PIC32MZ1024EFK064-E/MR - 200MHz 1MB Flash MCU QFN-64 | Microchip
部品番号: PIC32MZ1024EFK064-E/MR ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $9.46 | $9.46 |
| 10 | $8.51 | $85.10 |
| 100 | $7.59 | $759.00 |
| 500 | $6.8 | $3,400.00 |
| 1,000 | $6.05 | $6,050.00 |
PIC32MZ1024EFK064-E/MR 概要
A 32-bit microcontroller (MCU) is an integrated circuit combining a high-performance processor core, program memory, data memory, and programmable peripherals on a single die. The PIC32MZ EF family extends this architecture with the MIPS Warrior M-class core, placing it in the broader hierarchy of 32-bit MCUs alongside ARM Cortex-M3/M4 and higher. The EF variant adds FPU and DSP extensions for connectivity, graphics, and motor-control workloads, sitting between the PIC32MX (lower performance, no FPU) and the PIC32MZ W1 (wireless-enabled) families.
Key features of the PIC32MZ1024EFK064-E/MR include a 12-channel DMA controller, integrated crypto accelerator (AES, 3DES, SHA, MD5, HMAC), 200 MHz / 330 DMIPS core performance, dedicated peripheral pin select (PPS) remapping, Hi-Speed USB 2.0 with PHY, dual CAN 2.0B controllers, 10/100 Ethernet MAC, and a 12-bit 18-MSPS ADC. The integrated crypto engine enables hardware-accelerated secure boot, TLS handshake acceleration, and secure firmware update workflows for connected embedded systems. Memory protection, a true random number generator (TRNG), and secure debug lock further enhance security.
Typical applications include industrial IoT gateways, automotive body and infotainment ECUs, HMI/touchscreen controllers, motor-control BLDC/PMSM drives, secure point-of-sale terminals, and Ethernet-connected sensor nodes. Its combination of high throughput, deterministic real-time interrupt handling, and integrated crypto makes it suitable for Industry 4.0 edge devices requiring TLS, secure firmware updates, and rich connectivity.
When designing with the PIC32MZ1024EFK064-E/MR, the exposed thermal pad must be soldered to a sufficient copper pour to meet the 31 C/W theta-JA rating. The PPS system allows most peripherals to be reassigned to nearly any I/O pin, simplifying routing in mixed-signal layouts. Developers typically use MPLAB X IDE with the XC32 compiler and Harmony 3 framework for peripheral drivers and middleware.
This page synthesizes distributor pricing, same-family drop-in variants, and practical design guidance not collected on the manufacturer datasheet alone, helping engineers select the right PIC32MZ EF derivative for their PCB and BOM constraints.
ドロップイン代替品: PIC32MZ1024EFK064-E/MR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC32MZ1024EFK064-E/MR （同一形状・フットプリント） — 相違点: Package, ADC, DSP Extensions, Core Architecture, FPU.
クイック比較ツール — 並列比較する代替部品を選択:
PIC32MZ1024EFK064-I/MR
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC32MZ1024EFK064T-E/MR
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC32MZ1024EFE064-E/MR
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC32MZ1024EFH064-I/MR
✅ ドロップイン✓ 在庫あり
$7.25 / 個
データシートを見る →PIC32MZ0512EFK064-E/MR
✅ ドロップイン✓ 在庫あり
$4.76 / 個
データシートを見る →PIC32MZ1024EFG064-I/MR
✅ ドロップイン✓ 在庫あり
$7.99 / 個
データシートを見る →PIC32MZ1024EFK064-E/MR 最大定格＆電気的特性
| Core | MIPS32 M-Class (MIPS Warrior) |
| Operating Frequency | 200 MHz (E temp grade spec); up to 252 MHz (family max) |
| DMIPS | 330 DMIPS |
| Program Flash | 1 MB (1024 KB) |
| SRAM | 256 KB |
| FPU | IEEE 754-compliant hardware floating-point unit |
| DSP Extensions | Four 64-bit accumulators, single-cycle MAC, saturating/fractional math |
| Crypto Accelerator | AES, 3DES, SHA-1/2, MD5, HMAC, TRNG |
| DMA Channels | 12 dedicated channels |
| ADC | 12-bit, up to 18 MSPS (per-family spec) |
| USB | Hi-Speed USB 2.0 with integrated PHY |
| Ethernet | 10/100 MAC (RMII/MII interface) |
| CAN | 2x CAN 2.0B controllers |
| Operating Voltage | 2.3 V to 3.6 V |
| 動作温度 | -40C to +125C (E grade) |
| パッケージ | 64-QFN (9x9 mm) with exposed pad |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
PIC32MZ1024EFK064-E/MR ピン構成
| ピン 1 | VSS — Ground reference |
| ピン 2 | RPE4/PMD4/RE4 — GPIO port E pin 4 |
| ピン 3 | RPE5/PMD5/RE5 — GPIO port E pin 5 |
| ピン 4 | RPE6/PMD6/RE6 — GPIO port E pin 6 |
| ピン 5 | RPE7/PMD7/RE7 — GPIO port E pin 7 |
| ピン 6 | RF0 — GPIO port F pin 0 |
| ピン 7 | RF1 — GPIO port F pin 1 |
| ピン 8 | VDD — Digital supply voltage 3.3V |
| ピン 9 | RA0 — GPIO port A pin 0 |
| ピン 10 | RA1 — GPIO port A pin 1 |
| ピン 11 | RA2 — GPIO port A pin 2 |
| ピン 12 | RA3 — GPIO port A pin 3 |
| ピン 13 | RA4 — GPIO port A pin 4 |
| ピン 14 | RA5 — GPIO port A pin 5 |
| ピン 15 | RA6 — GPIO port A pin 6 |
| ピン 16 | RA7 — GPIO port A pin 7 |
| ピン 17 | AVDD — Analog supply voltage |
| ピン 18 | AVSS — Analog ground |
| ピン 19 | RB0 — GPIO port B pin 0 |
| ピン 20 | RB1 — GPIO port B pin 1 |
| ピン 21 | RB2 — GPIO port B pin 2 |
| ピン 22 | RB3 — GPIO port B pin 3 |
| ピン 23 | RB4 — GPIO port B pin 4 |
| ピン 24 | RB5 — GPIO port B pin 5 |
| ピン 25 | RB6 — GPIO port B pin 6 |
| ピン 26 | RB7 — GPIO port B pin 7 |
| ピン 27 | RC0 — GPIO port C pin 0 |
| ピン 28 | RC1 — GPIO port C pin 1 |
| ピン 29 | RC2 — GPIO port C pin 2 |
| ピン 30 | RC3 — GPIO port C pin 3 |
| ピン 31 | RC4 — GPIO port C pin 4 |
| ピン 32 | RC5 — GPIO port C pin 5 |
| ピン 33 | RC6 — GPIO port C pin 6 |
| ピン 34 | RC7 — GPIO port C pin 7 |
| ピン 35 | RD0 — GPIO port D pin 0 |
| ピン 36 | RD1 — GPIO port D pin 1 |
| ピン 37 | RD2 — GPIO port D pin 2 |
| ピン 38 | RD3 — GPIO port D pin 3 |
| ピン 39 | RD4 — GPIO port D pin 4 |
| ピン 40 | RD5 — GPIO port D pin 5 |
| ピン 41 | RD6 — GPIO port D pin 6 |
| ピン 42 | RD7 — GPIO port D pin 7 |
| ピン 43 | RG0 — GPIO port G pin 0 |
| ピン 44 | RG1 — GPIO port G pin 1 |
| ピン 45 | RG2 — GPIO port G pin 2 |
| ピン 46 | RG3 — GPIO port G pin 3 |
| ピン 47 | VSS — Ground reference |
| ピン 48 | RH0 — GPIO port H pin 0 |
| ピン 49 | RH1 — GPIO port H pin 1 |
| ピン 50 | RH2 — GPIO port H pin 2 |
| ピン 51 | RH3 — GPIO port H pin 3 |
| ピン 52 | RH4 — GPIO port H pin 4 |
| ピン 53 | RH5 — GPIO port H pin 5 |
| ピン 54 | RH6 — GPIO port H pin 6 |
| ピン 55 | RH7 — GPIO port H pin 7 |
| ピン 56 | RJ0 — GPIO port J pin 0 |
| ピン 57 | RJ1 — GPIO port J pin 1 |
| ピン 58 | RJ2 — GPIO port J pin 2 |
| ピン 59 | RJ3 — GPIO port J pin 3 |
| ピン 60 | RJ4 — GPIO port J pin 4 |
| ピン 61 | RJ5 — GPIO port J pin 5 |
| ピン 62 | RJ6 — GPIO port J pin 6 |
| ピン 63 | RJ7 — GPIO port J pin 7 |
| ピン 64 | VDD — Digital supply voltage 3.3V |
| ピン 65 | EP — Exposed thermal pad (must be soldered to ground pour) |
主な用途
PIC32MZ1024EFK064-E/MR の用途: 6 件s: Industrial IoT Gateway, Automotive Body and Infotainment ECU, HMI and Touchscreen Controller, BLDC/PMSM Motor Control Drive, Secure Point-of-Sale (POS) Terminal, Ethernet-Connected Sensor Node.
Industrial IoT Gateway
The PIC32MZ1024EFK064-E/MR's 200 MHz MIPS core with FPU and hardware crypto accelerator is well-suited for industrial IoT gateways aggregating multiple sensor protocols. Its integrated 10/100 Ethernet MAC, dual CAN 2.0B controllers, and Hi-Speed USB 2.0 PHY enable direct connection to fieldbuses, IP networks, and USB peripherals without external bridge ICs. The AES/SHA crypto engine accelerates TLS 1.3 handshakes for MQTT/HTTPS, while the true random number generator provides entropy for key generation. The 1 MB Flash accommodates gateway firmware plus a TCP/IP stack (e.g., MPLAB Harmony Net), and the 256 KB SRAM handles TLS session state, packet buffers, and application threads. The E temperature grade (-40C to +125C) supports factory-floor enclosures without derating.
おすすめ
Automotive Body and Infotainment ECU
With an operating range of -40C to +125C and dual CAN 2.0B controllers, the PIC32MZ1024EFK064-E/MR can serve automotive body and infotainment ECUs requiring cryptographic authentication of vehicle subsystems. The hardware crypto engine enables secure CAN message authentication (AUTOSAR SecOC), while the FPU accelerates audio decoding for infotainment HMI. The 12-bit 18-MSPS ADC handles analog sensor inputs (e.g., temperature, position), and the Hi-Speed USB supports smartphone projection stacks. Microchip's automotive-grade PIC32MZ EF variants are qualified per AEC-Q100, making this device family a drop-in for body controllers, gateway ECUs, and instrument cluster designs.
おすすめ
HMI and Touchscreen Controller
The PIC32MZ1024EFK064-E/MR's MIPS32 M-class core with integrated FPU drives graphical HMI/touchscreen interfaces for industrial control panels. The dedicated DMA controller (12 channels) offloads SPI display refresh and I2C touch sensing from the core, leaving cycles for application logic. The peripheral pin select (PPS) remaps peripherals to almost any I/O, simplifying PCB layout for mixed signal routing. The 1 MB Flash stores graphical frames plus the LVGL/EmWin stack, while 256 KB SRAM serves as the active drawing buffer. The 64-QFN (9x9) package fits behind 3.5" to 7" displays.
おすすめ
BLDC/PMSM Motor Control Drive
The PIC32MZ1024EFK064-E/MR's 200 MHz core with DSP extensions and FPU executes field-oriented control (FOC) loops for BLDC and PMSM motors with sub-microsecond control periods. The four 64-bit accumulators, single-cycle MAC, and saturating fractional arithmetic enable high-bandwidth current control loops without integer overflow. Dedicated PWM outputs and the 12-bit 18-MSPS ADC with up to 40 analog inputs provide simultaneous phase-current sampling and center-aligned PWM generation. The integrated crypto engine secures proprietary motor-control firmware against cloning. This combination suits industrial servo drives, e-bike controllers, and drone ESCs requiring deterministic real-time performance.
おすすめ
Secure Point-of-Sale (POS) Terminal
The PIC32MZ1024EFK064-E/MR's hardware AES/SHA/TRNG crypto accelerator makes it suitable for PCI-PTS compliant point-of-sale terminals requiring secure PIN entry and encrypted card readers. The true random number generator supplies entropy for key generation, while the integrated crypto engine accelerates EMV/TDES and AES PIN-block encryption. The Hi-Speed USB supports contactless NFC readers, the Ethernet MAC drives IP-connected POS backends, and the dual CAN buses support peripheral accessories. The 1 MB Flash stores firmware with secure boot enforcement, and 256 KB SRAM handles concurrent TLS, transaction processing, and UI rendering.
おすすめ
Ethernet-Connected Sensor Node
The PIC32MZ1024EFK064-E/MR's integrated 10/100 Ethernet MAC plus hardware crypto engine forms a compact PoE-style sensor node without external bridge ICs. The 12-bit ADC reads analog sensors (temperature, pressure, strain gauges), the DMA controller streams conversions to RAM without core intervention, and the TLS stack on top of MPLAB Harmony Net enables secure MQTT/HTTPS reporting. The 1 MB Flash accommodates Over-The-Air (OTA) staging with dual-bank support, and the E temperature grade supports outdoor deployments. The 64-QFN footprint fits within IP67 sensor housings for industrial plant monitoring.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC32MZ1024EFK064-E/MR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC32MZ1024EFK064-I/MR | PIC32MZ1024EFK064T-E/MR | PIC32MZ1024EFE064-E/MR | PIC32MZ1024EFH064-I/MR | PIC32MZ0512EFK064-E/MR |
|---|---|---|---|---|---|---|
| Package | 64-QFN (9x9) | 64-QFN (9x9) - same | 64-QFN (9x9) - same | 64-QFN (9x9) - same | 64-QFN (9x9) - same | 64-QFN (9x9) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 2 MB | 512 KB |
| SRAM | 256 KB | 256 KB | 256 KB | 512 KB | 128 KB | |
| Temperature Grade | -40C to +125C (E) | -40C to +85C (I) | -40C to +125C (E) | -40C to +125C (E) | -40C to +85C (I) | |
| Crypto Engine | AES/SHA/TRNG (K-series full) | E-series peripherals | AES/SHA/TRNG (H-series) | |||
| Max CPU Speed | 200 MHz | 200 MHz | 200 MHz | 180 MHz | ||
| USB | Hi-Speed USB 2.0 with PHY | Hi-Speed USB 2.0 with PHY | Hi-Speed USB 2.0 with PHY | |||
| Pin Count | 64 | 64 | 64 | 64 |
主な差別化要因
- Integrated hardware crypto engine with TRNG on the K-series die （vs PIC32MZ1024EFE064-E/MR)
- 200 MHz guaranteed over full -40C to +125C extended industrial range （vs PIC32MZ1024EFK064-I/MR)
- Dual CAN 2.0B plus 10/100 Ethernet plus Hi-Speed USB on a single die （vs PIC32MX795F512L)
設計ノート
The 64-QFN (9x9) exposed thermal pad MUST be soldered to a continuous ground copper pour to achieve the rated theta-JA of approximately 31 C/W. For designs dissipating >1W (e.g., when the USB PHY is active and the crypto engine runs at full speed), allocate at least 1 square inch of 2 oz copper on the top layer plus thermal vias to internal ground planes. Without the exposed-pad solder joint, junction temperature can exceed 125C even at room ambient under full CPU load, triggering the thermal shutdown.
Place 0.1 uF X7R bypass capacitors within 2 mm of every VDD/AVDD pin and a single bulk 10 uF X5R capacitor near the package. Decouple AVDD from VDD with a ferrite bead plus 10 uF/0.1 uF pair to prevent ADC reference noise from digital switching. The 25 MHz crystal (or resonator) trace length must be <5 mm with a guard ground pour to minimize jitter. For Ethernet, route RMII traces length-matched within 50 mil tolerance to maintain timing margins.
The peripheral pin select (PPS) system is unlocked only after writing specific sequence values to the CFGCON register; without this unlock, peripheral I/O remapping silently fails and the device appears to boot normally with no peripheral function on assigned pins. Always lock the PPS register after configuration to prevent runaway code from re-mapping critical pins. Also note that the E temperature grade caps the core frequency at 200 MHz - running at 252 MHz violates the temperature/voltage endurance guarantee.
コンプライアンス情報
RoHS and REACH compliant per Microchip product page. Standard PIC32MZ1024EFK064-E/MR is not AEC-Q100 qualified; for AEC-Q100 automotive grade, the PIC32MZ1024EFK064T-E/MR or V-tape-of-fident automotive variants should be selected. E temperature grade qualifies it for harsh industrial environments.
