC16C715/JW is OTP EPROM: in non-windowed CERDIP variants the program memory cannot be erased. The /JW windowed package allows UV erasure only with adequate UV exposure (typically 20-30 minutes under a UV eraser). For development iteration cycles, consider migrating to PIC16F716-I/P which supports in-circuit serial programming and 1000+ erase/write cycles.

Analog inputs AN0-AN3 share pins with PORTA digital I/O. Configure them as analog inputs by clearing the corresponding bits in the CMCON/ADCON1 registers before sampling, or the digital input buffer will inject noise into the A/D conversion. Add a small RC filter (1kohm + 100pF) on each analog input to limit broadband noise pickup before the SAR converter samples.

コンプライアンス情報

RoHS
Non Compliant
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
No
ハロゲンフリー
Unknown
紛争鉱物
Compliant

PIC16C715/JW in windowed CERDIP contains lead (Pb) in the ceramic glass seal and is not RoHS compliant. Microchip product page recommends PIC16F716 for new designs. REACH and halogen status not explicitly stated in distributor data.

データ検証日: 2026-09-18 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

PIC16C715/JW PIC16C715 datasheet Microchip PIC16C715 18-pin CERDIP 8-bit microcontroller 20MHz 3.5KB EPROM PIC16C715 pinout 18-CERDIP PIC16C715 vs PIC16F716 PIC16C715 replacement buy PIC16C715/JW PIC16C715/JW price distributor PIC microcontroller with A/D converter what is NRND status PIC16C715 windowed CERDIP EPROM microcontroller

関連部品&用語

Microchip Technology PIC16C715 PIC16C715/JW PIC16F716-I/P PIC16C712/JW PIC16C711/JW PIC16C71/JW PIC16F716T-I/SS PIC16C family PIC mid-range architecture 8-bit microcontroller RISC Harvard architecture EPROM CERDIP UV-erasable window 18-pin DIP PIC16C7xx A/D converter SAR (Successive Approximation Register) automotive sensor interface industrial process control consumer appliance RoHS NRND (Not Recommended for New Designs) MPASM assembler
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
合計: $0.00 USD
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示