PIC24HJ32GP302T-I/MM - 40 MIPS 16-bit MCU, 32KB Flash | Microchip
部品番号: PIC24HJ32GP302T-I/MM ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $4.32 | $4.32 |
| 10 | $3.95 | $39.50 |
| 100 | $3.52 | $352.00 |
| 500 | $3.18 | $1,590.00 |
| 1,000 | $2.85 | $2,850.00 |
PIC24HJ32GP302T-I/MM 概要
A 16-bit microcontroller (MCU) is an integrated processor core that executes arithmetic and logical operations on 16-bit-wide data paths, occupying a middle tier in the embedded hierarchy: 16-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. PIC24H devices employ a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, optimized for DSP-style computation loops and high-speed control applications. PIC24H IS also known as "dsPIC33F compatible" because the family shares pin compatibility with dsPIC33F MCUs and CISC architecture.
Key specifications of the device include 21 general-purpose digital I/Os, three 16-bit timers/counters (which can be paired to form one 32-bit timer), two output capture modules, and two UART modules. The following features distinguish it: an integrated 10/12-bit ADC with up to 500 ksps throughput, hardware multiplier for DSP operations, and dual comparator modules. The industrial-grade -I temperature range and 28-QFN compact footprint enable space-constrained industrial designs.
The architecture is a 16-bit PIC core with hardware multiply/divide and DSP extensions, supporting C-compiler-efficient instruction set. The high 40 MIPS throughput enables real-time DSP and motor control run-natives, while dual 16-bit timers provide precision event timing. The 28-QFN package includes an exposed thermal pad (EP) for low-theta-JA operation. Power-saving modes include Idle, Sleep, and Doze modes with multiple clock sources (HS, XT, EC, internal FRC).
Typical applications include industrial motor control (BLDC/PMSM), digital power conversion, sensor signal conditioning, and embedded control loops. The wide peripheral set also suits medical HVAC, RFID build, and consumer audio build systems.
When designing with this device, ensure the 3.3V rail is clean with at least 10uF bulk decoupling plus 0.1uF ceramic at each VDD pin. Use the exposed pad (EP) for thermal relief and connect it to ground with multiple thermal vias to maximize power dissipation capability.
This page synthesizes distributor pricing (DigiKey, Mouser, LCSC), drop-in QFN-S-28 alternatives from the PIC24H family and cross-brand pin-compatible equivalents from web search, plus practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: PIC24HJ32GP302T-I/MM — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC24HJ32GP302T-I/MM （同一形状・フットプリント） — 相違点: Operating Temperature, Package, Timers, ADC, I/O Pins.
クイック比較ツール — 並列比較する代替部品を選択:
PIC24HJ32GP302-I/MM
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC24HJ32GP202-E/MM
✅ ドロップイン✓ 在庫あり
$3.6 / 個
データシートを見る →PIC24HJ32GP202-I/SS
✅ ドロップイン✓ 在庫あり
$3.55 / 個
データシートを見る →PIC24HJ32GP204-I/PT
✅ ドロップイン✓ 在庫あり
$3.65 / 個
データシートを見る →PIC24HJ32GP302T-I/MM 最大定格＆電気的特性
| Series | PIC24H |
| Core Architecture | 16-bit PIC |
| Core Size | 16-bit |
| CPU Speed (MIPS) | 40 MIPS |
| Program Memory | 32 KB (11K x 24) Flash |
| 電源電圧 | 3.0 V to 3.6 V |
| 動作温度 | -40C to +85C (Industrial) |
| I/O Pins | 21 |
| Timers | 3 x 16-bit (pairable to one 32-bit) |
| Output Compare | 2 modules |
| UART | 2 modules |
| パッケージ | 28-QFN-S (6x6 mm) with exposed pad |
| 実装タイプ | Surface Mount |
| Clock Speed (Max) | 40 MHz |
| Connectivity | I2C, SPI, UART |
| RoHS ステータス | Compliant |
PIC24HJ32GP302T-I/MM ピン構成
| ピン 1 | MCLR — Master Clear (reset) input, active low |
| ピン 2 | OSC1/RA12 — Oscillator crystal input or GPIO |
| ピン 3 | OSC2/RA13 — Oscillator crystal output or GPIO |
| ピン 4 | RB0/AN0 — GPIO/Analog input 0 |
| ピン 5 | RB1/AN1 — GPIO/Analog input 1 |
| ピン 6 | RB2/AN2 — GPIO/Analog input 2 |
| ピン 7 | RB3/AN3 — GPIO/Analog input 3 |
| ピン 8 | RB4/AN4 — GPIO/Analog input 4 |
| ピン 9 | RB5/AN5 — GPIO/Analog input 5 |
| ピン 10 | RB6/AN6/PGC — GPIO/Analog input 6/ICSP clock |
| ピン 11 | RB7/AN7/PGD — GPIO/Analog input 7/ICSP data |
| ピン 12 | AVDD — Analog supply voltage |
| ピン 13 | AVSS — Analog ground |
| ピン 14 | RC0 — GPIO |
| ピン 15 | RC1 — GPIO |
| ピン 16 | RC2 — GPIO |
| ピン 17 | RC3 — GPIO |
| ピン 18 | RC4 — GPIO |
| ピン 19 | RC5 — GPIO |
| ピン 20 | RC6 — GPIO |
| ピン 21 | RC7 — GPIO |
| ピン 22 | RD0 — GPIO |
| ピン 23 | RD1 — GPIO |
| ピン 24 | VDD — Digital supply voltage |
| ピン 25 | VSS — Digital ground |
| ピン 26 | RA0 — GPIO |
| ピン 27 | RA1 — GPIO |
| ピン 28 | RA2 — GPIO (also serves as CV/EHS-IO on some variants) |
| ピン EP | EP — Exposed thermal pad, connect to ground (GND) with thermal vias |
主な用途
PIC24HJ32GP302T-I/MM の用途: 6 件s: BLDC/PMSM Motor Control, Industrial Sensor Signal Conditioning, Digital Power Conversion (SMPS), Building Automation & HVAC Control, Consumer Audio, DAC and Amplifier Control, Medical Point-of-Care Diagnostic Devices.
BLDC/PMSM Motor Control
The PIC24HJ32GP302T-I/MM fits BLDC and PMSM motor control with 40 MIPS throughput that executes field-oriented control (FOC) and space-vector PWM within microsecond loop times. Its three 16-bit timers (pairable to a 32-bit timer) drive center-aligned PWM via the two Output Compare modules, while the on-chip ADC samples phase currents at the precise PWM midpoint via the PWM-trigger. The 28-QFN-S exposed pad gives low-theta-JA, critical for sustained ADC conversions in motor drive. Pair with an MCP8024 gate driver for complete 3-phase inverter control up to several hundred watts.
おすすめ
Industrial Sensor Signal Conditioning
The PIC24HJ32GP302T-I/MM fits industrial 4-20mA loop-powered sensor signal conditioning with 32 KB Flash that stores calibration tables, linearization curves, and HART protocol state machines. Its 10/12-bit ADC samples bridge sensors, RTDs, and thermocouples, while the hardware multiply accelerates polynomial linearization. The -40C to +85C industrial temperature grade tolerates factory floor environments, and the 28-QFN-S footprint suits compact DIN-rail transmitter modules. Use the UART for HART modem interfacing or RS-485 sensor networks.
おすすめ
Digital Power Conversion (SMPS)
The PIC24HJ32GP302T-I/MM fits digital switch-mode power supply control with 40 MIPS throughput that runs voltage-mode and peak-current-mode control loops at 100+ kHz switching frequencies. Its high-speed ADC samples the output voltage and current at the optimal PWM edge, while the Output Compare modules drive synchronous rectifier PWMs with programmable dead-time insertion. The 28-QFN-S exposed pad handles sustained ADC thermal load during continuous conduction mode. Use the comparator module for cycle-by-cycle current limiting.
おすすめ
Building Automation & HVAC Control
The PIC24HJ32GP302T-I/MM fits building automation HVAC control with 32 KB Flash for control algorithms, scheduling, and BACnet/Modbus protocol handling. Its three 16-bit timers measure pulse-count flow sensors and triac-fired heater elements, while the UART interfaces to RS-485 building automation trunks. The wide -40C to +85C operating range tolerates unconditioned equipment rooms and rooftop units. The 28-QFN-S compact footprint suits wall-thermostat and VAV-box controller PCBs.
おすすめ
Consumer Audio, DAC and Amplifier Control
The PIC24HJ32GP302T-I/MM fits consumer audio products with 40 MIPS throughput that handles USB Audio Class 1.0 enumeration, volume control, and DSP-style audio effects. Its UART interfaces to Bluetooth audio modules, while SPI drives external DACs such as the PCM5102A. The 28-QFN-S 6x6 mm footprint suits compact headphone amplifier and soundbar sub-class products. Pair with the PIC24FJ64GB for USB host/device flexibility, or stay on PIC24H for deterministic audio loop timing.
おすすめ
Medical Point-of-Care Diagnostic Devices
The PIC24HJ32GP302T-I/MM fits medical point-of-care diagnostic devices with 32 KB Flash that runs measurement algorithms for glucose meters, pulse oximeters, and rapid-test readers. Its ADC measures photodiode outputs from colorimetric assays, while timers control LED drive currents with precise duty-cycle modulation. The 28-QFN-S exposed pad gives low thermal rise in continuous-use handheld designs. Note: medical designs require IEC 60730-1/-2 functional safety validation on the firmware, plus RoHS and REACH compliance.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC24HJ32GP302T-I/MM — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC24HJ32GP302-I/MM | PIC24HJ32GP202-E/MM | PIC24HJ32GP202-I/SS | PIC24HJ32GP204-I/PT |
|---|---|---|---|---|---|
| Package | 28-QFN-S (6x6 mm) | 28-QFN-S (6x6 mm) - same | 28-QFN-S (6x6 mm) - same | 28-SSOP - different footprint | 44-TQFP - different footprint |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Program Memory (Flash) | 32 KB | 32 KB - same | 32 KB (16K x 24) - same | 32 KB (16K x 24) - same | 128 KB (+300%) |
| CPU Speed (MIPS) | 40 MIPS | 40 MIPS - same | 40 MIPS - same | 40 MIPS - same | 40 MIPS - same |
| I/O Pins | 21 | 21 - same | 21 - same | 21 - same | 35 (+67%) |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V - same | 3.0 V to 3.6 V - same | 3.0 V to 3.6 V - same | 3.0 V to 3.6 V - same |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C - same | -40C to +125C (Extended) | -40C to +85C - same | -40C to +85C - same |
| Timers | 3 x 16-bit | 3 x 16-bit - same | 3 x 16-bit - same | 3 x 16-bit - same | 5 x 16-bit (+67%) |
主な差別化要因
- Pin-compatible with dsPIC33F family for MCU-to-DSC upgrade path （vs PIC24HJ32GP302-I/MM (T&R variant))
- Industrial -40C to +85C temperature grade in compact QFN-S （vs PIC24HJ32GP202-E/MM (Extended temp variant))
- 32 KB Flash with 40 MIPS gives deterministic DSP performance （vs PIC24HJ32GP204-I/PT (44-TQFP, 128 KB Flash))
設計ノート
Place a 10uF bulk decoupling capacitor near the VDD pin plus a 0.1uF ceramic capacitor as close to the VDD/VSS pair as the PCB layout allows (within 3 mm). For the 28-QFN-S package, route VDD and VSS on adjacent pins to minimize inductance. According to Microchip PIC24H design notes, inadequate decoupling causes Flash programming failures and erratic ADC readings. A ferrite bead between the analog AVDD and digital VDD rails is recommended for ADC accuracy below 12-bit noise floors.
The 28-QFN-S package has an exposed thermal pad (EP, pin 28 in our pinout table) that MUST be soldered to a grounded copper pour of at least 25 mm^2 with multiple thermal vias (8+ vias, 0.3 mm drill) for proper heat dissipation. Without EP soldering, junction temperature can rise 30-40C above ambient at full CPU load, potentially triggering thermal shutdown at 150C. At 40 MIPS with all peripherals active, estimated power consumption is approximately 60 mA from VDD - the EP keeps theta_JA low for sustained operation.
Keep the ICSP clock (PGC, pin 10) and data (PGD, pin 11) traces short and away from switching signals. Per Microchip ICSP design guidelines, add a 4.7 kohm pull-up resistor on MCLR (pin 1) to VDD, and route the ICSP connector near the pins to avoid programming failures. Avoid running PWM signals directly under the QFN package, as this introduces noise into ADC readings via capacitive coupling.
Estimated: Do not apply voltage to any pin before VDD reaches 1.5V - this can cause latch-up via the ESD protection diodes. When using the internal FRC oscillator at 7.37 MHz, enable the PLL with FPLLIDIV=1, FPLLMUL=21 to achieve 40 MIPS, but allow 1 ms lock time before peripheral operation. Common pitfall: leaving the JTAG pins (or alternatively, depending on variant: the alternate function pins) unconfigured - they default to analog input mode, which can cause excess current draw if floating.
コンプライアンス情報
RoHS compliant per Microchip product page. Industrial temperature range -40C to +85C; for extended -40C to +125C, use -E suffix variants. Not AEC-Q100 qualified; PIC24HJ32GP302 family is not automotive-grade.
