Renesas Electronics

R5F109AAJSP#X0 - 16-Bit 32MHz RL78/F12 MCU | Renesas

部品番号: R5F109AAJSP#X0 ✓ 生産中
1.8 V to 5.5 V Vdss 30-LSSOP, 6.1 mm body width Package 32 MHz Speed 16 KB (16K x 8) Memory
MOQ: 1 |

R5F109AAJSP#X0 概要

The Renesas Electronics R5F109AAJSP#X0 is a 16-bit RL78/F12 microcontroller built for low-power automotive and industrial control applications. It operates at up to 32 MHz, provides 16 KB of flash program memory, 1 KB of RAM, and 4 KB of EEPROM, and is housed in a 30-LSSOP package. The RL78 core combines compact 16-bit instruction-set processing with low standby-current characteristics.

An RL78 microcontroller is a compact embedded-processing device that combines a CPU core, flash memory, RAM, EEPROM, timers, serial interfaces, analog converters, and safety-oriented peripherals in one package. RL78/F12 devices occupy the low-power MCU tier of Renesas's product hierarchy, supporting battery-powered instruments, body-related modules, sensor nodes, and compact automotive control units where deterministic operation and low standby consumption are important.

Key device attributes include a 32 MHz maximum operating frequency, 16 KB flash organized as 16K x 8, 1 KB RAM organized as 1 x 8, and 4 KB EEPROM. The 1.8 V to 5.5 V operating range allows connection to 3.3 V and 5 V system rails. The device also includes a built-in LIN module for automotive networking and functional-safety resources such as flash CRC calculation, illegal-memory-access detection, RAM guard, A/D converter testing, and SFR protection.

The 30-LSSOP package is intended for cost-sensitive designs where a through-hole-style lead arrangement simplifies board inspection and assembly while keeping the footprint compact. Because the R5F109AAJSP#X0 is an RL78/F12 member, its 16 KB flash capacity suits compact control loops, status monitoring, key management, simple communications, and configuration tasks rather than large graphical user interfaces or high-volume data logging.

Typical uses include LIN-connected automotive submodules, compact sensor controllers, small industrial condition-monitoring units, battery-operated instruments, and low-power actuator controllers. The LIN interface makes the MCU appropriate for distributed vehicle systems where a node must exchange diagnostic or control data over a low-cost automotive network.

Designers should confirm the complete peripheral map, clock configuration, pin multiplexing, and electrical limits against the manufacturer datasheet before layout release. Use decoupling close to the supply pins, route the 32 MHz clock with short return paths, and confirm that the selected PCB footprint matches the 30-LSSOP variant. If firmware depends on a specific timer, ADC channel, or LIN configuration, verify that requirement against the ordered part number before production release.

ドロップイン代替品: R5F109AAJSP#X0 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

R5F109AAJSP#V0

✅ ドロップイン
📦 30-LSSOP
Same RL78/F12 device, 32 MHz core, 16 KB flash, and 30-LSSOP package; ordering-code condition differs

📋 参考代替品(カタログ未掲載)

R5F109AAJSP#X0 最大定格&電気的特性

Device Type 16-bit Microcontroller Unit (MCU)
Series RL78/F12
Core Architecture 16-bit RL78
最大クロック周波数 32 MHz
Flash Program Memory 16 KB (16K x 8)
RAM 1 KB (1 x 8)
EEPROM 4 KB
Operating Voltage Range 1.8 V to 5.5 V
パッケージ 30-LSSOP, 6.1 mm body width
Automotive Network Interface LIN module
Flash CRC Calculation Supported
Illegal Memory Access Detection Supported
RAM Guard Supported
A/D Converter Testing Supported
SFR Protection Supported
RoHS ステータス Compliant

R5F109AAJSP#X0 30-lssop, 6.1 mm body width ピン配置ガイド

R5F109AAJSP#X0 (30-lssop, 6.1 mm body width パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

R5F109AAJSP#X0 の 30-lssop, 6.1 mm body width パッケージピン配置図

詳細なピン配置データはありません: R5F109AAJSP#X0.

詳細は データシート をご参照ください。

主な用途

R5F109AAJSP#X0 の用途: 6 件s: LIN-Connected Automotive Control Node, Battery-Powered Sensor Controller, Industrial Condition-Monitoring Unit, Small Actuator and Solenoid Driver Module, Embedded Key and Lock Controller, Compact Instrumentation Controller.

🚗

LIN-Connected Automotive Control Node

The R5F109AAJSP#X0 fits a distributed automotive node because its RL78/F12 architecture includes a built-in LIN module alongside a 32 MHz 16-bit core. The MCU can execute control logic, supervise inputs, and exchange diagnostic or status data through the LIN network while operating from a 1.8 V to 5.5 V supply. Its 16 KB flash accommodates compact firmware, and the 4 KB EEPROM supports configuration retention. The 30-LSSOP package also suits assemblies where a compact footprint and inspectable leads are preferred.

🧩

Battery-Powered Sensor Controller

The R5F109AAJSP#X0 is appropriate for a compact, battery-operated sensing module that periodically measures a condition and transmits a processed result. Its low-power-oriented RL78/F12 design can remain in a low-consumption state between measurement events, while the 32 MHz core provides adequate timing headroom for sensor conditioning and protocol handling. The 1 KB RAM is sufficient for short working buffers, and 16 KB flash holds a focused control program. Use the analog and low-power details from the manufacturer datasheet to establish the duty cycle and battery budget.

🏭

Industrial Condition-Monitoring Unit

A compact industrial monitor can use the R5F109AAJSP#X0 to sample equipment conditions, evaluate threshold states, and record events locally. The 16-bit RL78 core operating up to 32 MHz provides deterministic timer-based scheduling, while 16 KB flash and 1 KB RAM are adequate for a focused monitoring task rather than a large data-logging platform. The 4 KB EEPROM can retain calibration or configuration values when the firmware is designed for it. The 1.8 V to 5.5 V range permits integration with regulated industrial rails.

⚡

Small Actuator and Solenoid Driver Module

The R5F109AAJSP#X0 can serve as the logic controller in a small actuator module that accepts commands, manages sequencing, and reports system status. Its 32 MHz 16-bit core is suitable for deterministic timer and state-machine execution, while the 1.8 V to 5.5 V operating range supports integration with common low-voltage power systems. The device's flash and RAM limits favor a compact firmware footprint, and the 4 KB EEPROM can support persistent settings. Power-stage design, flyback protection, and thermal margin remain the responsibility of the surrounding circuit.

🔒

Embedded Key and Lock Controller

The R5F109AAJSP#X0 suits a compact key, lock, or access-control module that evaluates inputs and manages a small state machine. Its 16 KB flash provides space for a dedicated firmware image, while 1 KB of RAM is adequate for event buffers and short protocol transactions. The 32 MHz clock capability supports time-based debouncing, timing checks, and communication servicing without requiring a high-end application processor. EEPROM space can hold configuration data where the firmware supports nonvolatile parameter storage. Confirm security-feature requirements separately before using it for a safety-critical lock mechanism.

📟

Compact Instrumentation Controller

The R5F109AAJSP#X0 can coordinate a small instrument that controls measurements, processes results, and presents status through a limited display or serial interface. Its 16-bit architecture and 32 MHz operating frequency support responsive control loops and menu logic, while 16 KB flash is appropriate for a dedicated rather than extensible firmware platform. The device's 1.8 V to 5.5 V range permits use with 3.3 V and 5 V system rails. Confirm the required A/D channels, timer resources, and display interface against the manufacturer datasheet before schematic assignment.

おすすめ製品の概要

R5F109AAJSP#V0 Same-footprint RL78/F12 candidate for automotive control nodes 使用用途: LIN-Connected Automotive Control Node, Battery-Powered Sensor Controller, Industrial Condition-Monitoring Unit, Small Actuator and Solenoid Driver Module, Embedded Key and Lock Controller, Compact Instrumentation Controller
What is the R5F109AAJSP#X0?
The R5F109AAJSP#X0 is a Renesas Electronics RL78/F12 16-bit microcontroller with a 32 MHz core, 16 KB of flash memory, 1 KB of RAM, and 4 KB of EEPROM. According to the Renesas RL78/F12 product page, the device supports a 1.8 V to 5.5 V supply range and includes a LIN module for automotive networking. It is packaged in a 30-LSSOP configuration for compact embedded control designs.
What are the key specifications of R5F109AAJSP#X0 that engineers should know?
The principal R5F109AAJSP#X0 specifications are a 16-bit RL78 core, 32 MHz maximum operating frequency, 16 KB flash, 1 KB RAM, 4 KB EEPROM, and a 1.8 V to 5.5 V operating range. Renesas lists the device in a 30-LSSOP package and highlights its LIN interface and functional-safety peripherals. These figures define it as a low-power MCU for compact automotive or industrial control nodes.
How much flash and RAM does the R5F109AAJSP#X0 have?
The R5F109AAJSP#X0 contains 16 KB of flash program memory and 1 KB of RAM, with 4 KB of additional EEPROM. Renesas describes the flash as 16K x 8 and the RAM as 1 x 8. This memory combination supports compact control firmware, configuration storage, and short protocol handlers, but it is not intended for large graphical interfaces or extensive data buffering.
What is the operating voltage of R5F109AAJSP#X0?
The R5F109AAJSP#X0 operates from 1.8 V to 5.5 V. The range allows the MCU to run from common 3.3 V and 5 V system rails while also supporting lower-voltage designs. Confirm the minimum operating voltage required by the clock configuration, analog circuitry, and LIN transceiver in the complete system before selecting the supply scheme.
Where can I download the R5F109AAJSP#X0 datasheet?
The official R5F109AAJSP#X0 documentation starts on the Renesas Electronics RL78/F12 part-details page, where the device data, family information, and ordering code are published. Use the manufacturer's datasheet link on that page for the authoritative pin list, electrical characteristics, memory map, timing values, and peripheral descriptions before beginning PCB or firmware design.
Where can I find the R5F109AAJSP#X0 pinout?
The R5F109AAJSP#X0 pinout is defined by its 30-LSSOP package and is published through the Renesas RL78/F12 device documentation. Use the package drawing and pin-description table from the manufacturer datasheet to identify supply pins, ground pins, LIN, reset, programming interfaces, clock pins, and port functions. Confirm the exact pad numbering against the selected PCB footprint.
What is the best drop-in replacement for R5F109AAJSP#X0?
The closest documented same-footprint candidate is R5F109AAJSP#V0, which is listed as an RL78/F12 16-bit, 32 MHz, 16 KB flash MCU in a 30-LSSOP package. Treat it as a candidate rather than an unconditional substitution until ordering codes, temperature grades, pin functions, and qualification requirements are confirmed from the Renesas documentation for the specific production design.
Can R5F109AAJSP#V0 replace R5F109AAJSP#X0?
R5F109AAJSP#V0 is a candidate drop-in replacement because distributor records describe the same RL78/F12 architecture, 32 MHz operation, 16 KB flash configuration, and 30-LSSOP package. A PCB-level swap still requires verification of temperature grade, qualification, pin multiplexing, and ordering-code meaning. Obtain the Renesas ordering information before changing a released bill of materials.
When should I choose R5F109AAJSP#X0 over another 16-bit MCU?
Choose the R5F109AAJSP#X0 when a design needs a 32 MHz 16-bit core, 16 KB flash, 1 KB RAM, 4 KB EEPROM, and an integrated LIN interface in a 30-LSSOP package. It is especially suitable for distributed automotive nodes and low-power monitoring products. Select another MCU if the application needs a larger memory system, different communications protocol, or a package already supported by your PCB.
Is R5F109AAJSP#X0 suitable for automotive applications?
The R5F109AAJSP#X0 is suitable for automotive-related control functions because the RL78/F12 family includes a built-in LIN module and functional-safety features such as flash CRC calculation, RAM guard, illegal-memory-access detection, A/D converter testing, and SFR protection. Automotive production requirements should still be confirmed for the exact ordering code, temperature grade, and qualification status.
What can replace the R5F109AAJSP#X0?
The most direct documented replacement candidate is R5F109AAJSP#V0, which shares the RL78/F12 family, 32 MHz maximum frequency, 16 KB flash configuration, and 30-LSSOP package. Verify the ordering-code differences and device qualifications before substituting it. If no documented pin-compatible part satisfies the requirements, keep the original footprint and qualify a different device through the normal hardware-change process.
Is R5F109AAJSP#X0 the same as R5F109AAJSP#V0?
The two parts share the R5F109AAJSP base device identity and are listed with the same RL78/F12, 32 MHz, 16 KB flash, and 30-LSSOP characteristics. The final ordering characters may identify a different purchasing or qualification condition, so they are not automatically interchangeable without checking the Renesas ordering table, temperature grade, and production requirements for the intended application.
What are the best Renesas alternatives to R5F109AAJSP#X0 for automotive control?
R5F109AAJSP#V0 is the best documented Renesas candidate because it appears alongside the target with the same RL78/F12 family and 30-LSSOP package in distributor records. For a different automotive communications architecture or larger application, evaluate other RL78/F12 members through the Renesas product-selection tools. Preserve the footprint and confirm the required LIN, timer, ADC, and memory functions before choosing a broader family alternative.
Where can I buy R5F109AAJSP#X0 online?
The R5F109AAJSP#X0 can be requested through the Request a Quote form on this page. Current commercial availability and shipment timing should be confirmed through that form, which allows the exact MPN, quantity, and packaging requirements to be reviewed. Use the manufacturer part-details page for technical documents and authorized sourcing guidance.
What is the price of R5F109AAJSP#X0?
Pricing for R5F109AAJSP#X0 depends on order quantity, purchasing terms, and current market availability. Submit the exact MPN and required quantity through the Request a Quote form on this page to receive a current quotation. Use the same form for volume pricing and delivery questions rather than relying on historical marketplace listings.
What is the lead time for R5F109AAJSP#X0?
The current lead time for R5F109AAJSP#X0 should be confirmed through the Request a Quote form on this page because it can vary with order quantity, packaging, inventory position, and manufacturing conditions. Include the required delivery date and annual usage in the request so procurement can evaluate the appropriate supply plan for this exact MPN.
Is R5F109AAJSP#X0 in stock?
Current stock for R5F109AAJSP#X0 should be verified through the Request a Quote form on this page. Provide the required quantity, reel or tray format, and target delivery date for an availability response. The manufacturer RL78/F12 part-details page can also be used to confirm ongoing product-family support and documentation.

エンジニアリング参考データ: R5F109AAJSP#X0 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the R5F109AAJSP#X0 for a compact automotive or industrial control design that benefits from a 32 MHz 16-bit core, 16 KB flash, 1 KB RAM, 4 KB EEPROM, and an integrated LIN module. R5F109AAJSP#V0 is the closest documented same-footprint alternative and may suit an equivalent design, but the ordering-code conditions must be checked before a released design changes. Do not select this MCU when firmware, stack, or data buffers require substantially more memory than 16 KB flash and 1 KB RAM. For designs needing higher analog resolution, more GPIO, different communication protocols, or a larger display pipeline, evaluate another RL78/F12 member against the complete peripheral and pin requirements. The decisive checks are package compatibility, ordering code, temperature grade, qualification, memory footprint, and deterministic peripheral availability.

代替品との比較

パラメータ この製品 R5F109AAJSP#V0
Brand Renesas Electronics Renesas Electronics
Package 30-LSSOP 30-LSSOP
Core Architecture 16-bit RL78 16-bit RL78
Maximum Clock Frequency 32 MHz 32 MHz
Flash Program Memory 16 KB (16K x 8) 16 KB (16K x 8)
RAM 1 KB (1 x 8) 1 KB (1 x 8)
Automotive Network Interface LIN module LIN module
Functional-Safety Peripherals Flash CRC calculation, illegal memory access detection, RAM guard, A/D converter testing, and SFR protection RL78/F12 functional-safety feature set

主な差別化要因

  • Documented same-family drop-in candidate (vs R5F109AAJSP#V0)
  • Integrated automotive network interface (vs Generic non-LIN 16-bit MCU)
  • Functional-safety support within the MCU (vs General-purpose 16-bit MCU without the listed RL78/F12 safeguards)

設計ノート

Assign the 30-LSSOP footprint only after checking the mechanical drawing and pin-numbering convention in the Renesas datasheet. Place the input and output bypass capacitors adjacent to their corresponding supply pins, and route them through a short return path. Because the package has fine-pitch leads, verify solder mask clearance, paste volume, and reflow profile against the PCB assembly capability.

The R5F109AAJSP#X0 operates across 1.8 V to 5.5 V, but the usable internal clock and peripheral performance depend on voltage and wait-state settings. Use a regulator with appropriate transient response, provide local high-frequency decoupling, and keep analog and digital return currents separated as far as the board area allows. Confirm the exact brownout and clock-configuration requirements in the manufacturer datasheet.

Do not treat the 16 KB flash and 1 KB RAM limits as interchangeable with larger RL78/F12 members. Estimate the linked-code size, stack depth, driver buffers, and communication queues before committing the firmware architecture. Also verify the meaning of the final ordering characters, temperature range, and automotive qualification condition for the exact R5F109AAJSP#X0 variant.

For a LIN-connected design, keep the MCU and transceiver supply paths decoupled and route the LIN interface according to the transceiver reference layout. Preserve a continuous ground reference beneath signal routes, keep switching or high-current paths away from sensitive analog inputs, and validate rise times, termination strategy, and EMC behavior on the assembled board rather than relying only on schematic review.

コンプライアンス情報

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The component listing identifies the R5F109AAJSP#X0 as RoHS compliant. Reach, halogen-free, conflict-minerals, and exact AEC-Q100 qualification status for this ordering code are not stated in the available records.

データ検証日: 2026-11-08 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

R5F109AAJSP#X0 datasheet R5F109AAJSP#X0 pinout R5F109AAJSP#X0 specifications R5F109AAJSP#X0 price R5F109AAJSP#X0 stock R5F109AAJSP#X0 equivalent R5F109AAJSP#X0 replacement R5F109AAJSP#X0 vs R5F109AAJSP#V0 R5F109AAJSP 30-LSSOP pinout Renesas R5F109AAJSP#X0 microcontroller R5F109AAJSP#X0 32MHz 16KB flash R5F109AAJSP#X0 LIN module R5F109AAJSP#X0 automotive control R5F109AAJSP#X0 low power MCU R5F109AAJSP#X0 footprint

関連部品&用語

Renesas Electronics R5F109AAJSP#X0 R5F109AAJSP#V0 RL78/F12 RL78 core Renesas Electronics 16-bit microcontroller embedded microcontroller low-power MCU semiconductor 32 MHz clock 16 KB flash memory 1 KB RAM 4 KB EEPROM 1.8 V to 5.5 V operating range LIN module automotive networking 30-LSSOP LSSOP package family surface-mount package flash CRC calculation illegal memory access detection RAM guard A/D converter testing SFR protection functional safety RoHS
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示