R5F109AAJSP#X0 - 16-Bit 32MHz RL78/F12 MCU | Renesas
MPN: R5F109AAJSP#X0 ✓ فعالR5F109AAJSP#X0 نمای کلی
An RL78 microcontroller is a compact embedded-processing device that combines a CPU core, flash memory, RAM, EEPROM, timers, serial interfaces, analog converters, and safety-oriented peripherals in one package. RL78/F12 devices occupy the low-power MCU tier of Renesas's product hierarchy, supporting battery-powered instruments, body-related modules, sensor nodes, and compact automotive control units where deterministic operation and low standby consumption are important.
Key device attributes include a 32 MHz maximum operating frequency, 16 KB flash organized as 16K x 8, 1 KB RAM organized as 1 x 8, and 4 KB EEPROM. The 1.8 V to 5.5 V operating range allows connection to 3.3 V and 5 V system rails. The device also includes a built-in LIN module for automotive networking and functional-safety resources such as flash CRC calculation, illegal-memory-access detection, RAM guard, A/D converter testing, and SFR protection.
The 30-LSSOP package is intended for cost-sensitive designs where a through-hole-style lead arrangement simplifies board inspection and assembly while keeping the footprint compact. Because the R5F109AAJSP#X0 is an RL78/F12 member, its 16 KB flash capacity suits compact control loops, status monitoring, key management, simple communications, and configuration tasks rather than large graphical user interfaces or high-volume data logging.
Typical uses include LIN-connected automotive submodules, compact sensor controllers, small industrial condition-monitoring units, battery-operated instruments, and low-power actuator controllers. The LIN interface makes the MCU appropriate for distributed vehicle systems where a node must exchange diagnostic or control data over a low-cost automotive network.
Designers should confirm the complete peripheral map, clock configuration, pin multiplexing, and electrical limits against the manufacturer datasheet before layout release. Use decoupling close to the supply pins, route the 32 MHz clock with short return paths, and confirm that the selected PCB footprint matches the 30-LSSOP variant. If firmware depends on a specific timer, ADC channel, or LIN configuration, verify that requirement against the ordered part number before production release.
جایگزینهای drop-in برای R5F109AAJSP#X0 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
R5F109AAJSP#V0
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
R5F109AAJSP#X0 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | 16-bit Microcontroller Unit (MCU) |
| Series | RL78/F12 |
| Core Architecture | 16-bit RL78 |
| حداکثر فرکانس کلاک | 32 MHz |
| Flash Program Memory | 16 KB (16K x 8) |
| RAM | 1 KB (1 x 8) |
| EEPROM | 4 KB |
| Operating Voltage Range | 1.8 V to 5.5 V |
| بستهبندی | 30-LSSOP, 6.1 mm body width |
| Automotive Network Interface | LIN module |
| Flash CRC Calculation | Supported |
| Illegal Memory Access Detection | Supported |
| RAM Guard | Supported |
| A/D Converter Testing | Supported |
| SFR Protection | Supported |
| وضعیت RoHS | Compliant |
راهنمای پیکربندی پین R5F109AAJSP#X0 30-lssop, 6.1 mm body width
پیکربندی پین برای R5F109AAJSP#X0 (پکیج 30-lssop, 6.1 mm body width). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای R5F109AAJSP#X0.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
R5F109AAJSP#X0 مناسب است برای 6 کاربردs: LIN-Connected Automotive Control Node, Battery-Powered Sensor Controller, Industrial Condition-Monitoring Unit, Small Actuator and Solenoid Driver Module, Embedded Key and Lock Controller, Compact Instrumentation Controller.
LIN-Connected Automotive Control Node
The R5F109AAJSP#X0 fits a distributed automotive node because its RL78/F12 architecture includes a built-in LIN module alongside a 32 MHz 16-bit core. The MCU can execute control logic, supervise inputs, and exchange diagnostic or status data through the LIN network while operating from a 1.8 V to 5.5 V supply. Its 16 KB flash accommodates compact firmware, and the 4 KB EEPROM supports configuration retention. The 30-LSSOP package also suits assemblies where a compact footprint and inspectable leads are preferred.
پیشنهادی
Battery-Powered Sensor Controller
The R5F109AAJSP#X0 is appropriate for a compact, battery-operated sensing module that periodically measures a condition and transmits a processed result. Its low-power-oriented RL78/F12 design can remain in a low-consumption state between measurement events, while the 32 MHz core provides adequate timing headroom for sensor conditioning and protocol handling. The 1 KB RAM is sufficient for short working buffers, and 16 KB flash holds a focused control program. Use the analog and low-power details from the manufacturer datasheet to establish the duty cycle and battery budget.
پیشنهادی
Industrial Condition-Monitoring Unit
A compact industrial monitor can use the R5F109AAJSP#X0 to sample equipment conditions, evaluate threshold states, and record events locally. The 16-bit RL78 core operating up to 32 MHz provides deterministic timer-based scheduling, while 16 KB flash and 1 KB RAM are adequate for a focused monitoring task rather than a large data-logging platform. The 4 KB EEPROM can retain calibration or configuration values when the firmware is designed for it. The 1.8 V to 5.5 V range permits integration with regulated industrial rails.
پیشنهادی
Small Actuator and Solenoid Driver Module
The R5F109AAJSP#X0 can serve as the logic controller in a small actuator module that accepts commands, manages sequencing, and reports system status. Its 32 MHz 16-bit core is suitable for deterministic timer and state-machine execution, while the 1.8 V to 5.5 V operating range supports integration with common low-voltage power systems. The device's flash and RAM limits favor a compact firmware footprint, and the 4 KB EEPROM can support persistent settings. Power-stage design, flyback protection, and thermal margin remain the responsibility of the surrounding circuit.
پیشنهادی
Embedded Key and Lock Controller
The R5F109AAJSP#X0 suits a compact key, lock, or access-control module that evaluates inputs and manages a small state machine. Its 16 KB flash provides space for a dedicated firmware image, while 1 KB of RAM is adequate for event buffers and short protocol transactions. The 32 MHz clock capability supports time-based debouncing, timing checks, and communication servicing without requiring a high-end application processor. EEPROM space can hold configuration data where the firmware supports nonvolatile parameter storage. Confirm security-feature requirements separately before using it for a safety-critical lock mechanism.
پیشنهادی
Compact Instrumentation Controller
The R5F109AAJSP#X0 can coordinate a small instrument that controls measurements, processes results, and presents status through a limited display or serial interface. Its 16-bit architecture and 32 MHz operating frequency support responsive control loops and menu logic, while 16 KB flash is appropriate for a dedicated rather than extensible firmware platform. The device's 1.8 V to 5.5 V range permits use with 3.3 V and 5 V system rails. Confirm the required A/D channels, timer resources, and display interface against the manufacturer datasheet before schematic assignment.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای R5F109AAJSP#X0 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | R5F109AAJSP#V0 |
|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics |
| Package | 30-LSSOP | 30-LSSOP |
| Core Architecture | 16-bit RL78 | 16-bit RL78 |
| Maximum Clock Frequency | 32 MHz | 32 MHz |
| Flash Program Memory | 16 KB (16K x 8) | 16 KB (16K x 8) |
| RAM | 1 KB (1 x 8) | 1 KB (1 x 8) |
| Automotive Network Interface | LIN module | LIN module |
| Functional-Safety Peripherals | Flash CRC calculation, illegal memory access detection, RAM guard, A/D converter testing, and SFR protection | RL78/F12 functional-safety feature set |
تفاوتهای کلیدی
- Documented same-family drop-in candidate (در مقابلR5F109AAJSP#V0)
- Integrated automotive network interface (در مقابلGeneric non-LIN 16-bit MCU)
- Functional-safety support within the MCU (در مقابلGeneral-purpose 16-bit MCU without the listed RL78/F12 safeguards)
یادداشتهای طراحی
Assign the 30-LSSOP footprint only after checking the mechanical drawing and pin-numbering convention in the Renesas datasheet. Place the input and output bypass capacitors adjacent to their corresponding supply pins, and route them through a short return path. Because the package has fine-pitch leads, verify solder mask clearance, paste volume, and reflow profile against the PCB assembly capability.
The R5F109AAJSP#X0 operates across 1.8 V to 5.5 V, but the usable internal clock and peripheral performance depend on voltage and wait-state settings. Use a regulator with appropriate transient response, provide local high-frequency decoupling, and keep analog and digital return currents separated as far as the board area allows. Confirm the exact brownout and clock-configuration requirements in the manufacturer datasheet.
Do not treat the 16 KB flash and 1 KB RAM limits as interchangeable with larger RL78/F12 members. Estimate the linked-code size, stack depth, driver buffers, and communication queues before committing the firmware architecture. Also verify the meaning of the final ordering characters, temperature range, and automotive qualification condition for the exact R5F109AAJSP#X0 variant.
For a LIN-connected design, keep the MCU and transceiver supply paths decoupled and route the LIN interface according to the transceiver reference layout. Preserve a continuous ground reference beneath signal routes, keep switching or high-current paths away from sensitive analog inputs, and validate rise times, termination strategy, and EMC behavior on the assembled board rather than relying only on schematic review.
اطلاعات انطباق
The component listing identifies the R5F109AAJSP#X0 as RoHS compliant. Reach, halogen-free, conflict-minerals, and exact AEC-Q100 qualification status for this ordering code are not stated in the available records.