PIC16F689-E/SO - 20MHz 8-Bit Flash MCU, 7KB | Microchip Technology
部品番号: PIC16F689-E/SO ✓ 生産中PIC16F689-E/SO 概要
An 8-bit microcontroller is a complete computing system on a single CMOS chip: a CPU core, program Flash, data RAM, EEPROM for non-volatile parameter storage, oscillators, timers, and I/O ports. Within the Microchip hierarchy the part sits in the PIC16 family, specifically the mid-range PIC16F group, which delivers a 200 ns instruction execution time through a 35 single-word instruction set. That class of device is used when a design needs more capability than an 8-bit PIC but does not justify an ARM Cortex-M core.
Key features of the PIC16F689 include a 20 MHz maximum instruction clock, 7 KB of in-circuit programmable Flash organized as 4K x 14 words, 256 bytes of SRAM, 18 general purpose I/O pins across three ports, on-board EEPROM data memory, and Microchip nanoWatt Technology for low-power sleep and operating currents. The wide 2.0 V to 5.5 V supply operating range allows the same design to run from a 3.3 V regulated rail or a 5 V legacy rail, and the -E/SO ordering code places the device in a 20-pin SOIC package for surface-mount assembly.
Architecturally the device uses the enhanced mid-range PIC16 core, in which program Flash replaces the mask-programmed ROM of older parts, so the same part number can be reprogrammed in circuit and re-used across prototype and production builds. The core executes 35 single-word instructions with a 200 ns cycle time at 20 MHz, and the on-board EEPROM provides a place for calibration values, serial numbers, or configuration data without consuming scarce program Flash.
Typical applications include industrial control and instrumentation modules, appliance and HVAC control boards, LED driver and lighting controllers, motor and stepper control peripherals, battery-operated sensor nodes, and general purpose embedded control in consumer products where 18 I/O pins and EEPROM storage are sufficient.
The key design consideration is supply and decoupling discipline: place the bulk and bypass capacitors directly on the VDD and VSS pins, keep the 20 MHz oscillator loop traces short and away from switching nodes, and confirm the brown-out and watchdog configuration through the configuration words before relying on the Flash program in the field.
This page consolidates manufacturer specifications, package and pin information, drop-in alternatives within the same SOIC-20 footprint, and practical design notes into a single engineering reference for designers who need more than a distributor stock listing.
ドロップイン代替品: PIC16F689-E/SO — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC16F689-E/SO (同一形状・フットプリント) — 相違点: Package, Program Memory (Flash), ADC, Internal Oscillator, Operating Temperature.
PIC16F689-I/SO
✅ ドロップイン価格はお問い合わせください
データシートを見る →PIC16F689T-I/SO
✅ ドロップイン価格はお問い合わせください
データシートを見る →PIC16F687-I/SO
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →PIC16F685-I/SO
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →PIC16F690-I/SO
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →PIC16F677-I/SO
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →PIC16F684-I/SO
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
PIC16F689-E/SO 最大定格&電気的特性
| Device Type | 8-bit Flash Microcontroller (PIC16 mid-range) |
| Maximum Clock Speed | 20 MHz |
| Program Memory (Flash) | 7 KB (4K x 14 words) |
| Data Memory (SRAM) | 256 bytes |
| General Purpose I/O Pins | 18 |
| Instruction Set | 35 single-word instructions |
| Instruction Execution Time | 200 ns |
| 動作電源電圧 | 2.0 V to 5.5 V |
| パッケージ | 20-pin SOIC (SO-20) |
| 実装タイプ | Surface mount |
| Program Memory Type | Flash, in-circuit programmable |
| Data Storage | On-board EEPROM data memory |
| Low Power Feature | nanoWatt Technology |
| Lifecycle Stage | Active |
PIC16F689-E/SO ピン構成
| ピン 1 | RA0/OSC1/C1OUT — Port A bit 0, oscillator input or comparator output |
| ピン 2 | RA1/OSC2/C1IN — Port A bit 1, oscillator output or comparator input |
| ピン 3 | RA2/C2OUT/VREF- — Port A bit 2, comparator output or reference input |
| ピン 4 | RA3/C2IN/SS/INT — Port A bit 3, comparator input, synchronous serial slave select or external interrupt |
| ピン 5 | RC5/T1C1 — Port C bit 5, Timer1 capture or compare |
| ピン 6 | RC4/T1C2 — Port C bit 4, Timer1 capture or compare |
| ピン 7 | RC3/SCK/SCL — Port C bit 3, SPI clock or I2C clock |
| ピン 8 | RC2/SDI/SDA — Port C bit 2, SPI data in or I2C data |
| ピン 9 | RC1/T1OSC — Port C bit 1, Timer1 oscillator output |
| ピン 10 | RC0/T1OSI — Port C bit 0, Timer1 oscillator input |
| ピン 11 | RB7 — Port B bit 7, general purpose I/O |
| ピン 12 | RB6 — Port B bit 6, general purpose I/O, programming clock |
| ピン 13 | RB5 — Port B bit 5, general purpose I/O |
| ピン 14 | RB4 — Port B bit 4, general purpose I/O |
| ピン 15 | RB3/PGM — Port B bit 3, general purpose I/O, low-voltage programming pin |
| ピン 16 | RB2 — Port B bit 2, general purpose I/O |
| ピン 17 | RB1 — Port B bit 1, general purpose I/O |
| ピン 18 | RB0/INT — Port B bit 0, general purpose I/O or external interrupt |
| ピン 19 | VSS — Ground reference |
| ピン 20 | VDD — Positive supply voltage |
主な用途
PIC16F689-E/SO の用途: 6 件s: Industrial Control and Instrumentation, Appliance and HVAC Control Boards, LED Lighting and Display Control, Motor and Stepper Control Peripherals, Battery-Powered Sensor Nodes, Programmable Logic and Educational Platforms.
Industrial Control and Instrumentation
The PIC16F689-E/SO suits compact controller boards that must run from a 3.3 V or 5 V industrial rail while exposing enough I/O for sensors and actuators. Its 18 I/O pins across three ports, 20 MHz mid-range core with a 200 ns instruction cycle, and 7 KB of in-circuit programmable Flash give enough code space for PID loops, debouncing and state machines without moving to a 32-bit core. On-board EEPROM data memory holds calibration offsets and serial numbers so field units can be reconfigured without a programmer. Because the device is a 20-pin SOIC part, it fits dense control boards using surface-mount assembly and a two-layer PCB.
おすすめ
Appliance and HVAC Control Boards
Appliance control panels typically combine a user interface, relay or triac drive outputs, and a temperature or fan sensor input, which maps well onto the PIC16F689-E/SO feature set. Eighteen I/O pins allow direct connection of buttons, indicator LEDs, latches and sensor lines without a separate expander, while the wide 2.0 V to 5.5 V operating range means the same design can be fed from an existing 5 V control rail. The 7 KB Flash store holds the state machine and lookup tables for operating modes, and the EEPROM data memory preserves user preferences across power cycles, which is essential for timers and program schedules.
おすすめ
LED Lighting and Display Control
LED driver and display control boards need deterministic timing and a stable low-power operating point, and the PIC16F689-E/SO provides both through its nanoWatt Technology sleep modes and 20 MHz clocking with 200 ns instruction execution. PWM-capable timer modules can generate dimming and strobe patterns directly, so the firmware does not need a bit-banged output loop. The 7 KB Flash budget comfortably holds multi-channel lookup tables and animation routines, while the 18 I/O pins address driver enable lines, button inputs and fault signalling. The 2.0 V to 5.5 V range also allows the same board to be driven from 5 V logic or a 3.3 V regulated rail.
おすすめ
Motor and Stepper Control Peripherals
Compact stepper and DC motor controller modules benefit from the PIC16F689-E/SO because the 20-pin SOIC footprint leaves board space for driver transistors, while the 18 I/O pins cover step inputs, direction lines, limit switches and an encoder or tachometer channel. The 35-instruction mid-range core executes a position algorithm within microseconds per step, and the 7 KB of Flash accommodates acceleration tables and homing routines. On-board EEPROM data memory stores step counts, current settings and production test data, avoiding repeated reconfiguration after power cycling.
おすすめ
Battery-Powered Sensor Nodes
Battery-operated environmental and IoT sensing nodes benefit from the PIC16F689-E/SO because nanoWatt Technology sleep currents keep quiescent draw low between measurement intervals, and the 2.0 V to 5.5 V range lets the device run directly from a single cell-derived rail without a 5 V boost stage. The 7 KB Flash budget holds the sampling, filtering and radio-packet routines, and EEPROM data memory stores a node identity and last calibration set so the same firmware serves every unit. Eighteen I/O pins let the node multiplex a sensor bus, a status LED and a wake-up or pairing button on a single board.
おすすめ
Programmable Logic and Educational Platforms
Trainer boards, prototyping platforms and small programmable logic controllers often need a device that students or integrators can reprogram without specialist tooling. The PIC16F689-E/SO ships as Flash, so a single part number covers prototype, production and field firmware updates through the in-circuit serial programming interface, which shares RB6 and RB7 with normal port use. The mid-range core with 200 ns instruction execution and a 35-instruction set is simple to teach, and the 18 I/O pins in a 20-pin SOIC footprint leave generous space for expansion headers, displays and breadboard-friendly prototyping layouts.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC16F689-E/SO — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC16F689-I/SO | PIC16F689T-I/SO | PIC16F687-I/SO | PIC16F685-I/SO | PIC16F690-I/SO |
|---|---|---|---|---|---|---|
| Package | SOIC-20 (20-pin SOIC) | SOIC-20 (20-pin SOIC) - same | SOIC-20 (20-pin SOIC) - same | SOIC-20 (20-pin SOIC) - same | SOIC-20 (20-pin SOIC) - same | SOIC-20 (20-pin SOIC) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Core | 8-bit PIC16 mid-range x14 | 8-bit PIC16 mid-range x14 | 8-bit PIC16 mid-range x14 | 8-bit PIC16 mid-range x14 | 8-bit PIC16 mid-range x14 | 8-bit PIC16 mid-range x14 |
| Maximum Clock Speed | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Operating Supply Voltage | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V |
| On-Board EEPROM Data Memory | Yes | Yes | Yes | Yes | Yes | Yes |
| Temperature Grade | Extended commercial (-E) | Industrial (-I) | Extended temperature option | Industrial (-I) | Industrial (-I) | Industrial (-I) |
主な差別化要因
- Same die and pinout as the industrial grade option, so no board change is required (vs PIC16F689-I/SO)
- Fuller peripheral complement than the reduced-member siblings in the same footprint (vs PIC16F687-I/SO)
- Wide 2.0 V to 5.5 V supply range on the same part number (vs PIC16F690-I/SO)
- On-board EEPROM data memory alongside 7 KB of in-circuit programmable Flash (vs PIC16F685-I/SO)
設計ノート
Decouple VDD as close to pin 20 as possible: place a 100 nF ceramic bypass capacitor directly at the supply pin and add a 1 uF to 10 uF bulk capacitor on the same net. Because the PIC16F689-E/SO works down to 2.0 V, verify that the brown-out and power-on-reset settings in the configuration words match the actual rail ramp. Estimated: with a 3.3 V rail and an average supply current of a few milliamperes, the regulator losses and bypass network are negligible, but any sensor or radio load sharing the same rail can pull the supply below the configured brown-out threshold.
Route the oscillator path between the RA0/OSC1 and RA1/OSC2 pins as a short, tight pair on the top copper layer, keeping it well away from switching nodes, relay drivers and inductive traces. At 20 MHz a long or capacitive oscillator loop can destabilise startup and force the firmware into an external clock fallback. Place the bulk ceramic capacitor adjacent to the device rather than at the power entry point, and keep the 20-pin SOIC footprint on a single ground plane so return currents for the switching pins do not cross the analog-capable port A pins.
Do not assume that a same-footprint part is a substitute without reading the pin and code compatibility chart in the manufacturer documentation. The RB0/INT, RB3/PGM, RA3/INT pins and the RC2/RC3 serial pins carry alternate functions, so enabling the wrong peripheral in the configuration words can silently move a signal to a different pin. Also confirm the required VDD level for any programming tool and debugger before committing a board to in-circuit programming, and enable the watchdog timer with a clear software strategy, since an unexpected reset in the field will otherwise lock the firmware out of normal operation.
コンプライアンス情報
The manufacturer lists the device as active. Confirm RoHS, REACH, lead-free and halogen-free status on the Microchip product page and current material compliance documentation for the -E/SO ordering code before release.