PIC24FJ64GL305-E/PT - 16-Bit Low-Power LCD MCU | Microchip
料号: PIC24FJ64GL305-E/PT ✓ 量产中PIC24FJ64GL305-E/PT 概述
A low-power microcontroller is a semiconductor controller optimized to execute embedded control tasks while minimizing energy use during active, idle, and sleep operation. The PIC24FJ64GL305 belongs to the PIC24FJ family and combines a 16-bit CPU, core-independent peripherals, and LCD-oriented resources. Its extended-temperature ordering designation, -E, differentiates it from the industrial-temperature version for designs that require operation across a wider environmental range.
The principal feature is an integrated segmented LCD controller supporting as many as 256 segments with 8 common and 32 segment outputs. Core-independent animation can provide alternating dual-display operation, blinking, and blanking without continuous CPU intervention. This division of work can reduce software activity in display-intensive products. A charge-pump feature supports contrast management in battery-powered applications where the LCD supply must remain controlled as the primary battery voltage changes.
The MCU combines 64 KB of ECC flash with 8 KB of SRAM and provides 16 MIPS at its 32 MHz maximum clock. ECC flash supports dependable code and data storage, while the low-power architecture targets applications that spend substantial time waiting for user input, sensor events, or timed system activity. Core-independent peripherals allow background tasks such as display animation and timer-driven control to continue without burdening the main instruction stream.
Typical applications include household meters, utility and water-monitoring equipment, industrial panel meters, portable medical instruments, point-of-sale terminals, battery-powered sensors, and compact consumer devices with segmented displays. The integrated LCD controller reduces the component count required for common-segment displays, while autonomous animation improves visibility during measurement or status updates. The 48-pin TQFP package also provides a practical choice for boards assembled through conventional surface-mount production.
Designers should verify the exact LCD segment and common assignments, pin multiplexing, decoupling requirements, programming configuration, and external crystal or timing component recommendations in the manufacturer datasheet. LCD bias voltage, glass characteristics, common drive timing, and charge-pump configuration should be validated with the intended display module rather than assumed from generic segmented-LCD practice.
This product page combines the manufacturer's device description with pin-compatible family candidates, technical comparison data, application guidance, and practical design notes. It also identifies where a schematic or firmware decision depends on the exact peripheral map, temperature grade, package, and LCD glass.
直接替换替代料: PIC24FJ64GL305-E/PT ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: PIC24FJ64GL305-E/PT (相同外形与封装尺寸) ——差异在于 LCD Charge Pump, Package, Sleep Current.
PIC24FJ64GL305T-I/PT
✅ 直接替换联系询价
查看数据手册 →PIC24FJ64GL303-E/PT
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
PIC24FJ64GL304-E/PT
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
PIC24FJ64GL301-E/PT
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
PIC24FJ64GL302-E/PT
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
PIC24FJ64GL305-E/PT 最大额定值与电气特性
| Product Type | 16-bit low-power flash microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Maximum Instruction Throughput | 16 MIPS |
| Flash Memory | 64 KB |
| Program Memory Type | ECC flash |
| RAM | 8 KB |
| CPU Architecture | 16-bit |
| LCD Controller | Integrated segmented LCD controller |
| Maximum LCD Segments | 256 segments |
| LCD Common Outputs | 8 commons |
| LCD Segment Outputs | 32 segments |
| Core-Independent LCD Animation | Alternating dual display, blinking, and blanking |
| LCD Charge Pump | Supported for contrast management |
| 封装 | 48-pin TQFP (7 mm x 7 mm) |
| 安装类型 | Surface mount |
| Low-Power Architecture | eXtreme Low Power (XLP) |
| Sleep Current | Down to a few hundred nA |
| Temperature Grade | Extended temperature |
PIC24FJ64GL305-E/PT 48-pin tqfp (7 mm x 7 mm) 引脚配置指南
PIC24FJ64GL305-E/PT(48-pin tqfp (7 mm x 7 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: PIC24FJ64GL305-E/PT.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PIC24FJ64GL305-E/PT 适用于 6 应用s: Battery-Powered Utility Meters, Industrial Panel Meters, Portable Medical Instruments, Point-of-Sale and Payment Terminals, Battery-Powered Sensor Displays, Consumer Appliance Control Panels.
Battery-Powered Utility Meters
The PIC24FJ64GL305-E/PT fits utility meters that combine a segmented numeric display with long periods of low activity. Its 32 MHz, 16-bit MCU can process measurements while the XLP architecture reduces sleep current to a few hundred nA, supporting longer operation between battery replacements. The integrated LCD controller handles up to 256 segments with 8 common and 32 segment outputs, eliminating a separate display driver for compatible glass. Autonomous animation provides alternating display, blinking, and blanking without continuous CPU updates, which can reduce software activity and improve status visibility. The charge pump also supports controlled contrast in battery-operated equipment.
推荐
Industrial Panel Meters
The PIC24FJ64GL305-E/PT is suitable for industrial panel meters requiring a local segmented display and embedded measurement control. The 16-bit core operates at up to 32 MHz and 16 MIPS, providing enough performance for signal conditioning, compensation, and interface tasks while the LCD controller directly handles the display. Up to 256 segments and 8 commons support informative multi-digit instruments, while autonomous blinking or blanking can draw attention to alarm conditions. The extended-temperature ordering option supports assemblies operating beyond the standard industrial temperature grade.
推荐
Portable Medical Instruments
The PIC24FJ64GL305-E/PT can support portable medical instruments that present measurements on a compact segmented LCD while maintaining a low standby-power budget. The device combines 64 KB of ECC flash for firmware and data with 8 KB of RAM for working state, and its 16-bit CPU executes at up to 32 MHz for sensor acquisition and control. Sleep current down to a few hundred nA is valuable between measurements, while core-independent LCD animation can preserve a clear display status without continuous main-loop activity.
推荐
Point-of-Sale and Payment Terminals
The PIC24FJ64GL305-E/PT fits compact point-of-sale and payment terminals that use segmented customer-facing or operator displays alongside embedded control functions. Its 64 KB ECC flash provides room for application firmware, and the 32 MHz CPU supports communication and user-interface tasks. The LCD controller's 256-segment capability, eight common outputs, and autonomous animation provide flexible status presentation. XLP operation can reduce energy use in intermittent kiosks and portable payment equipment, although actual battery performance depends on the display refresh strategy and peripheral activity.
推荐
Battery-Powered Sensor Displays
The PIC24FJ64GL305-E/PT is well suited to remote sensor products that must show local measurements without transmitting data continuously. The MCU can wake to process a sensor event, update the segmented display, and return to a low-power sleep state. The built-in LCD resources reduce the need for a separate display controller, while core-independent animation supports blink and blank patterns with reduced firmware intervention. The 48-pin TQFP package provides a practical balance of I/O availability and board area for compact industrial or environmental monitoring instruments.
推荐
Consumer Appliance Control Panels
The PIC24FJ64GL305-E/PT can control compact appliances or embedded equipment with a segmented status display. Its 16-bit architecture handles control logic at up to 16 MIPS, while 64 KB of ECC flash supports structured firmware and 8 KB of RAM accommodates display buffers and application state. The integrated LCD animation functions improve feedback for timers, operating states, and alerts without requiring a graphical display interface. Designers should verify the exact LCD glass pin mapping and configure the charge pump for the intended supply and contrast range.
推荐
推荐产品汇总
工程参考数据: PIC24FJ64GL305-E/PT ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC24FJ64GL305T-I/PT | PIC24FJ64GL303-E/PT | PIC24FJ64GL304-E/PT | PIC24FJ64GL301-E/PT | PIC24FJ64GL302-E/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) |
| CPU Architecture | 16-bit | 16-bit | 16-bit | 16-bit | 16-bit | 16-bit |
| LCD Support | Integrated segmented LCD controller with autonomous animation | Integrated segmented LCD controller with autonomous animation | Segmented LCD controller; exact mapping not stated | Segmented LCD controller; exact mapping not stated | Segmented LCD controller; exact mapping not stated | Segmented LCD controller; exact mapping not stated |
| Temperature Ordering Grade | Extended temperature | Industrial temperature | Extended-temperature ordering code | Extended-temperature ordering code | Extended-temperature ordering code | Extended-temperature ordering code |
关键差异点
- Extended-temperature ordering option (对比 PIC24FJ64GL305T-I/PT)
- 32 MHz and 16 MIPS processing capability (对比 PIC24FJ64GL303-E/PT)
- 64 KB ECC flash with 8 KB RAM (对比 PIC24FJ64GL304-E/PT)
- Autonomous segmented-LCD animation (对比 PIC24FJ64GL301-E/PT)
设计说明
Assign the PCB from the exact 48-pin TQFP pin table rather than from a generic PIC24 pin header. The LCD segment and common functions, programming interface, oscillator pins, power rails, and ground returns can require specific multiplexing choices. Preserve the package orientation and pin-1 marking during assembly, and route sensitive display and clock signals away from noisy switching nodes. The package drawing and pin-description tables in the manufacturer datasheet should govern land-pattern and escape-routing decisions.
Power the MCU and LCD interface according to the manufacturer voltage limits and decoupling recommendations. Place the required bypass capacitors close to their associated supply pins, provide a low-impedance return path, and keep analog, display, and digital return-current behavior predictable. Do not assume the LCD charge pump can compensate for an unsuitable power source or excessive ripple; verify startup, display bias, and charge-pump behavior across the intended battery-voltage range.
Design firmware around the XLP sleep capability rather than treating low sleep current as the complete system-power budget. Measure the complete wake, acquisition, LCD-update, and return-to-sleep cycle, including sensor loads and display drive current. Autonomous blinking, blanking, and alternating-display animation can reduce processor activity, but their timing and LCD duty cycle still determine energy use. Validate the configured sleep current at the actual board temperature and supply voltage.
Do not substitute the industrial-temperature PIC24FJ64GL305T-I/PT for the extended-temperature PIC24FJ64GL305-E/PT without reviewing the environmental specification. The two packages are physically compatible, but the operating-temperature requirement can make the substitution invalid. Likewise, related GL301, GL302, GL303, and GL304 devices must be checked for LCD channel assignments, peripheral multiplexing, memory differences, and firmware requirements before being treated as drop-in replacements.
合规信息
No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was identified for the exact ordering code. The -E suffix denotes the extended-temperature ordering configuration, not AEC-Q100 qualification.