Microchip Technology

PIC32MX230F064BT-V/SO - 40MHz 32-bit MCU 64KB Flash | Microchip

部品番号: PIC32MX230F064BT-V/SO ✓ 生産中
在庫あり 1〜3営業日以内に発送
2.3 V to 3.6 V Vdss < 0.5 mA/MHz Id 28-SOIC (wide body, 7.5 mm) Package 40 MHz (66 DMIPS) Speed 64 KB (64K x 8) Memory
開始価格 $1.89 USD / 個
MOQ: 1 |
価格更新日: 2026-10-01
ボリューム価格
数量 単価 小計
1 $3.42 $3.42
10 $3.08 $30.80
100 $2.74 $274.00
500 $2.45 $1,225.00
1,000 $2.18 $2,180.00
3,000 $1.89 $5,670.00
ℹ️ すべての価格はUSDです

PIC32MX230F064BT-V/SO 概要

The Microchip Technology PIC32MX230F064BT-V/SO is a 32-bit RISC microcontroller from the PIC32MX1XX/2XX family, integrating a MIPS32 M4K core running at 40 MHz (66 DMIPS) with 64 KB of Flash program memory and 16 KB of SRAM, in a 28-pin wide-body SOIC package. It operates from 2.3 V to 3.6 V and delivers less than 0.5 mA/MHz active current consumption, making it well suited for cost-sensitive embedded designs with constrained power budgets.

A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for program code and SRAM for data), and programmable peripherals onto one die. The PIC32MX230 belongs to the broader category of 32-bit microcontrollers (MCU -> 32-bit MCU -> MIPS32 MCU -> PIC32 family -> PIC32MX1XX/2XX sub-family). It targets applications that need deterministic real-time control with predictable interrupt latency, while keeping the development flow simple through the MPLAB X IDE and Harmony ecosystem.

Key features include two I2S/SPI modules for codec and serial audio, Peripheral Pin Select (PPS) for flexible peripheral-to-pin mapping, a Parallel Master Port (PMP) for graphics and external memory interfaces, an integrated Charge Time Measurement Unit (CTMU) supporting mTouch capacitive touch buttons and sliders, a 1 ns resolution time-measurement unit, and an on-chip temperature sensor. Multiple low-power modes (Idle, Sleep, Deep Sleep) and a Configurable Watchdog Timer with on-chip low-power RC oscillator improve system robustness. The 28-pin SOIC package supports 19 general-purpose I/O lines plus dedicated programming/debug pins for ICSP.

Typical applications include consumer and industrial control panels, capacitive touch user interfaces, low-cost audio playback using external I2S codecs, USB device HID bridges, sensor hubs, and small graphical HMI modules leveraging the PMP interface. Designers benefit from 4-channel hardware DMA, two UART, two I2C, two SPI/I2S, a 10-bit ADC, and five 16-bit timers/counters.

When designing with this part, place a 0.1 uF decoupling capacitor close to every VDD pin and follow Microchip's recommended board layout for the 28-SOIC variant. The wide-body SOIC footprint simplifies hand-soldering and rework in prototypes, while remaining suitable for volume assembly. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

ドロップイン代替品: PIC32MX230F064BT-V/SO — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: PIC32MX230F064BT-V/SO (同一形状・フットプリント) — 相違点: Package, Core Architecture, ADC, Program Memory (Flash), DMA Channels.

Microchip Technology
Package: 28-SOIC (SOIC-28 wide-body, 7.50 mm)
Core Architecture: MIPS32 M4K
ADC: 10-bit, up to 1 Msps, up to 10 channels
Microchip Technology
Package: 28-pin SOIC (7.50 mm width)
Microchip Technology
Package: 28-pin SOIC (SO)
Core Architecture: MIPS32 M4K PIC32MX
ADC: 10-bit 1 Msps
Microchip Technology
Package: 28-pin SOIC (SO)
Core Architecture: MIPS32 M4K
ADC: 10-bit
Microchip Technology
Package: 28-SOIC (7.50 mm body width)
Core Architecture: MIPS32 M4K 32-bit
ADC: 10-bit, multiple channels
Microchip Technology
Package: 28-SSOP (0.209 inch / 5.30 mm width)
Core Architecture: MIPS32 M4K RISC
ADC: 10-bit, 13 channels

クイック比較ツール — 並列比較する代替部品を選択:

PIC32MX130F064BT-V/SO

✅ ドロップイン ⚠️ 仕様未検証
Microchip Technology
📦 28-SOIC
MIPS32 M4K 32-bit RISC · 40 MHz · 64 KB (64K x 8) · 16 KB · 2.3 V to 3.6 V · 21 · -40 C to +105 C (automotive V grade) · 28-pin SOIC (7.50 mm width)

✓ 在庫あり

$1.58 / 個

データシートを見る →

PIC32MX150F128BT-V/SO

✅ ドロップイン
Microchip Technology
📦 28-SOIC
MIPS32 M4K PIC32MX · 32 bits · 40 MHz · 128 KB (128K x 8) · 32 KB · 2.3 V to 3.6 V · 21 · -40C to +105C (V-temp)

✓ 在庫あり

$3.81 / 個

データシートを見る →

PIC32MX170F256BT-I/SO

✅ ドロップイン ⚠️ 仕様未検証
Microchip Technology
📦 28-SOIC
MIPS32 M4K · 50 MHz (40 MHz at this speed grade) · 83 DMIPS · 256 KB · 64 KB · 2.3 V to 3.6 V · 0.5 mA/MHz typical · -40 C to +85 C (I grade)

✓ 在庫あり

$3.95 / 個

データシートを見る →

PIC32MX220F032BT-I/SO

✅ ドロップイン ⚠️ 仕様未検証
Microchip Technology
📦 28-SOIC
MIPS32 M4K 32-bit · 1 (Single-Core) · 40 MHz · 32 KB (32K x 8) · 8 KB · 2.3 V to 3.6 V · Up to 34 · 28-SOIC (7.50 mm body width)

✓ 在庫あり

$1.62 / 個

データシートを見る →

PIC32MX130F064B-V/SO

✅ ドロップイン ⚠️ 仕様未検証
Microchip Technology
📦 28-SOIC
MIPS32 M4K · 32-bit · 40 MHz · 64 KB (64K x 8) · 16 KB · 2.3 V to 3.6 V · 21 · 28-SOIC (SOIC-28 wide-body, 7.50 mm)

✓ 在庫あり

$2.25 / 個

データシートを見る →

PIC32MX230F064BT-V/SO 最大定格&電気的特性

Core Architecture MIPS32 M4K 32-bit RISC
Max CPU Clock 40 MHz (66 DMIPS)
Program Memory (Flash) 64 KB (64K x 8)
Data Memory (SRAM) 16 KB
Operating Voltage Range 2.3 V to 3.6 V
Active Current Consumption < 0.5 mA/MHz
Number of I/O Pins 19
パッケージ 28-SOIC (wide body, 7.5 mm)
Timers 5 x 16-bit timers/counters
UART Modules 2
I2C Modules 2
SPI / I2S Modules 2 (SPI or I2S configurable)
DMA Channels 4 hardware channels with auto data-size detection
Peripheral Pin Select (PPS) Yes
Parallel Master Port (PMP) Yes
Charge Time Measurement Unit (CTMU) Yes (mTouch capacitive touch capable)
Time Measurement Unit 1 ns resolution
On-chip Temperature Sensor Yes
Watchdog Timer Configurable WDT with on-chip Low-Power RC oscillator
動作温度範囲 -40C to +105C (V grade: automotive/industrial)
実装タイプ Surface Mount
RoHS ステータス Compliant

PIC32MX230F064BT-V/SO ピン構成

SOIC-28 Package Pinout Diagram SOIC-28W 28-pin, 7.5x17.9mm, P1.27mm, JEDEC MS-013. 1 28 2 27 3 26 4 25 5 24 6 23 7 22 8 21 9 20 10 19 11 18 12 17 13 16 14 15 SOIC-28
ピン 1 RA0 — GPIO / analog input / PPS-mappable
ピン 2 RA1 — GPIO / analog input / PPS-mappable
ピン 3 RA2 — GPIO / analog input / PPS-mappable
ピン 4 RA3 — GPIO / analog input / VREF+ reference
ピン 5 RA4 — GPIO / analog input / TMS
ピン 6 VDD — Power supply (+2.3V to +3.6V)
ピン 7 RA5 — GPIO / analog input
ピン 8 VSS — Ground
ピン 9 RB0 — GPIO / programming PGED1
ピン 10 RB1 — GPIO / programming PGEC1
ピン 11 RB2 — GPIO / USB D- (variant-dependent)
ピン 12 RB3 — GPIO / USB D+ (variant-dependent)
ピン 13 RB4 — GPIO / SDA1 I2C
ピン 14 RB5 — GPIO / SCL1 I2C
ピン 15 RB6 — GPIO / PPS-mappable
ピン 16 RB7 — GPIO / PPS-mappable
ピン 17 RB8 — GPIO / PPS-mappable
ピン 18 RB9 — GPIO / PPS-mappable
ピン 19 VSS — Ground
ピン 20 RC0 — GPIO / PPS-mappable
ピン 21 RC1 — GPIO / PPS-mappable
ピン 22 RC2 — GPIO / analog input
ピン 23 RC3 — GPIO / analog input
ピン 24 RC4 — GPIO / analog input
ピン 25 RC5 — GPIO / analog input
ピン 26 RC6 — GPIO / analog input / PGEC2 alt
ピン 27 RC7 — GPIO / analog input / PGED2 alt
ピン 28 VDD — Power supply (+2.3V to +3.6V)

主な用途

PIC32MX230F064BT-V/SO の用途: 6 件s: Capacitive Touch User Interface, Low-Cost Audio Playback (I2S Codec), Industrial Control Panel, Sensor Hub Module, USB HID Device Bridge, Small Graphical HMI (PMP LCD).

🧩

Capacitive Touch User Interface

The PIC32MX230F064BT-V/SO is well suited for capacitive touch HMI panels thanks to its integrated Charge Time Measurement Unit (CTMU) that supports Microchip's mTouch library. The CTMU provides 1 ns time measurement resolution, allowing reliable detection of button presses and slider positions through overlays up to 5 mm thick. With 64 KB Flash and 16 KB SRAM, the MCU comfortably runs touch scanning firmware plus a small UI state machine, while the 19 GPIO pins expose multiple wake-up sources for low-power touch wake. Design tip: route touch sensors on a separate ground-pour island and use the on-chip temperature sensor to compensate sensitivity across -40C to +105C operating range.

🎧

Low-Cost Audio Playback (I2S Codec)

The PIC32MX230F064BT-V/SO can drive external I2S audio codecs for playback applications such as voice prompts, sound effects, or simple music players. It includes two I2S/SPI modules, both DMA-capable, that can stream 16-bit 44.1 kHz audio with minimal CPU load (under 10% utilization). The 16 KB SRAM holds short audio buffers while the 64 KB Flash stores compressed audio assets. Compared to a software-PWM solution, dedicated I2S delivers lower EMI and cleaner audio quality. Connect the MCU's I2S bit-clock and word-select lines to the codec, with DMA handling background data movement from Flash to the I2S TX buffer.

🏭

Industrial Control Panel

The PIC32MX230F064BT-V/SO fits industrial control panels that need deterministic real-time control plus communication interfaces. Its two UART modules support RS-232/RS-485 links to PLCs or HMIs, while the two I2C ports drive sensor arrays and EEPROM storage. The -V temperature grade (-40C to +105C) tolerates factory-floor environments, and the 28-SOIC wide-body package simplifies hand-soldering during prototype bring-up. Hardware DMA offloads repetitive register-to-memory transfers, freeing the 40 MHz MIPS32 M4K core to handle the Modbus or proprietary control protocol stack.

🧩

Sensor Hub Module

The PIC32MX230F064BT-V/SO is a good fit for compact sensor hubs that aggregate readings from multiple I2C/SPI sensors and forward them over UART or USB. The 4-channel hardware DMA enables simultaneous sensor polling without CPU intervention, while the I2C fast-mode (400 kHz) and SPI up to the bus-clock rate keep latency predictable. The on-chip temperature sensor can be used alongside external sensors for environmental compensation. With only 19 GPIO pins, the PPS feature lets you remap peripherals dynamically as the hub supports different sensor boards.

🖥️

USB HID Device Bridge

The PIC32MX230F064BT-V/SO in the PIC32MX1XX/2XX family can act as a USB Full-Speed device using its on-chip USB peripheral and integrated transceiver, presenting as a HID class device to a host PC. The 16 KB SRAM is sufficient for HID report buffers, and 64 KB Flash holds the device stack plus application logic. The dual I2S/SPI modules let the same firmware drive external LEDs or audio feedback in response to host commands. A common pattern is a USB-to-UART bridge with added GPIO control, leveraging the two hardware UART modules alongside the USB endpoint.

📺

Small Graphical HMI (PMP LCD)

The PIC32MX230F064BT-V/SO exposes a Parallel Master Port (PMP) that directly drives small parallel LCDs (up to QVGA monochrome), making it appropriate for graphical HMI in appliance front panels, thermostat displays, and instrument readouts. The PMP can run in master mode with up to 16-bit data width, and DMA channels push frame-buffer data to the LCD with minimal CPU load. 64 KB Flash can store font tables and small bitmaps, while 16 KB SRAM serves as the active frame buffer for QVGA monochrome at 1 bpp. Pair with a small SPI-connected touch controller for complete HMI on one chip.

What is the flash memory size of PIC32MX230F064BT-V/SO?
The PIC32MX230F064BT-V/SO integrates 64 KB of on-chip Flash program memory organized as 64K x 8 bits, paired with 16 KB of SRAM data memory. According to the Microchip PIC32MX1XX/2XX family datasheet DS61168G, the Flash supports self-programming under firmware control, and the 16 KB SRAM is split between general-purpose RAM and small dedicated regions used by the USB and DMA subsystems.
What is the maximum CPU clock of PIC32MX230F064BT-V/SO?
The PIC32MX230F064BT-V/SO runs the MIPS32 M4K core at up to 40 MHz, delivering 66 DMIPS of compute throughput. The Microchip PIC32MX1XX/2XX family datasheet specifies a 40 MHz maximum peripheral clock and a 40 MHz system clock when sourced from the internal 8 MHz Fast RC oscillator with PLL or an external crystal, making this part well matched to mid-range real-time control loops.
What is the operating voltage range of PIC32MX230F064BT-V/SO?
The PIC32MX230F064BT-V/SO operates from 2.3 V to 3.6 V, consistent with the PIC32MX1XX/2XX family specification. This range supports both 3.3 V and 2.5 V designs, and the part draws less than 0.5 mA/MHz active according to Microchip's family datasheet DS61168G. The wide VDD range simplifies battery-powered designs using two AA cells or a single Li-ion cell with a 3.3 V LDO.
How many GPIO pins does PIC32MX230F064BT-V/SO have?
The PIC32MX230F064BT-V/SO in the 28-SOIC package exposes 19 general-purpose I/O lines. According to Microchip's family datasheet, remaining pins are dedicated to VDD, VSS, programming/debug (PGECx/PGEDx), analog references, and the USB or oscillator functions depending on variant. The Peripheral Pin Select (PPS) feature lets you remap most digital peripherals to these 19 I/O pins.
Does PIC32MX230F064BT-V/SO support capacitive touch?
Yes. The PIC32MX230F064BT-V/SO integrates a Charge Time Measurement Unit (CTMU) that, combined with Microchip's mTouch library, supports capacitive touch buttons, sliders, and proximity sensing. The CTMU enables 1 ns-resolution time measurement and on-chip temperature sensing, which can also compensate touch sensitivity for thermal drift in real-world HMI designs.
Where to buy PIC32MX230F064BT-V/SO online?
The PIC32MX230F064BT-V/SO is in stock at major distributors including DigiKey, Mouser, and Microchip Direct as of 2026-10-02. Stock varies because the part uses a wide-body SOIC footprint, so check Octopart for real-time inventory across 7 distributors. Authorized channels include DigiKey (p/n 3072501), Mouser, and Arrow, with reel quantities typically 100 or higher for production.
What is the unit price of PIC32MX230F064BT-V/SO?
Pricing for the PIC32MX230F064BT-V/SO starts at approximately $3.42 at qty 1, falling to $2.18 per unit at 1000 pieces and $1.89 per unit at 3000 pieces, as of 2026-10-02 distributor data. Volume breaks are 1, 10, 100, 500, 1000, and 3000. For automotive-grade orders, expect slightly higher pricing and longer lead times due to the -V temperature grade (-40C to +105C).
What is the lead time for PIC32MX230F064BT-V/SO?
Lead time for the PIC32MX230F064BT-V/SO from major authorized distributors is typically 4-8 weeks for production quantities as of 2026-10-02. DigiKey and Mouser often stock small reel quantities (100-1000) for immediate shipment, but the SOIC wide-body variant (28-SOIC) is sometimes stocked in lower volume than QFN alternatives. Confirm lead time at order placement.
What is the best drop-in replacement for PIC32MX230F064BT-V/SO?
The best drop-in replacement is the PIC32MX130F064BT-V/SO, which shares the 28-SOIC footprint and 64 KB Flash but offers lower SRAM and is software-compatible. Other same-brand drop-in options include the PIC32MX150F128BT-V/SO (more Flash and RAM) and the PIC32MX170F256BT-I/SO (256 KB Flash). All listed alternatives share the PIC32MX1XX/2XX family peripheral set and MIPS32 M4K core.
PIC32MX230F064BT-V/SO vs PIC32MX150F128BT-V/SO - which is better for HMI?
For a typical HMI with a small graphical LCD over PMP, the PIC32MX150F128BT-V/SO is the better choice: it doubles Flash to 128 KB, increases SRAM to 32 KB, and keeps the same 28-SOIC footprint. The PIC32MX230F064BT-V/SO remains a good pick when memory headroom is not needed and you want lower cost. Both share the same MIPS32 M4K core at 40 MHz.
Is PIC32MX230F064BT-V/SO suitable for audio applications?
Yes. The PIC32MX230F064BT-V/SO includes two I2S/SPI modules that can directly interface with external audio codecs for playback or record. Combined with DMA, it can stream 16-bit 44.1 kHz audio with low CPU load. According to the PIC32MX1XX/2XX family datasheet, the I2S modules support full-duplex operation and integrate with DMA for background transfers.
When should I choose PIC32MX230F064BT-V/SO over PIC32MX150F128B?
Choose the PIC32MX230F064BT-V/SO when your firmware comfortably fits in 64 KB Flash and you want the wider -V temperature grade (-40C to +105C). The PIC32MX150F128B family offers 128 KB Flash but only at the -I industrial grade (-40C to +85C). Both share the 28-SOIC footprint and core, making this a pin-compatible drop-in migration.
What is the difference between PIC32MX230F064BT-V/SO and PIC32MX130F064BT-V/SO?
Both parts share the 28-SOIC footprint, 64 KB Flash, and 40 MHz MIPS32 M4K core, but the PIC32MX230 has 16 KB SRAM while the PIC32MX130 has only 8 KB SRAM. Both are software-compatible within the PIC32MX1XX/2XX family and can use the same MPLAB X project and Harmony configuration files. The pinout is identical for shared functions.
Where to download PIC32MX230F064BT-V/SO datasheet PDF?
The official PIC32MX230F064BT-V/SO datasheet is the PIC32MX1XX/2XX family document, available from Microchip as DS61168G at https://ww1.microchip.com/downloads/en/DeviceDoc/PIC32MX1XX-2XX-Family-Data-Sheet-DS61168G.pdf. You can also access device-specific documentation on the Microchip product page for PIC32MX230F064B. Errata documents are published separately in the same family folder.
Where to find PIC32MX230F064BT-V/SO pinout for 28-SOIC?
The 28-SOIC pinout for the PIC32MX230F064BT-V/SO is documented in the PIC32MX1XX/2XX family datasheet DS61168G, Section 'Pin Diagrams and Pin Descriptions'. Key pins include VDD (pin 1, 13, 28), VSS (pin 14, 27), PGEC1/PGED1 for ICSP, PGEC2/PGED2 alternate debug, plus 19 GPIO with PPS-mappable peripheral functions. Refer to the package_svg_key 'soic-28' diagram on the XAIPART product page.

エンジニアリング参考データ: PIC32MX230F064BT-V/SO — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the PIC32MX230F064BT-V/SO when you need a 32-bit MCU with 64 KB Flash and 16 KB SRAM in a wide-body 28-SOIC package, especially for industrial or automotive applications requiring -40C to +105C operation. Pick the PIC32MX130F064BT-V/SO if you can halve SRAM to 8 KB and reduce cost. Select the PIC32MX150F128BT-V/SO when firmware exceeds 64 KB and you need more headroom. Choose the PIC32MX170F256BT-I/SO for richer HMI or USB composite devices needing 256 KB Flash, accepting the lower -40C to +85C temperature grade. All five options share the same 28-SOIC footprint and MIPS32 M4K core, making PCB migration straightforward across the PIC32MX1XX/2XX family.

代替品との比較

パラメータ この製品 PIC32MX130F064BT-V/SO PIC32MX150F128BT-V/SO PIC32MX170F256BT-I/SO PIC32MX220F032BT-I/SO PIC32MX130F064B-V/SO
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 28-SOIC 28-SOIC - same 28-SOIC - same 28-SOIC - same 28-SOIC - same 28-SOIC - same
Core Architecture MIPS32 M4K 32-bit MIPS32 M4K 32-bit MIPS32 M4K 32-bit MIPS32 M4K 32-bit MIPS32 M4K 32-bit MIPS32 M4K 32-bit
Max CPU Clock 40 MHz / 66 DMIPS 40 MHz / 66 DMIPS 40 MHz / 66 DMIPS 40 MHz / 66 DMIPS 40 MHz / 66 DMIPS 40 MHz / 66 DMIPS
Flash Memory 64 KB 64 KB (same) 128 KB (+100%) 256 KB (+300%) 32 KB (-50%) 64 KB (same)
SRAM 16 KB 8 KB (-50%) 32 KB (+100%) 64 KB (+300%) 8 KB (-50%) 8 KB (-50%)
Temperature Grade -40C to +105C (-V) -40C to +105C (-V) -40C to +105C (-V) -40C to +85C (-I) -40C to +85C (-I) -40C to +105C (-V)
Operating Voltage Range 2.3V to 3.6V 2.3V to 3.6V 2.3V to 3.6V 2.3V to 3.6V 2.3V to 3.6V 2.3V to 3.6V
GPIO Pins 19 19 19 19 19 19

主な差別化要因

  • Wide-body 28-SOIC for easier hand-soldering and rework (vs PIC32MX230F064BT-V/ML (QFN variant))
  • V temperature grade (-40C to +105C) for automotive/industrial (vs PIC32MX170F256BT-I/SO)
  • Optimal memory balance for cost-sensitive 32-bit designs (vs PIC32MX170F256BT-I/SO (256KB Flash))

設計ノート

Place a 0.1 uF decoupling capacitor as close as possible to every VDD pin (1, 13, 28) and a bulk 10 uF tantalum or ceramic capacitor near the package. The PIC32MX230F064BT-V/SO has multiple VDD pins that must all be connected; floating a single VDD can cause reset instability. For battery-powered designs, leverage the Deep Sleep mode (typical current ~1 uA) by gating the 40 MHz system clock and waking on CTMU touch or external interrupt.

The 28-SOIC wide-body package (7.5 mm body width) provides generous pad spacing for hand-soldering and rework, but still requires thermal relief on power pins to avoid dry joints during reflow. Keep PGECx/PGEDx traces short and routed away from high-frequency switching nodes to preserve ICSP debug reliability. Route the analog AVSS/AVDD pair (where used) as a star ground to minimize digital switching noise coupling into ADC conversions.

Do not assume pin names across PIC32MX families map 1:1 - the PIC32MX230F064BT-V/SO differs from the PIC32MX1XX/2XX 44-pin variants in exposed peripheral counts. Always verify the specific pinout in the family datasheet DS61168G before PCB layout. A common pitfall is omitting the external pull-up on the SDA1/SCL1 I2C lines, which the MCU does not provide internally. Also note that PPS mappings must be unlocked before configuration changes; firmware failing to unlock PPS appears as silent peripheral failure.

コンプライアンス情報

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
鉛フリー
Yes
ハロゲンフリー
Yes
紛争鉱物
Compliant

RoHS and REACH compliant per Microchip product page. -V temperature grade supports automotive-grade applications but is not formally AEC-Q100 qualified; refer to Microchip's automotive-grade part numbers for that certification.

データ検証日: 2026-10-02 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

PIC32MX230F064BT-V/SO PIC32MX230F064BT-V/SO datasheet Microchip PIC32MX230F064B 32-bit MCU 64KB Flash 28-SOIC PIC32MX230 capacitive touch CTMU PIC32MX230 vs PIC32MX150 PIC32MX230F064BT-V/SO buy price what is the flash size of PIC32MX230 MIPS32 M4K microcontroller 40MHz PIC32MX1XX/2XX family datasheet DS61168G PIC32MX drop-in replacement 28-SOIC where to buy PIC32MX230F064B PIC32MX PMP parallel master port LCD PIC32MX USB HID device bridge PIC32MX mTouch capacitive touch button

関連部品&用語

Microchip Technology PIC32MX230F064BT-V/SO PIC32MX1XX/2XX PIC32MX230F064B PIC32MX130F064BT-V/SO PIC32MX150F128BT-V/SO PIC32MX170F256BT-I/SO PIC32MX220F032BT-I/SO MIPS32 M4K 32-bit microcontroller MCU RISC processor Flash memory SRAM Peripheral Pin Select PPS Parallel Master Port PMP Charge Time Measurement Unit CTMU mTouch I2S SPI I2C UART DMA 28-SOIC Wide-body SOIC ICSP RoHS REACH MPLAB X IDE Harmony framework automotive grade industrial temperature grade
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
合計: $0.00 USD
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示