PIC24HJ32GP202-I/MM - 16-Bit 40 MIPS MCU | Microchip
料号: PIC24HJ32GP202-I/MM ✓ 量产中PIC24HJ32GP202-I/MM 概述
A PIC24H microcontroller is a 16-bit embedded-control device within the broader semiconductor and microcontroller hierarchy. It combines a modified Harvard CPU architecture with Flash program memory, data RAM, timers, communications peripherals, and analog functions. This combination makes it suitable for industrial control systems where deterministic execution, compact packaging, and a broad peripheral set are more important than the processing power of a general-purpose processor.
The device provides 32 KB of Flash, organized as 11K x 24 words, and 2 KB of data SRAM. Its 40 MIPS execution rate supports responsive control loops and communications handling. The 28-QFN-S package reduces board area compared with larger leaded packages, while the 21 available I/O pins provide connections for sensors, actuators, communication interfaces, and supervisory signals. The -I grade supports an operating temperature range of -40°C to +140°C according to the Future Electronics product listing.
The CPU uses a 16-bit modified Harvard architecture and a 24-bit instruction word containing a variable-length opcode field, as described in the Microchip PIC24HJ32GP202/204 and PIC24HJ16GP304 data sheet. This architecture separates program and data workflows while supporting an enhanced instruction set and multiple addressing modes. The family also supports 75 interrupt sources and four trap sources, enabling responsive handling of asynchronous events and fault conditions.
Typical uses include industrial sensor controllers, motor and actuator control equipment, compact communications modules, industrial automation controllers, and mixed-signal monitoring systems. The combination of 40 MIPS performance, 2 KB SRAM, and a compact 28-pin package is particularly useful when control logic must be integrated close to sensors or power-conversion circuitry without relying on a larger external processor.
When designing around the PIC24HJ32GP202-I/MM, verify the exposed-pad connection, pin multiplexing, and decoupling requirements in the manufacturer's package drawing and pin-description table. The 6 x 6 mm QFN-S footprint also requires a PCB land pattern capable of providing reliable thermal and electrical performance. Firmware should account for the documented peripheral multiplexing and interrupt behavior of the selected package.
This product record combines the manufacturer's device documentation with engineering-oriented guidance covering the PIC24H CPU architecture, memory organization, QFN-S footprint, application fit, pin-assignment cautions, and verified family alternatives. It is intended to help designers evaluate PIC24HJ32GP202-I/MM for compact, high-performance embedded-control platforms before committing the board layout and firmware.
直接替换替代料: PIC24HJ32GP202-I/MM ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: PIC24HJ32GP202-I/MM (相同外形与封装尺寸) ——差异在于 Package, Operating Temperature, RoHS Status, Core Architecture, Program Memory (Flash).
PIC24HJ32GP202-E/MM
✅ 直接替换联系询价
查看数据手册 →PIC24HJ32GP202-H/MM
✅ 直接替换📋 参考替代料(不在目录中)
PIC24HJ32GP204-E/PT
✅ 直接替换联系询价
查看数据手册 →PIC24HJ16GP304-H/ML
✅ 直接替换联系询价
查看数据手册 →PIC24HJ32GP202-I/MM 最大额定值与电气特性
| CPU Architecture | 16-bit modified Harvard architecture |
| Maximum CPU Performance | 40 MIPS |
| Flash Program Memory | 32 KB (11K x 24 words) |
| Data SRAM | 2 KB |
| Instruction Word Width | 24-bit variable-length opcode |
| 工作电源电压 | 3.0 V to 3.5 V |
| I/O Pin Count | 21 pins |
| Interrupt Sources | 75 sources |
| Trap Sources | 4 sources |
| 封装 | 28-QFN-S, 6 x 6 mm |
| 安装类型 | Surface mount |
| 工作温度范围 | -40°C to +140°C |
| Timer and Counter Count | 3 timers/counters |
| Product Type | PIC24H 16-bit microcontroller |
| 生命周期状态 | Active |
PIC24HJ32GP202-I/MM 28-qfn-s, 6 x 6 mm 引脚配置指南
PIC24HJ32GP202-I/MM(28-qfn-s, 6 x 6 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: PIC24HJ32GP202-I/MM.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PIC24HJ32GP202-I/MM 适用于 6 应用s: Industrial Sensor and Signal Controller, Compact Motor and Actuator Control, Industrial Communication Gateway, Mixed-Signal Monitoring System, Portable Instrumentation Controller, Automated Equipment Control.
Industrial Sensor and Signal Controller
The PIC24HJ32GP202-I/MM fits compact sensor-acquisition and signal-conditioning controllers because its 16-bit CPU executes at 40 MIPS while retaining 2 KB of SRAM for local working data and buffering. The 28-QFN-S package leaves more board area than a leaded controller, enabling placement near sensors or analog front ends. Three timers/counters can organize acquisition intervals, sampling cadence, and timeout functions. The -40°C to +140°C operating range supports demanding industrial environments, although the final enclosure, isolation strategy, and power supply still determine overall system robustness.
推荐
Compact Motor and Actuator Control
The PIC24HJ32GP202-I/MM is suitable for small motor, valve, or actuator controllers where fast deterministic control must coexist with a compact footprint. Its 40 MIPS execution rate provides substantial headroom for motion sequencing, input filtering, and supervisory logic, while three timers/counters support timing functions. The 28-QFN-S 6 x 6 mm package is useful where board area is constrained. Designers should separate sensitive motor-power routing from microcontroller signals and verify that the 3.0 V to 3.5 V operating range remains within limits during transients.
推荐
Industrial Communication Gateway
The PIC24HJ32GP202-I/MM can serve as a protocol gateway or communications controller in compact industrial equipment because the 40 MIPS CPU provides room for framing, address management, and real-time supervision around its communication peripherals. The 32 KB Flash capacity supports embedded protocol handlers, and 2 KB SRAM can hold message buffers and working state. Its 21 I/O pins permit connection to transceivers, indicators, and service controls. Interface suitability depends on the selected alternate functions and exact peripheral assignments in the manufacturer pin-description table.
推荐
Mixed-Signal Monitoring System
The PIC24HJ32GP202-I/MM is well suited to mixed-signal monitoring equipment that must combine sensor acquisition, threshold evaluation, and control output in a small embedded package. The 16-bit modified Harvard architecture and 40 MIPS performance support responsive calculation, while 21 I/O pins provide connectivity for sensor inputs and alarm outputs. The 2 KB SRAM allows immediate storage of sampled values and status variables without requiring an external memory component. Board-level analog isolation, reference quality, and noise control remain essential for preserving measurement accuracy.
推荐
Portable Instrumentation Controller
The PIC24HJ32GP202-I/MM fits portable test and measurement instruments where a high-performance controller must occupy little board area. Its 32 KB Flash stores measurement control code and configuration handling, while the 40 MIPS processor supports responsive sampling, calibration, and user-interface updates. The compact 28-QFN-S package assists miniaturization, while three timers/counters help organize trigger and measurement intervals. A portable product still needs explicit battery regulation, low-power-state strategy, analog front-end design, and thermal verification for its enclosure and ambient conditions.
推荐
Automated Equipment Control
The PIC24HJ32GP202-I/MM is appropriate for automated production and process equipment where deterministic sequencing and local control are required. The 16-bit CPU at 40 MIPS can execute machine-state logic, coordinate timing functions, and monitor interlocks without a separate high-level processor. Twenty-one I/O pins support sensors, solenoid controls, status indicators, and service interfaces, while the industrial temperature range of -40°C to +140°C supports operation across controlled industrial environments. Functional-safety requirements, output drive ratings, and electromagnetic compatibility must be assessed at the complete-system level.
推荐
推荐产品汇总
工程参考数据: PIC24HJ32GP202-I/MM ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC24HJ32GP202-E/MM | PIC24HJ32GP202-H/MM | PIC24HJ32GP204 | PIC24HJ16GP304 |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-QFN-S (6x6) | 28-QFN-S (6x6) | 28-QFN-S (6x6) | 28-QFN-S (6x6) | 28-QFN-S (6x6) |
| CPU Architecture | 16-bit modified Harvard | 16-bit modified Harvard | 16-bit modified Harvard | 16-bit modified Harvard | 16-bit modified Harvard |
关键差异点
- Higher listed CPU performance than the automotive-grade same-footprint option (对比 PIC24HJ32GP202-H/MM)
- Industrial-temperature specification for broad environmental deployment (对比 PIC24HJ32GP202-E/MM)
- Target combines 40 MIPS, 32 KB Flash, and 2 KB SRAM in one device (对比 PIC24HJ16GP304)
设计说明
Use the manufacturer package drawing for the 28-QFN-S 6 x 6 mm land pattern and verify the exposed-pad connection before releasing the PCB. Place input and output decoupling capacitors close to their assigned power pins, keep the exposed-pad connection free of unintended thermal or electrical coupling, and maintain a continuous ground reference beneath the device. These practices reduce supply disturbance and improve signal integrity in compact control designs.
Assign every peripheral signal from the Microchip pin-description table rather than assuming that similar functions are interchangeable among family members. PIC24 devices multiplex several functions onto common I/O pins, so a valid schematic assignment must also satisfy the selected alternate-function and peripheral-conflict rules. Review the package pinout during schematic capture and freeze all assignments before finalizing the board layout.
Design the 3.3 V supply path for the documented 3.0 V to 3.5 V operating range and assess startup and transient behavior separately from steady-state operation. Use short, low-impedance supply connections and place the required bulk and high-frequency decoupling near the device. If the controller shares a board with motors, relays, or switching power stages, isolate noisy return paths and prevent their transients from pushing the MCU rail outside its limits.
The 28-QFN-S package relies on its exposed pad and surrounding PCB copper for heat spreading. Preserve as much uninterrupted copper as practical, avoid placing thermal breaks beneath the device, and use the manufacturer thermal information to evaluate the actual board construction. For compact systems with nearby heat sources, calculate junction temperature from worst-case ambient temperature, estimated internal dissipation, and the effective thermal resistance of the assembled PCB.
合规信息
The target is an industrial-temperature MCU, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified in the supplied product information. AEC-Q100 qualification is marked not applicable because the -I ordering code is not identified as an automotive-qualified variant.