PIC24FJ64GL305-E/PT - 16-Bit Low-Power LCD MCU | Microchip
部品番号: PIC24FJ64GL305-E/PT ✓ 生産中PIC24FJ64GL305-E/PT 概要
A low-power microcontroller is a semiconductor controller optimized to execute embedded control tasks while minimizing energy use during active, idle, and sleep operation. The PIC24FJ64GL305 belongs to the PIC24FJ family and combines a 16-bit CPU, core-independent peripherals, and LCD-oriented resources. Its extended-temperature ordering designation, -E, differentiates it from the industrial-temperature version for designs that require operation across a wider environmental range.
The principal feature is an integrated segmented LCD controller supporting as many as 256 segments with 8 common and 32 segment outputs. Core-independent animation can provide alternating dual-display operation, blinking, and blanking without continuous CPU intervention. This division of work can reduce software activity in display-intensive products. A charge-pump feature supports contrast management in battery-powered applications where the LCD supply must remain controlled as the primary battery voltage changes.
The MCU combines 64 KB of ECC flash with 8 KB of SRAM and provides 16 MIPS at its 32 MHz maximum clock. ECC flash supports dependable code and data storage, while the low-power architecture targets applications that spend substantial time waiting for user input, sensor events, or timed system activity. Core-independent peripherals allow background tasks such as display animation and timer-driven control to continue without burdening the main instruction stream.
Typical applications include household meters, utility and water-monitoring equipment, industrial panel meters, portable medical instruments, point-of-sale terminals, battery-powered sensors, and compact consumer devices with segmented displays. The integrated LCD controller reduces the component count required for common-segment displays, while autonomous animation improves visibility during measurement or status updates. The 48-pin TQFP package also provides a practical choice for boards assembled through conventional surface-mount production.
Designers should verify the exact LCD segment and common assignments, pin multiplexing, decoupling requirements, programming configuration, and external crystal or timing component recommendations in the manufacturer datasheet. LCD bias voltage, glass characteristics, common drive timing, and charge-pump configuration should be validated with the intended display module rather than assumed from generic segmented-LCD practice.
This product page combines the manufacturer's device description with pin-compatible family candidates, technical comparison data, application guidance, and practical design notes. It also identifies where a schematic or firmware decision depends on the exact peripheral map, temperature grade, package, and LCD glass.
ドロップイン代替品: PIC24FJ64GL305-E/PT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC24FJ64GL305-E/PT (同一形状・フットプリント) — 相違点: LCD Charge Pump, Package, Sleep Current.
PIC24FJ64GL305T-I/PT
✅ ドロップイン価格はお問い合わせください
データシートを見る →PIC24FJ64GL303-E/PT
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
PIC24FJ64GL304-E/PT
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
PIC24FJ64GL301-E/PT
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
PIC24FJ64GL302-E/PT
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
PIC24FJ64GL305-E/PT 最大定格&電気的特性
| Product Type | 16-bit low-power flash microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Maximum Instruction Throughput | 16 MIPS |
| Flash Memory | 64 KB |
| Program Memory Type | ECC flash |
| RAM | 8 KB |
| CPU Architecture | 16-bit |
| LCD Controller | Integrated segmented LCD controller |
| Maximum LCD Segments | 256 segments |
| LCD Common Outputs | 8 commons |
| LCD Segment Outputs | 32 segments |
| Core-Independent LCD Animation | Alternating dual display, blinking, and blanking |
| LCD Charge Pump | Supported for contrast management |
| パッケージ | 48-pin TQFP (7 mm x 7 mm) |
| 実装タイプ | Surface mount |
| Low-Power Architecture | eXtreme Low Power (XLP) |
| Sleep Current | Down to a few hundred nA |
| Temperature Grade | Extended temperature |
PIC24FJ64GL305-E/PT 48-pin tqfp (7 mm x 7 mm) ピン配置ガイド
PIC24FJ64GL305-E/PT (48-pin tqfp (7 mm x 7 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: PIC24FJ64GL305-E/PT.
詳細は データシート をご参照ください。
主な用途
PIC24FJ64GL305-E/PT の用途: 6 件s: Battery-Powered Utility Meters, Industrial Panel Meters, Portable Medical Instruments, Point-of-Sale and Payment Terminals, Battery-Powered Sensor Displays, Consumer Appliance Control Panels.
Battery-Powered Utility Meters
The PIC24FJ64GL305-E/PT fits utility meters that combine a segmented numeric display with long periods of low activity. Its 32 MHz, 16-bit MCU can process measurements while the XLP architecture reduces sleep current to a few hundred nA, supporting longer operation between battery replacements. The integrated LCD controller handles up to 256 segments with 8 common and 32 segment outputs, eliminating a separate display driver for compatible glass. Autonomous animation provides alternating display, blinking, and blanking without continuous CPU updates, which can reduce software activity and improve status visibility. The charge pump also supports controlled contrast in battery-operated equipment.
おすすめ
Industrial Panel Meters
The PIC24FJ64GL305-E/PT is suitable for industrial panel meters requiring a local segmented display and embedded measurement control. The 16-bit core operates at up to 32 MHz and 16 MIPS, providing enough performance for signal conditioning, compensation, and interface tasks while the LCD controller directly handles the display. Up to 256 segments and 8 commons support informative multi-digit instruments, while autonomous blinking or blanking can draw attention to alarm conditions. The extended-temperature ordering option supports assemblies operating beyond the standard industrial temperature grade.
おすすめ
Portable Medical Instruments
The PIC24FJ64GL305-E/PT can support portable medical instruments that present measurements on a compact segmented LCD while maintaining a low standby-power budget. The device combines 64 KB of ECC flash for firmware and data with 8 KB of RAM for working state, and its 16-bit CPU executes at up to 32 MHz for sensor acquisition and control. Sleep current down to a few hundred nA is valuable between measurements, while core-independent LCD animation can preserve a clear display status without continuous main-loop activity.
おすすめ
Point-of-Sale and Payment Terminals
The PIC24FJ64GL305-E/PT fits compact point-of-sale and payment terminals that use segmented customer-facing or operator displays alongside embedded control functions. Its 64 KB ECC flash provides room for application firmware, and the 32 MHz CPU supports communication and user-interface tasks. The LCD controller's 256-segment capability, eight common outputs, and autonomous animation provide flexible status presentation. XLP operation can reduce energy use in intermittent kiosks and portable payment equipment, although actual battery performance depends on the display refresh strategy and peripheral activity.
おすすめ
Battery-Powered Sensor Displays
The PIC24FJ64GL305-E/PT is well suited to remote sensor products that must show local measurements without transmitting data continuously. The MCU can wake to process a sensor event, update the segmented display, and return to a low-power sleep state. The built-in LCD resources reduce the need for a separate display controller, while core-independent animation supports blink and blank patterns with reduced firmware intervention. The 48-pin TQFP package provides a practical balance of I/O availability and board area for compact industrial or environmental monitoring instruments.
おすすめ
Consumer Appliance Control Panels
The PIC24FJ64GL305-E/PT can control compact appliances or embedded equipment with a segmented status display. Its 16-bit architecture handles control logic at up to 16 MIPS, while 64 KB of ECC flash supports structured firmware and 8 KB of RAM accommodates display buffers and application state. The integrated LCD animation functions improve feedback for timers, operating states, and alerts without requiring a graphical display interface. Designers should verify the exact LCD glass pin mapping and configure the charge pump for the intended supply and contrast range.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC24FJ64GL305-E/PT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC24FJ64GL305T-I/PT | PIC24FJ64GL303-E/PT | PIC24FJ64GL304-E/PT | PIC24FJ64GL301-E/PT | PIC24FJ64GL302-E/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) |
| CPU Architecture | 16-bit | 16-bit | 16-bit | 16-bit | 16-bit | 16-bit |
| LCD Support | Integrated segmented LCD controller with autonomous animation | Integrated segmented LCD controller with autonomous animation | Segmented LCD controller; exact mapping not stated | Segmented LCD controller; exact mapping not stated | Segmented LCD controller; exact mapping not stated | Segmented LCD controller; exact mapping not stated |
| Temperature Ordering Grade | Extended temperature | Industrial temperature | Extended-temperature ordering code | Extended-temperature ordering code | Extended-temperature ordering code | Extended-temperature ordering code |
主な差別化要因
- Extended-temperature ordering option (vs PIC24FJ64GL305T-I/PT)
- 32 MHz and 16 MIPS processing capability (vs PIC24FJ64GL303-E/PT)
- 64 KB ECC flash with 8 KB RAM (vs PIC24FJ64GL304-E/PT)
- Autonomous segmented-LCD animation (vs PIC24FJ64GL301-E/PT)
設計ノート
Assign the PCB from the exact 48-pin TQFP pin table rather than from a generic PIC24 pin header. The LCD segment and common functions, programming interface, oscillator pins, power rails, and ground returns can require specific multiplexing choices. Preserve the package orientation and pin-1 marking during assembly, and route sensitive display and clock signals away from noisy switching nodes. The package drawing and pin-description tables in the manufacturer datasheet should govern land-pattern and escape-routing decisions.
Power the MCU and LCD interface according to the manufacturer voltage limits and decoupling recommendations. Place the required bypass capacitors close to their associated supply pins, provide a low-impedance return path, and keep analog, display, and digital return-current behavior predictable. Do not assume the LCD charge pump can compensate for an unsuitable power source or excessive ripple; verify startup, display bias, and charge-pump behavior across the intended battery-voltage range.
Design firmware around the XLP sleep capability rather than treating low sleep current as the complete system-power budget. Measure the complete wake, acquisition, LCD-update, and return-to-sleep cycle, including sensor loads and display drive current. Autonomous blinking, blanking, and alternating-display animation can reduce processor activity, but their timing and LCD duty cycle still determine energy use. Validate the configured sleep current at the actual board temperature and supply voltage.
Do not substitute the industrial-temperature PIC24FJ64GL305T-I/PT for the extended-temperature PIC24FJ64GL305-E/PT without reviewing the environmental specification. The two packages are physically compatible, but the operating-temperature requirement can make the substitution invalid. Likewise, related GL301, GL302, GL303, and GL304 devices must be checked for LCD channel assignments, peripheral multiplexing, memory differences, and firmware requirements before being treated as drop-in replacements.
コンプライアンス情報
No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was identified for the exact ordering code. The -E suffix denotes the extended-temperature ordering configuration, not AEC-Q100 qualification.