Microchip Technology

PIC16F689-E/SO - 20MHz 8-Bit Flash MCU, 7KB | Microchip Technology

MPN: PIC16F689-E/SO ✓ 啟用中
2.0 V to 5.5 V Vdss 20-pin SOIC (SO-20) Package 20 MHz Speed 7 KB (4K x 14 words) Memory
MOQ: 1 |

PIC16F689-E/SO 概覽

The Microchip Technology PIC16F689-E/SO is an 8-bit PIC16 mid-range flash microcontroller rated at up to 20 MHz with 7 KB of program Flash (4K x 14 words), 18 I/O pins, and a 20-pin SOIC surface-mount package. It combines the familiar mid-range x14 architecture with on-board EEPROM data memory and a wide 2.0 V to 5.5 V operating range in a low pin-count package suited to compact embedded control designs.

An 8-bit microcontroller is a complete computing system on a single CMOS chip: a CPU core, program Flash, data RAM, EEPROM for non-volatile parameter storage, oscillators, timers, and I/O ports. Within the Microchip hierarchy the part sits in the PIC16 family, specifically the mid-range PIC16F group, which delivers a 200 ns instruction execution time through a 35 single-word instruction set. That class of device is used when a design needs more capability than an 8-bit PIC but does not justify an ARM Cortex-M core.

Key features of the PIC16F689 include a 20 MHz maximum instruction clock, 7 KB of in-circuit programmable Flash organized as 4K x 14 words, 256 bytes of SRAM, 18 general purpose I/O pins across three ports, on-board EEPROM data memory, and Microchip nanoWatt Technology for low-power sleep and operating currents. The wide 2.0 V to 5.5 V supply operating range allows the same design to run from a 3.3 V regulated rail or a 5 V legacy rail, and the -E/SO ordering code places the device in a 20-pin SOIC package for surface-mount assembly.

Architecturally the device uses the enhanced mid-range PIC16 core, in which program Flash replaces the mask-programmed ROM of older parts, so the same part number can be reprogrammed in circuit and re-used across prototype and production builds. The core executes 35 single-word instructions with a 200 ns cycle time at 20 MHz, and the on-board EEPROM provides a place for calibration values, serial numbers, or configuration data without consuming scarce program Flash.

Typical applications include industrial control and instrumentation modules, appliance and HVAC control boards, LED driver and lighting controllers, motor and stepper control peripherals, battery-operated sensor nodes, and general purpose embedded control in consumer products where 18 I/O pins and EEPROM storage are sufficient.

The key design consideration is supply and decoupling discipline: place the bulk and bypass capacitors directly on the VDD and VSS pins, keep the 20 MHz oscillator loop traces short and away from switching nodes, and confirm the brown-out and watchdog configuration through the configuration words before relying on the Flash program in the field.

This page consolidates manufacturer specifications, package and pin information, drop-in alternatives within the same SOIC-20 footprint, and practical design notes into a single engineering reference for designers who need more than a distributor stock listing.

直接替換替代品,適用於 PIC16F689-E/SO — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: PIC16F689-E/SO (相同外形與佔位) — 差異在於 Package, Program Memory (Flash), ADC, Internal Oscillator, Operating Temperature.

Microchip Technology
Package: SOIC-20 (SO, 0.300 inch body width)
Program Memory (Flash): 3.5 KB
Internal Oscillator: Yes (8 MHz / 32 kHz selectable)
Microchip Technology
Package: 20-pin SOIC (SO)
ADC: On-chip ADC (per datasheet)
Internal Oscillator: 31 kHz to 8 MHz (software-selectable, PLL option)
Microchip Technology
Package: 20-pin SOIC (SOIC-20)
Program Memory (Flash): 3.5 KB (2K x 14 words)
Microchip Technology
Package: 20-pin SOIC (SO), 7.50 mm body width
ADC: 12-channel, 10-bit
Internal Oscillator: 8 MHz (software-selectable, +/- 2% typical)
Microchip Technology
Package: 20-pin SOIC (0.295" / 7.50 mm body)
ADC: 10-bit, up to 11 channels
Microchip Technology
Package: 20-pin SOIC (SO)
Program Memory (Flash): 7 KB (4K x 14)
ADC: 12 channels, 10-bit

PIC16F689-I/SO

✅ 直接替換
Microchip Technology
📦 SOIC-20
PIC 8-bit RISC (mid-range, 14-bit instruction word) · 7 KB (4K x 14 words) · 256 bytes · 256 bytes · 20 MHz (200 ns instruction cycle) · 2.0 V to 5.5 V · 18 · 12-channel, 10-bit

聯絡詢價

查看資料表 →

PIC16F689T-I/SO

✅ 直接替換
Microchip Technology
📦 SOIC-20
PIC16 Mid-Range (x14 architecture) · 8-bit PIC RISC · 7 KB (4K x 14 words) · 256 bytes · 256 bytes · 20 MHz · 200 ns · 2.0 V to 5.5 V

聯絡詢價

查看資料表 →

PIC16F687-I/SO

✅ 直接替換 ⚠️ 規格未經驗證
Microchip Technology
📦 SOIC-20
8-bit Flash-based CMOS Microcontroller · PIC mid-range, x14 14-bit RISC-like core · 20 MHz · 3.5 KB (2K x 14 words) · 128 x 8 · 128 bytes on-board · 18 · 2.0 V to 5.5 V

聯絡詢價

查看資料表 →

PIC16F685-I/SO

✅ 直接替換 ⚠️ 規格未經驗證
Microchip Technology
📦 SOIC-20
PIC16 mid-range 8-bit RISC (14-bit instruction word) · 7 KB (4K x 14) Flash · 256 bytes · 256 bytes · 20 MHz · 200 ns at 20 MHz · 2.0 V to 5.5 V · 18

聯絡詢價

查看資料表 →

PIC16F690-I/SO

✅ 直接替換 ⚠️ 規格未經驗證
Microchip Technology
📦 SOIC-20
8-bit PIC16 mid-range (Harvard, 14-bit instruction word) · 7 KB (4K x 14) · 256 bytes · 256 bytes · 20 MHz (5 MIPS) · 2.0 V to 5.5 V · 18 · 12 channels, 10-bit

聯絡詢價

查看資料表 →

PIC16F677-I/SO

✅ 直接替換 ⚠️ 規格未經驗證
Microchip Technology
📦 SOIC-20
PIC16 Mid-Range 8-bit MCU · 3.5 KB · 128 bytes · 256 bytes · 20 MHz · 2.0 V to 5.5 V · -40 °C to +85 °C (Industrial) · 18

聯絡詢價

查看資料表 →

PIC16F684-I/SO

✅ 直接替換 ⚠️ 規格未經驗證
📦 SOIC-20
same 20-pin SOIC footprint, Flash core and 20 MHz clocking; smaller memory and peripheral complement, pin-compatible

📋 參考替代品(不在目錄中)

PIC16F689-E/SO 最大額定值與電氣特性

Device Type 8-bit Flash Microcontroller (PIC16 mid-range)
Maximum Clock Speed 20 MHz
Program Memory (Flash) 7 KB (4K x 14 words)
Data Memory (SRAM) 256 bytes
General Purpose I/O Pins 18
Instruction Set 35 single-word instructions
Instruction Execution Time 200 ns
工作電源電壓 2.0 V to 5.5 V
封裝 20-pin SOIC (SO-20)
安裝類型 Surface mount
Program Memory Type Flash, in-circuit programmable
Data Storage On-board EEPROM data memory
Low Power Feature nanoWatt Technology
Lifecycle Stage Active

PIC16F689-E/SO 腳位配置

SOIC-20 Package Pinout Diagram SOIC-20W 20-pin, 7.5x12.8mm, P1.27mm, JEDEC MS-013. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 SOIC-20
腳位 1 RA0/OSC1/C1OUT — Port A bit 0, oscillator input or comparator output
腳位 2 RA1/OSC2/C1IN — Port A bit 1, oscillator output or comparator input
腳位 3 RA2/C2OUT/VREF- — Port A bit 2, comparator output or reference input
腳位 4 RA3/C2IN/SS/INT — Port A bit 3, comparator input, synchronous serial slave select or external interrupt
腳位 5 RC5/T1C1 — Port C bit 5, Timer1 capture or compare
腳位 6 RC4/T1C2 — Port C bit 4, Timer1 capture or compare
腳位 7 RC3/SCK/SCL — Port C bit 3, SPI clock or I2C clock
腳位 8 RC2/SDI/SDA — Port C bit 2, SPI data in or I2C data
腳位 9 RC1/T1OSC — Port C bit 1, Timer1 oscillator output
腳位 10 RC0/T1OSI — Port C bit 0, Timer1 oscillator input
腳位 11 RB7 — Port B bit 7, general purpose I/O
腳位 12 RB6 — Port B bit 6, general purpose I/O, programming clock
腳位 13 RB5 — Port B bit 5, general purpose I/O
腳位 14 RB4 — Port B bit 4, general purpose I/O
腳位 15 RB3/PGM — Port B bit 3, general purpose I/O, low-voltage programming pin
腳位 16 RB2 — Port B bit 2, general purpose I/O
腳位 17 RB1 — Port B bit 1, general purpose I/O
腳位 18 RB0/INT — Port B bit 0, general purpose I/O or external interrupt
腳位 19 VSS — Ground reference
腳位 20 VDD — Positive supply voltage

典型應用

PIC16F689-E/SO 適用於 6 應用s: Industrial Control and Instrumentation, Appliance and HVAC Control Boards, LED Lighting and Display Control, Motor and Stepper Control Peripherals, Battery-Powered Sensor Nodes, Programmable Logic and Educational Platforms.

🏭

Industrial Control and Instrumentation

The PIC16F689-E/SO suits compact controller boards that must run from a 3.3 V or 5 V industrial rail while exposing enough I/O for sensors and actuators. Its 18 I/O pins across three ports, 20 MHz mid-range core with a 200 ns instruction cycle, and 7 KB of in-circuit programmable Flash give enough code space for PID loops, debouncing and state machines without moving to a 32-bit core. On-board EEPROM data memory holds calibration offsets and serial numbers so field units can be reconfigured without a programmer. Because the device is a 20-pin SOIC part, it fits dense control boards using surface-mount assembly and a two-layer PCB.

🏠

Appliance and HVAC Control Boards

Appliance control panels typically combine a user interface, relay or triac drive outputs, and a temperature or fan sensor input, which maps well onto the PIC16F689-E/SO feature set. Eighteen I/O pins allow direct connection of buttons, indicator LEDs, latches and sensor lines without a separate expander, while the wide 2.0 V to 5.5 V operating range means the same design can be fed from an existing 5 V control rail. The 7 KB Flash store holds the state machine and lookup tables for operating modes, and the EEPROM data memory preserves user preferences across power cycles, which is essential for timers and program schedules.

💡

LED Lighting and Display Control

LED driver and display control boards need deterministic timing and a stable low-power operating point, and the PIC16F689-E/SO provides both through its nanoWatt Technology sleep modes and 20 MHz clocking with 200 ns instruction execution. PWM-capable timer modules can generate dimming and strobe patterns directly, so the firmware does not need a bit-banged output loop. The 7 KB Flash budget comfortably holds multi-channel lookup tables and animation routines, while the 18 I/O pins address driver enable lines, button inputs and fault signalling. The 2.0 V to 5.5 V range also allows the same board to be driven from 5 V logic or a 3.3 V regulated rail.

⚙️

Motor and Stepper Control Peripherals

Compact stepper and DC motor controller modules benefit from the PIC16F689-E/SO because the 20-pin SOIC footprint leaves board space for driver transistors, while the 18 I/O pins cover step inputs, direction lines, limit switches and an encoder or tachometer channel. The 35-instruction mid-range core executes a position algorithm within microseconds per step, and the 7 KB of Flash accommodates acceleration tables and homing routines. On-board EEPROM data memory stores step counts, current settings and production test data, avoiding repeated reconfiguration after power cycling.

🧩

Battery-Powered Sensor Nodes

Battery-operated environmental and IoT sensing nodes benefit from the PIC16F689-E/SO because nanoWatt Technology sleep currents keep quiescent draw low between measurement intervals, and the 2.0 V to 5.5 V range lets the device run directly from a single cell-derived rail without a 5 V boost stage. The 7 KB Flash budget holds the sampling, filtering and radio-packet routines, and EEPROM data memory stores a node identity and last calibration set so the same firmware serves every unit. Eighteen I/O pins let the node multiplex a sensor bus, a status LED and a wake-up or pairing button on a single board.

🔧

Programmable Logic and Educational Platforms

Trainer boards, prototyping platforms and small programmable logic controllers often need a device that students or integrators can reprogram without specialist tooling. The PIC16F689-E/SO ships as Flash, so a single part number covers prototype, production and field firmware updates through the in-circuit serial programming interface, which shares RB6 and RB7 with normal port use. The mid-range core with 200 ns instruction execution and a 35-instruction set is simple to teach, and the 18 I/O pins in a 20-pin SOIC footprint leave generous space for expansion headers, displays and breadboard-friendly prototyping layouts.

What is the PIC16F689-E/SO microcontroller?
The PIC16F689-E/SO is an 8-bit PIC16 mid-range flash microcontroller from Microchip Technology, running at up to 20 MHz with 7 KB of program Flash, 256 bytes of SRAM and 18 I/O pins in a 20-pin SOIC package. According to the Microchip PIC16F689 product page, the device belongs to the low pin-count 20-pin Flash family with on-board EEPROM Data Memory and a wide 2.0 V to 5.5 V operating voltage range.
What is the maximum clock speed of the PIC16F689-E/SO?
The PIC16F689-E/SO operates at up to 20 MHz. The manufacturer documentation describes the PIC16F631/677/685/687/689/690 family as 20-pin Flash-based 8-bit CMOS microcontrollers with nanoWatt Technology, and the 20 MHz figure is confirmed on the Microchip PIC16F689 product page and in distributor component listings for this part.
How much Flash memory does the PIC16F689-E/SO have?
The PIC16F689-E/SO provides 7 KB of program Flash organized as 4K x 14 words. Because it is a Flash part rather than a mask-ROM device, the same part number can be programmed or reprogrammed in circuit, which allows one BOM line to cover prototype and production units and simplifies field firmware updates.
Where can I download the PIC16F689 datasheet PDF?
The PIC16F689 datasheet PDF is available from the manufacturer product page at microchip.com/en-us/product/PIC16F689, which links the full 20-pin Flash-based 8-bit CMOS microcontroller data sheet covering the PIC16F631/677/685/687/689/690 family. Mirror copies of the same document are also hosted by document repositories, but the manufacturer page is the authoritative source for revisions.
Where can I find the PIC16F689-E/SO pinout?
The PIC16F689-E/SO pinout is given in the pin-description table of the manufacturer data sheet, with a 20-pin SOIC drawing that numbers the pins counter-clockwise from pin 1. Use that table when assigning PCB tracks, since most of the port pins carry alternate functions such as oscillator inputs, comparator outputs, timer inputs, serial clock and data, and programming access on RB0 and RB3.
How do I program the PIC16F689-E/SO?
The PIC16F689-E/SO is programmed through its in-circuit serial programming interface, which shares the RB6 programming clock and RB7 programming data pins with normal I/O after configuration. Microchip supports this part with its standard mid-range PIC16 toolchains, so a PICkit or equivalent programmer and the matching MPLAB X IDE configuration files handle the 4K x 14 word Flash program memory.
What is the difference between PIC16F689-E/SO and PIC16F689-I/SO?
The PIC16F689-E/SO and PIC16F689-I/SO share the same die, the same 20-pin SOIC footprint and the same 20 MHz, 7 KB Flash architecture; the ordering codes differ in temperature grade and commercial terms. The -I/SO variant is the industrial temperature grade option, while the -E/SO version is the extended commercial grade offered in this configuration, so both are pin-to-pin compatible on the same PCB.
PIC16F689-E/SO vs PIC16F687-I/SO - which should I choose?
Choose the PIC16F687-I/SO only if you do not need the full feature complement of the PIC16F689; both are 20-pin SOIC parts with the same mid-range 20 MHz core and 7 KB Flash class of resources. The PIC16F689-E/SO is the fuller-featured member of the family and is the safer default when you need the broader peripheral set or the wider set of family documentation and reference designs.
When should I choose PIC16F689-E/SO over a smaller PIC16 device?
Choose the PIC16F689-E/SO when your design needs more than a 14-pin device provides in I/O count or storage, for example when you must drive multiple outputs, read several sensors, and store calibration data in EEPROM. If your design only needs a couple of I/O lines and no EEPROM, a smaller member of the PIC16 family reduces board area and cost with no functional loss.
Is the PIC16F689-E/SO suitable for industrial control applications?
The PIC16F689-E/SO is suitable for industrial control applications that run from a 3.3 V or 5 V rail in a 20-pin SOIC footprint, because the device operates over a 2.0 V to 5.5 V supply range with 18 I/O pins and on-board EEPROM for parameter retention. For installations with wide ambient temperature swings, select the -I/SO industrial temperature grade rather than this -E/SO configuration.
What is the best drop-in replacement for PIC16F689-E/SO?
The closest drop-in replacements for the PIC16F689-E/SO are the other 20-pin SOIC members of the same family, namely PIC16F689-I/SO, PIC16F687-I/SO and PIC16F685-I/SO, which share the pinout, the 20 MHz clocking and the mid-range Flash core. Because they are the same die with different peripherals or temperature grades, no PCB change is required, although the pin-compatible chart should still be checked before releasing a swap.
What can replace the PIC16F689-E/SO in an existing design?
Replacing the PIC16F689-E/SO with PIC16F689-I/SO, PIC16F687-I/SO, PIC16F685-I/SO or PIC16F690-I/SO keeps the 20-pin SOIC land pattern intact because all of them are 20-pin members of the PIC16F631/677/685/687/689/690 family with the same port assignments. Verify that the replacement offers every peripheral and pin function your firmware uses before committing it to production.
Is the PIC16F689-E/SO the same as PIC16F689-I/SO?
The PIC16F689-E/SO and PIC16F689-I/SO are functionally the same 8-bit 20 MHz microcontroller with 7 KB Flash and 18 I/O pins in a 20-pin SOIC package; the suffix difference reflects grade and packaging qualification rather than architecture. Because the pinout is identical, the two are interchangeable at board level, subject to temperature and qualification requirements of your end product.
What are the key specifications of the PIC16F689-E/SO that engineers should know?
The essential PIC16F689-E/SO specifications are: 8-bit PIC16 mid-range CPU, 20 MHz maximum clock, 7 KB Flash (4K x 14 words), 256 bytes of SRAM, 18 I/O pins across three ports, on-board EEPROM data memory, 2.0 V to 5.5 V supply operation, 35 single-word instructions with a 200 ns execution time, nanoWatt Technology low-power modes, and a 20-pin SOIC surface-mount package.
How many I/O pins and ports does the PIC16F689-E/SO have?
The PIC16F689-E/SO provides 18 general purpose I/O pins distributed across three ports in its 20-pin SOIC package. Several of those pins are multiplexed with oscillator, comparator, timer, serial and programming functions, so the usable pin count for a specific design depends on the peripheral mix you enable; check the pin-description table in the manufacturer data sheet when allocating signals.
How do I get a price and lead time for the PIC16F689-E/SO?
Use the Request a Quote form on this page to obtain current pricing, stock position and lead time for the PIC16F689-E/SO. Quote requests are the fastest route to a confirmed quantity break schedule and delivery date for this Flash microcontroller, since inventory levels and factory lead times move continuously.
Is the PIC16F689-E/SO RoHS compliant and still active?
The PIC16F689-E/SO is listed as an active lifecycle part by the manufacturer, so it continues to be manufactured for new designs. Compliance status such as RoHS, REACH, lead-free and halogen-free declarations should be confirmed on the Microchip product page and the current material compliance documents before a new production release.

工程參考資料,適用於 PIC16F689-E/SO — 比較、設計指引及合規資訊。

選型指南

Choose the PIC16F689-E/SO when your design needs an 8-bit control platform with 18 I/O pins, 7 KB of in-circuit programmable Flash and on-board EEPROM in a 20-pin SOIC footprint, operating from a 3.3 V or 5 V rail. Select PIC16F689-I/SO when ambient temperature demands the industrial grade of the identical die, and PIC16F689T-I/SO when an extended temperature ordering option is required. Move to PIC16F687-I/SO or PIC16F685-I/SO when the analog and timer features of the 689 are not used and a cost reduction matters more than the broader peripheral set. PIC16F690-I/SO is the choice when more analog conversion capability is needed in the same 20-pin footprint. For all of these parts the land pattern is unchanged, so the decision reduces to grade, peripheral fit and cost.

與替代品比較

參數 本產品 PIC16F689-I/SO PIC16F689T-I/SO PIC16F687-I/SO PIC16F685-I/SO PIC16F690-I/SO
Package SOIC-20 (20-pin SOIC) SOIC-20 (20-pin SOIC) - same SOIC-20 (20-pin SOIC) - same SOIC-20 (20-pin SOIC) - same SOIC-20 (20-pin SOIC) - same SOIC-20 (20-pin SOIC) - same
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
CPU Core 8-bit PIC16 mid-range x14 8-bit PIC16 mid-range x14 8-bit PIC16 mid-range x14 8-bit PIC16 mid-range x14 8-bit PIC16 mid-range x14 8-bit PIC16 mid-range x14
Maximum Clock Speed 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz
Operating Supply Voltage 2.0 V to 5.5 V 2.0 V to 5.5 V 2.0 V to 5.5 V 2.0 V to 5.5 V 2.0 V to 5.5 V 2.0 V to 5.5 V
On-Board EEPROM Data Memory Yes Yes Yes Yes Yes Yes
Temperature Grade Extended commercial (-E) Industrial (-I) Extended temperature option Industrial (-I) Industrial (-I) Industrial (-I)

主要差異化特點

  • Same die and pinout as the industrial grade option, so no board change is required (對比PIC16F689-I/SO)
  • Fuller peripheral complement than the reduced-member siblings in the same footprint (對比PIC16F687-I/SO)
  • Wide 2.0 V to 5.5 V supply range on the same part number (對比PIC16F690-I/SO)
  • On-board EEPROM data memory alongside 7 KB of in-circuit programmable Flash (對比PIC16F685-I/SO)

設計說明

Decouple VDD as close to pin 20 as possible: place a 100 nF ceramic bypass capacitor directly at the supply pin and add a 1 uF to 10 uF bulk capacitor on the same net. Because the PIC16F689-E/SO works down to 2.0 V, verify that the brown-out and power-on-reset settings in the configuration words match the actual rail ramp. Estimated: with a 3.3 V rail and an average supply current of a few milliamperes, the regulator losses and bypass network are negligible, but any sensor or radio load sharing the same rail can pull the supply below the configured brown-out threshold.

Route the oscillator path between the RA0/OSC1 and RA1/OSC2 pins as a short, tight pair on the top copper layer, keeping it well away from switching nodes, relay drivers and inductive traces. At 20 MHz a long or capacitive oscillator loop can destabilise startup and force the firmware into an external clock fallback. Place the bulk ceramic capacitor adjacent to the device rather than at the power entry point, and keep the 20-pin SOIC footprint on a single ground plane so return currents for the switching pins do not cross the analog-capable port A pins.

Do not assume that a same-footprint part is a substitute without reading the pin and code compatibility chart in the manufacturer documentation. The RB0/INT, RB3/PGM, RA3/INT pins and the RC2/RC3 serial pins carry alternate functions, so enabling the wrong peripheral in the configuration words can silently move a signal to a different pin. Also confirm the required VDD level for any programming tool and debugger before committing a board to in-circuit programming, and enable the watchdog timer with a clear software strategy, since an unexpected reset in the field will otherwise lock the firmware out of normal operation.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The manufacturer lists the device as active. Confirm RoHS, REACH, lead-free and halogen-free status on the Microchip product page and current material compliance documentation for the -E/SO ordering code before release.

資料驗證日期: 2026-11-15 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

pic16f689 datasheet pic16f689 programming pic16f689 pdf PIC16F689-E/SO pinout PIC16F689-E/SO SOIC-20 footprint PIC16F689-E/SO 20MHz 8-bit flash MCU PIC16F689-E/SO 7KB flash 18 I/O PIC16F689-E/SO drop-in replacement PIC16F689-E/SO vs PIC16F689-I/SO PIC16F689-E/SO vs PIC16F687-I/SO PIC16F689-E/SO price and stock Microchip PIC16F689 microcontroller PIC16F689-E/SO application circuit PIC16F689-E/SO in-circuit programming pins

相關元件與詞彙

Microchip Technology PIC16F689 PIC16F689-E/SO PIC16F689-I/SO PIC16F687-I/SO PIC16F685-I/SO PIC16F690-I/SO 8-bit microcontroller MCU embedded controller PIC16 family mid-range x14 architecture Flash program memory EEPROM data memory data RAM general purpose I/O nanoWatt Technology 20 MHz instruction clock 200 ns instruction execution SOIC-20 surface mount SMD industrial control LED lighting control battery powered sensor node in-circuit serial programming
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情