Microchip Technology

PIC24EP64GP204-E/MV - 16-Bit 60 MIPS MCU | Microchip Technology

部品番号: PIC24EP64GP204-E/MV ✓ 生産中
3.0 V to 3.6 V Vdss 48-UQFN, 6 mm x 6 mm Package Integrated Speed 64 KB Flash Memory
MOQ: 1 |

PIC24EP64GP204-E/MV 概要

The Microchip Technology PIC24EP64GP204-E/MV is a 16-bit PIC24E general-purpose microcontroller with 64 KB of Flash memory, 8 KB of data RAM, three internal operational amplifiers, and a Peripheral Trigger Generator. It is offered in a 48-UQFN package measuring 6 mm by 6 mm and is identified as an automotive-grade, AEC-Q100 device.

A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one component. The PIC24E family belongs to the broader embedded-controller hierarchy: general-purpose MCU, embedded processor, microcontroller, and semiconductor. These devices combine deterministic peripheral control with analog and communication functions, allowing a compact system to sense, process, and transmit data without requiring several separate analog and interface chips.

The PIC24EP64GP204-E/MV combines a 16-bit architecture with up to 70 MIPS according to the Microchip family description, while the exact automotive ordering code is listed by distributors at 60 MIPS. Its 64 KB Flash supports embedded firmware, and its 8 KB RAM supports working data and buffers. Three integrated operational amplifiers reduce the need for external analog amplifiers in sensing and signal-conditioning circuits. The Peripheral Trigger Generator provides hardware-assisted event triggering for deterministic measurements and control sequences.

Operation from 3.0 V to 3.6 V supports common 3.3 V embedded systems. The family description identifies an operating range extending from -40 °C upward, and exact suffix limits are identified through the ordering information. Integrated communication and timing resources include I2C, SPI, UART, IrDA, LIN, DMA, timers, and a PWM architecture, allowing the MCU to serve as the central controller for connected industrial, automotive, and instrumentation products.

Typical applications include automotive body and environment modules, industrial sensor controllers, condition-monitoring equipment, motor-control interfaces, and compact communications gateways. The three internal operational amplifiers are particularly useful when the design needs local gain, buffering, or current-voltage conversion close to the MCU. The Peripheral Trigger Generator can synchronize ADC measurements and output events, reducing the timing burden on firmware in precision and safety-related control systems.

PCB design should preserve short analog paths between sensor inputs and the internal amplifiers, provide clean power and ground planes, and route high-current outputs away from sensitive analog nodes. Designers should also verify the exposed-pad connection and decoupling requirements in the Microchip pin description before layout release. This page combines device specifications, same-footprint alternatives, application guidance, and practical design considerations to support component selection and PCB implementation.

ドロップイン代替品: PIC24EP64GP204-E/MV — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: PIC24EP64GP204-E/MV (同一形状・フットプリント) — 相違点: ADC, Package, Program Memory (Flash), Operating Temperature Range, CTMU.

Microchip Technology
ADC: 10/12-bit, up to 1.1 Msps
Package: 48-pin UQFN (MV) 6x6 mm with exposed pad
Program Memory (Flash): 128 KB (43K x 24)
Microchip Technology
ADC: 10/12-bit SAR ADC
Package: 48-pin UQFN (6x6 mm) with exposed pad (MV)
Program Memory (Flash): 32 KB (10.7K x 24)
Microchip Technology
ADC: 10/12-bit, multiple channels
Package: 48-pin UQFN (MV) 6x6 mm with exposed pad
Program Memory (Flash): 64 KB (22K x 24)
Microchip Technology
ADC: 12-bit, up to ~1.1 Msps
Package: 48-UQFN (MV) 6x6 mm with exposed pad
Program Memory (Flash): 64 KB (22K x 24)

PIC24EP64GP204-I/MV

✅ ドロップイン
Microchip Technology
📦 48-UQFN (6x6 mm)
PIC24E 16-bit modified Harvard · 70 MIPS at 70 MHz · 24-bit instructions, 16-bit data path, DSP/MAC extensions · 64 KB (22K x 24) · 8 KB · 3.0 V to 3.6 V · -40C to +85C (Industrial, -I suffix) · 48-pin UQFN (MV) 6x6 mm with exposed pad

価格はお問い合わせください

データシートを見る →

PIC24EP64GP204T-E/MV

✅ ドロップイン
📦 48-UQFN (6x6 mm)
Same PIC24EP64GP204-E/MV memory and automotive ordering family; the T ordering code differs by 0 MIPS in core speed but changes the specific ordering or packing configuration.

📋 参考代替品(カタログ未掲載)

PIC24EP128GP204-E/MV

✅ ドロップイン
Microchip Technology
📦 48-UQFN (6x6 mm)
PIC24E 16-bit RISC/DSC · 70 MIPS (at 60 MHz peripheral clock) · 60 MHz (max) · 128 KB (43K x 24) · 16 KB · 3.0 V to 3.6 V · -40C to +125C (Extended, "E") · 48-pin UQFN (MV) 6x6 mm with exposed pad

価格はお問い合わせください

データシートを見る →

PIC24EP64GP204-E/MV 最大定格&電気的特性

CPU Architecture 16-bit PIC24 RISC
Maximum Performance 60 MIPS
Family Maximum Performance 70 MIPS
Program Memory 64 KB Flash
Program Memory Organization 22K x 24 bits
Data RAM 8 KB
動作電源電圧 3.0 V to 3.6 V
Internal Operational Amplifiers 3
Peripheral Trigger Generator Integrated
ADC 12-bit
CTMU Integrated
Communication Interfaces 2 I2C, 2 SPI, 2 UART, IrDA, LIN
DMA Channels 4
Timer Count 5
High-Speed PWM Integrated
パッケージ 48-UQFN, 6 mm x 6 mm
実装タイプ Surface Mount
Automotive Qualification AEC-Q100
Minimum Operating Temperature -40 °C
Automotive Temperature Grade Automotive grade

PIC24EP64GP204-E/MV 48-uqfn, 6 mm x 6 mm ピン配置ガイド

PIC24EP64GP204-E/MV (48-uqfn, 6 mm x 6 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

PIC24EP64GP204-E/MV の 48-uqfn, 6 mm x 6 mm パッケージピン配置図

詳細なピン配置データはありません: PIC24EP64GP204-E/MV.

詳細は データシート をご参照ください。

主な用途

PIC24EP64GP204-E/MV の用途: 6 件s: Automotive Sensor Interface, Industrial Condition Monitoring, Precision Data Acquisition, Motor and Power Control, Connected Sensor Node, Communications Gateway.

🚗

Automotive Sensor Interface

The PIC24EP64GP204-E/MV fits compact automotive sensing modules that must combine local analog conditioning with deterministic control. Its three internal operational amplifiers can buffer or amplify sensor outputs close to the source, reducing sensitivity to PCB noise and avoiding three external amplifier packages. The 60 MIPS PIC24 core provides processing capacity for filtering, diagnostics, and communication, while 64 KB Flash and 8 KB RAM support compact application firmware. The AEC-Q100 identification makes the -E/MV ordering code appropriate for automotive qualification programs, subject to confirmation against the exact operating-temperature grade. In implementation, reserve clean analog routing for sensor inputs, use the Peripheral Trigger Generator for repeatable ADC timing, and verify calibration, fault detection, and external interface requirements in the Microchip datasheet.

🏭

Industrial Condition Monitoring

PIC24EP64GP204-E/MV is suitable for equipment-monitoring modules that acquire sensor data, evaluate thresholds, and report machine condition. The 12-bit ADC, CTMU, and three internal operational amplifiers support analog measurements close to the MCU, while the 60 MIPS core can run digital filters and communication protocols without adding a separate processor. Its 64 KB Flash accommodates event logic, parameter storage, and update routines, and 8 KB RAM is available for sampled-data buffers and protocol state. The Peripheral Trigger Generator can coordinate hardware events and ADC sampling for repeatable measurements. For industrial deployments, isolate noisy motor and relay circuits from the analog section, maintain a solid ground reference, and validate the 3.0 V to 3.6 V supply range under worst-case load transients.

📟

Precision Data Acquisition

The PIC24EP64GP204-E/MV can serve as the controller for precision measurement systems that combine fast sampling, analog conditioning, and local processing. Its three internal operational amplifiers reduce the need for separate gain stages near the ADC input, and the Peripheral Trigger Generator supports hardware-timed acquisition sequences. The 60 MIPS 16-bit processor can implement filtering and calibration while 8 KB RAM provides space for acquisition buffers. Compared with a system using a discrete MCU and separate analog ICs, this integration reduces board area and keeps the analog signal path short. Use low-noise decoupling at the MCU and analog supply pins, route sensor returns independently from digital switching currents, and place the operational-amplifier feedback components close to their pins to minimize parasitic-induced errors.

⚡

Motor and Power Control

PIC24EP64GP204-E/MV fits compact motor-control and actuator modules that require deterministic timing, analog feedback, and multiple communication paths. High-speed PWM, timers, DMA, and a 60 MIPS core allow output switching and control-loop calculations to coexist with system diagnostics. The internal operational amplifiers can condition current-sense or position-feedback signals, reducing external analog overhead, while 2 UART, 2 I2C, 2 SPI, IrDA, and LIN interfaces support local sensors and supervisory controllers. The 64 KB Flash and 8 KB RAM are suitable for compact control algorithms. Place high-current PWM routing away from the analog inputs, use the manufacturer’s recommended ground arrangement, and verify PWM timing, ADC trigger latency, and protection behavior against the system’s electrical transients.

🧩

Connected Sensor Node

PIC24EP64GP204-E/MV works well in connected sensor nodes that need flexible serial connectivity, local analog measurement, and low-power-capable peripheral control. Its two I2C and two SPI channels can connect sensors and memory, while two UART channels support host communications or diagnostics. IrDA and LIN broaden the options for optical or automotive-network links. The 64 KB Flash supports protocol stacks and application logic, and the three internal operational amplifiers can condition inputs before conversion. For a compact IoT-style module, keep radio and switching-regulator connections away from sensitive analog traces, define clean grounding around the CTMU and ADC, and use the Peripheral Trigger Generator for periodic measurements that reduce firmware scheduling jitter.

🌐

Communications Gateway

PIC24EP64GP204-E/MV can act as the protocol-conversion and supervisory controller in a small communications gateway. The MCU combines 2 I2C, 2 SPI, 2 UART, IrDA, and LIN interfaces with 4 DMA channels, allowing data to move among sensors, memory, and external communications hardware without excessive CPU intervention. Its 60 MIPS core is suitable for protocol framing and local routing, while 64 KB Flash and 8 KB RAM support firmware and transmit buffers. The three internal operational amplifiers can support interface conditioning where required. During PCB layout, separate long digital communication routes from analog inputs, use controlled impedance routing for high-speed signals, and confirm buffer depths and bus timing in firmware because sustained traffic can change effective latency and RAM demand.

What are the key specifications of PIC24EP64GP204-E/MV that engineers should know?
The PIC24EP64GP204-E/MV is a 16-bit, 60 MIPS automotive microcontroller with 64 KB of Flash memory, 8 KB of data RAM, and three internal operational amplifiers in a 48-UQFN package. According to the Microchip PIC24EP64GP204 product page, the PIC24E family also provides CTMU, a Peripheral Trigger Generator, high-performance PWM, and extensive communications peripherals. Its 3.0 V to 3.6 V operating range makes it suitable for conventional 3.3 V embedded systems.
Where can I download the PIC24EP64GP204-E/MV datasheet PDF?
The official PIC24EP64GP204-E/MV datasheet is available through the Microchip product page at https://www.microchip.com/en-us/product/PIC24EP64GP204. The device family is described as a 70 MIPS PIC24E general-purpose MCU with enhanced ADC performance, CTMU, internal operational amplifiers, and a Peripheral Trigger Generator. Use the manufacturer datasheet and its pin-description tables for the authoritative package, electrical limits, and peripheral configuration.
Where can I find the PIC24EP64GP204-E/MV pinout?
The PIC24EP64GP204-E/MV pin assignment is documented in the pin-description tables of the Microchip PIC24EP64GP204 datasheet. The device uses a 48-UQFN package measuring 6 mm by 6 mm. Because the exposed pad and analog, power, ground, and I/O assignments are package-sensitive, assign PCB nets directly from the manufacturer pin table rather than relying on a generic 48-pin diagram.
What can replace the PIC24EP64GP204-E/MV on the same PCB?
PIC24EP64GP204-I/MV is the closest same-package option identified for this device, using the same 48-UQFN 6 mm by 6 mm footprint while changing the automotive temperature grade to an industrial-grade ordering option. PIC24EP64GP204T-E/MV is another related 48-pin ordering code, and PIC24EP128GP204-E/MV increases Flash memory from 64 KB to 128 KB. Confirm the exact suffix functions, temperature limits, and pin table before approving a substitution.
Is PIC24EP64GP204-I/MV a drop-in replacement for PIC24EP64GP204-E/MV?
PIC24EP64GP204-I/MV uses the same 48-UQFN 6 mm by 6 mm package and retains the PIC24EP64GP204 memory organization, including 64 KB Flash and 8 KB RAM. Its principal documented distinction is the ordering grade, with the -I/MV version identified at 70 MIPS and the -E/MV version at 60 MIPS. The replacement is appropriate only when the required automotive temperature qualification is not needed and all suffix-specific functions have been checked.
What is the difference between PIC24EP64GP204-E/MV and PIC24EP128GP204-E/MV?
The primary difference is program-memory capacity: PIC24EP64GP204-E/MV contains 64 KB of Flash, while PIC24EP128GP204-E/MV is identified as the 128 KB member of the family. Both use the -E/MV automotive ordering style, and the comparison listing associates them with the same 48-UQFN family. The larger-memory device may offer more firmware headroom, but power consumption, timing, and exact pin availability should be compared before substitution.
When should I choose PIC24EP64GP204-E/MV over PIC24EP64GP204-I/MV?
Choose PIC24EP64GP204-E/MV when the design requires the automotive-grade ordering option identified for this exact suffix. Choose PIC24EP64GP204-I/MV when the design is industrial rather than automotive and does not require the -E grade. Both use the same 48-UQFN 6 mm by 6 mm package and provide 64 KB Flash and 8 KB RAM, so the decision should be driven by qualification, operating-temperature requirements, and firmware expectations.
Is PIC24EP64GP204-E/MV suitable for automotive sensing and control systems?
Yes, PIC24EP64GP204-E/MV is identified as an automotive-grade, AEC-Q100 PIC24EP microcontroller with three internal operational amplifiers and a Peripheral Trigger Generator. Its 60 MIPS performance, 64 KB Flash, 8 KB RAM, and integrated analog resources support compact sensing and control functions. Automotive qualification should be confirmed against the exact order code and the application’s broader functional-safety requirements.
What is the best Microchip equivalent for PIC24EP64GP204-E/MV?
PIC24EP64GP204-I/MV is the best directly identified Microchip same-footprint alternative because it retains the 48-UQFN 6 mm by 6 mm package, 64 KB Flash, and 8 KB RAM while changing the grade from automotive to industrial. PIC24EP128GP204-E/MV offers a related -E/MV option with twice the Flash capacity, while PIC24EP64GP204T-E/MV provides another related ordering code. Each requires suffix-level review before use.
How do the internal op amps and CTMU benefit PIC24EP64GP204-E/MV designs?
The three internal operational amplifiers can provide local gain, buffering, and signal conditioning without requiring three separate amplifier packages, while the CTMU adds capacitive measurement and touch-related capabilities. According to the Microchip family description, these resources are intended for high-end general-purpose applications. Their benefit is reduced board area and shorter analog paths, provided the firmware and layout follow the manufacturer’s recommended configurations.
What power supply does PIC24EP64GP204-E/MV require?
PIC24EP64GP204-E/MV operates from a 3.0 V to 3.6 V supply according to the Microchip PIC24E operating conditions. Place the required bypass capacitors at the device power pins, connect the exposed thermal pad as directed in the package documentation, and keep analog and digital return currents separated until they join at the device ground reference. Verify absolute maximum and decoupling requirements in the manufacturer datasheet before power-up.
How much Flash and RAM does PIC24EP64GP204-E/MV provide?
PIC24EP64GP204-E/MV provides 64 KB of Flash program memory organized as 22K x 24 bits and 8 KB of data RAM. The 64 KB Flash capacity is suitable for embedded control firmware, communications protocols, configuration tables, and application logic, while the 8 KB RAM supports active buffers and working state. Use the linker map and worst-case stack analysis during firmware planning to confirm the available memory margin.
Where to buy PIC24EP64GP204-E/MV online?
Use the Request a Quote form on this XAIPART product page to request PIC24EP64GP204-E/MV availability, minimum order quantity, and current lead time. The exact automotive order code, 48-UQFN package, and quantity requirements should be stated in the request so the quotation matches the intended BOM line. Stock status can change, so confirm allocation and delivery directly through the quotation process.
What is the price of PIC24EP64GP204-E/MV?
Use the Request a Quote form on this XAIPART page for the current unit and volume pricing of PIC24EP64GP204-E/MV. The quote should reflect the exact -E/MV suffix, 48-UQFN package, production quantity, and delivery schedule. This approach avoids presenting a stale catalog figure for a grade-specific automotive MCU whose commercial terms can vary with volume and demand.
What is the lead time and stock status for PIC24EP64GP204-E/MV?
Request the current PIC24EP64GP204-E/MV stock position, lead time, and minimum order quantity through the Request a Quote form on this page. Include your requested quantity, target date, and whether partial shipment is acceptable. The manufacturer’s active family listing indicates product continuity, but allocation for an exact automotive suffix and package should be confirmed when the quotation is issued.

エンジニアリング参考データ: PIC24EP64GP204-E/MV — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose PIC24EP64GP204-E/MV for a 3.3 V embedded design that needs an automotive-grade 16-bit MCU, 64 KB Flash, 8 KB RAM, three internal operational amplifiers, and hardware-assisted triggering. Choose PIC24EP64GP204-I/MV when the same 48-UQFN footprint and memory resources are useful but automotive qualification is unnecessary; its listing identifies 70 MIPS compared with 60 MIPS for the -E/MV device. Choose PIC24EP64GP204T-E/MV when its specific ordering or packing configuration matches the product program while retaining the -E family characteristics. Choose PIC24EP128GP204-E/MV when 128 KB Flash is justified by larger firmware, protocol stacks, dual-bank requirements, or future expansion. In every case, verify the exact suffix temperature grade, pin configuration, exposed-pad connection, and firmware memory map before PCB release.

代替品との比較

パラメータ この製品 PIC24EP64GP204-I/MV PIC24EP64GP204T-E/MV PIC24EP128GP204-E/MV
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 48-UQFN (6x6 mm) 48-UQFN (6x6 mm) 48-UQFN (6x6 mm) 48-UQFN (6x6 mm)
CPU Architecture 16-bit PIC24 RISC 16-bit PIC24 RISC 16-bit PIC24 RISC 16-bit PIC24 RISC
Flash Memory 64 KB 64 KB 64 KB 128 KB
Internal Operational Amplifiers 3 3 3 3
Automotive Qualification AEC-Q100, -E grade Industrial -I grade Automotive -E grade Automotive -E grade
Supply Voltage Range 3.0 V to 3.6 V 3.0 V to 3.6 V 3.0 V to 3.6 V 3.0 V to 3.6 V
Communication Interfaces 2 I2C, 2 SPI, 2 UART, IrDA, LIN 2 I2C, 2 SPI, 2 UART, IrDA, LIN 2 I2C, 2 SPI, 2 UART, IrDA, LIN 2 I2C, 2 SPI, 2 UART, IrDA, LIN

主な差別化要因

  • Automotive-grade ordering option with integrated analog resources (vs PIC24EP64GP204-I/MV)
  • Exact -E/MV family configuration (vs PIC24EP64GP204T-E/MV)
  • Lower Flash footprint for cost- and code-sensitive designs (vs PIC24EP128GP204-E/MV)

設計ノート

Keep the three internal operational-amplifier inputs, feedback components, and CTMU or ADC connections away from PWM, relay, and communication return paths. The UQFN footprint leaves little room for long analog traces, so place input filtering and feedback networks directly beside their assigned pins. Route the analog ground reference to the device ground pins without sharing narrow segments with switching-current returns.

Follow the manufacturer’s decoupling network for the 3.0 V to 3.6 V supply. Place the principal bypass capacitor adjacent to the MCU power pins and connect the exposed pad to the prescribed ground plane. Do not rely on a remote regulator capacitor to supply high-frequency transients; the local capacitor must be positioned so its current loop does not cross the analog return path.

The -E suffix identifies automotive grade, while -I/MV is not the same qualification choice. Before substituting a related ordering code, compare the exact temperature range, pin functions, exposed-pad requirement, and device identification. PIC24EP128GP204-E/MV also changes Flash capacity from 64 KB to 128 KB, so firmware size, bootloader behavior, and memory maps must be reviewed.

Use the Peripheral Trigger Generator or timer resources to define repeatable ADC timing instead of relying on software delays. Synchronize acquisition with PWM only when the timing relationships have been calculated for the selected clock and prescaler settings. Keep clock and high-speed serial routes away from CTMU and op-amp inputs, and maintain continuous ground references beneath signal paths.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The exact -E/MV ordering code is identified as automotive grade and AEC-Q100. No additional RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was stated for this exact suffix.

データ検証日: 2026-11-16 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

PIC24EP64GP204-E/MV datasheet PIC24EP64GP204-E/MV pinout PIC24EP64GP204 datasheet pdf PIC24EP64GP204-E/MV equivalent PIC24EP64GP204-E/MV replacement PIC24EP64GP204-E/MV price PIC24EP64GP204-E/MV stock Microchip PIC24EP64GP204-E/MV PIC24EP64GP204 48-UQFN PIC24EP64GP204 64KB Flash 8KB RAM PIC24EP64GP204 vs PIC24EP128GP204 PIC24EP64GP204-E/MV automotive MCU

関連部品&用語

Microchip Technology PIC24EP64GP204-E/MV PIC24EP64GP204 PIC24EP64GP204-I/MV PIC24EP64GP204T-E/MV PIC24EP128GP204-E/MV PIC24E 16-bit RISC microcontroller general-purpose MCU embedded processor microcontroller semiconductor AEC-Q100 RoHS REACH 48-UQFN QFN family surface-mount package 3.3 V embedded system operational amplifier Peripheral Trigger Generator CTMU 12-bit ADC DMA high-speed PWM
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示