PIC24EP64GP204-E/MV - 16-Bit 60 MIPS MCU | Microchip Technology
N.º de pieza: PIC24EP64GP204-E/MV ✓ ActivoPIC24EP64GP204-E/MV Descripción general
A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one component. The PIC24E family belongs to the broader embedded-controller hierarchy: general-purpose MCU, embedded processor, microcontroller, and semiconductor. These devices combine deterministic peripheral control with analog and communication functions, allowing a compact system to sense, process, and transmit data without requiring several separate analog and interface chips.
The PIC24EP64GP204-E/MV combines a 16-bit architecture with up to 70 MIPS according to the Microchip family description, while the exact automotive ordering code is listed by distributors at 60 MIPS. Its 64 KB Flash supports embedded firmware, and its 8 KB RAM supports working data and buffers. Three integrated operational amplifiers reduce the need for external analog amplifiers in sensing and signal-conditioning circuits. The Peripheral Trigger Generator provides hardware-assisted event triggering for deterministic measurements and control sequences.
Operation from 3.0 V to 3.6 V supports common 3.3 V embedded systems. The family description identifies an operating range extending from -40 °C upward, and exact suffix limits are identified through the ordering information. Integrated communication and timing resources include I2C, SPI, UART, IrDA, LIN, DMA, timers, and a PWM architecture, allowing the MCU to serve as the central controller for connected industrial, automotive, and instrumentation products.
Typical applications include automotive body and environment modules, industrial sensor controllers, condition-monitoring equipment, motor-control interfaces, and compact communications gateways. The three internal operational amplifiers are particularly useful when the design needs local gain, buffering, or current-voltage conversion close to the MCU. The Peripheral Trigger Generator can synchronize ADC measurements and output events, reducing the timing burden on firmware in precision and safety-related control systems.
PCB design should preserve short analog paths between sensor inputs and the internal amplifiers, provide clean power and ground planes, and route high-current outputs away from sensitive analog nodes. Designers should also verify the exposed-pad connection and decoupling requirements in the Microchip pin description before layout release. This page combines device specifications, same-footprint alternatives, application guidance, and practical design considerations to support component selection and PCB implementation.
Alternativas directas para PIC24EP64GP204-E/MV — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con PIC24EP64GP204-E/MV (mismo factor de forma y huella) — difiere en ADC, Package, Program Memory (Flash), Operating Temperature Range, CTMU.
PIC24EP64GP204-I/MV
✅ Sustitución directaConsulte el precio
Ver hoja de datos →PIC24EP64GP204T-E/MV
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
PIC24EP128GP204-E/MV
✅ Sustitución directaConsulte el precio
Ver hoja de datos →PIC24EP64GP204-E/MV Valores máximos y características eléctricas
| CPU Architecture | 16-bit PIC24 RISC |
| Maximum Performance | 60 MIPS |
| Family Maximum Performance | 70 MIPS |
| Program Memory | 64 KB Flash |
| Program Memory Organization | 22K x 24 bits |
| Data RAM | 8 KB |
| Tensión de alimentación de funcionamiento | 3.0 V to 3.6 V |
| Internal Operational Amplifiers | 3 |
| Peripheral Trigger Generator | Integrated |
| ADC | 12-bit |
| CTMU | Integrated |
| Communication Interfaces | 2 I2C, 2 SPI, 2 UART, IrDA, LIN |
| DMA Channels | 4 |
| Timer Count | 5 |
| High-Speed PWM | Integrated |
| Encapsulado | 48-UQFN, 6 mm x 6 mm |
| Tipo de montaje | Surface Mount |
| Automotive Qualification | AEC-Q100 |
| Minimum Operating Temperature | -40 °C |
| Automotive Temperature Grade | Automotive grade |
Guía de configuración de pines de PIC24EP64GP204-E/MV 48-uqfn, 6 mm x 6 mm
Configuración de pines para PIC24EP64GP204-E/MV (encapsulado 48-uqfn, 6 mm x 6 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para PIC24EP64GP204-E/MV.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
PIC24EP64GP204-E/MV es adecuado para 6 aplicacións: Automotive Sensor Interface, Industrial Condition Monitoring, Precision Data Acquisition, Motor and Power Control, Connected Sensor Node, Communications Gateway.
Automotive Sensor Interface
The PIC24EP64GP204-E/MV fits compact automotive sensing modules that must combine local analog conditioning with deterministic control. Its three internal operational amplifiers can buffer or amplify sensor outputs close to the source, reducing sensitivity to PCB noise and avoiding three external amplifier packages. The 60 MIPS PIC24 core provides processing capacity for filtering, diagnostics, and communication, while 64 KB Flash and 8 KB RAM support compact application firmware. The AEC-Q100 identification makes the -E/MV ordering code appropriate for automotive qualification programs, subject to confirmation against the exact operating-temperature grade. In implementation, reserve clean analog routing for sensor inputs, use the Peripheral Trigger Generator for repeatable ADC timing, and verify calibration, fault detection, and external interface requirements in the Microchip datasheet.
Recomendado
Industrial Condition Monitoring
PIC24EP64GP204-E/MV is suitable for equipment-monitoring modules that acquire sensor data, evaluate thresholds, and report machine condition. The 12-bit ADC, CTMU, and three internal operational amplifiers support analog measurements close to the MCU, while the 60 MIPS core can run digital filters and communication protocols without adding a separate processor. Its 64 KB Flash accommodates event logic, parameter storage, and update routines, and 8 KB RAM is available for sampled-data buffers and protocol state. The Peripheral Trigger Generator can coordinate hardware events and ADC sampling for repeatable measurements. For industrial deployments, isolate noisy motor and relay circuits from the analog section, maintain a solid ground reference, and validate the 3.0 V to 3.6 V supply range under worst-case load transients.
Recomendado
Precision Data Acquisition
The PIC24EP64GP204-E/MV can serve as the controller for precision measurement systems that combine fast sampling, analog conditioning, and local processing. Its three internal operational amplifiers reduce the need for separate gain stages near the ADC input, and the Peripheral Trigger Generator supports hardware-timed acquisition sequences. The 60 MIPS 16-bit processor can implement filtering and calibration while 8 KB RAM provides space for acquisition buffers. Compared with a system using a discrete MCU and separate analog ICs, this integration reduces board area and keeps the analog signal path short. Use low-noise decoupling at the MCU and analog supply pins, route sensor returns independently from digital switching currents, and place the operational-amplifier feedback components close to their pins to minimize parasitic-induced errors.
Recomendado
Motor and Power Control
PIC24EP64GP204-E/MV fits compact motor-control and actuator modules that require deterministic timing, analog feedback, and multiple communication paths. High-speed PWM, timers, DMA, and a 60 MIPS core allow output switching and control-loop calculations to coexist with system diagnostics. The internal operational amplifiers can condition current-sense or position-feedback signals, reducing external analog overhead, while 2 UART, 2 I2C, 2 SPI, IrDA, and LIN interfaces support local sensors and supervisory controllers. The 64 KB Flash and 8 KB RAM are suitable for compact control algorithms. Place high-current PWM routing away from the analog inputs, use the manufacturer’s recommended ground arrangement, and verify PWM timing, ADC trigger latency, and protection behavior against the system’s electrical transients.
Recomendado
Connected Sensor Node
PIC24EP64GP204-E/MV works well in connected sensor nodes that need flexible serial connectivity, local analog measurement, and low-power-capable peripheral control. Its two I2C and two SPI channels can connect sensors and memory, while two UART channels support host communications or diagnostics. IrDA and LIN broaden the options for optical or automotive-network links. The 64 KB Flash supports protocol stacks and application logic, and the three internal operational amplifiers can condition inputs before conversion. For a compact IoT-style module, keep radio and switching-regulator connections away from sensitive analog traces, define clean grounding around the CTMU and ADC, and use the Peripheral Trigger Generator for periodic measurements that reduce firmware scheduling jitter.
Recomendado
Communications Gateway
PIC24EP64GP204-E/MV can act as the protocol-conversion and supervisory controller in a small communications gateway. The MCU combines 2 I2C, 2 SPI, 2 UART, IrDA, and LIN interfaces with 4 DMA channels, allowing data to move among sensors, memory, and external communications hardware without excessive CPU intervention. Its 60 MIPS core is suitable for protocol framing and local routing, while 64 KB Flash and 8 KB RAM support firmware and transmit buffers. The three internal operational amplifiers can support interface conditioning where required. During PCB layout, separate long digital communication routes from analog inputs, use controlled impedance routing for high-speed signals, and confirm buffer depths and bus timing in firmware because sustained traffic can change effective latency and RAM demand.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para PIC24EP64GP204-E/MV — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | PIC24EP64GP204-I/MV | PIC24EP64GP204T-E/MV | PIC24EP128GP204-E/MV |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 48-UQFN (6x6 mm) | 48-UQFN (6x6 mm) | 48-UQFN (6x6 mm) | 48-UQFN (6x6 mm) |
| CPU Architecture | 16-bit PIC24 RISC | 16-bit PIC24 RISC | 16-bit PIC24 RISC | 16-bit PIC24 RISC |
| Flash Memory | 64 KB | 64 KB | 64 KB | 128 KB |
| Internal Operational Amplifiers | 3 | 3 | 3 | 3 |
| Automotive Qualification | AEC-Q100, -E grade | Industrial -I grade | Automotive -E grade | Automotive -E grade |
| Supply Voltage Range | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Communication Interfaces | 2 I2C, 2 SPI, 2 UART, IrDA, LIN | 2 I2C, 2 SPI, 2 UART, IrDA, LIN | 2 I2C, 2 SPI, 2 UART, IrDA, LIN | 2 I2C, 2 SPI, 2 UART, IrDA, LIN |
Diferenciadores clave
- Automotive-grade ordering option with integrated analog resources (frente a PIC24EP64GP204-I/MV)
- Exact -E/MV family configuration (frente a PIC24EP64GP204T-E/MV)
- Lower Flash footprint for cost- and code-sensitive designs (frente a PIC24EP128GP204-E/MV)
Notas de diseño
Keep the three internal operational-amplifier inputs, feedback components, and CTMU or ADC connections away from PWM, relay, and communication return paths. The UQFN footprint leaves little room for long analog traces, so place input filtering and feedback networks directly beside their assigned pins. Route the analog ground reference to the device ground pins without sharing narrow segments with switching-current returns.
Follow the manufacturer’s decoupling network for the 3.0 V to 3.6 V supply. Place the principal bypass capacitor adjacent to the MCU power pins and connect the exposed pad to the prescribed ground plane. Do not rely on a remote regulator capacitor to supply high-frequency transients; the local capacitor must be positioned so its current loop does not cross the analog return path.
The -E suffix identifies automotive grade, while -I/MV is not the same qualification choice. Before substituting a related ordering code, compare the exact temperature range, pin functions, exposed-pad requirement, and device identification. PIC24EP128GP204-E/MV also changes Flash capacity from 64 KB to 128 KB, so firmware size, bootloader behavior, and memory maps must be reviewed.
Use the Peripheral Trigger Generator or timer resources to define repeatable ADC timing instead of relying on software delays. Synchronize acquisition with PWM only when the timing relationships have been calculated for the selected clock and prescaler settings. Keep clock and high-speed serial routes away from CTMU and op-amp inputs, and maintain continuous ground references beneath signal paths.
Información de cumplimiento
The exact -E/MV ordering code is identified as automotive grade and AEC-Q100. No additional RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was stated for this exact suffix.