PIC16F913-E/SO - 8-Bit 20MHz Flash MCU | Microchip
部品番号: PIC16F913-E/SO ✓ 生産中PIC16F913-E/SO 概要
PIC microcontrollers are 8-bit CMOS embedded controllers within the broader semiconductor and microcontroller hierarchy. They combine program Flash, data memory, digital I/O, timers, communication peripherals, and low-power operating features on one integrated device. PIC16F913 devices also include an LCD driver and nanoWatt technology, making them suitable for compact control systems that need flexible display support and low standby power.
The PIC16F913 family provides 20 MHz performance, 7 KB of Flash memory, and 25 I/O pins. Its 28-pin SOIC package is a surface-mount option for designs that need more I/O than an 18-pin device while retaining a conventional leaded footprint. The extended-temperature grade supports operation from -40°C to +125°C according to the package listing, making the device relevant to industrial and temperature-varied equipment.
The PIC16F913 is a Flash-based MCU, so application firmware can be programmed and updated repeatedly rather than being fixed at manufacture. The manufacturer identifies the PIC16F913 as in production and lists a PIC16F91X 28/40/44-pin datasheet for device details. The on-chip LCD driver can reduce external display-driver complexity in instrument, meter, keypad, and panel applications.
Typical uses include industrial control panels, compact sensor hubs, instrumentation, temperature controllers, and low-power embedded products. For a new PCB, the 28-pin SOIC footprint and established PIC16F91X pin compatibility chart are important layout references. Program development is supported through Microchip’s MPLAB PICkit 5 in-circuit debugger/programmer environment.
When designing around PIC16F913-E/SO, verify the LCD segment assignments, oscillator configuration, I/O direction, and peripheral multiplexing on the exact 28-pin package drawing. Confirm the required configuration bits and programming interface before committing firmware. This page combines the manufacturer product information, distributor listings, device specifications, and practical replacement guidance.
ドロップイン代替品: PIC16F913-E/SO — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC16F913-E/SO (同一形状・フットプリント) — 相違点: Package, LCD Driver, Operating Temperature Range, Program Memory.
PIC16F913-I/SO
✅ ドロップイン価格はお問い合わせください
データシートを見る →PIC16F913T-I/SO
✅ ドロップイン📋 参考代替品(カタログ未掲載)
PIC16F913T-E/SO
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
PIC16F913-E/SO 最大定格&電気的特性
| Controller Type | 8-bit CMOS microcontroller |
| 最大クロック周波数 | 20 MHz |
| Program Memory | 7 KB Flash, 4K x 14 words |
| I/O Pin Count | 25 I/O |
| パッケージ | 28-pin SOIC |
| Package Width | 7.50 mm |
| 動作温度 | -40°C to +125°C |
| LCD Driver | On-chip LCD driver |
| Low-Power Technology | nanoWatt technology |
| 実装タイプ | Surface mount |
| Manufacturer Status | In production |
PIC16F913-E/SO 7.50 mm ピン配置ガイド
PIC16F913-E/SO (7.50 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: PIC16F913-E/SO.
詳細は データシート をご参照ください。
主な用途
PIC16F913-E/SO の用途: 6 件s: Industrial Instrument Panels, Temperature Controllers, Compact Sensor Hubs, Battery-Powered Monitoring, Metering and Utility Displays, Embedded Control Assemblies.
Industrial Instrument Panels
PIC16F913-E/SO fits industrial instrument panels that combine a segmented LCD with local sensing and control. Its 20 MHz 8-bit core provides useful processing headroom for keypad scanning, menu logic, filtering, and communications, while the on-chip LCD driver reduces the need for a separate display-controller IC. The 25 I/O pins provide connections for sensors, switches, alarm outputs, and status indicators. Its -40°C to +125°C listed operating range is useful for equipment exposed to varying industrial temperatures. In the circuit, place the LCD and application-support components near the corresponding pins, keep sensitive sensor paths away from switching nodes, and verify the segment mapping and pin multiplexing in the manufacturer pin table before PCB release.
おすすめ
Temperature Controllers
The PIC16F913-E/SO is suitable for standalone temperature controllers that must acquire an analog input, drive an LCD, operate a heater or relay, and expose local controls. Its 20 MHz processing capability supports responsive control loops and structured firmware for calibration, hysteresis, alarms, and sensor fault handling. The 25 available I/O pins allow room for a temperature sensor interface, display, buttons, and actuator outputs. The extended-temperature ordering option is particularly relevant where the enclosure may exceed normal commercial conditions. During implementation, confirm the ADC and comparator resource allocation, isolate actuator drive currents from sensitive analog inputs, and validate startup behavior so the heater does not energize before sensor and configuration checks complete.
おすすめ
Compact Sensor Hubs
PIC16F913-E/SO can serve as the local controller in a compact sensor hub that gathers switch, analog, or digital sensor inputs and reports status over a serial interface. The 7 KB Flash program area accommodates protocol handling, event logic, configuration storage, and diagnostic routines, while the 20 MHz clock supports responsive polling. With 25 I/O pins, the device can connect multiple sensors, indicators, and an external interface without immediately requiring a larger package. A practical implementation should assign peripheral functions deterministically, provide pull-up or termination networks according to the selected bus, and separate noisy actuator connections from sensor traces. The manufacturer pin and code compatibility chart should be used whenever the controller footprint is reused with another PIC16F913 family member.
おすすめ
Battery-Powered Monitoring
The PIC16F913-E/SO is appropriate for low-duty-cycle monitoring equipment where an 8-bit MCU must wake periodically, read sensors, update a display, and return to a low-power state. Its nanoWatt technology and 7 KB of Flash support compact embedded firmware without requiring a larger processor, while the LCD driver is useful in portable meters and field-service devices. Low-power design depends on correctly selecting the oscillator and peripheral shutdown modes, disabling unused I/O, and ensuring every pull network does not create a permanent leakage path. Because the available product snippets do not specify detailed current consumption, validate the sleep and active-current budgets experimentally using the final firmware and load conditions.
おすすめ
Metering and Utility Displays
PIC16F913-E/SO is well matched to digital meters and utility interfaces that need a local segmented display, input capture, alarm handling, and a compact controller footprint. The on-chip LCD driver supports display-oriented designs, while the 25 I/O pins leave capacity for keypad inputs, communication lines, and indicator outputs. At 20 MHz, the MCU can service multiple interrupt-driven inputs and maintain stable display updates. For accurate metering, route analog signals directly to the assigned pins, use a quiet ground reference, and keep LCD and switching-node currents from coupling into sensitive traces. Before production, confirm whether the selected family member includes every required ADC, timer, comparator, and communication feature rather than relying only on package equivalence.
おすすめ
Embedded Control Assemblies
PIC16F913-E/SO can act as the main embedded controller in a small appliance, laboratory accessory, or process-control assembly. Its 20 MHz 8-bit architecture is appropriate for deterministic supervisory logic, timer-based sequencing, status indication, and simple communication tasks, while 7 KB of Flash allows organized application code and configuration handling. The 28-pin SOIC package provides a practical surface-mount assembly option with 25 I/O pins for sensors and actuators. Designers should budget I/O based on pin multiplexing, add adequate bypassing at the supply pins, and keep high-current outputs away from precision analog inputs. Validate firmware reset behavior and peripheral initialization so the assembly remains safe during power transitions and firmware restarts.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC16F913-E/SO — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC16F913-I/SO | PIC16F913T-I/SO | PIC16F913T-E/SO |
|---|---|---|---|---|
| Package | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Controller Architecture | 8-bit PIC microcontroller | 8-bit PIC16F913 family | 8-bit PIC16F913 family | 8-bit PIC16F913 family |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Program Memory | 7 KB Flash, 4K x 14 words | 7 KB Flash | 7 KB Flash | 7 KB Flash |
| I/O Pin Count | 25 I/O | 25 I/O | 25 I/O | 25 I/O |
| LCD Driver | On-chip LCD driver | On-chip LCD driver | On-chip LCD driver | On-chip LCD driver |
| Ordering Code | -E/SO | -I/SO | -T-I/SO | -T-E/SO |
主な差別化要因
- Extended-temperature ordering option in a compact 28-pin SOIC (vs PIC16F913-I/SO)
- 25 I/O pins for control and display integration (vs PIC16F913T-I/SO)
- Integrated LCD and nanoWatt features in the same family footprint (vs PIC16F913T-E/SO)
設計ノート
Use the manufacturer’s 28-pin SOIC land pattern and keep the PCB footprint aligned with the actual pin-1 orientation. Reserve the exposed programming and debug test points required by the selected development configuration. Because the PIC16F913 family supports LCD-capable multiplexing, assign the LCD and ordinary I/O functions before routing, and keep short analog traces away from LCD drive, relay, and switching-current paths.
Place the device supply-bypass capacitor close to the VDD and VSS pins and follow the value and placement recommendations in the manufacturer datasheet. Check the required clock, LCD, and peripheral configuration before estimating current demand because the available catalog snippets do not provide detailed active or sleep-current values. Use separate filtering for sensitive sensor rails if the same board also drives relays, displays, or other switching loads.
Do not treat equal package dimensions as sufficient proof of interchangeability. Confirm the pin names, LCD assignments, peripheral multiplexing, configuration bits, Flash organization, and temperature grade for every proposed replacement. PIC16F913 ordering codes can represent meaningful qualification or temperature differences, and firmware should be validated on the actual replacement before production release.
Keep oscillator and decoupling connections short, follow the recommended ground-return arrangement, and avoid routing communication or LCD signals beneath potential noise sources. If the board includes sensors or precision measurement circuitry, use a quiet ground region and isolate the MCU and switching circuitry where practical. Confirm the LCD segment-to-pin mapping against the 28-pin package drawing before finalizing connector and display placement.
コンプライアンス情報
The available product information confirms the manufacturer, package, operating-temperature range, and in-production status but does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because this is an industrial extended-temperature MCU rather than an automotive-qualified ordering option.