Microchip Technology

PIC16F723-E/SP - 8-Bit Flash MCU | Microchip Technology

MPN: PIC16F723-E/SP ✓ Hoạt động
2.5 V to 5.5 V Vdss 28-pin SPDIP Package 20 MHz Speed 7 KB flash Memory
MOQ: 1 |

PIC16F723-E/SP Tóm tắt

Microchip Technology PIC16F723-E/SP is an 8-bit flash-programmable microcontroller with 7 KB of program memory, a 16 MHz internal oscillator, and a 28-pin SPDIP package. The device operates from 2.5 V to 5.5 V and is specified for -40°C to +125°C operation. It combines a compact PIC mid-range core with mixed-signal conversion and serial peripherals for cost-sensitive embedded control.

A microcontroller is a programmable semiconductor that integrates a CPU core, memory, I/O ports, timers, and communication peripherals on one device. PIC16F723 belongs to the PIC16 family hierarchy of 8-bit RISC microcontrollers. Its flash memory allows field reprogramming, while the small 28-pin through-hole package supports straightforward PCB assembly, prototyping, and industrial control systems.

The device provides 35 instructions, an 8-level hardware stack, 7 KB of flash program memory, and a 16 MHz internal oscillator. Peripheral information associated with the PIC16F723 family includes SPI, AUSART, two CCP modules, and an 8-channel 8-bit ADC. These resources allow the MCU to combine digital control, serial communications, timing, and analog measurement without requiring several separate components.

The PIC16F723-E/SP uses a mid-range PIC architecture with a 14-bit program word format. Flash program memory simplifies firmware updates, while the integrated oscillator eliminates the need for an external clock in many designs. The -40°C to +125°C rating supports applications across consumer, industrial, and extended-temperature equipment, although the selected package and qualification requirements should match the end application.

Typical uses include industrial controllers, sensor nodes, compact power supplies, motor-control subsystems, communication equipment, and low-power embedded products. SPI and AUSART support peripheral expansion and serial links, the CCP modules support capture, compare, and PWM functions, and the ADC permits direct sensing of analog voltages. This combination makes the PIC16F723 useful where a small, low-power 8-bit controller is preferred over a higher-complexity processor.

PCB design should preserve the exact 28-pin SPDIP footprint and follow the manufacturer pin-description and decoupling guidance. Provide stable supply bypassing near the device, route oscillator-sensitive signals away from high-current switching nodes, and confirm programming, reset, and I/O levels against the selected operating voltage. The -E/SP suffix identifies the extended-temperature 28-pin SPDIP ordering configuration.

This product page combines the manufacturer family specifications with package and lifecycle information, structured engineering comparisons, application guidance, and verified source links. It helps engineers identify the proper PIC16F723 ordering code and evaluate compatible family alternatives without confusing electrically similar but functionally different devices.

Bộ thay thế dễ dàng lắp đặt cho PIC16F723-E/SP — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC16F723-E/SP (cùng hình factor và footprint) — khác nhau ở Internal Oscillator, Package, Low-Power Technology, ADC, Core Architecture.

Microchip Technology
Internal Oscillator: Yes, 16 MHz factory-calibrated (HFINTOSC)
Package: 28-pin SPDIP (SP), 0.100 inch pitch
ADC: 8-bit, up to 11 channels
Microchip Technology
Internal Oscillator: 16 MHz (factory calibrated, OSCTUNE trimmable)
Package: 28-pin SPDIP (Skinny Plastic DIP), 7.5 mm body width
Low-Power Technology: nanoWatt XLP (sleep current typ. 20 nA)
Microchip Technology
Internal Oscillator: 16 MHz high-precision HFINTOSC, 31 kHz LFINTOSC
Package: 28-pin SPDIP (Skinny Plastic DIP), through-hole
Low-Power Technology: nanoWatt XLP (Sleep current down to ~20 nA typical)

PIC16F723A-E/SP

✅ Drop-In
📦 28-pin SPDIP
PIC16F723A family revision; both are 28-pin SPDIP devices with 7 KB flash and up to 20 MHz operation

📋 Tham chiếu thay thế (không có trong danh mục)

PIC16F723-I/SP

✅ Drop-In
Microchip Technology
📦 28-pin SPDIP
PIC® 8-bit mid-range (14-bit instruction) · 7 KB (4K x 14 words) · 192 bytes · 20 MHz · 2.5 V to 5.5 V · 25 · 11 channels x 10-bit

Liên hệ để biết giá

Xem tài liệu →

PIC16F723A-I/SP

✅ Drop-In
Microchip Technology
📦 28-pin SPDIP
PIC16 enhanced mid-range 8-bit · 7 KB (4K x 14 words) · 192 bytes · 128 bytes · 14-bit, 35 single-word instructions · 20 MHz · 200 ns at 20 MHz · 2.0 V to 5.5 V

Liên hệ để biết giá

Xem tài liệu →

PIC16F722A-E/SP

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 28-pin SPDIP
Related 28-pin family device with lower ADC channel count and a different peripheral mix; core clock and package remain comparable

📋 Tham chiếu thay thế (không có trong danh mục)

PIC16F722A-I/SP

✅ Drop-In ⚠️ Thông số chưa được xác minh
Microchip Technology
📦 28-pin SPDIP
PIC16 Enhanced Mid-Range (14-bit instruction) · 8 bit · 20 MHz · 3.5 KB (2K x 14) · 128 bytes · 0 bytes (none on this device) · 1.8 V to 5.5 V (F variant) · 25 (varies by package)

Liên hệ để biết giá

Xem tài liệu →

PIC16F723-E/SP Tỷ lệ tối đa & tính chất điện

Product Type 8-bit flash-programmable microcontroller
CPU Architecture PIC16 mid-range RISC
Program Memory 7 KB flash
Program Word Format 14 bit
Instruction Set 35 instructions
Hardware Stack 8 levels
Internal Oscillator 16 MHz
Tần số xung maksimum 20 MHz
Điện áp cung cấp hoạt động 2.5 V to 5.5 V
Nhiệt độ hoạt động -40°C to +125°C
ADC 8-channel, 8-bit
Serial Interfaces SPI and AUSART
Capture Compare PWM Modules 2 CCP modules
Hộp 28-pin SPDIP
Kiểu lắp đặt Through-hole
Program Memory Type Flash
Low-Power Technology nanoWatt XLP
Trạng thái vòng đời In Production

Hướng dẫn cấu hình chân PIC16F723-E/SP 28-pin spdip

Cấu hình chân cho PIC16F723-E/SP (28-pin spdip gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 28-pin spdip cho PIC16F723-E/SP

Không có dữ liệu chân cụ thể sẵn có cho PIC16F723-E/SP.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

PIC16F723-E/SP phù hợp cho 6 Áp dụngs: Industrial Sensor Nodes, Compact Power-Supply Control, Serial Communication Modules, Motor and PWM Control, Data Acquisition and Instrumentation, Low-Power Embedded Products.

🏭

Industrial Sensor Nodes

PIC16F723-E/SP fits compact industrial sensor nodes because its 16 MHz internal oscillator, 8-channel 8-bit ADC, and -40°C to +125°C operating range support local sensing without a separate external clock. The 7 KB flash space accommodates a dedicated acquisition, filtering, threshold, and communication routine, while SPI or AUSART can connect a sensor board or remote transceiver. The 28-pin SPDIP package also simplifies prototype assembly and socketed industrial assembly. Designers should use the manufacturer pin-description table for analog-channel assignment, place supply-bypass capacitance close to the device, and verify ADC input limits against the selected 2.5 V to 5.5 V operating range.

⚡

Compact Power-Supply Control

PIC16F723-E/SP can supervise a compact power module by using its ADC for feedback-voltage measurement and its PWM-capable CCP resources for control functions. Its 16 MHz internal oscillator provides a practical control rate for digital compensation, sequencing, and fault handling, while 7 KB of flash is sufficient for a focused supervisory state machine. The MCU also allows the same controller to manage temperature, current, or enable signals through discrete I/O. For a power design, keep sensitive analog routing away from switching nodes, follow the recommended bypass arrangement, and treat all timing and reset behavior according to the manufacturer datasheet.

🌐

Serial Communication Modules

PIC16F723-E/SP is appropriate for small serial communication modules because it combines AUSART, SPI, flash memory, and a 16 MHz internal oscillator in one 28-pin device. A design can use AUSART for a host or service interface and SPI for a local transceiver, display, or storage element without requiring separate communication controllers. The 8-bit architecture is effective for protocol framing, command handling, checksums, and status reporting rather than high-throughput packet processing. Use buffered signal routing, a defined grounding strategy, and logic-level compatibility checks when connecting external modules. The 28-pin SPDIP footprint is particularly useful during laboratory validation and low-volume controller builds.

🔧

Motor and PWM Control

PIC16F723-E/SP can support modest motor, valve, and lighting-control systems through its two CCP modules, 8-bit ADC, and 28-pin I/O budget. The capture function can measure input periods, the compare function can generate timing events, and PWM operation can drive a transistor or power stage from a compact embedded controller. Its 16 MHz internal oscillator supports deterministic peripheral timing, while the ADC can monitor current or position feedback. The design should include suitable driver transistors, flyback protection, and isolation from inductive switching events. Confirm PWM frequency and output polarity in the manufacturer peripheral documentation before assigning load-driving functions to an I/O pin.

📟

Data Acquisition and Instrumentation

PIC16F723-E/SP suits low-channel instrumentation that must combine analog measurement, digital control, and serial reporting in one controller. Its 8-channel, 8-bit ADC handles sensor signals, while SPI and AUSART provide pathways to a display, host computer, or data logger. With 35 instructions and an 8-level hardware stack, the mid-range PIC core is well matched to straightforward acquisition loops, calibration handling, and interrupt-driven service routines. The 28-pin SPDIP package makes it convenient for educational, laboratory, and legacy-system expansion. For accurate measurements, follow the recommended analog grounding and decoupling layout, and calibrate channel gain and offset against the actual sensor and reference arrangement.

🧩

Low-Power Embedded Products

PIC16F723-E/SP belongs to Microchip Technology's nanoWatt XLP family and is suitable for compact embedded products requiring low standby consumption and flash-based configuration. It can periodically wake, read a sensor through its ADC, process the result, and communicate through AUSART or SPI. The 16 MHz internal oscillator reduces component count, while 7 KB of flash permits organized low-power state machines and timing control. Actual sleep-mode current and wake-up behavior depend on the configured peripheral state, clock selection, and operating voltage. Use the manufacturer power-measurement conditions when comparing designs, and disable unused peripherals to avoid unnecessary standby consumption.

Tóm tắt các sản phẩm được đề xuất

PIC16F723A-E/SP Same-package PIC16F723 family controller Được sử dụng trong: Industrial Sensor Nodes, Compact Power-Supply Control, Motor and PWM Control, Data Acquisition and Instrumentation PIC16F723-I/SP Microchip Technology Được sử dụng trong: Industrial Sensor Nodes, Serial Communication Modules, Data Acquisition and Instrumentation PIC16F722A-E/SP Related PIC16 control platform Được sử dụng trong: Compact Power-Supply Control, Motor and PWM Control PIC16F723A-I/SP Microchip Technology Được sử dụng trong: Serial Communication Modules, Low-Power Embedded Products PIC16F722A-I/SP Microchip Technology Được sử dụng trong: Low-Power Embedded Products
What are the key specifications of PIC16F723-E/SP that engineers should know?
The PIC16F723-E/SP is a 28-pin, 8-bit flash microcontroller with 7 KB of program memory, a 16 MHz internal oscillator, and operation from 2.5 V to 5.5 V. According to the Microchip Technology PIC16F723 product page and family documentation, it supports -40°C to +125°C operation and includes SPI, AUSART, two CCP modules, and an 8-channel 8-bit ADC.
Where can I download the PIC16F723 datasheet PDF?
The official PIC16F723 datasheet is accessed through the Microchip Technology PIC16F723 product page at https://www.microchip.com/en-us/product/PIC16F723. Select the Data Sheet link on that page to obtain the manufacturer-controlled document. Use the pin-description and electrical-characteristics tables in that document for PCB assignment and design-limit verification.
What is the operating voltage of PIC16F723-E/SP?
PIC16F723-E/SP operates from 2.5 V to 5.5 V according to the PIC16F723 family specifications. This range supports both low-voltage 3.3 V systems and conventional 5 V designs. Confirm that every connected peripheral and output signal remains within the electrical limits specified for the selected operating voltage in the manufacturer datasheet.
What type of memory and package does PIC16F723-E/SP use?
PIC16F723-E/SP contains 7 KB of flash program memory in a 28-pin SPDIP package. Flash memory permits firmware reprogramming, while the through-hole package supports conventional PCB sockets and lead insertion. The -SP package designation identifies the 28-pin SPDIP configuration associated with this ordering code.
What peripherals are available on PIC16F723?
PIC16F723 includes SPI, AUSART, two CCP modules, and an 8-channel 8-bit ADC. These peripherals support synchronous and asynchronous serial links, timing or PWM functions, and direct analog measurements. The PIC16F723 family information also identifies 35 instructions and an 8-level hardware stack for its mid-range PIC architecture.
Where can I buy PIC16F723-E/SP online?
Use the Request a Quote form on this page to request PIC16F723-E/SP availability, sourcing support, and a current quotation. The form is the appropriate purchasing path for this exact -E/SP ordering code, including its 28-pin SPDIP package and extended-temperature designation.
What is the price of PIC16F723-E/SP?
Current commercial terms for PIC16F723-E/SP are presented through the Request a Quote form on this page. Submit the required quantity, delivery location, and target date to obtain the applicable quotation. This avoids treating a changing market price as a fixed technical attribute of the microcontroller.
What is the lead time for PIC16F723-E/SP?
The current lead time for PIC16F723-E/SP should be confirmed through the Request a Quote form on this page. Include the production quantity, delivery schedule, and packaging requirement so the supplier can confirm allocation and the expected shipment plan for the exact 28-pin SPDIP ordering code.
Is PIC16F723-E/SP in stock?
PIC16F723-E/SP is listed as In Production by Microchip Technology, but current channel inventory should be confirmed through the Request a Quote form on this page. Provide the required quantity and target date when requesting status so the response reflects the exact -E/SP package code and current supply position.
What is the best drop-in replacement for PIC16F723-E/SP?
PIC16F723A-E/SP is the closest documented same-package alternative because it uses the same 28-pin SPDIP format and retains 7 KB of flash memory with a 20 MHz maximum clock. According to Microchip Technology listings, it belongs to the PIC16F723A family, so firmware and peripheral changes must still be reviewed before treating it as a functional substitute.
Can PIC16F723A-E/SP replace PIC16F723-E/SP without PCB changes?
PIC16F723A-E/SP uses the same 28-pin SPDIP package as PIC16F723-E/SP, so its physical footprint does not require a PCB change. Compatibility is strongest when the application stays within the shared 7 KB flash-memory and peripheral capabilities. Review the Microchip pin and code compatibility documentation and recompile the firmware for the replacement before production use.
PIC16F723-E/SP vs PIC16F723A-E/SP: which is better for a new design?
PIC16F723-E/SP is preferable when the original PIC16F723 device and its established firmware behavior are required. PIC16F723A-E/SP provides a newer family member in the same 28-pin SPDIP package, with 7 KB flash and up to 20 MHz operation. Choose the newer family member only after checking device-specific peripherals, configuration words, timing, and qualification requirements.
When should I choose PIC16F723-E/SP over PIC16F723-I/SP?
Choose PIC16F723-E/SP when the equipment must support the extended -40°C to +125°C temperature range. The -E ordering designation targets extended-temperature use, while PIC16F723-I/SP represents the industrial-temperature ordering option. The physical package remains 28-pin SPDIP, but temperature rating and qualification requirements are the decisive selection criteria.
Is PIC16F723-E/SP suitable for industrial sensor and control systems?
PIC16F723-E/SP is suitable for many industrial sensor and control systems because it combines a -40°C to +125°C rating, flash memory, an 8-bit ADC, SPI, AUSART, and two CCP modules. Its 16 MHz internal oscillator supports compact designs without a mandatory external clock. The final suitability depends on transient immunity, EMC, environmental qualification, and system-level safety requirements.
How do I find the PIC16F723-E/SP pinout?
Use the pin-description table in the official Microchip Technology PIC16F723 datasheet and match the 28-pin SPDIP numbering shown on the package drawing. The -SP suffix identifies the 28-pin SPDIP variant, but pin names must still be verified against the family document because related ordering codes can differ in temperature grade or package construction.
What tools are compatible with PIC16F723-E/SP?
PIC16F723-E/SP is programmed and debugged through Microchip-compatible programming and development tools supporting the PIC16F723 family. The exact tool configuration, programming voltage, interface, and debugger selection depend on the development board or programmer used. Consult the Microchip PIC16F723 product resources for supported programmer, debugger, and MPLAB-compatible tool families.

Dữ liệu tham khảo kỹ thuật cho PIC16F723-E/SP — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose PIC16F723-E/SP for an extended-temperature 28-pin SPDIP design that needs 7 KB flash, a 16 MHz internal oscillator, an 8-channel 8-bit ADC, SPI, AUSART, and two CCP modules. Select PIC16F723A-E/SP when the newer family revision is preferred but the same package, memory size, clock rating, and extended-temperature grade are required; recompile and review firmware because device-specific behavior may differ. PIC16F723-I/SP is appropriate when industrial temperature coverage is sufficient. Use PIC16F722A-E/SP or PIC16F722A-I/SP only when the application can operate with fewer ADC channels and the related family peripheral set. All listed alternatives use the same 28-pin SPDIP footprint, but package compatibility alone does not guarantee software, peripheral, qualification, or timing equivalence.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này PIC16F723A-E/SP PIC16F723-I/SP PIC16F723A-I/SP PIC16F722A-E/SP PIC16F722A-I/SP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 28-pin SPDIP 28-pin SPDIP 28-pin SPDIP 28-pin SPDIP 28-pin SPDIP 28-pin SPDIP
Temperature Grade -40°C to +125°C Extended temperature grade Industrial temperature grade Industrial temperature grade Extended temperature grade Industrial temperature grade

Bảo phân biệt quan trọng

  • Extended-temperature ordering option (vsPIC16F723-I/SP)
  • Closest documented family alternative (vsPIC16F723A-E/SP)
  • Integration for compact analog control (vsPIC16F722A-E/SP)

Ghi chú thiết kế

Place the required supply-bypass capacitors close to the PIC16F723-E/SP power and ground pins, following the capacitor values and placement shown in the manufacturer datasheet. Route the 28-pin SPDIP footprint to match the standard pin-1 orientation, and keep analog inputs away from PWM outputs, switching-node connections, and high-current return paths. Accurate analog performance depends as much on grounding and decoupling as on the nominal ADC resolution.

Design the supply for the complete 2.5 V to 5.5 V operating range and verify startup, brownout, and I/O behavior at the system voltage extremes. The internal 16 MHz oscillator can simplify clock design, but firmware must account for oscillator accuracy and the timing requirements of the selected communications or control loop. Use the manufacturer configuration and clock-control guidance rather than relying on a nominal frequency alone.

Separate SPI and AUSART routing from noisy analog inputs and switching power stages, and provide a direct, low-impedance ground return for the MCU and its supporting components. If the device controls relays, solenoids, or motor phases, incorporate transistor drive and flyback protection rather than driving inductive loads directly from an I/O pin. Check reset, programming, and exposed test-point accessibility before committing the board layout.

Do not substitute the -I and -E ordering codes without checking environmental requirements; the package can be identical while the temperature grade differs. Likewise, PIC16F723A-family alternatives require firmware and peripheral review even when the 28-pin SPDIP footprint remains unchanged. Use the Microchip pin and code compatibility chart together with the device-specific datasheet before approving a substitution.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The -SP package is described as lead-free in a distributor specification listing, but formal RoHS, REACH, halogen-free, and conflict-minerals declarations were not identified for this exact ordering code.

Dữ liệu được xác minh vào: 2026-11-19 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

pic16f723 datasheet PIC16F723-E/SP datasheet PIC16F723-E/SP datasheet pdf PIC16F723-E/SP pinout PIC16F723-E/SP equivalent PIC16F723-E/SP replacement PIC16F723-E/SP cross reference PIC16F723-E/SP vs PIC16F723A-E/SP PIC16F723-E/SP price PIC16F723-E/SP stock Microchip Technology PIC16F723-E/SP PIC16F723 28-pin SPDIP pinout PIC16F723 application circuit PIC16F723 programming tools

Các bộ phận và thuật ngữ liên quan

Microchip Technology PIC16F723-E/SP PIC16F723 PIC16F723A-E/SP PIC16F723-I/SP PIC16F723A-I/SP PIC16F722A-E/SP PIC16F722A-I/SP PIC16 8-bit RISC microcontroller flash-programmable microcontroller microcontroller embedded control nanoWatt XLP PIC mid-range core 7 KB flash memory 16 MHz internal oscillator 20 MHz maximum clock 2.5 V to 5.5 V operating voltage 8-bit ADC SPI AUSART CCP 28-pin SPDIP surface-mount alternative
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ