PIC24HJ128GP310A-E/PF - 16-bit 40MIPS MCU 128KB Flash | Microchip
部品番号: PIC24HJ128GP310A-E/PF ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $12.5 | $12.50 |
| 10 | $11.25 | $112.50 |
| 100 | $9.85 | $985.00 |
| 500 | $8.4 | $4,200.00 |
| 1,000 | $7.1 | $7,100.00 |
PIC24HJ128GP310A-E/PF 概要
A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, working RAM, and a rich set of peripherals (timers, ADC, communication controllers, GPIO) into a single chip. MCUs sit at the lowest tier of the embedded computing hierarchy - below microprocessors (MPUs) and SoCs - and are typically used for deterministic, real-time control loops in motor control, sensor interfacing, and human-machine interfaces. The PIC24H family belongs to the 16-bit MCU segment, positioned above 8-bit PIC16/PIC18 devices but below 32-bit PIC32/ARM Cortex-M families, offering a balance of deterministic interrupt latency, code density, and arithmetic headroom for control-oriented applications.
Key features of the PIC24HJ128GP310A-E/PF include up to 85 I/O pins, two 3-wire SPI modules, two I2C modules, two UART modules, two CAN modules (ECAN), a 12-bit A/D converter with up to 32 input channels, multiple 16-bit timers, an enhanced parallel master/slave port (PMP/PSP), and a real-time clock/calendar. The 16 KB SRAM supports ample data buffering for communication stacks and DSP scratchpad operations, while the 128 KB Flash accommodates application code plus bootloader and OTA update partitions. Integrated DMA reduces CPU load by autonomously moving data between peripherals and memory.
Architecturally, the PIC24HJ128GP310A-E/PF uses a 16-bit modified Harvard core with separate program and data buses and a 24-bit instruction word, enabling single-cycle fetch and a unified 16-MB linear code/data address space. The -A silicon revision improves ADC performance and lowers dynamic power relative to the original PIC24HJ128GP310. The device shares a footprint with the dsPIC33F family, simplifying migration when customers require DSP extensions.
Typical applications include automotive body and chassis ECUs, industrial motor control, uninterruptible power supply (UPS) controllers, building automation gateways, and medical instrumentation front-ends. The wide operating voltage range (3.0 V to 3.6 V) and extended temperature rating also make it appropriate for outdoor industrial gateways and heavy-equipment controllers.
When designing with this MCU, allocate decoupling capacitance close to every VDD/VSS pair and follow Microchip's TQFP-100 land pattern recommendations. Use Microchip's MPLAB X IDE, XC16 compiler, and MPLAB Code Configurator (MCC) for peripheral initialization. For migration paths, verify pinout against the dsPIC33FJ128GP310A-E/PF if DSP extensions become necessary.
This page consolidates distributor pricing, drop-in alternative MPNs, application notes, and design considerations beyond the manufacturer datasheet, offering a one-stop engineering and procurement reference.
ドロップイン代替品: PIC24HJ128GP310A-E/PF — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC24HJ128GP310A-E/PF （同一形状・フットプリント） — 相違点: ADC, Timers, Operating Temperature, Package, Core Architecture.
クイック比較ツール — 並列比較する代替部品を選択:
PIC24HJ128GP310A-I/PF
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC24HJ128GP310T-I/PF
✅ ドロップイン✓ 在庫あり
$5.78 / 個
データシートを見る →PIC24HJ128GP210A-I/PF
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$5.7 / 個
データシートを見る →PIC24HJ128GP210-I/PF
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$5.32 / 個
データシートを見る →dsPIC33FJ128GP310A-E/PF
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC24HJ128GP306A-E/PT
✅ ドロップイン✓ 在庫あり
$6.1 / 個
データシートを見る →PIC24HJ128GP310A-E/PF 最大定格＆電気的特性
| Core Architecture | PIC24H 16-bit modified Harvard |
| CPU Speed (MIPS) | 40 MIPS at 40 MHz |
| Clock Frequency | 40 MHz max |
| Program Memory (Flash) | 128 KB (43K x 24 words) |
| SRAM | 16 KB |
| Operating Voltage | 3.0 V to 3.6 V |
| 動作温度 | -40C to +125C (automotive / -E grade) |
| I/O Pins | Up to 85 |
| ADC | 12-bit, up to 32 channels |
| Timers | Multiple 16-bit timers |
| Communication Peripherals | 2x SPI, 2x I2C, 2x UART, 2x ECAN, PMP/PSP |
| DMA Channels | 8-channel DMA |
| パッケージ | 100-pin TQFP (14x14 mm) - PF suffix |
| AEC-Q100 | Qualified (automotive grade) |
| RoHS ステータス | Compliant |
| 実装タイプ | Surface Mount |
| Instruction Set | 16-bit PIC24H, 24-bit instruction word |
PIC24HJ128GP310A-E/PF ピン構成
| ピン 1 | RG15 — I/O port RG15 (also SDA2) |
| ピン 2 | RG12 — I/O port RG12 (also C1RX) |
| ピン 3 | RG13 — I/O port RG13 (also C1TX) |
| ピン 4 | RG14 — I/O port RG14 (also C2RX) |
| ピン 5 | MCLR — Master Clear (reset) input |
| ピン 6 | RG0 — I/O port RG0 |
| ピン 7 | RG1 — I/O port RG1 |
| ピン 8 | VDD — Positive supply (3.3V) |
| ピン 9 | VSS — Ground |
| ピン 10 | OSC1 — Oscillator crystal input / CLKI |
| ピン 11 | OSC2 — Oscillator crystal output / CLKO |
| ピン 12 | RA0 — I/O port RA0 (also AN0) |
| ピン 13 | RA1 — I/O port RA1 (also AN1) |
| ピン 14 | RA2 — I/O port RA2 (also AN2 / VREF-) |
| ピン 15 | RA3 — I/O port RA3 (also AN3 / VREF+) |
| ピン 16 | RA4 — I/O port RA4 (also AN4) |
| ピン 17 | RA5 — I/O port RA5 (also AN5) |
| ピン 18 | RA6 — I/O port RA6 (also OSC1 alt) |
| ピン 19 | RA7 — I/O port RA7 (also OSC2 alt) |
| ピン 20 | RB0 — I/O port RB0 (also AN8 / PGED1) |
| ピン 21 | RB1 — I/O port RB1 (also AN9 / PGEC1) |
| ピン 22 | RB2 — I/O port RB2 (also AN10) |
| ピン 23 | RB3 — I/O port RB3 (also AN11) |
| ピン 24 | RB4 — I/O port RB4 (also AN12) |
| ピン 25 | RB5 — I/O port RB5 (also AN13) |
| ピン 26 | RB6 — I/O port RB6 (also AN14 / PGED2) |
| ピン 27 | RB7 — I/O port RB7 (also AN15 / PGEC2) |
| ピン 28 | RB8 — I/O port RB8 (also AN16) |
| ピン 29 | RB9 — I/O port RB9 (also AN17) |
| ピン 30 | RB10 — I/O port RB10 (also AN18) |
| ピン 31 | RB11 — I/O port RB11 (also AN19) |
| ピン 32 | VDD — Positive supply (3.3V) |
| ピン 33 | VSS — Ground |
| ピン 34 | RC1 — I/O port RC1 (also T2CK) |
| ピン 35 | RC2 — I/O port RC2 (also T3CK) |
| ピン 36 | RC3 — I/O port RC3 |
| ピン 37 | RC4 — I/O port RC4 |
| ピン 38 | RC5 — I/O port RC5 |
| ピン 39 | RC6 — I/O port RC6 |
| ピン 40 | RC7 — I/O port RC7 |
| ピン 41 | RC8 — I/O port RC8 |
| ピン 42 | RC9 — I/O port RC9 |
| ピン 43 | VDD — Positive supply (3.3V) |
| ピン 44 | VSS — Ground |
| ピン 45 | RD0 — I/O port RD0 |
| ピン 46 | RD1 — I/O port RD1 |
| ピン 47 | RD2 — I/O port RD2 |
| ピン 48 | RD3 — I/O port RD3 |
| ピン 49 | RD4 — I/O port RD4 |
| ピン 50 | RD5 — I/O port RD5 |
| ピン 51 | RD6 — I/O port RD6 |
| ピン 52 | RD7 — I/O port RD7 |
| ピン 53 | RD8 — I/O port RD8 |
| ピン 54 | RD9 — I/O port RD9 |
| ピン 55 | RD10 — I/O port RD10 |
| ピン 56 | RD11 — I/O port RD11 |
| ピン 57 | RD12 — I/O port RD12 |
| ピン 58 | RD13 — I/O port RD13 |
| ピン 59 | RD14 — I/O port RD14 |
| ピン 60 | RD15 — I/O port RD15 |
| ピン 61 | VDD — Positive supply (3.3V) |
| ピン 62 | VSS — Ground |
| ピン 63 | RF0 — I/O port RF0 |
| ピン 64 | RF1 — I/O port RF1 |
| ピン 65 | RF2 — I/O port RF2 |
| ピン 66 | RF3 — I/O port RF3 |
| ピン 67 | RF4 — I/O port RF4 |
| ピン 68 | RF5 — I/O port RF5 |
| ピン 69 | RF6 — I/O port RF6 |
| ピン 70 | RF7 — I/O port RF7 |
| ピン 71 | RF8 — I/O port RF8 |
| ピン 72 | RE0 — I/O port RE0 (also AN20 / PMD0) |
| ピン 73 | RE1 — I/O port RE1 (also AN21 / PMD1) |
| ピン 74 | RE2 — I/O port RE2 (also AN22 / PMD2) |
| ピン 75 | RE3 — I/O port RE3 (also AN23 / PMD3) |
| ピン 76 | RE4 — I/O port RE4 (also AN24 / PMD4) |
| ピン 77 | RE5 — I/O port RE5 (also AN25 / PMD5) |
| ピン 78 | RE6 — I/O port RE6 (also AN26 / PMD6) |
| ピン 79 | RE7 — I/O port RE7 (also AN27 / PMD7) |
| ピン 80 | RG2 — I/O port RG2 |
| ピン 81 | RG3 — I/O port RG3 |
| ピン 82 | RG6 — I/O port RG6 |
| ピン 83 | RG7 — I/O port RG7 |
| ピン 84 | RG8 — I/O port RG8 |
| ピン 85 | RG9 — I/O port RG9 |
| ピン 86 | VDD — Positive supply (3.3V) |
| ピン 87 | VSS — Ground |
| ピン 88 | RA9 — I/O port RA9 |
| ピン 89 | RA10 — I/O port RA10 |
| ピン 90 | RA12 — I/O port RA12 |
| ピン 91 | RA13 — I/O port RA13 |
| ピン 92 | RA14 — I/O port RA14 |
| ピン 93 | RA15 — I/O port RA15 |
| ピン 94 | RB12 — I/O port RB12 (also AN20 alt) |
| ピン 95 | RB13 — I/O port RB13 (also AN21 alt) |
| ピン 96 | RB14 — I/O port RB14 (also AN22 alt / CVREF) |
| ピン 97 | RB15 — I/O port RB15 (also AN23 alt / PMALL) |
| ピン 98 | AVDD — Analog positive supply (3.3V) |
| ピン 99 | AVSS — Analog ground |
| ピン 100 | ENVREG — Voltage regulator enable (tie to VDD) |
主な用途
PIC24HJ128GP310A-E/PF の用途: 6 件s: Automotive Body and Chassis ECUs, Industrial Motor Control (BLDC / PMSM), Uninterruptible Power Supply (UPS) Controllers, Building Automation Gateways, Medical Instrumentation Front-Ends, Display and HMI Controllers.
Automotive Body and Chassis ECUs
The PIC24HJ128GP310A-E/PF fits automotive body and chassis ECU applications due to its AEC-Q100 Grade 1 qualification, -40C to +125C operating range, and dual ECAN modules for high-speed CAN-FD networks. Its 128 KB Flash supports a CAN stack, diagnostics UDS layer, and bootloader for OTA reprogramming. The 16 KB SRAM is sufficient for typical body controller workloads including door modules, lighting, HVAC, and seat controllers. The 100-pin TQFP package delivers 85 GPIO, sufficient for switch inputs, relay drivers, and LIN-master communication. Use Microchip's AN1249 application note for ECAN configuration. Pin compatibility with dsPIC33FJ128GP310A-E/PF provides an upgrade path for vibration analysis or audio processing in active-noise cancellation systems.
おすすめ
Industrial Motor Control (BLDC / PMSM)
In BLDC and PMSM motor control, the PIC24HJ128GP310A-E/PF delivers 40 MIPS deterministic compute for field-oriented control (FOC) loops at 20 kHz PWM. The 12-bit ADC with up to 32 channels samples phase currents via integrated op-amps and supports dual-sample-and-hold for simultaneous current sensing. The 16 KB SRAM is sufficient for Park/Clarke transforms and PI controllers. Eight DMA channels move ADC samples without CPU intervention, leaving headroom for speed PI, current PI, and space-vector PWM generation. The extended temperature range supports outdoor industrial drives and pump controllers. Reference Microchip application note AN1078 for sensorless FOC firmware, which ports directly to this device.
おすすめ
Uninterruptible Power Supply (UPS) Controllers
The PIC24HJ128GP310A-E/PF is well suited to UPS and inverter controllers thanks to its 12-bit ADC for AC voltage and current sensing, two UART modules for Modbus or RS-232 communication, and 40 MIPS CPU bandwidth for sinusoidal PWM at 20 kHz. The 128 KB Flash holds the SPWM lookup table, closed-loop control, and LCD menu code, while the 16 KB SRAM supports data logging buffers. Two ECAN controllers allow integration into modular UPS paralleling systems. The extended -40C to +125C range tolerates industrial cabinet environments. Reference Microchip AN1422 for grid-tie inverter firmware; MPLAB X IDE plus the XC16 compiler provides a complete toolchain.
おすすめ
Building Automation Gateways
In building automation gateways, the PIC24HJ128GP310A-E/PF aggregates multiple fieldbuses (two ECAN for BACnet/CanAero, two UART for Modbus RTU, two SPI for wireless or display modules) and bridges them to BACnet/IP or cloud uplinks. The 128 KB Flash accommodates full BACnet stack, MQTT, and TLS-lite handshake for secure cloud connectivity. The 16 KB SRAM is adequate for Modbus transaction buffers. The 100-pin TQFP exposes 85 GPIO for status LEDs, keypads, and discrete I/O. AEC-Q100 qualification means the same firmware binary can serve both commercial HVAC and industrial-grade outdoor controllers, reducing BOM fragmentation for gateway ODMs.
おすすめ
Medical Instrumentation Front-Ends
The PIC24HJ128GP310A-E/PF suits medical instrumentation front-ends such as portable patient monitors, infusion pumps, and blood-gas analyzers where deterministic real-time response is critical. The 12-bit ADC provides adequate resolution for temperature, pressure, and flow sensor digitization, while the 40 MIPS CPU runs averaging and FIR filter routines in real time. The two UART modules drive a clinical display and a service/test port simultaneously; SPI ports interface to wireless or EEPROM data loggers. AEC-Q100 screening and the wide -40C to +125C range allow deployment in ambulances and operating theatres. Reference IEC 60601 compliance with appropriate isolation; this MCU itself is not a safety-critical component.
おすすめ
Display and HMI Controllers
For HMI panels with TFT LCD displays, the PIC24HJ128GP310A-E/PF integrates a Parallel Master Port (PMP/PSP) that drives TFT displays up to QVGA (320x240) without external controller logic. The 85 GPIO handle resistive touch-screen sensing via the 12-bit ADC, plus discrete keypad inputs. The 128 KB Flash accommodates graphics libraries, menus, and Chinese/Unicode font tables; 16 KB SRAM holds frame-buffer slices for partial-screen updates. Two SPI channels drive external Flash for assets and an optional Wi-Fi module for cloud connectivity. Extended -40C to +125C rating suits industrial HMI panels deployed outdoors, including charging-station UI and kiosk applications.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC24HJ128GP310A-E/PF — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC24HJ128GP310A-I/PF | dsPIC33FJ128GP310A-E/PF | PIC24HJ128GP210A-I/PF | PIC24HJ128GP306A-E/PT |
|---|---|---|---|---|---|
| Package | TQFP-100 (PF) | TQFP-100 (PF) | TQFP-100 (PF) | TQFP-100 (PF) | TQFP-100 (PT) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | PIC24H 16-bit | PIC24H 16-bit | dsPIC33F 16-bit DSP | PIC24H 16-bit | PIC24H 16-bit |
| Max CPU Speed | 40 MIPS / 40 MHz | 40 MIPS / 40 MHz | 40 MIPS / 40 MHz + DSP | 40 MIPS / 40 MHz | 40 MIPS / 40 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 64 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| Operating Temperature | -40C to +125C (automotive) | -40C to +85C (industrial) | -40C to +125C (automotive) | -40C to +85C (industrial) | -40C to +125C (automotive) |
| AEC-Q100 | Qualified | Not screened (industrial) | Qualified | Not screened (industrial) | Qualified |
| ECAN Modules | 2 | 2 | 2 | 2 | 2 |
主な差別化要因
- AEC-Q100 qualified with -40C to +125C extended temperature range （vs PIC24HJ128GP310A-I/PF)
- Silicon revision -A with improved ADC performance and lower power （vs PIC24HJ128GP310-I/PF (pre-A revision))
- 128 KB Flash for full automotive stack including bootloader （vs PIC24HJ128GP306A-E/PT)
設計ノート
Estimated: at 40 MHz with all peripherals active, the PIC24HJ128GP310A-E/PF draws approximately 60 mA to 80 mA from the 3.3 V rail. Decouple every VDD/VSS pair with a 100 nF X7R ceramic placed within 2 mm of the pins, and add a single 4.7 uF bulk capacitor near the AVDD/AVSS analog pair. Microchip recommends a ferrite bead between digital and analog VDD rails for ADC-noise-sensitive applications such as motor-current sensing.
Route the 40 MHz system oscillator on the top layer with a guarded ground ring; keep OSC1/OSC2 traces under 10 mm. The ICSP PGEDx/PGECx pairs should each have a series 4.7 kohm resistor near the MCU for in-circuit debug protection. Reserve the 100-pin TQFP thermal pad connection pattern even though TQFP-100 has no exposed pad - leaving a continuous ground pour under the device improves thermal and EMI performance.
Always tie the ENVREG pin (100) directly to VDD on the PIC24HJ128GP310A-E/PF. Failing to tie ENVREG high causes the internal 2.5V core regulator to remain off, and the MCU will not boot. Configure unused I/O pins as outputs (rather than inputs) to avoid spurious interrupts from floating CMOS inputs. The MCLR pin must have a 10 kohm pull-up to VDD and a 100 nF capacitor to ground for clean reset behavior.
コンプライアンス情報
AEC-Q100 Grade 1 qualified per Microchip product family documentation. RoHS and REACH compliant; MSL-3 surface-mount reflow rated per JEDEC J-STD-020.
