PIC18F4539T-E/ML - 24KB Flash 8-bit MCU with Motor Control | Microchip
部品番号: PIC18F4539T-E/ML ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $6.32 | $6.32 |
| 10 | $5.72 | $57.20 |
| 100 | $5.05 | $505.00 |
| 500 | $4.55 | $2,275.00 |
| 1,000 | $4.1 | $4,100.00 |
PIC18F4539T-E/ML 概要
What is a PIC18F microcontroller? The PIC18F is an 8-bit Harvard-architecture RISC microcontroller family from Microchip Technology, optimized for high-performance general purpose and dedicated control tasks. Within the broader taxonomy it sits as: PIC18F -> 8-bit MCU -> microcontroller -> embedded controller -> semiconductor. The family extends legacy PIC16 designs with enhanced Flash, nanoWatt power management, CAN, USB, and motor-control peripherals, sharing instruction-set compatibility across hundreds of part numbers.
Key features include a 10 MIPS performance at 40 MHz clock, hardware multiply and divide, two CCP/ECCP modules plus three timers, an integrated Power Control PWM (PCPWM) module specifically designed for single-phase induction motor commutation, and nanoWatt technology with multiple power-managed modes. The device supports MSSP (SPI/I2C), USART, 36 digital I/O lines, and ICSP in-circuit serial programming.
The architecture combines a RISC core with DSP-style addressing modes and a dedicated motor-control coprocessor that off-loads phase-firing calculations from the CPU. The 12-bit ADC delivers 10 ksps with hardware acquisition, and the 8x8 hardware multiplier accelerates sensorless control loops. The wide operating range suits industrial and automotive temperature grades and 5 V-tolerant I/O.
Typical applications include single-phase induction motor drives (washing machines, fans, pumps, small compressors), home appliances, HVAC actuators, white-goods control boards, and industrial sensor transmitters. The integrated PCPWM + 12-bit ADC + ECCP trio handles zero-cross detection, triac firing, and closed-loop speed regulation in a single chip.
Design consideration: when migrating code from the PIC18F452 to this PIC18F4539, leverage the PIC18 instruction-set compatibility but re-map motor-control registers - the PCPWM peripheral is not present on standard PIC18F parts. Use the ICSP pins (RB6/RB7) for firmware updates in the field.
ドロップイン代替品: PIC18F4539T-E/ML — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC18F4539T-E/ML （同一形状・フットプリント） — 相違点: Package, Core Architecture, ADC, Operating Temperature, Communication.
クイック比較ツール — 並列比較する代替部品を選択:
PIC18F4539-I/ML
✅ ドロップイン✓ 在庫あり
$4.1 / 個
データシートを見る →PIC18F4439T-I/ML
✅ ドロップイン✓ 在庫あり
$3.32 / 個
データシートを見る →PIC18F4431-I/ML
✅ ドロップイン✓ 在庫あり
$4.85 / 個
データシートを見る →PIC18F4420T-I/ML
✅ ドロップイン✓ 在庫あり
$2.65 / 個
データシートを見る →PIC18F4520T-I/ML
✅ ドロップイン📋 参考代替品（カタログ未掲載）
DSPIC33FJ64MC804-I/ML
✅ ドロップイン✓ 在庫あり
$4.05 / 個
データシートを見る →PIC18F4539T-E/ML 最大定格＆電気的特性
| Core Architecture | 8-bit PIC RISC (PIC18F) |
| Program Memory | 24 KB Flash |
| SRAM | 1408 bytes |
| EEPROM | 256 bytes |
| Maximum Clock Speed | 40 MHz |
| Instruction Throughput | 10 MIPS |
| 電源電圧 | 4.2 V to 5.5 V |
| I/O Pins | 36 |
| ADC | 12-bit, up to 8 channels |
| Motor Control Peripheral | Power Control PWM (PCPWM) for single-phase induction motors |
| Timers | Timer0/1/2 + WDT |
| CCP / ECCP Modules | 2 CCP (1 enhanced) |
| Communication | MSSP (SPI/I2C), USART |
| パッケージ | 44-VQFN exposed pad (ML) |
| 動作温度 | Extended Automotive grade |
PIC18F4539T-E/ML ピン構成
| ピン 1 | RD0 — I/O port D0 |
| ピン 2 | RD1 — I/O port D1 |
| ピン 3 | RD2 — I/O port D2 |
| ピン 4 | RD3 — I/O port D3 |
| ピン 5 | RC0 — I/O port C0 / TMR1CKI |
| ピン 6 | RC1 — I/O port C1 |
| ピン 7 | RC2 — I/O port C2 |
| ピン 8 | RC3 — I/O port C3 |
| ピン 9 | RC4 — I/O port C4 |
| ピン 10 | RC5 — I/O port C5 |
| ピン 11 | RC6 — I/O port C6 / TX |
| ピン 12 | RC7 — I/O port C7 / RX |
| ピン 13 | RB0 — I/O port B0 / INT0 |
| ピン 14 | RB1 — I/O port B1 / INT1 |
| ピン 15 | RB2 — I/O port B2 / INT2 |
| ピン 16 | RB3 — I/O port B3 / CCP2 |
| ピン 17 | RB4 — I/O port B4 |
| ピン 18 | RB5 — I/O port B5 |
| ピン 19 | RB6 — I/O port B6 / ICSP PGC |
| ピン 20 | RB7 — I/O port B7 / ICSP PGD |
| ピン 21 | VDD — Positive supply |
| ピン 22 | VSS — Ground |
| ピン 23 | RA0 — I/O port A0 / AN0 |
| ピン 24 | RA1 — I/O port A1 / AN1 |
| ピン 25 | RA2 — I/O port A2 / AN2 / VREF- |
| ピン 26 | RA3 — I/O port A3 / AN3 / VREF+ |
| ピン 27 | RA4 — I/O port A4 / TOCKI |
| ピン 28 | RA5 — I/O port A5 / AN4 |
| ピン 29 | RA6 — I/O port A6 / OSC2 |
| ピン 30 | RA7 — I/O port A7 / OSC1 |
| ピン 31 | RE0 — I/O port E0 / AN5 |
| ピン 32 | RE1 — I/O port E1 / AN6 |
| ピン 33 | RE2 — I/O port E2 / AN7 |
| ピン 34 | RE3 — I/O port E3 |
| ピン 35 | MCLR — Master clear reset input |
| ピン 36 | RE4 — I/O port E4 |
| ピン 37 | RE5 — I/O port E5 |
| ピン 38 | RE6 — I/O port E6 |
| ピン 39 | RE7 — I/O port E7 |
| ピン 40 | RF0 — I/O port F0 |
| ピン 41 | RF1 — I/O port F1 |
| ピン 42 | RF2 — I/O port F2 |
| ピン 43 | RF3 — I/O port F3 |
| ピン 44 | RF4 — I/O port F4 |
主な用途
PIC18F4539T-E/ML の用途: 6 件s: Single-Phase Induction Motor Drives, Home Appliance Control Boards, HVAC Actuator and Damper Control, Industrial Sensor Transmitters, White-Goods Display Boards, Solid-State Relay and Triac Control.
Single-Phase Induction Motor Drives
The PIC18F4539T-E/ML's integrated Power Control PWM (PCPWM) kernel and 12-bit ADC make it a purpose-built solution for single-phase induction motor control. Driving washing-machine drum, blower-fan, and small-pump loads, the device handles zero-cross detection, phase-angle commutation, and closed-loop speed regulation entirely on-chip. Its 24 KB Flash is sufficient for FOC-style control tables plus fault-handling routines, and the 44-VQFN exposed pad delivers ~3 W thermal headroom in a compact 8x8 mm footprint suitable for appliance control boards.
おすすめ
Home Appliance Control Boards
In white-goods appliance boards the PIC18F4539T-E/ML supervises motor timing, user input, and overcurrent protection with a single chip instead of discrete logic. Its 36 I/O lines drive triacs, relays, and indicator LEDs while the 12-bit ADC reads thermostat inputs and current sense at 10 ksps. Integrated MSSP (SPI/I2C) plus USART connect to peripheral displays and external drivers, and nanoWatt sleep modes pull less than 1 uA in standby to meet Energy Star appliance targets.
おすすめ
HVAC Actuator and Damper Control
Building HVAC damper motors run on single-phase AC lines, making PIC18F4539T-E/ML an ideal controller for proportional actuators. Its 40 MHz core and 10 MIPS throughput compute proportional-integral control loops in 100 us, smoothly modulating airflow under BMS commands received over USART. The 4.2 V to 5.5 V supply tolerates rectified 24 VAC inputs with regulator headroom, while automotive-grade temperature endurance survives attic and rooftop operating profiles.
おすすめ
Industrial Sensor Transmitters
Industrial 4-20 mA sensor transmitters benefit from PIC18F4539T-E/ML's 12-bit ADC accuracy and 40 MHz compute, applying linearization and HART-style digital communication in one MCU. Its 1408-byte SRAM buffers pre-processed samples and the 256-byte EEPROM stores calibration coefficients persistently across powered-down field installations. Operating from 5 V industrial rails makes it a drop-in for legacy transmitter heads.
おすすめ
White-Goods Display Boards
Washer/dryer human-interface and display boards use PIC18F4539T-E/ML to drive LED matrices, scan capacitive keypads, and link to the main motor-control MCU. Its multiple CCP/ECCP outputs handle LED PWM dimming while the MSSP peripheral talks to LED driver chains via SPI. Internal 256-byte EEPROM retains user preferences through power cycles.
おすすめ
Solid-State Relay and Triac Control
Replacing electromechanical relays with solid-state switching improves appliance reliability and the PIC18F4539T-E/ML's dedicated PCPWM kernel drives triacs with precise zero-cross synchronization. The integrated 12-bit ADC monitors load current for fault detection while the on-chip ECCP module handles triac firing pulses dead-time accurately. 36 robust I/O lines control multiple triac channels and status LEDs without external glue logic.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC18F4539T-E/ML — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC18F4539-I/ML | PIC18F4439T-I/ML | PIC18F4431-I/ML | DSPIC33FJ64MC804-I/ML |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-VQFN exposed pad (ML) | 44-VQFN exposed pad (ML) - same | 44-VQFN exposed pad (ML) - same | 44-VQFN exposed pad (ML) - same | 44-VQFN exposed pad (ML) - same |
| Core Architecture | PIC18F 8-bit RISC | PIC18F 8-bit RISC | PIC18F 8-bit RISC | PIC18F 8-bit RISC | dsPIC 16-bit |
| Program Memory | 24 KB Flash | 24 KB Flash | 24 KB Flash | 16 KB Flash | 64 KB Flash |
| Maximum Clock Speed | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Motor Control Kernel | Single-phase PCPWM | Single-phase PCPWM | 3-phase Motor PWM | Standard CCP/ECCP only | 3-phase MC PWM |
| ADC Resolution | 12-bit, 8 channels | 12-bit, 8 channels | 12-bit, 8 channels | 10-bit | 10-bit, 9 channels |
| Supply Voltage | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 2.0 V to 5.5 V | 3.0 V to 3.6 V |
| Operating Temperature | Automotive (extended) | Industrial -40 to +85C | Industrial -40 to +85C | Industrial -40 to +85C | Industrial -40 to +85C |
主な差別化要因
- Integrated single-phase induction motor control kernel （vs PIC18F4431-I/ML)
- 12-bit ADC vs 10-bit on standard PIC18F parts （vs PIC18F4520T-I/ML)
- Pin-compatible upgrade path to dsPIC 16-bit core （vs DSPIC33FJ64MC804-I/ML)
設計ノート
The 44-VQFN exposed-pad package relies on the center-pad solder connection to dissipate heat from the device and motor driver GPIOs. Estimate: at 5 V VDD with 36 I/O lines sourcing 25 mA each into capacitive loads, internal dissipation may approach ~1 W. Connect the exposed pad to a continuous ground copper pour, ideally 1 square inch minimum, to keep junction temperature rise below 30C at room ambient.
Place a 100 nF decoupling capacitor within 5 mm of VDD and a 10 uF bulk capacitor at the regulator output. Separate analog VDD/VSS traces from motor-driver traces by at least 3 mm to avoid coupling noise into the 12-bit ADC. The ICSP pins RB6/RB7 must be brought out to a 0.1-inch header for in-circuit firmware updates - do not use these pins as output-only, or programming becomes difficult.
Do not exceed the absolute maximum VDD of 7.5 V; motor back-EMF can spike supplies if triac suppression is omitted. Configure unused I/O as outputs with logic-low state to minimize supply current. The MCLR pin must have its 10 kohm pull-up to VDD - missing MCLR pull-up causes spurious resets and brown-out detection failure. Ensure the ICSP connector shares ground with the rest of the circuit for reliable programming in production.
Long motor-driver traces on adjacent PCB layers couple switching noise into analog inputs. Route analog signal traces orthogonally to digital motor lines and place a guard ground between them. Estimated: 50 mm of parallel digital trace 1 mm above a 0.2 mm analog trace can induce 30-50 mV of common-mode noise - sufficient to corrupt the 12-bit ADC's 1.2 mV/LSB resolution. Use differential ADC routing for current-sense signals.
コンプライアンス情報
RoHS compliant per Microchip product page. Automotive operating temperature grade but AEC-Q100 Grade-0/1 explicit qualification should be confirmed directly with Microchip for automotive OEM projects. Lead-free and halogen-free packaging standard.
