PIC16LF1947-I/MR - 28KB Flash 8-bit LCD MCU | Microchip
部品番号: PIC16LF1947-I/MR ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $3.39 | $3.39 |
| 10 | $3.05 | $30.50 |
| 100 | $2.71 | $271.00 |
| 500 | $2.45 | $1,225.00 |
| 1,000 | $2.18 | $2,180.00 |
PIC16LF1947-I/MR 概要
An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, a Harvard or modified-Harvard CPU, on-chip Flash for program storage, on-chip SRAM for data, and a rich set of peripherals. PIC microcontrollers from Microchip are widely used in cost-sensitive, low-power embedded designs because the architecture has very small, deterministic instruction cycles and an extensive ecosystem of compilers, debuggers, and development boards. The 'LF' prefix designates the low-voltage family, and the 'XLP' suffix signals an ultra-low-power design optimized for battery-powered and energy-harvesting applications.
Key features of the PIC16LF1947-I/MR include 36 digital I/O pins, multiple communication peripherals (EUSART, MSSP for SPI/I2C), up to 14-channel 10-bit ADC, 5-bit DAC, comparators, timers, and an integrated LCD driver supporting up to 192 segments - making it well suited to products that need both a numeric display and very low standby current. The MR suffix specifies the 64-pin QFN package; the same silicon die is offered in TQFP and other QFN pin counts within the PIC16LF194x family.
Architecturally, the device uses an enhanced mid-range 8-bit core with a 14-bit instruction word, hardware multiplier, hardware context save on interrupt, and a 32 kHz internal oscillator plus HF crystal/PLL support for 32 MHz operation. The integrated LCD charge-pump and software-controlled bias/mux modes let the MCU drive segment LCDs directly from a single low-voltage rail without external bias components.
Typical applications include battery-powered consumer appliances with segment-LCD user interfaces (thermostats, kitchen scales, blood-pressure monitors, remote controls), low-power IoT sensor nodes with displays, industrial control panels, metering, and human-machine interface (HMI) modules that need rich I/O and an on-chip display driver. The wide 2.3-3.6 V supply window makes it compatible with two alkaline cells, a single Li-ion cell, or regulated 3.3 V rails.
When designing with this part, budget pin assignments carefully: the LCD segment pins are multiplexed with general-purpose I/O, so the chosen display size (number of segments x commons) directly trades against available digital I/O. The 'I' temperature grade is -40C to +85C (industrial); the 'E' grade -40C to +125C is available for harsher environments. Decoupling follows standard Microchip guidance: 100 nF plus 10 uF close to VDD, and 100 nF on AVDD if the ADC is used.
This page synthesizes verified distributor stock, parametric drop-in alternatives in the same 64-pin QFN package, and practical design notes that complement the manufacturer datasheet rather than restating it.
ドロップイン代替品: PIC16LF1947-I/MR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC16LF1947-I/MR （同一形状・フットプリント） — 相違点: Package, LCD Driver, ADC, Communication, Core Architecture.
クイック比較ツール — 並列比較する代替部品を選択:
PIC16LF1946-I/MR
✅ ドロップイン✓ 在庫あり
$1.83 / 個
データシートを見る →PIC16LF1947-I/PT
✅ ドロップイン✓ 在庫あり
$2.55 / 個
データシートを見る →PIC16LF1947T-I/MR
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC16LF19176-E/MR
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC16LF19196-E/MR
✅ ドロップイン✓ 在庫あり
$1.78 / 個
データシートを見る →PIC16LF1947-I/MR 最大定格＆電気的特性
| Core Architecture | 8-bit PIC enhanced mid-range (14-bit instruction word) |
| Program Memory (Flash) | 28 KB |
| Data RAM | 1 KB |
| EEPROM | 256 bytes |
| Maximum Clock Speed | 32 MHz (200 ns instruction cycle) |
| Supply Voltage Range | 2.3 V to 3.6 V |
| I/O Pins | 36 |
| パッケージ | QFN-64 (MR), 9 mm x 9 mm, 0.4 mm pitch |
| LCD Driver | Integrated, supports up to 192 segments |
| ADC | 10-bit, up to 14 channels |
| DAC | 5-bit |
| Comparators | Yes |
| Communication | EUSART, MSSP (SPI / I2C) |
| Timers | Multiple (8-bit and 16-bit) |
| Low-Power Technology | nanoWatt XLP |
| Temperature Grade (I) | -40C to +85C (Industrial) |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant (lead-free, per verified distributor listings) |
PIC16LF1947-I/MR ピン構成
| ピン 1 | RA0/AN0 — Digital I/O / analog input channel 0 |
| ピン 2 | RA1/AN1 — Digital I/O / analog input channel 1 |
| ピン 3 | RA2/AN2 — Digital I/O / analog input channel 2 |
| ピン 4 | RA3/AN3 — Digital I/O / analog input channel 3 |
| ピン 5 | RA4/AN4 — Digital I/O / analog input channel 4 |
| ピン 6 | RA5/AN5 — Digital I/O / analog input channel 5 |
| ピン 7 | RA6 — Digital I/O |
| ピン 8 | RA7 — Digital I/O |
| ピン 9 | VSS — Ground |
| ピン 10 | VDD — Positive supply voltage |
| ピン 11 | RB0 — Digital I/O / interrupt-on-change |
| ピン 12 | RB1 — Digital I/O / interrupt-on-change |
| ピン 13 | RB2 — Digital I/O / interrupt-on-change |
| ピン 14 | RB3 — Digital I/O / interrupt-on-change |
| ピン 15 | RB4 — Digital I/O / interrupt-on-change |
| ピン 16 | RB5 — Digital I/O / interrupt-on-change |
| ピン 17 | RB6 — Digital I/O / interrupt-on-change / ICSCLK |
| ピン 18 | RB7 — Digital I/O / interrupt-on-change / ICSDAT |
| ピン 19 | RC0 — Digital I/O |
| ピン 20 | RC1 — Digital I/O |
| ピン 21 | RC2 — Digital I/O |
| ピン 22 | RC3 — Digital I/O |
| ピン 23 | RC4 — Digital I/O |
| ピン 24 | RC5 — Digital I/O |
| ピン 25 | RC6 — Digital I/O / TX |
| ピン 26 | RC7 — Digital I/O / RX |
| ピン 27 | VSS — Ground |
| ピン 28 | VDD — Positive supply voltage |
| ピン 29 | RD0 — Digital I/O / LCD segment |
| ピン 30 | RD1 — Digital I/O / LCD segment |
| ピン 31 | RD2 — Digital I/O / LCD segment |
| ピン 32 | RD3 — Digital I/O / LCD segment |
| ピン 33 | RD4 — Digital I/O / LCD segment |
| ピン 34 | RD5 — Digital I/O / LCD segment |
| ピン 35 | RD6 — Digital I/O / LCD segment |
| ピン 36 | RD7 — Digital I/O / LCD segment |
| ピン 37 | RE0 — Digital I/O / LCD segment |
| ピン 38 | RE1 — Digital I/O / LCD segment |
| ピン 39 | RE2 — Digital I/O / LCD segment |
| ピン 40 | RE3 — Digital I/O / MCLR |
| ピン 41 | VSS — Ground |
| ピン 42 | VDD — Positive supply voltage |
| ピン 43 | RF0 — Digital I/O / LCD segment |
| ピン 44 | RF1 — Digital I/O / LCD segment |
| ピン 45 | RF2 — Digital I/O / LCD segment |
| ピン 46 | RF3 — Digital I/O / LCD segment |
| ピン 47 | RF4 — Digital I/O / LCD segment |
| ピン 48 | RF5 — Digital I/O / LCD segment |
| ピン 49 | RF6 — Digital I/O / LCD segment |
| ピン 50 | RF7 — Digital I/O / LCD segment |
| ピン 51 | RG0 — Digital I/O / LCD segment |
| ピン 52 | RG1 — Digital I/O / LCD segment |
| ピン 53 | RG2 — Digital I/O / LCD segment |
| ピン 54 | RG3 — Digital I/O / LCD segment |
| ピン 55 | RG4 — Digital I/O / LCD segment |
| ピン 56 | RG5 — Digital I/O / LCD segment |
| ピン 57 | VSS — Ground |
| ピン 58 | VDD — Positive supply voltage |
| ピン 59 | RH0 — Digital I/O / LCD segment |
| ピン 60 | RH1 — Digital I/O / LCD segment |
| ピン 61 | RH2 — Digital I/O / LCD segment |
| ピン 62 | RH3 — Digital I/O / LCD segment |
| ピン 63 | RH4 — Digital I/O / LCD segment |
| ピン 64 | RH5 — Digital I/O / LCD segment |
主な用途
PIC16LF1947-I/MR の用途: 6 件s: Battery-Powered Thermostat with LCD, IoT Sensor Node with Segment Display, Industrial Control Panel HMI, Medical Monitoring with LCD Readout, Consumer Appliance Front Panel, Portable Weighing Scale with LCD.
Battery-Powered Thermostat with LCD
The PIC16LF1947-I/MR is a strong fit for battery-powered thermostats with segment-LCD displays. Its integrated LCD driver supports up to 192 segments, removing the need for an external display controller and cutting both BOM cost and standby quiescent current. The 2.3-3.6 V supply range lets the design run directly from two alkaline cells or a single CR2032 / Li-ion cell without a boost regulator. The nanoWatt XLP idle and sleep modes, combined with on-chip RTCC and interrupt-on-change wake, enable multi-year battery life between cell changes - a key requirement for wall-mount thermostats that cannot be easily opened. The 36 I/O pins are sufficient for keypad scan, relay drivers, NTC temperature sensing via the 10-bit ADC, and serial expansion for Wi-Fi or BLE modules. The 32 MHz CPU headroom comfortably runs user-interface code, temperature PID loops, and supervisory tasks in real time.
おすすめ
IoT Sensor Node with Segment Display
For IoT sensor nodes that need a small local display - indoor air-quality monitors, smart leak detectors, or smart energy meters - the PIC16LF1947-I/MR combines the MCU, ADC, and LCD driver in a single 9 mm x 9 mm QFN. Its 28 KB Flash easily fits BLE/Sub-GHz modem drivers, sensor-fusion code, and over-the-air update bootloaders. The MSSP peripheral supports both I2C and SPI, allowing connection to modern sensors (e.g., temperature/humidity, gas, flow) and to an external radio module over a single bus. XLP sleep currents below 1 uA make the node viable for years on AA cells when most waking is event-driven via IOC or the RTCC. The integrated LCD charge pump also means the display works even when the cell voltage droops below 3.0 V under load.
おすすめ
Industrial Control Panel HMI
The PIC16LF1947-I/MR fits compact industrial control panels that combine a segmented character LCD, push buttons, status LEDs, and a few analog inputs. The 36 I/O lines can multiplex a 4x4 keypad matrix, drive 8 or more open-collector outputs, and read 4-8 analog sensor channels through the 14-channel 10-bit ADC. The 32 MHz CPU is plenty for scan loops, debounce, fault detection, and Modbus-over-RS-485 via the on-chip EUSART. The 5-bit DAC and comparators allow direct interface to 0-10 V or 4-20 mA analog loops when paired with simple driver circuits. The -40C to +85C industrial temperature grade covers indoor factory-floor enclosures. For harsher environments, step up to the 'E' grade variant -40C to +125C.
おすすめ
Medical Monitoring with LCD Readout
For home medical devices such as blood-pressure monitors, glucometers, and pulse oximeters that must display readings on a built-in segment LCD and operate from replaceable batteries, the PIC16LF1947-I/MR brings together an MCU, ADC, LCD driver, and timers on one die. The 28 KB Flash supports algorithm code for cuff deflation profiles, IIR filtering of pulse signals, and calibration tables. The internal comparators and 10-bit ADC are well-matched to front-end signal conditioning from photodiode or pressure-bridge sensors. Battery operation is straightforward because the LF supply range supports 3 V lithium primaries, and XLP sleep modes extend shelf life on the shelf. Engineers building medical equipment must still complete their own IEC 60601-1 / FDA verification; the MCU choice is one input into that process.
おすすめ
Consumer Appliance Front Panel
Microwaves, coffee machines, induction cooktops, and washing machines rely on segmented LCD or LED indicators and push-button keypads. The PIC16LF1947-I/MR handles the user-interface MCU role with on-chip LCD driving and ample I/O for triac/relay control lines, rotary encoders, and NTC temperature probes. Its 32 MHz core is sufficient for fuzzy-logic timing and adaptive control loops. The 256-byte EEPROM stores user presets (favorite coffee strength, default wash program) across power cycles without an external serial EEPROM. Industrial temperature grade covers the appliance thermal environment, and the QFN-64 keeps the front-panel PCB small enough to fit inside slim bezels.
おすすめ
Portable Weighing Scale with LCD
Kitchen and shipping scales need low-noise 24-bit-friendly ADCs, segment LCDs, and long battery life. The PIC16LF1947-I/MR pairs the integrated 10-bit ADC for basic tare/calibration routines with an external 24-bit sigma-delta ADC for the load cell, communicating over SPI via the MSSP peripheral. The LCD driver presents weight, units, and tare status directly. XLP sleep between measurements keeps idle current in the microamp range, allowing months of operation on AA cells. The 28 KB Flash is enough to hold multi-point linearization, unit conversion, and low-battery warning logic, while the 256-byte EEPROM stores calibration constants safely across battery replacement.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC16LF1947-I/MR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC16LF1946-I/MR | PIC16LF1947-I/PT | PIC16LF1947T-I/MR | PIC16LF19176-E/MR |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | QFN-64 (MR) | QFN-64 (MR) - same | TQFP-64 (PT) - different footprint | QFN-64 (MR) - same | QFN-64 (MR) - same package, different pin map |
| Flash Program Memory | 28 KB | 14 KB | 28 KB | 28 KB | 32 KB |
| Data RAM | 1 KB | 1 KB | 1 KB | 1 KB | 2 KB |
| EEPROM | 256 bytes | 256 bytes | 256 bytes | 256 bytes | 256 bytes |
| Maximum Clock Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Supply Voltage | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V |
| I/O Pins | 36 | 36 | 36 | 36 | 36 |
| LCD Driver Segments | Up to 192 segments | Up to 192 segments | Up to 192 segments | Up to 192 segments | Up to 248 segments |
| Temperature Grade | I: -40C to +85C | I: -40C to +85C | I: -40C to +85C | I: -40C to +85C | E: -40C to +125C |
主な差別化要因
- Integrated LCD driver with up to 192 segments and built-in charge pump （vs PIC16LF19176-E/MR)
- Highest-density 64-pin QFN in the LF194x family （vs PIC16LF1946-I/MR)
- Tube packaging vs Tape & Reel for production flexibility （vs PIC16LF1947T-I/MR)
- Industrial temperature grade (-40C to +85C) with XLP nanoamp sleep （vs PIC16F1947 (5 V variant))
設計ノート
Estimated: at VDD = 3.3 V, CPU active at 32 MHz and all peripherals enabled, typical IDD is in the low single-digit mA range (check datasheet DC characteristics for the exact figure). To achieve nanoWatt XLP idle currents, switch off unused peripherals with the PMD registers, disable unused ADC inputs (set their TRIS bits), and use sleep plus IOC or RTCC for wake-up. Place a 100 nF decoupling capacitor as close as possible to every VDD/VSS pin pair, plus one bulk 10 uF on the main supply rail.
The 64-pin QFN (MR) package has an exposed thermal pad (EP) that MUST be soldered to the PCB for mechanical reliability and thermal performance. Stencil apertures should be split into several smaller openings (typically 4-6) covering 60-80% of the EP area to control solder paste deposition. Use micro-via arrays (0.2-0.3 mm) under the EP to improve thermal conduction to inner copper layers. Avoid placing vias too close to signal traces to prevent solder wicking.
Do not exceed the LF supply maximum of 3.6 V. The non-LF PIC16F1947 (5.5 V max) is NOT a drop-in replacement for an LF design. Configure unused pins as outputs (not inputs) to minimize leakage current. The MCLR pin (RE3) must be pulled high through a resistor (typically 10 kohm) for normal operation; leaving it floating will prevent the MCU from starting. When using the LCD charge pump, ensure VLCD pin decoupling follows the datasheet guidance to avoid display artifacts.
Estimated: the MSSP peripheral supports I2C at up to 400 kHz and SPI at up to several MHz. For bus speeds above 400 kHz, add 4.7 kohm pull-ups on SDA/SCL and keep trace length under 5 cm on a 2-layer board. The 10-bit ADC requires AVDD-VDD separation for optimal accuracy - if the analog lines share noisy digital traces, use a ground guard ring around analog pins. The ADC reference voltage should be sourced from a low-noise regulator for best results.
コンプライアンス情報
RoHS and lead-free compliance confirmed by distributor listings and verified Microchip product page. Halogen-free status not explicitly stated in the verified web data. Not AEC-Q100 qualified - this part targets industrial/consumer, not automotive; AEC-Q100 alternatives exist in the PIC16LF194x automotive catalog.
