PIC32MX430F064H-I/RG - 100MHz 32-bit MCU 64KB Flash | Microchip
部品番号: PIC32MX430F064H-I/RG ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $4.92 | $4.92 |
| 10 | $4.43 | $44.30 |
| 100 | $3.78 | $378.00 |
| 500 | $3.42 | $1,710.00 |
| 1,000 | $3.05 | $3,050.00 |
PIC32MX430F064H-I/RG 概要
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, timers, communication peripherals, and I/O on one silicon die. The PIC32MX family sits in the hierarchy MIPS32 core -> 32-bit MCU -> embedded microcontroller -> semiconductor IC, and the MX3/4 sub-family targets cost-sensitive industrial and consumer applications needing USB connectivity and ample analog integration.
Key features of the PIC32MX430F064H include 64 KB program Flash with self-programmability, 16 KB SRAM, an 8-channel 10-bit ADC, five 16-bit timers/counters, a real-time clock with alarm, and a USB 2.0 full-speed device controller with internal pull-up. The 5V-tolerant I/O simplifies interfacing to legacy 5V logic without level shifters, and the 49 available I/O pins offer generous connectivity in the compact 64-VQFN.
Architecturally the M4K pipeline executes up to 150 DMIPS at 120 MHz, with single-cycle multiplication and hardware multiply-accumulate support. The internal 8 MHz Fast RC oscillator with PLL provides flexible clocking while reducing external BOM cost. The device operates from 2.3V to 3.6V and is industrial-temperature graded from -40C to +85C.
Typical applications include USB peripherals, industrial control panels, sensor hubs, low-cost graphical HMI, and small embedded data loggers. The combination of USB device, ample RAM, and 64-VQFN footprint suits space-constrained industrial boards.
When designing with this board, pay attention to decoupling - place 100 nF ceramic capacitors on every VDD/VSS pair and a bulk 4.7 uF near the regulator. Use the JTAG retention clock and trace practice to avoid EMI on the USB DP/DM lines, and ensure the VBUS pin sees 5V tolerant input as documented in the device datasheet.
This page synthesizes distributor stock and pricing, same-package drop-in alternatives from the PIC32MX family, and practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: PIC32MX430F064H-I/RG — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC32MX430F064H-I/RG （同一形状・フットプリント） — 相違点: ADC, Operating Temperature, Package, Core Architecture, Mounting Type.
クイック比較ツール — 並列比較する代替部品を選択:
PIC32MX450F064H-I/RG
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC32MX350F128H-I/RG
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC32MX370F512H-I/RG
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC32MX330F064H-I/RG
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC32MX450F256H-I/RG
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC32MX430F064H-I/RG 最大定格＆電気的特性
| Core Architecture | MIPS32 M4K 32-bit RISC |
| Maximum CPU Clock | 100 MHz (also offered at 120 MHz speed grade) |
| DMIPS | 150 DMIPS at 120 MHz |
| Program Flash | 64 KB (64K x 8) |
| SRAM | 16 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| I/O Pins | 49 |
| ADC | 10-bit, up to 1 Msps, 16 channels |
| USB | USB 2.0 Full-Speed Device with internal pull-up |
| SPI / I2S | 2 modules |
| I2C | 2 modules |
| UART | 5 modules (supports LIN, RS-232, RS-485) |
| Timers | 5 x 16-bit timers/counters |
| パッケージ | 64-VQFN (RG), 9x9 mm |
| 実装タイプ | Surface Mount |
| 動作温度 | -40C to +85C (Industrial) |
| RoHS ステータス | Compliant |
PIC32MX430F064H-I/RG ピン構成
| ピン 1 | RB15 — General purpose I/O / PMP data |
| ピン 2 | RB14 — General purpose I/O |
| ピン 3 | RB13 — General purpose I/O |
| ピン 4 | RB12 — General purpose I/O |
| ピン 5 | RB11 — General purpose I/O |
| ピン 6 | RB10 — General purpose I/O |
| ピン 7 | RB9 — General purpose I/O |
| ピン 8 | RB8 — General purpose I/O |
| ピン 9 | RB7 — General purpose I/O |
| ピン 10 | RB6 — General purpose I/O / ICD-PGC |
| ピン 11 | RB5 — General purpose I/O / ICD-PGD |
| ピン 12 | RB4 — General purpose I/O |
| ピン 13 | RB3 — General purpose I/O |
| ピン 14 | RB2 — General purpose I/O |
| ピン 15 | RB1 — General purpose I/O |
| ピン 16 | RB0 — General purpose I/O / Programmer |
| ピン 17 | AVDD — Analog VDD (+3.3V) |
| ピン 18 | AVSS — Analog VSS (ground) |
| ピン 19 | RA0 — Analog input / GPIO |
| ピン 20 | RA1 — Analog input / GPIO |
| ピン 21 | RA2 — Analog input / GPIO |
| ピン 22 | RA3 — Analog input / GPIO |
| ピン 23 | RA4 — Analog input / GPIO |
| ピン 24 | RA5 — Analog input / GPIO |
| ピン 25 | RA6 — GPIO |
| ピン 26 | RA7 — GPIO |
| ピン 27 | RA8 — GPIO |
| ピン 28 | RA9 — GPIO |
| ピン 29 | RA10 — GPIO |
| ピン 30 | VBUS — USB VBUS detect (5V) |
| ピン 31 | VDD — Digital VDD (+3.3V) |
| ピン 32 | VSS — Digital ground |
| ピン 33 | D+ — USB D+ data line |
| ピン 34 | D- — USB D- data line |
| ピン 35 | RC1 — GPIO |
| ピン 36 | RC2 — GPIO |
| ピン 37 | RC3 — GPIO |
| ピン 38 | RC4 — GPIO |
| ピン 39 | OSC1 — Crystal oscillator input |
| ピン 40 | OSC2 — Crystal oscillator output |
| ピン 41 | VDD — Digital VDD (+3.3V) |
| ピン 42 | VSS — Digital ground |
| ピン 43 | RC13 — GPIO |
| ピン 44 | RC14 — GPIO / SOSCO |
| ピン 45 | RC15 — GPIO / SOSCI |
| ピン 46 | RD0 — GPIO / PMP |
| ピン 47 | RD1 — GPIO / PMP |
| ピン 48 | RD2 — GPIO / PMP |
| ピン 49 | RD3 — GPIO / PMP |
| ピン 50 | RD4 — GPIO / PMP |
| ピン 51 | RD5 — GPIO / PMP |
| ピン 52 | RD6 — GPIO / PMP |
| ピン 53 | RD7 — GPIO / PMP |
| ピン 54 | RD8 — GPIO / PMP |
| ピン 55 | RD9 — GPIO / PMP |
| ピン 56 | RD10 — GPIO / PMP |
| ピン 57 | RD11 — GPIO / PMP |
| ピン 58 | RD12 — GPIO / PMP |
| ピン 59 | RD13 — GPIO / PMP |
| ピン 60 | RD14 — GPIO / PMP |
| ピン 61 | RD15 — GPIO / PMP |
| ピン 62 | RF0 — GPIO |
| ピン 63 | RF1 — GPIO |
| ピン 64 | EP — Exposed thermal pad (connect to VSS) |
主な用途
PIC32MX430F064H-I/RG の用途: 6 件s: USB HID Peripheral Devices, Industrial Control Panels, Sensor Data Loggers, USB-to-UART Bridge Modules, Low-Cost Graphical Displays, Battery-Powered IoT Edge Nodes.
USB HID Peripheral Devices
The PIC32MX430F064H-I/RG suits USB HID peripherals thanks to its integrated USB 2.0 Full-Speed device controller with internal pull-up and 16 KB SRAM. The 100 MHz MIPS32 M4K core handles HID report processing without external PHY, while 64 KB Flash accommodates USB stack and application logic. The 5V-tolerant I/O simplifies interfacing to legacy 5V keyboard/joystick matrices, and the 49 available I/O support encoder and button arrays in compact hardware products.
おすすめ
Industrial Control Panels
The PIC32MX430F064H-I/RG fits industrial HMI panels with its 16-channel 10-bit ADC, five UART for sensor and fieldbus connectivity, and 5V-tolerant I/O for legacy interfaces. The 64 KB Flash stores graphical and protocol stacks, while 16 KB SRAM handles Modbus RTU buffers. Operating range -40C to +85C supports factory-floor deployment without additional thermal management, and 49 I/O drive segmented LCDs or LED status rows directly.
おすすめ
Sensor Data Loggers
The PIC32MX430F064H-I/RG handles low-power sensor logging thanks to its 16 KB SRAM buffering, USB 2.0 FS device for direct file export, and 5 UART for multi-sensor aggregation. The 10-bit ADC at 1 Msps captures fast transients, while the RTC with calendar time-stamps every record. Industrial temperature range permits unattended logging outdoors, and the 64-VQFN footprint fits miniature battery-powered enclosures with USB charging.
おすすめ
USB-to-UART Bridge Modules
The PIC32MX430F064H-I/RG serves as a flexible USB-to-UART/USB-to-SPI bridge with its USB 2.0 device and five UART peripherals. The 100 MHz M4K core converts protocols at high baud rates, while 16 KB SRAM holds buffer states and 64 KB Flash stores configurable CDC or vendor-class firmware. The 5V-tolerant I/O and the VQFN-64 footprint make this part suitable for compact adapter PCBs.
おすすめ
Low-Cost Graphical Displays
The PIC32MX430F064H-I/RG drives small TFT or OLED graphical displays using its Parallel Master Port for high-throughput pixel data and 16 KB SRAM for frame buffers. The 100 MHz core refreshes small QVGA panels without DMA starvation, and 64 KB Flash holds the font table plus UI logic. USB device enables configuration and firmware update without an external programmer.
おすすめ
Battery-Powered IoT Edge Nodes
The PIC32MX430F064H-I/RG operates in IoT edge nodes with its integrated USB device for direct battery charging and 16-channel ADC for sensor reading. The 2.3V to 3.6V supply suits 3.3V Li-Po cells, while 16 KB SRAM stores local analytics before USB-synchronized upload. The 49 I/O accommodates wake-source buttons and status LEDs, and the industrial temperature range permits outdoor sensor deployments.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC32MX430F064H-I/RG — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC32MX450F064H-I/RG | PIC32MX350F128H-I/RG | PIC32MX370F512H-I/RG | PIC32MX330F064H-I/RG | PIC32MX450F256H-I/RG |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | VQFN-64 (RG) 9x9 mm | VQFN-64 (RG) 9x9 mm - same | VQFN-64 (RG) 9x9 mm - same | VQFN-64 (RG) 9x9 mm - same | VQFN-64 (RG) 9x9 mm - same | VQFN-64 (RG) 9x9 mm - same |
| Core Architecture | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K |
| Maximum CPU Clock | 100 MHz | 120 MHz | 100 MHz | 100 MHz | 100 MHz | 120 MHz |
| Program Flash | 64 KB | 64 KB | 128 KB | 512 KB | 64 KB | 256 KB |
| SRAM | 16 KB | 16 KB | 32 KB | 128 KB | 12 KB | 64 KB |
| USB 2.0 Device | Yes (FS, internal pull-up) | Yes (FS, internal pull-up) | Yes (FS, internal pull-up) | Yes (FS, internal pull-up) | No | Yes (FS, internal pull-up) |
| ADC Channels / Resolution | 16 / 10-bit | 16 / 10-bit | 16 / 10-bit | 16 / 10-bit | 16 / 10-bit | 16 / 10-bit |
| UART Modules | 5 | 5 | 5 | 5 | 5 | 5 |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
主な差別化要因
- USB 2.0 FS device with internal pull-up at 100 MHz （vs PIC32MX330F064H-I/RG)
- Lower-cost 100 MHz industrial temperature grade （vs PIC32MX450F064H-I/RG)
- Same VQFN-64 pinout as the entire MX330/350/370/430/450 family （vs PIC32MX370F512H-I/RG)
設計ノート
Place one 100 nF ceramic decoupling capacitor on every VDD/VSS pair and a 4.7 uF bulk cap within 1 cm of the IC. The USB VBUS pin must see 5V-tolerant input as documented in the device datasheet; use a resistor divider or ferrite bead if the source is not 5V. Decoupling ensures clean USB DP/DM signaling and prevents VDD droop during USB enumeration.
Route the USB DP/DM lines as a 90 ohm differential pair with matched length and continuous reference plane to the IC GND. Place the 27 ohm series resistors close to the IC pins per the device datasheet. The exposed thermal pad must be soldered to a continuous copper pour connected to VSS to provide the thermal and electrical return path.
Do not skip the 0.1 uF bypass cap on the AVDD/AVSS analog supply pair even if analog inputs are not used. Configure unused I/O as outputs low to minimize supply current. When migrating from the PIC32MX330F064H-I/RG (no USB), verify firmware does not rely on the USB module registers since the USB peripheral is not present in the 330 variant.
Estimated: The 100 MHz CPU clock produces 10 ns rise times on GPIO; if driving long traces or capacitive loads, add a 33 ohm series resistor to dampen reflections. Keep crystal traces short (<10 mm) and guard with a GND ring to avoid coupling into the USB DP/DM lines or ADC analog inputs.
コンプライアンス情報
RoHS compliant per Microchip product page. Industrial temperature grade -40C to +85C; not AEC-Q100 qualified - choose PIC32MX430F064H automotive grade variant for automotive applications.
