PIC24HJ32GP202-I/MM - 16-Bit 40 MIPS MCU | Microchip
部品番号: PIC24HJ32GP202-I/MM ✓ 生産中PIC24HJ32GP202-I/MM 概要
A PIC24H microcontroller is a 16-bit embedded-control device within the broader semiconductor and microcontroller hierarchy. It combines a modified Harvard CPU architecture with Flash program memory, data RAM, timers, communications peripherals, and analog functions. This combination makes it suitable for industrial control systems where deterministic execution, compact packaging, and a broad peripheral set are more important than the processing power of a general-purpose processor.
The device provides 32 KB of Flash, organized as 11K x 24 words, and 2 KB of data SRAM. Its 40 MIPS execution rate supports responsive control loops and communications handling. The 28-QFN-S package reduces board area compared with larger leaded packages, while the 21 available I/O pins provide connections for sensors, actuators, communication interfaces, and supervisory signals. The -I grade supports an operating temperature range of -40°C to +140°C according to the Future Electronics product listing.
The CPU uses a 16-bit modified Harvard architecture and a 24-bit instruction word containing a variable-length opcode field, as described in the Microchip PIC24HJ32GP202/204 and PIC24HJ16GP304 data sheet. This architecture separates program and data workflows while supporting an enhanced instruction set and multiple addressing modes. The family also supports 75 interrupt sources and four trap sources, enabling responsive handling of asynchronous events and fault conditions.
Typical uses include industrial sensor controllers, motor and actuator control equipment, compact communications modules, industrial automation controllers, and mixed-signal monitoring systems. The combination of 40 MIPS performance, 2 KB SRAM, and a compact 28-pin package is particularly useful when control logic must be integrated close to sensors or power-conversion circuitry without relying on a larger external processor.
When designing around the PIC24HJ32GP202-I/MM, verify the exposed-pad connection, pin multiplexing, and decoupling requirements in the manufacturer's package drawing and pin-description table. The 6 x 6 mm QFN-S footprint also requires a PCB land pattern capable of providing reliable thermal and electrical performance. Firmware should account for the documented peripheral multiplexing and interrupt behavior of the selected package.
This product record combines the manufacturer's device documentation with engineering-oriented guidance covering the PIC24H CPU architecture, memory organization, QFN-S footprint, application fit, pin-assignment cautions, and verified family alternatives. It is intended to help designers evaluate PIC24HJ32GP202-I/MM for compact, high-performance embedded-control platforms before committing the board layout and firmware.
ドロップイン代替品: PIC24HJ32GP202-I/MM — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC24HJ32GP202-I/MM (同一形状・フットプリント) — 相違点: Package, Operating Temperature, RoHS Status, Core Architecture, Program Memory (Flash).
PIC24HJ32GP202-E/MM
✅ ドロップイン価格はお問い合わせください
データシートを見る →PIC24HJ32GP202-H/MM
✅ ドロップイン📋 参考代替品(カタログ未掲載)
PIC24HJ32GP204-E/PT
✅ ドロップイン価格はお問い合わせください
データシートを見る →PIC24HJ16GP304-H/ML
✅ ドロップイン価格はお問い合わせください
データシートを見る →PIC24HJ32GP202-I/MM 最大定格&電気的特性
| CPU Architecture | 16-bit modified Harvard architecture |
| Maximum CPU Performance | 40 MIPS |
| Flash Program Memory | 32 KB (11K x 24 words) |
| Data SRAM | 2 KB |
| Instruction Word Width | 24-bit variable-length opcode |
| 動作電源電圧 | 3.0 V to 3.5 V |
| I/O Pin Count | 21 pins |
| Interrupt Sources | 75 sources |
| Trap Sources | 4 sources |
| パッケージ | 28-QFN-S, 6 x 6 mm |
| 実装タイプ | Surface mount |
| 動作温度範囲 | -40°C to +140°C |
| Timer and Counter Count | 3 timers/counters |
| Product Type | PIC24H 16-bit microcontroller |
| ライフサイクル状態 | Active |
PIC24HJ32GP202-I/MM 28-qfn-s, 6 x 6 mm ピン配置ガイド
PIC24HJ32GP202-I/MM (28-qfn-s, 6 x 6 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: PIC24HJ32GP202-I/MM.
詳細は データシート をご参照ください。
主な用途
PIC24HJ32GP202-I/MM の用途: 6 件s: Industrial Sensor and Signal Controller, Compact Motor and Actuator Control, Industrial Communication Gateway, Mixed-Signal Monitoring System, Portable Instrumentation Controller, Automated Equipment Control.
Industrial Sensor and Signal Controller
The PIC24HJ32GP202-I/MM fits compact sensor-acquisition and signal-conditioning controllers because its 16-bit CPU executes at 40 MIPS while retaining 2 KB of SRAM for local working data and buffering. The 28-QFN-S package leaves more board area than a leaded controller, enabling placement near sensors or analog front ends. Three timers/counters can organize acquisition intervals, sampling cadence, and timeout functions. The -40°C to +140°C operating range supports demanding industrial environments, although the final enclosure, isolation strategy, and power supply still determine overall system robustness.
おすすめ
Compact Motor and Actuator Control
The PIC24HJ32GP202-I/MM is suitable for small motor, valve, or actuator controllers where fast deterministic control must coexist with a compact footprint. Its 40 MIPS execution rate provides substantial headroom for motion sequencing, input filtering, and supervisory logic, while three timers/counters support timing functions. The 28-QFN-S 6 x 6 mm package is useful where board area is constrained. Designers should separate sensitive motor-power routing from microcontroller signals and verify that the 3.0 V to 3.5 V operating range remains within limits during transients.
おすすめ
Industrial Communication Gateway
The PIC24HJ32GP202-I/MM can serve as a protocol gateway or communications controller in compact industrial equipment because the 40 MIPS CPU provides room for framing, address management, and real-time supervision around its communication peripherals. The 32 KB Flash capacity supports embedded protocol handlers, and 2 KB SRAM can hold message buffers and working state. Its 21 I/O pins permit connection to transceivers, indicators, and service controls. Interface suitability depends on the selected alternate functions and exact peripheral assignments in the manufacturer pin-description table.
おすすめ
Mixed-Signal Monitoring System
The PIC24HJ32GP202-I/MM is well suited to mixed-signal monitoring equipment that must combine sensor acquisition, threshold evaluation, and control output in a small embedded package. The 16-bit modified Harvard architecture and 40 MIPS performance support responsive calculation, while 21 I/O pins provide connectivity for sensor inputs and alarm outputs. The 2 KB SRAM allows immediate storage of sampled values and status variables without requiring an external memory component. Board-level analog isolation, reference quality, and noise control remain essential for preserving measurement accuracy.
おすすめ
Portable Instrumentation Controller
The PIC24HJ32GP202-I/MM fits portable test and measurement instruments where a high-performance controller must occupy little board area. Its 32 KB Flash stores measurement control code and configuration handling, while the 40 MIPS processor supports responsive sampling, calibration, and user-interface updates. The compact 28-QFN-S package assists miniaturization, while three timers/counters help organize trigger and measurement intervals. A portable product still needs explicit battery regulation, low-power-state strategy, analog front-end design, and thermal verification for its enclosure and ambient conditions.
おすすめ
Automated Equipment Control
The PIC24HJ32GP202-I/MM is appropriate for automated production and process equipment where deterministic sequencing and local control are required. The 16-bit CPU at 40 MIPS can execute machine-state logic, coordinate timing functions, and monitor interlocks without a separate high-level processor. Twenty-one I/O pins support sensors, solenoid controls, status indicators, and service interfaces, while the industrial temperature range of -40°C to +140°C supports operation across controlled industrial environments. Functional-safety requirements, output drive ratings, and electromagnetic compatibility must be assessed at the complete-system level.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC24HJ32GP202-I/MM — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC24HJ32GP202-E/MM | PIC24HJ32GP202-H/MM | PIC24HJ32GP204 | PIC24HJ16GP304 |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-QFN-S (6x6) | 28-QFN-S (6x6) | 28-QFN-S (6x6) | 28-QFN-S (6x6) | 28-QFN-S (6x6) |
| CPU Architecture | 16-bit modified Harvard | 16-bit modified Harvard | 16-bit modified Harvard | 16-bit modified Harvard | 16-bit modified Harvard |
主な差別化要因
- Higher listed CPU performance than the automotive-grade same-footprint option (vs PIC24HJ32GP202-H/MM)
- Industrial-temperature specification for broad environmental deployment (vs PIC24HJ32GP202-E/MM)
- Target combines 40 MIPS, 32 KB Flash, and 2 KB SRAM in one device (vs PIC24HJ16GP304)
設計ノート
Use the manufacturer package drawing for the 28-QFN-S 6 x 6 mm land pattern and verify the exposed-pad connection before releasing the PCB. Place input and output decoupling capacitors close to their assigned power pins, keep the exposed-pad connection free of unintended thermal or electrical coupling, and maintain a continuous ground reference beneath the device. These practices reduce supply disturbance and improve signal integrity in compact control designs.
Assign every peripheral signal from the Microchip pin-description table rather than assuming that similar functions are interchangeable among family members. PIC24 devices multiplex several functions onto common I/O pins, so a valid schematic assignment must also satisfy the selected alternate-function and peripheral-conflict rules. Review the package pinout during schematic capture and freeze all assignments before finalizing the board layout.
Design the 3.3 V supply path for the documented 3.0 V to 3.5 V operating range and assess startup and transient behavior separately from steady-state operation. Use short, low-impedance supply connections and place the required bulk and high-frequency decoupling near the device. If the controller shares a board with motors, relays, or switching power stages, isolate noisy return paths and prevent their transients from pushing the MCU rail outside its limits.
The 28-QFN-S package relies on its exposed pad and surrounding PCB copper for heat spreading. Preserve as much uninterrupted copper as practical, avoid placing thermal breaks beneath the device, and use the manufacturer thermal information to evaluate the actual board construction. For compact systems with nearby heat sources, calculate junction temperature from worst-case ambient temperature, estimated internal dissipation, and the effective thermal resistance of the assembled PCB.
コンプライアンス情報
The target is an industrial-temperature MCU, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified in the supplied product information. AEC-Q100 qualification is marked not applicable because the -I ordering code is not identified as an automotive-qualified variant.