PIC32MX470F512H-I/MR - 32-bit 100MHz MCU 512KB Flash 64-QFN | Microchip
部品番号: PIC32MX470F512H-I/MR ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $7.95 | $7.95 |
| 10 | $7.16 | $71.60 |
| 100 | $6.36 | $636.00 |
| 500 | $5.72 | $2,860.00 |
| 1,000 | $5.08 | $5,080.00 |
PIC32MX470F512H-I/MR 概要
A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals. The PIC32MX470 belongs to the broader 32-bit MCU category (32-bit -> microcontroller -> embedded processor -> semiconductor), built on the MIPS32 M4K core architecture. This family balances high performance (120 MHz / 150 DMIPS capable on the -120 speed grade) with low cost, targeting consumer, industrial, and USB-enabled embedded designs.
Key features include 120 MHz maximum CPU clock on the -120 speed grade, hardware multiplier/divider, a Charge Time Measurement Unit (CTMU) for touch sensing, a Real-Time Clock Calendar (RTCC), five 16-bit timers/counters, and operation from 2.3V to 3.6V across the industrial -40°C to +105°C temperature range. The 64-QFN MR package provides a low-profile 9x9 mm footprint suitable for compact USB and HMI boards.
Typical applications include USB Audio/Class-D devices, color TFT HMI panels with PMP-driven LCDs, capacitive touch sensing using CTMU, USB HID peripherals such as keyboards and game controllers, industrial control with USB-CDC bridge, and low-cost graphics terminals. The combination of 512 KB Flash and USB OTG makes it well-suited to firmware-upgradable USB products.
When designing with this device, ensure the USB VBUS pin is correctly conditioned per USB 2.0 specification and that PPS remapping is validated against the chosen pinout. Use MPLAB Harmony or MPLAB X IDE with the XC32 compiler for firmware development. Decoupling should include 100 nF on each VDD/VSS pair plus a bulk 4.7 µF near the regulator.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.
ドロップイン代替品: PIC32MX470F512H-I/MR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC32MX470F512H-I/MR （同一形状・フットプリント） — 相違点: Package, ADC, USB, DMA Channels, Core Architecture.
クイック比較ツール — 並列比較する代替部品を選択:
PIC32MX470F512H-120/MR
✅ ドロップイン✓ 在庫あり
$4.2 / 個
データシートを見る →PIC32MX470F512H-V/MR
✅ ドロップイン✓ 在庫あり
$6.74 / 個
データシートを見る →PIC32MX470F512HT-I/MR
✅ ドロップイン✓ 在庫あり
$6.85 / 個
データシートを見る →PIC32MX470F512H-I/PT
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC32MX450F256H-I/MR
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC32MX470F512L-I/PT
✅ ドロップイン✓ 在庫あり
$6.32 / 個
データシートを見る →PIC32MX470F512H-I/MR 最大定格＆電気的特性
| Core Architecture | MIPS32 M4K |
| CPU Bit Width | 32-bit |
| Maximum CPU Frequency | 100 MHz (120 MHz on -120 speed grade) |
| DMIPS Performance | 150 DMIPS (at 120 MHz) |
| Program Memory (Flash) | 512 KB |
| Data Memory (SRAM) | 128 KB |
| Operating Voltage Range | 2.3 V to 3.6 V |
| 動作温度範囲 | -40 °C to +105 °C (Industrial) |
| ADC Channels | 28 channels |
| USB Interface | USB 2.0 Full-Speed OTG |
| I2S/SPI Modules | 2 |
| I2C Modules | 2 |
| UART Modules | Up to 5 |
| PWM Channels | Up to 9 (peripherals vary) |
| パッケージ | 64-pin QFN (MR) 9x9 mm with exposed pad |
| 実装タイプ | Surface Mount |
| Parallel Master Port (PMP) | Yes |
| Peripheral Pin Select (PPS) | Yes |
| CTMU (Charge Time Measurement Unit) | Yes |
| RTCC (Real-Time Clock Calendar) | Yes |
| RoHS ステータス | Compliant |
PIC32MX470F512H-I/MR ピン構成
| ピン 1 | RB0 — Port B bit 0 / PGED1 (programming) |
| ピン 2 | RB1 — Port B bit 1 / PGEC1 (programming) |
| ピン 3 | RB2 — Port B bit 2 |
| ピン 4 | RB3 — Port B bit 3 |
| ピン 5 | VSS — Ground |
| ピン 6 | RB4 — Port B bit 4 |
| ピン 7 | RB5 — Port B bit 5 |
| ピン 8 | RB6 — Port B bit 6 |
| ピン 9 | RB7 — Port B bit 7 |
| ピン 10 | RB8 — Port B bit 8 |
| ピン 11 | RB9 — Port B bit 9 |
| ピン 12 | RB10 — Port B bit 10 |
| ピン 13 | RB11 — Port B bit 11 |
| ピン 14 | RB12 — Port B bit 12 |
| ピン 15 | RB13 — Port B bit 13 |
| ピン 16 | RB14 — Port B bit 14 |
| ピン 17 | RB15 — Port B bit 15 |
| ピン 18 | VDD — Digital supply voltage (2.3-3.6 V) |
| ピン 19 | VSS — Ground |
| ピン 20 | RC1 — Port C bit 1 |
| ピン 21 | RC2 — Port C bit 2 |
| ピン 22 | RC3 — Port C bit 3 |
| ピン 23 | RC4 — Port C bit 4 |
| ピン 24 | RD0 — Port D bit 0 / PMP data |
| ピン 25 | RD1 — Port D bit 1 / PMP data |
| ピン 26 | RD2 — Port D bit 2 / PMP data |
| ピン 27 | RD3 — Port D bit 3 / PMP data |
| ピン 28 | RD4 — Port D bit 4 / PMP data |
| ピン 29 | RD5 — Port D bit 5 / PMP data |
| ピン 30 | RD6 — Port D bit 6 / PMP data |
| ピン 31 | RD7 — Port D bit 7 / PMP data |
| ピン 32 | RD8 — Port D bit 8 / PMP data |
| ピン 33 | RD9 — Port D bit 9 / PMP data |
| ピン 34 | RD10 — Port D bit 10 / PMP data |
| ピン 35 | RD11 — Port D bit 11 / PMP data |
| ピン 36 | VSS — Ground |
| ピン 37 | VDD — Digital supply voltage |
| ピン 38 | RD12 — Port D bit 12 |
| ピン 39 | RD13 — Port D bit 13 |
| ピン 40 | RD14 — Port D bit 14 |
| ピン 41 | RD15 — Port D bit 15 |
| ピン 42 | RE0 — Port E bit 0 / PMPRD |
| ピン 43 | RE1 — Port E bit 1 / PMPWR |
| ピン 44 | RE2 — Port E bit 2 |
| ピン 45 | RE3 — Port E bit 3 |
| ピン 46 | RE4 — Port E bit 4 |
| ピン 47 | RE5 — Port E bit 5 |
| ピン 48 | RE6 — Port E bit 6 |
| ピン 49 | RE7 — Port E bit 7 |
| ピン 50 | RF0 — Port F bit 0 |
| ピン 51 | RF1 — Port F bit 1 |
| ピン 52 | RF2 — Port F bit 2 |
| ピン 53 | RF3 — Port F bit 3 |
| ピン 54 | RF4 — Port F bit 4 |
| ピン 55 | RF5 — Port F bit 5 |
| ピン 56 | RF6 — Port F bit 6 |
| ピン 57 | RG0 — Port G bit 0 |
| ピン 58 | RG1 — Port G bit 1 |
| ピン 59 | RG2 — Port G bit 2 / D+ or D- |
| ピン 60 | RG3 — Port G bit 3 / D+ or D- |
| ピン 61 | RG6 — Port G bit 6 / VBUS sense |
| ピン 62 | RG7 — Port G bit 7 |
| ピン 63 | RG8 — Port G bit 8 |
| ピン 64 | RG9 — Port G bit 9 |
主な用途
PIC32MX470F512H-I/MR の用途: 7 件s: USB Audio Class Device, Color TFT HMI Panel with PMP, Capacitive Touch Sensing Panel, USB HID Peripheral (Keyboard/Mouse/Game Controller), USB-to-UART / Industrial Bridge Converter, Low-Cost Graphics Terminal, Data Logging and Sensor Hub.
USB Audio Class Device
The PIC32MX470F512H-I/MR is well-suited for USB Audio Class 1.0/2.0 DACs and headsets. Its USB 2.0 Full-Speed OTG controller streams 24-bit/96 kHz audio, while the two I2S/SPI modules interface directly to DAC chips such as the PCM5102A. With 128 KB SRAM buffering, the MCU handles USB isochronous packets without dropouts. Compared to using a separate USB audio codec IC, integrating on PIC32MX470 reduces BOM and board area.
おすすめ
Color TFT HMI Panel with PMP
The Parallel Master Port (PMP) of the PIC32MX470F512H-I/MR drives color TFT LCDs in 8-bit or 16-bit parallel mode at high frame rates. Combined with 512 KB Flash for storing graphics assets and 128 KB SRAM as a framebuffer for small panels, the MCU eliminates the need for an external graphics controller. The PPS feature frees up enough I/O for touch sensing via the CTMU on the same PCB without extra pins.
おすすめ
Capacitive Touch Sensing Panel
The Charge Time Measurement Unit (CTMU) integrated in PIC32MX470F512H-I/MR provides hardware-assisted capacitive touch measurement, supporting buttons, sliders, and wheels. Combined with the 28-channel ADC, the MCU handles 10+ touch buttons without external scan ICs. The 100 MHz CPU runs MPLAB Harmony Touch library with sub-10 ms response time, making it suitable for appliance, automotive interior, and industrial control panels.
おすすめ
USB HID Peripheral (Keyboard/Mouse/Game Controller)
The PIC32MX470F512H-I/MR's USB Full-Speed OTG and 100 MHz core handle USB HID class with low interrupt latency. With 512 KB Flash, designers can store multiple HID profiles (keyboard, mouse, gamepad) plus a USB bootloader for field firmware updates. The PMP and PPS allow flexible PCB routing for mechanical matrix scanning or analog joystick inputs in custom gaming peripherals.
おすすめ
USB-to-UART / Industrial Bridge Converter
The PIC32MX470F512H-I/MR can act as a USB-CDC to UART/I2C/SPI bridge, replacing the popular MCP2200/MCP2221 with far more headroom. The 5 UART channels support RS-232/RS-485 bridge applications, and the industrial -40 °C to +105 °C temperature rating suits factory automation. Field upgrades are simple via the on-chip USB bootloader without an external programmer.
おすすめ
Low-Cost Graphics Terminal
The PIC32MX470F512H-I/MR is ideal for compact low-cost graphics terminals used in vending machines, kiosks, and access control. With PMP driving a small TFT, 512 KB Flash storing multilingual fonts and menus, and USB OTG enabling host-mode connectivity to printers or keypads, the MCU replaces systems that previously required an SBC. Compared to a Raspberry Pi-based design, PIC32MX470 offers real-time deterministic response and lower BOM cost.
おすすめ
Data Logging and Sensor Hub
The PIC32MX470F512H-I/MR integrates USB device mode for data export, I2C/SPI for sensor interfacing, and 28 ADC channels for analog measurement. With 512 KB Flash and 128 KB SRAM, it can buffer significant sensor logs locally before USB transfer. The RTCC enables accurate timestamping for unattended industrial monitoring stations across the -40 °C to +105 °C industrial range.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC32MX470F512H-I/MR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC32MX470F512H-120/MR | PIC32MX470F512H-V/MR | PIC32MX470F512HT-I/MR | PIC32MX470F512H-I/PT | PIC32MX450F256H-I/MR |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-QFN (MR) 9x9 mm | 64-QFN (MR) 9x9 mm | 64-QFN (MR) 9x9 mm | 64-QFN (MR) 9x9 mm | 64-TQFP (PT) 10x10 mm | 64-QFN (MR) 9x9 mm |
| Maximum CPU Frequency | 100 MHz | 120 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 256 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 64 KB |
| USB OTG | Yes (Full-Speed) | Yes (Full-Speed) | Yes (Full-Speed) | Yes (Full-Speed) | Yes (Full-Speed) | Yes (Full-Speed) |
| Operating Temperature | -40 °C to +105 °C (Industrial) | -40 °C to +85 °C (per -120 grade) | -40 °C to +105 °C | -40 °C to +105 °C | -40 °C to +105 °C | -40 °C to +105 °C |
| Operating Voltage | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V |
主な差別化要因
- Highest memory density in PIC32MX3/4 family （vs PIC32MX450F256H-I/MR)
- Peripheral Pin Select (PPS) for flexible routing （vs PIC32MX450F256H-I/MR)
- Industrial temperature grade as standard （vs PIC32MX470F512H-120/MR)
設計ノート
Use a 3.3V LDO such as MCP1700 or AP2112K-3.3 within 25 mm of the VDD pins. Place one 100 nF X7R 0402 or 0603 ceramic decoupling capacitor on each VDD/VSS pair (multiple pins across the package). Add a bulk 4.7 µF X5R tantalum or ceramic capacitor near the regulator output. The AVDD pin (if present in this variant) should be filtered with a ferrite bead from VDD and decoupled with its own 100 nF + 10 µF pair to reduce ADC noise. Per Microchip datasheet, total VDD ramp time should be <100 ms to ensure proper Power-on Reset behavior.
Do not confuse the PIC32MX470F512H-I/MR (100 MHz, industrial) with PIC32MX470F512H-120/MR (120 MHz). The speed grade is a Microchip ordering code suffix, not a hardware feature, but firmware timing loops and USB clock divisor calculations differ. The MCLR pin must be pulled high through a 10 kΩ resistor; leaving MCLR floating causes intermittent boot failures. JTAG/ICSP pins RB0/PGED1 and RB1/PGEC1 must not be remapped via PPS in production firmware, or programming will be blocked. The exposed thermal pad of the QFN must be soldered to the PCB ground plane for thermal dissipation.
For the 64-QFN MR package, route all four sides before placing internal components. The exposed pad (EP) must connect to a continuous ground pour with thermal vias (at least 9 vias in a 3x3 array, 0.3 mm drill, 0.5 mm pitch) to keep junction temperature below 125 °C. Keep USB D+/D- traces matched to 90 Ω differential impedance, length-matched within 150 mils, and free of vias where possible. Maintain 4x trace-width clearance between analog signals (ADC inputs) and digital switching nodes to minimize coupling.
Place the 12 MHz primary oscillator (or use the internal 8 MHz FRCDIV with PLL) within 5 mm of the OSC1/OSC2 pins. Keep crystal traces short and guarded with a ground ring to avoid EMI radiation that can disrupt USB signaling. When using the USB OTG feature, ensure VBUS sense pin (RG6 or RG7 depending on PPS) connects to USB VBUS through a resistive divider compatible with 5 V tolerance, and place a 1 µF bulk capacitor on VBUS near the connector. PPS remapping should be configured in software early in init code to lock down pin assignments before any peripheral driver opens.
コンプライアンス情報
RoHS compliant per Microchip product page. Halogen-free per Microchip environmental certification. Not AEC-Q100 qualified - choose automotive-qualified PIC32MK or PIC32MX1xx/2xx variants for AEC-Q100 needs.