PIC32MX695F512L-80I/BG - 80MHz, 512KB Flash MCU | Microchip
部品番号: PIC32MX695F512L-80I/BG ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $22.5 | $22.50 |
| 10 | $20.25 | $202.50 |
| 100 | $17.78 | $1,778.00 |
| 250 | $16.31 | $4,077.50 |
| 500 | $14.85 | $7,425.00 |
PIC32MX695F512L-80I/BG 概要
A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and programmable peripherals. Within the embedded hierarchy, the PIC32MX family sits in the high-performance 32-bit MCU tier, above 8/16-bit MCUs and below application processors. It targets connectivity-rich applications that demand deterministic real-time control plus wired networking, distinguishing it from simpler Cortex-M0/M0+ parts that lack integrated Ethernet and USB-OTG PHYs.
Key features include 5-stage pipelined Harvard architecture with MIPS16e code compression (up to 40% smaller code), four DMA channels dedicated to USB OTG and Ethernet acceleration, dual CAN 2.0b controllers, eight channels of 10-bit ADC at 1 Msps, five 16-bit timers/captures, and parallel master port for external bus expansion. The industrial -40C to +85C temperature range (designated by the 'I' suffix) supports harsh embedded deployments.
The PIC32MX5/6/7 family architecture pairs a MIPS32 M4K core with a dedicated DMA engine that offloads USB and Ethernet packet movement, freeing the CPU for application logic. The integrated USB-OTG PHY eliminates external PHY chips, reducing BOM cost and PCB area. The 121-ball TFBGA provides 85 digital I/O pins plus dedicated analog and communication channels.
Typical applications include industrial Ethernet gateways, building automation controllers, USB peripherals, CAN-based sensor networks, point-of-sale terminals, and networked embedded sensing. The combination of Ethernet, USB-OTG, and dual CAN makes it a single-chip solution for protocol-rich industrial nodes.
When designing with this device, allocate pins for Ethernet MII/RMII PHY interface (typically 10-17 pins), USB DP/DM with proper impedance-controlled routing, and provide bulk decoupling near each supply pin. The TFBGA package requires careful PCB layout with microvia or via-in-pad technology for reliable assembly.
This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MX family, and practical design notes not consolidated in the manufacturer datasheet.
ドロップイン代替品: PIC32MX695F512L-80I/BG — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC32MX695F512L-80I/BG （同一形状・フットプリント） — 相違点: USB, ADC, Package, DMA Channels, Operating Temperature.
クイック比較ツール — 並列比較する代替部品を選択:
PIC32MX695F512LT-80I/BG
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC32MX695F512L-80I/PT
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC32MX675F512L-80I/BG
✅ ドロップイン✓ 在庫あり
$8.2 / 個
データシートを見る →PIC32MX795F512L-80I/BG
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$9.1 / 個
データシートを見る →PIC32MX575F512L-80I/BG
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$5.88 / 個
データシートを見る →PIC32MX695F512L-80I/BG 最大定格＆電気的特性
| Core Architecture | MIPS32 M4K 32-bit RISC |
| Maximum CPU Speed | 80 MHz (105 DMIPS) |
| Program Memory (Flash) | 512 KB (512K x 8) |
| Data Memory (SRAM) | 128 KB |
| Operating Voltage Range | 2.3V to 3.6V |
| パッケージ | 121-TFBGA (10x10 mm) |
| Number of I/O Pins | 85 |
| Ethernet MAC | 10/100 Mbps with MII/RMII |
| USB | USB 2.0 On-The-Go with integrated PHY |
| CAN | 2x CAN 2.0b controllers |
| DMA Channels | 8 dedicated (4 for USB/Ethernet) |
| ADC | 10-bit, 16 channels, 1 Msps |
| Timers | 5 x 16-bit timer/capture |
| 動作温度 | -40C to +85C (industrial) |
| 実装タイプ | Surface Mount (TFBGA) |
| RoHS ステータス | Compliant |
PIC32MX695F512L-80I/BG ピン構成
| ピン A1 | VSS — Ground reference |
| ピン B11 | VDD — Core supply voltage |
| ピン D5 | OSC1 — Crystal oscillator input |
| ピン D6 | OSC2 — Crystal oscillator output |
| ピン E5 | MCLR — Master clear (active-low reset) |
| ピン F1 | VREF+ — ADC voltage reference positive |
| ピン F2 | VREF- — ADC voltage reference negative |
| ピン G5 | AVDD — Analog supply voltage |
主な用途
PIC32MX695F512L-80I/BG の用途: 6 件s: Industrial Ethernet Gateway, Building Automation Controller, USB Peripheral Device, CAN-Based Sensor Network Node, Point-of-Sale Terminal, Networked Embedded Sensing Hub.
Industrial Ethernet Gateway
The PIC32MX695F512L-80I/BG fits industrial Ethernet gateways because its integrated 10/100 Ethernet MAC with MII/RMII supports external PHYs directly, while the 512 KB Flash accommodates TCP/IP stacks such as Microchip's MPLAB Harmony Net Services. The 128 KB SRAM buffers concurrent Ethernet packets alongside application logic. The 80 MHz core runs 105 DMIPS, sufficient for Modbus TCP, EtherNet/IP, or PROFINET gateway translation. Four dedicated DMA channels offload Ethernet packet movement, leaving the CPU free for industrial protocol processing.
おすすめ
Building Automation Controller
The PIC32MX695F512L-80I/BG serves building automation controllers by combining dual CAN 2.0b controllers for BACnet MS-TP or KNX sub-networks with USB OTG for local commissioning and firmware updates. The 85 digital I/O pins directly drive HVAC valves, relays, and sensor interfaces without external expanders. The -40C to +85C industrial temperature range handles unconditioned mechanical-room environments. The 512 KB Flash stores both application logic and bootloader for field upgrades via USB or CAN.
おすすめ
USB Peripheral Device
The PIC32MX695F512L-80I/BG enables USB peripherals such as data loggers, industrial instrumentation interfaces, or POS terminals because of its integrated USB 2.0 On-The-Go PHY with full-speed and low-speed support. The integrated PHY eliminates an external chip, reducing BOM cost and PCB area for compact USB dongles. The DMA engine manages USB packet transfer automatically, allowing the 80 MHz CPU to focus on data acquisition rather than bit-banging USB. The 128 KB SRAM holds USB endpoint buffers plus application scratch memory.
おすすめ
CAN-Based Sensor Network Node
The PIC32MX695F512L-80I/BG anchors CAN-based sensor networks in vehicles, factory cells, and distributed photovoltaic test by integrating two independent CAN 2.0b controllers with hardware acceptance filters. The 16-channel 10-bit ADC at 1 Msps simultaneously samples multiple sensor signals, while dual CAN buses isolate sensor traffic from command traffic. The 512 KB Flash stores CANopen or J1939 stack plus application logic. Industrial temperature grade supports under-hood automotive and factory deployments.
おすすめ
Point-of-Sale Terminal
The PIC32MX695F512L-80I/BG is suited to POS terminals where the integrated Ethernet MAC enables IP-based payment authorization while USB OTG drives external peripherals (magnetic-stripe readers, NFC modules, printers). The 80 MHz core handles TLS handshake and encrypted communication, and the 512 KB Flash holds secure payment libraries. The 128 KB SRAM buffers transaction data while peripherals exchange data via DMA offload. Industrial temperature grade supports retail environments with variable thermal conditions.
おすすめ
Networked Embedded Sensing Hub
The PIC32MX695F512L-80I/BG enables networked embedded sensing hubs where multiple analog and digital sensors feed data over Ethernet for cloud aggregation. The 16-channel 10-bit ADC captures analog sensors while 85 digital I/O read switches and encoders. The 512 KB Flash stores sensor processing algorithms and lightweight MQTT/HTTP stacks. The 80 MHz core fuses sensor data at sample rates above 1 kHz per channel. The -40C to +85C range supports outdoor and industrial cabinet deployments.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC32MX695F512L-80I/BG — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC32MX695F512LT-80I/BG | PIC32MX675F512L-80I/BG | PIC32MX795F512L-80I/BG |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 121-TFBGA (10x10 mm) | 121-TFBGA (10x10 mm) - same | 121-TFBGA (10x10 mm) - same | 121-TFBGA (10x10 mm) - same |
| CPU Core | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit |
| Maximum Clock Speed | 80 MHz (105 DMIPS) | 80 MHz (105 DMIPS) | 80 MHz (105 DMIPS) | 80 MHz (105 DMIPS) |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB |
| Ethernet MAC | 10/100 (MII/RMII) | 10/100 (MII/RMII) | Not present | 10/100 (MII/RMII) |
| USB OTG PHY | Integrated | Integrated | Integrated | Integrated |
| CAN Controllers | 2 | 2 | 2 | 2 |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
主な差別化要因
- Integrated 10/100 Ethernet MAC on-chip eliminates external controller （vs PIC32MX675F512L-80I/BG)
- Integrated USB 2.0 OTG PHY eliminates external PHY chip （vs PIC32MX575F512L-80I/BG)
- Same 121-TFBGA footprint across PIC32MX5/6/7 family for design reuse （vs PIC32MX695F512L-80I/PT (100-TQFP))
設計ノート
The 121-ball TFBGA package uses a 0.8 mm ball pitch, which typically requires microvia (laser-drilled) technology or via-in-pad for reliable PCB assembly. Standard 0.3 mm mechanical drill vias are too large for the 0.8 mm pitch fan-out. Plan PCB stack-up with at least 4 layers: top signal + power, internal ground plane, internal power plane, bottom signal. Maintain 50-ohm controlled impedance on Ethernet MII/RMII traces and 90-ohm differential impedance on USB DP/DM traces.
Place decoupling capacitors (100 nF ceramic) within 2 mm of every VDD/AVDD ball. Add bulk capacitors (4.7 uF to 22 uF) near the IC supply balls to suppress transient current during DMA bursts. The MCU has separate AVDD and VDD rails; the ADC accuracy depends on clean AVDD - use a ferrite bead or filter to isolate analog supply from digital switching transients.
Route the 80 MHz CPU clock trace (OSC1/OSC2 or external clock input) with grounded guard traces on both sides and keep it away from analog signals. The Ethernet MII bus runs at 25 MHz (MII mode) or 50 MHz (RMII mode) - keep these traces short and impedance-controlled. The USB DP/DM traces must be 90-ohm differential with no stubs, and route them as a matched pair within 0.15 mm length difference.
Do not confuse the PIC32MX695F512L-80I/BG (121-TFBGA, Ethernet) with the PIC32MX675F512L-80I/BG (121-TFBGA, no Ethernet) or the PIC32MX695F512L-80I/PT (100-TQFP, different package). The PT and BG suffixes indicate different physical packages with different PCB footprints. The 'I' suffix means industrial temperature (-40C to +85C); 'V' would mean -40C to +105C extended. The '80' in '80I' denotes 80 MHz speed grade.
コンプライアンス情報
RoHS compliant per Microchip product page. Not AEC-Q100 qualified; for automotive applications consider PIC32MX variants with explicit automotive qualification. Industrial temperature grade -40C to +85C designated by 'I' suffix.
