PIC16F723-E/SP - 8-Bit Flash MCU | Microchip Technology
部品番号: PIC16F723-E/SP ✓ 生産中PIC16F723-E/SP 概要
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, I/O ports, timers, and communication peripherals on one device. PIC16F723 belongs to the PIC16 family hierarchy of 8-bit RISC microcontrollers. Its flash memory allows field reprogramming, while the small 28-pin through-hole package supports straightforward PCB assembly, prototyping, and industrial control systems.
The device provides 35 instructions, an 8-level hardware stack, 7 KB of flash program memory, and a 16 MHz internal oscillator. Peripheral information associated with the PIC16F723 family includes SPI, AUSART, two CCP modules, and an 8-channel 8-bit ADC. These resources allow the MCU to combine digital control, serial communications, timing, and analog measurement without requiring several separate components.
The PIC16F723-E/SP uses a mid-range PIC architecture with a 14-bit program word format. Flash program memory simplifies firmware updates, while the integrated oscillator eliminates the need for an external clock in many designs. The -40°C to +125°C rating supports applications across consumer, industrial, and extended-temperature equipment, although the selected package and qualification requirements should match the end application.
Typical uses include industrial controllers, sensor nodes, compact power supplies, motor-control subsystems, communication equipment, and low-power embedded products. SPI and AUSART support peripheral expansion and serial links, the CCP modules support capture, compare, and PWM functions, and the ADC permits direct sensing of analog voltages. This combination makes the PIC16F723 useful where a small, low-power 8-bit controller is preferred over a higher-complexity processor.
PCB design should preserve the exact 28-pin SPDIP footprint and follow the manufacturer pin-description and decoupling guidance. Provide stable supply bypassing near the device, route oscillator-sensitive signals away from high-current switching nodes, and confirm programming, reset, and I/O levels against the selected operating voltage. The -E/SP suffix identifies the extended-temperature 28-pin SPDIP ordering configuration.
This product page combines the manufacturer family specifications with package and lifecycle information, structured engineering comparisons, application guidance, and verified source links. It helps engineers identify the proper PIC16F723 ordering code and evaluate compatible family alternatives without confusing electrically similar but functionally different devices.
ドロップイン代替品: PIC16F723-E/SP — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC16F723-E/SP (同一形状・フットプリント) — 相違点: Internal Oscillator, Package, Low-Power Technology, ADC, Core Architecture.
PIC16F723A-E/SP
✅ ドロップイン📋 参考代替品(カタログ未掲載)
PIC16F723-I/SP
✅ ドロップイン価格はお問い合わせください
データシートを見る →PIC16F723A-I/SP
✅ ドロップイン価格はお問い合わせください
データシートを見る →PIC16F722A-E/SP
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
PIC16F722A-I/SP
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →PIC16F723-E/SP 最大定格&電気的特性
| Product Type | 8-bit flash-programmable microcontroller |
| CPU Architecture | PIC16 mid-range RISC |
| Program Memory | 7 KB flash |
| Program Word Format | 14 bit |
| Instruction Set | 35 instructions |
| Hardware Stack | 8 levels |
| Internal Oscillator | 16 MHz |
| 最大クロック周波数 | 20 MHz |
| 動作電源電圧 | 2.5 V to 5.5 V |
| 動作温度 | -40°C to +125°C |
| ADC | 8-channel, 8-bit |
| Serial Interfaces | SPI and AUSART |
| Capture Compare PWM Modules | 2 CCP modules |
| パッケージ | 28-pin SPDIP |
| 実装スタイル | Through-hole |
| Program Memory Type | Flash |
| Low-Power Technology | nanoWatt XLP |
| ライフサイクル状態 | In Production |
PIC16F723-E/SP 28-pin spdip ピン配置ガイド
PIC16F723-E/SP (28-pin spdip パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: PIC16F723-E/SP.
詳細は データシート をご参照ください。
主な用途
PIC16F723-E/SP の用途: 6 件s: Industrial Sensor Nodes, Compact Power-Supply Control, Serial Communication Modules, Motor and PWM Control, Data Acquisition and Instrumentation, Low-Power Embedded Products.
Industrial Sensor Nodes
PIC16F723-E/SP fits compact industrial sensor nodes because its 16 MHz internal oscillator, 8-channel 8-bit ADC, and -40°C to +125°C operating range support local sensing without a separate external clock. The 7 KB flash space accommodates a dedicated acquisition, filtering, threshold, and communication routine, while SPI or AUSART can connect a sensor board or remote transceiver. The 28-pin SPDIP package also simplifies prototype assembly and socketed industrial assembly. Designers should use the manufacturer pin-description table for analog-channel assignment, place supply-bypass capacitance close to the device, and verify ADC input limits against the selected 2.5 V to 5.5 V operating range.
おすすめ
Compact Power-Supply Control
PIC16F723-E/SP can supervise a compact power module by using its ADC for feedback-voltage measurement and its PWM-capable CCP resources for control functions. Its 16 MHz internal oscillator provides a practical control rate for digital compensation, sequencing, and fault handling, while 7 KB of flash is sufficient for a focused supervisory state machine. The MCU also allows the same controller to manage temperature, current, or enable signals through discrete I/O. For a power design, keep sensitive analog routing away from switching nodes, follow the recommended bypass arrangement, and treat all timing and reset behavior according to the manufacturer datasheet.
おすすめ
Serial Communication Modules
PIC16F723-E/SP is appropriate for small serial communication modules because it combines AUSART, SPI, flash memory, and a 16 MHz internal oscillator in one 28-pin device. A design can use AUSART for a host or service interface and SPI for a local transceiver, display, or storage element without requiring separate communication controllers. The 8-bit architecture is effective for protocol framing, command handling, checksums, and status reporting rather than high-throughput packet processing. Use buffered signal routing, a defined grounding strategy, and logic-level compatibility checks when connecting external modules. The 28-pin SPDIP footprint is particularly useful during laboratory validation and low-volume controller builds.
おすすめ
Motor and PWM Control
PIC16F723-E/SP can support modest motor, valve, and lighting-control systems through its two CCP modules, 8-bit ADC, and 28-pin I/O budget. The capture function can measure input periods, the compare function can generate timing events, and PWM operation can drive a transistor or power stage from a compact embedded controller. Its 16 MHz internal oscillator supports deterministic peripheral timing, while the ADC can monitor current or position feedback. The design should include suitable driver transistors, flyback protection, and isolation from inductive switching events. Confirm PWM frequency and output polarity in the manufacturer peripheral documentation before assigning load-driving functions to an I/O pin.
おすすめ
Data Acquisition and Instrumentation
PIC16F723-E/SP suits low-channel instrumentation that must combine analog measurement, digital control, and serial reporting in one controller. Its 8-channel, 8-bit ADC handles sensor signals, while SPI and AUSART provide pathways to a display, host computer, or data logger. With 35 instructions and an 8-level hardware stack, the mid-range PIC core is well matched to straightforward acquisition loops, calibration handling, and interrupt-driven service routines. The 28-pin SPDIP package makes it convenient for educational, laboratory, and legacy-system expansion. For accurate measurements, follow the recommended analog grounding and decoupling layout, and calibrate channel gain and offset against the actual sensor and reference arrangement.
おすすめ
Low-Power Embedded Products
PIC16F723-E/SP belongs to Microchip Technology's nanoWatt XLP family and is suitable for compact embedded products requiring low standby consumption and flash-based configuration. It can periodically wake, read a sensor through its ADC, process the result, and communicate through AUSART or SPI. The 16 MHz internal oscillator reduces component count, while 7 KB of flash permits organized low-power state machines and timing control. Actual sleep-mode current and wake-up behavior depend on the configured peripheral state, clock selection, and operating voltage. Use the manufacturer power-measurement conditions when comparing designs, and disable unused peripherals to avoid unnecessary standby consumption.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC16F723-E/SP — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC16F723A-E/SP | PIC16F723-I/SP | PIC16F723A-I/SP | PIC16F722A-E/SP | PIC16F722A-I/SP |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP |
| Temperature Grade | -40°C to +125°C | Extended temperature grade | Industrial temperature grade | Industrial temperature grade | Extended temperature grade | Industrial temperature grade |
主な差別化要因
- Extended-temperature ordering option (vs PIC16F723-I/SP)
- Closest documented family alternative (vs PIC16F723A-E/SP)
- Integration for compact analog control (vs PIC16F722A-E/SP)
設計ノート
Place the required supply-bypass capacitors close to the PIC16F723-E/SP power and ground pins, following the capacitor values and placement shown in the manufacturer datasheet. Route the 28-pin SPDIP footprint to match the standard pin-1 orientation, and keep analog inputs away from PWM outputs, switching-node connections, and high-current return paths. Accurate analog performance depends as much on grounding and decoupling as on the nominal ADC resolution.
Design the supply for the complete 2.5 V to 5.5 V operating range and verify startup, brownout, and I/O behavior at the system voltage extremes. The internal 16 MHz oscillator can simplify clock design, but firmware must account for oscillator accuracy and the timing requirements of the selected communications or control loop. Use the manufacturer configuration and clock-control guidance rather than relying on a nominal frequency alone.
Separate SPI and AUSART routing from noisy analog inputs and switching power stages, and provide a direct, low-impedance ground return for the MCU and its supporting components. If the device controls relays, solenoids, or motor phases, incorporate transistor drive and flyback protection rather than driving inductive loads directly from an I/O pin. Check reset, programming, and exposed test-point accessibility before committing the board layout.
Do not substitute the -I and -E ordering codes without checking environmental requirements; the package can be identical while the temperature grade differs. Likewise, PIC16F723A-family alternatives require firmware and peripheral review even when the 28-pin SPDIP footprint remains unchanged. Use the Microchip pin and code compatibility chart together with the device-specific datasheet before approving a substitution.
コンプライアンス情報
The -SP package is described as lead-free in a distributor specification listing, but formal RoHS, REACH, halogen-free, and conflict-minerals declarations were not identified for this exact ordering code.