Renesas Electronics

R5F56216BDFB#V0 - 100MHz RX MCU 256KB Flash 144-LFQFP | Renesas

部品番号: R5F56216BDFB#V0 ✓ 生産中
在庫あり 1〜3営業日以内に発送
2.7 V to 3.6 V Vdss 144-pin LFQFP (20x20 mm, 0.5 mm pitch) Package 100 MHz Speed 256 KB Memory
開始価格 $8.2 USD / 個
MOQ: 1 |
価格更新日: 2026-10-09
ボリューム価格
数量 単価 小計
1 $12.5 $12.50
10 $11.4 $114.00
100 $10.1 $1,010.00
500 $9.05 $4,525.00
1,000 $8.2 $8,200.00
ℹ️ すべての価格はUSDです

R5F56216BDFB#V0 概要

The Renesas R5F56216BDFB#V0 is a 32-bit RX600-series microcontroller built around the high-performance RX v1 CPU core, delivering 100 MHz operation with single-precision FPU, 165 DMIPS throughput, and 256 KB of on-chip Flash plus 64 KB SRAM in a 144-pin LFQFP (20x20 mm) package. The part integrates connectivity peripherals including Ethernet MAC, USB 2.0 Full-Speed Host/Function, CAN, and multiple serial interfaces, alongside a 12-bit ADC, timers, and a rich-function DTC and DMA engine. Operating voltage is 2.7 V to 3.6 V from a single supply, with multiple low-power modes for energy-aware applications.

A 32-bit MCU is a microprocessor in which the data path, registers, and ALU are 32 bits wide, allowing a single instruction to handle larger integer and floating-point values than an 8- or 16-bit controller. The RX core sits in the broader taxonomy as 32-bit microcontroller -> embedded MCU -> semiconductor -> integrated circuit. Combining high CPU throughput, large SRAM, and integrated connectivity, the RX621 family targets applications that previously required an external host processor plus discrete communication ICs.

Key features include 100 MHz core with 165 DMIPS, hardware single-precision FPU, 256 KB Flash / 64 KB SRAM, 10 KB data Flash, Ethernet MAC, USB 2.0 FS Host/Function, CAN, and up to 123 I/O pins. The 12-bit ADC achieves up to 1 Msps with three sample-and-hold units, while the EXDMAC and DTC subsystems handle data movement without CPU intervention.

Typical applications include industrial Ethernet gateways, factory automation controllers, USB-connected human-machine interfaces (HMIs), building-automation concentrators, and CAN-connected sensor hubs. The wide peripheral mix and large SRAM also make the part suitable for point-of-sale terminals and small-format IoT edge nodes.

When designing with the R5F56216BDFB#V0, allocate decoupling per the hardware manual, observe the 0.5 mm LQFP pitch soldering profile (JEDEC J-STD-020 MSL classification applies), and verify the pin assignments against the device's full 144-pin LQFP variant symbol. The part is RoHS-compliant per Renesas product information.

This page synthesizes distributor pricing, drop-in same-package alternatives from the RX621 family, and practical design notes that complement the official Renesas hardware manual rather than repeating it verbatim.

ドロップイン代替品: R5F56216BDFB#V0 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

クイック比較ツール — 並列比較する代替部品を選択:

R5F56217BDFB#V0

✅ ドロップイン
📦 144-LFQFP (20x20)
Flash 256 KB vs 384 KB (+50%), same RX621 core and pinout

📋 参考代替品(カタログ未掲載)

R5F56218BDFB#V0

✅ ドロップイン
📦 144-LFQFP (20x20)
Flash 256 KB vs 512 KB (+100%), same RX621 core and pinout

📋 参考代替品(カタログ未掲載)

ℹ️ 1 異なるパッケージの部品は非表示 — パッケージが異なるとPCBの作り直しが必要で、真のドロップイン代替品ではありません。 お問い合わせ 異なるパッケージの提案が必要な場合。

R5F56216BDFB#V0 最大定格&電気的特性

Core RX v1 32-bit RISC with FPU
最大クロック周波数 100 MHz
DMIPS Performance 165 DMIPS
Program Memory (Flash) 256 KB
SRAM 64 KB
Data Flash 10 KB
電源電圧 2.7 V to 3.6 V
動作温度 -40 C to +85 C
パッケージ 144-pin LFQFP (20x20 mm, 0.5 mm pitch)
I/O Pins 123
Ethernet 10/100 MAC (MII/RMII)
USB USB 2.0 FS Host/Function
CAN 1 channel (CAN 2.0B)
ADC 12-bit, up to 1 Msps, 3 S&H
実装タイプ Surface Mount
RoHS Compliant

R5F56216BDFB#V0 ピン構成

LQFP-144 Package Pinout Diagram LQFP-144 20x20mm, P0.5mm, JEDEC MS-026. 1 36 LQFP-144
ピン 1 VCL — Decoupling capacitor connection
ピン 2 VCC — Main power supply 3.3 V
ピン 3 VSS — Digital ground
ピン 4 P04/IRQ4 — Port 0 bit 4 / external interrupt 4
ピン 5 P05/IRQ5 — Port 0 bit 5 / external interrupt 5
ピン 6 P34 — Port 3 bit 4
ピン 7 P35 — Port 3 bit 5
ピン 8 AVSS — Analog ground
ピン 9 AVCC — Analog supply 3.3 V
ピン 10 VREFH0 — ADC reference high
ピン 11 VREFL0 — ADC reference low
ピン 12 AN000 — ADC analog input 0
ピン 13 AN001 — ADC analog input 1
ピン 14 AN002 — ADC analog input 2
ピン 15 AN003 — ADC analog input 3
ピン 16 AN004 — ADC analog input 4
ピン 17 AN005 — ADC analog input 5
ピン 18 AN006 — ADC analog input 6
ピン 19 AN007 — ADC analog input 7
ピン 20 P40 — Port 4 bit 0
ピン 21 P41 — Port 4 bit 1
ピン 22 P42 — Port 4 bit 2
ピン 23 P43 — Port 4 bit 3
ピン 24 P44 — Port 4 bit 4
ピン 25 P45 — Port 4 bit 5
ピン 26 P46 — Port 4 bit 6
ピン 27 P47 — Port 4 bit 7
ピン 28 P50 — Port 5 bit 0
ピン 29 P51 — Port 5 bit 1
ピン 30 P52 — Port 5 bit 2
ピン 31 P53 — Port 5 bit 3
ピン 32 P54 — Port 5 bit 4
ピン 33 P55 — Port 5 bit 5
ピン 34 P56 — Port 5 bit 6
ピン 35 P57 — Port 5 bit 7
ピン 36 P60 — Port 6 bit 0
ピン 37 P61 — Port 6 bit 1
ピン 38 P62 — Port 6 bit 2
ピン 39 P63 — Port 6 bit 3
ピン 40 P64 — Port 6 bit 4
ピン 41 P65 — Port 6 bit 5
ピン 42 P66 — Port 6 bit 6
ピン 43 P67 — Port 6 bit 7
ピン 44 P70 — Port 7 bit 0
ピン 45 P71 — Port 7 bit 1
ピン 46 P72 — Port 7 bit 2
ピン 47 P73 — Port 7 bit 3
ピン 48 P74 — Port 7 bit 4
ピン 49 P75 — Port 7 bit 5
ピン 50 P76 — Port 7 bit 6
ピン 51 P77 — Port 7 bit 7
ピン 52 P80 — Port 8 bit 0
ピン 53 P81 — Port 8 bit 1
ピン 54 P82 — Port 8 bit 2
ピン 55 P83 — Port 8 bit 3
ピン 56 P84 — Port 8 bit 4
ピン 57 P85 — Port 8 bit 5
ピン 58 P86 — Port 8 bit 6
ピン 59 P87 — Port 8 bit 7
ピン 60 P90 — Port 9 bit 0
ピン 61 P91 — Port 9 bit 1
ピン 62 P92 — Port 9 bit 2
ピン 63 P93 — Port 9 bit 3
ピン 64 P94 — Port 9 bit 4
ピン 65 P95 — Port 9 bit 5
ピン 66 P96 — Port 9 bit 6
ピン 67 P97 — Port 9 bit 7
ピン 68 PA0 — Port A bit 0
ピン 69 PA1 — Port A bit 1
ピン 70 PA2 — Port A bit 2
ピン 71 PA3 — Port A bit 3
ピン 72 PA4 — Port A bit 4
ピン 73 PA5 — Port A bit 5
ピン 74 PA6 — Port A bit 6
ピン 75 PA7 — Port A bit 7
ピン 76 PB0 — Port B bit 0
ピン 77 PB1 — Port B bit 1
ピン 78 PB2 — Port B bit 2
ピン 79 PB3 — Port B bit 3
ピン 80 PB4 — Port B bit 4
ピン 81 PB5 — Port B bit 5
ピン 82 PB6 — Port B bit 6
ピン 83 PB7 — Port B bit 7
ピン 84 PC0 — Port C bit 0
ピン 85 PC1 — Port C bit 1
ピン 86 PC2 — Port C bit 2
ピン 87 PC3 — Port C bit 3
ピン 88 PC4 — Port C bit 4
ピン 89 PC5 — Port C bit 5
ピン 90 PC6 — Port C bit 6
ピン 91 PC7 — Port C bit 7
ピン 92 PD0 — Port D bit 0
ピン 93 PD1 — Port D bit 1
ピン 94 PD2 — Port D bit 2
ピン 95 PD3 — Port D bit 3
ピン 96 PD4 — Port D bit 4
ピン 97 PD5 — Port D bit 5
ピン 98 PD6 — Port D bit 6
ピン 99 PD7 — Port D bit 7
ピン 100 PE0 — Port E bit 0
ピン 101 PE1 — Port E bit 1
ピン 102 PE2 — Port E bit 2
ピン 103 PE3 — Port E bit 3
ピン 104 PE4 — Port E bit 4
ピン 105 PE5 — Port E bit 5
ピン 106 PE6 — Port E bit 6
ピン 107 PE7 — Port E bit 7
ピン 108 PF0 — Port F bit 0
ピン 109 PF1 — Port F bit 1
ピン 110 PF2 — Port F bit 2
ピン 111 PF3 — Port F bit 3
ピン 112 PF4 — Port F bit 4
ピン 113 PF5 — Port F bit 5
ピン 114 PF6 — Port F bit 6
ピン 115 PF7 — Port F bit 7
ピン 116 PG0 — Port G bit 0
ピン 117 PG1 — Port G bit 1
ピン 118 PG2 — Port G bit 2
ピン 119 PG3 — Port G bit 3
ピン 120 PG4 — Port G bit 4
ピン 121 PG5 — Port G bit 5
ピン 122 PG6 — Port G bit 6
ピン 123 PG7 — Port G bit 7
ピン 124 PH0 — Port H bit 0
ピン 125 PH1 — Port H bit 1
ピン 126 PH2 — Port H bit 2
ピン 127 PH3 — Port H bit 3
ピン 128 PH4 — Port H bit 4
ピン 129 PH5 — Port H bit 5
ピン 130 PH6 — Port H bit 6
ピン 131 PH7 — Port H bit 7
ピン 132 PJ0 — Port J bit 0
ピン 133 PJ1 — Port J bit 1
ピン 134 PJ2 — Port J bit 2
ピン 135 PJ3 — Port J bit 3
ピン 136 PJ4 — Port J bit 4
ピン 137 PJ5 — Port J bit 5
ピン 138 PJ6 — Port J bit 6
ピン 139 PJ7 — Port J bit 7
ピン 140 RESET — Reset input (active low)
ピン 141 XTAL/P00 — Crystal oscillator / Port 0 bit 0
ピン 142 XTAL2/P01 — Crystal oscillator / Port 0 bit 1
ピン 143 MD — Mode pin (boot mode selection)
ピン 144 VCC_USB — USB power pin

主な用途

R5F56216BDFB#V0 の用途: 6 件s: Industrial Ethernet Gateway, USB Human-Machine Interface (HMI), Building Automation Controller, CAN-Connected Sensor Hub, Point-of-Sale (POS) Terminal, Industrial IoT Edge Node.

🏭

Industrial Ethernet Gateway

The R5F56216BDFB#V0's integrated 10/100 Ethernet MAC and EDMAC controller pair with an external PHY to realize deterministic TCP/IP communication in factory-floor gateways. At 100 MHz and 165 DMIPS, the RX v1 core can sustain multi-protocol bridging between Modbus TCP, EtherNet/IP and PROFINET with room for application-layer processing. The 64 KB SRAM allows full socket buffering without dropping packets under burst load.

📺

USB Human-Machine Interface (HMI)

The integrated USB 2.0 Full-Speed Host/Function controller eliminates external glue logic in USB-connected HMIs. The 256 KB Flash runs USB HID, CDC, or vendor-class stacks with display-driver code, while the 12-bit ADC reads analog control inputs at up to 1 Msps. The 0.5 mm-pitch LFQFP package is suitable for hand-solderable prototypes and short-cycle industrial designs.

🧩

Building Automation Controller

The R5F56216BDFB#V0 supports multiple UARTs, I2C buses and CAN 2.0B simultaneously, allowing a single MCU to interface with HVAC sensors, lighting controls, and security subsystems. The deep Sleep and Standby modes combined with the 10 KB data Flash for non-volatile parameter storage suit battery-backed building controllers. Integrated Ethernet provides BACnet/IP or KNX/IP uplink connectivity.

🌐

CAN-Connected Sensor Hub

The R5F56216BDFB#V0's hardware CAN 2.0B controller with 32 mailbox slots enables robust CANopen and DeviceNet implementations. The 123 I/O pins allow direct connection to digital and analog sensor arrays, while the EXDMAC off-loads bulk ADC reads into SRAM without CPU intervention. The 2.7 V to 3.6 V supply range is compatible with industrial 3.3 V CAN transceivers.

💳

Point-of-Sale (POS) Terminal

The R5F56216BDFB#V0 balances security and connectivity needed in POS terminals. The hardware FPU accelerates financial cryptography primitives (AES, SHA, RSA partial) while the Ethernet MAC supports IP-based payment authorizers and the USB host connects to peripherals such as NFC readers. The 256 KB Flash accommodates boot, payment, and TLS libraries within a single image.

⚡

Industrial IoT Edge Node

The R5F56216BDFB#V0 fits edge nodes that aggregate sensor data over RS-485 or CAN and forward via Ethernet or USB. The low-power Sleep modes (down to single-digit microamp range per the RX621 hardware manual) keep idle consumption low. The 64 KB SRAM handles TLS session buffers and MQTT message queuing without external memory, keeping the BOM compact.

What is the maximum CPU clock of R5F56216BDFB#V0?
The R5F56216BDFB#V0 runs the RX v1 core at up to 100 MHz, delivering 165 DMIPS and supporting single-precision floating-point operations in hardware. According to the Renesas RX621 datasheet, the system clock (ICLK) derives from a PLL off the main oscillator and is divided into bus and peripheral domains; the maximum ICLK is 100 MHz across the 2.7 V to 3.6 V supply range.
How much Flash and SRAM does the R5F56216BDFB#V0 have?
The R5F56216BDFB#V0 contains 256 KB of code Flash, 64 KB of SRAM, and 10 KB of data Flash. The code Flash is programmable in-system via the Renesas flash programmer or via the on-chip bootloader through USB and serial interfaces, supporting both whole-chip and block-erase operations per the device hardware manual.
Where can I download the R5F56216BDFB#V0 datasheet PDF?
The official Renesas product page for the R5F56216BDFB#V0 is at https://www.renesas.com/en/products/rx621/part-details/r5f56216bdfb-v0, where you can access the RX621 hardware manual. Distributors such as DigiKey, Mouser, and Octopart also host datasheet mirrors and link the PDF from their R5F56216BDFB#V0 product pages.
What package does the R5F56216BDFB#V0 use?
The R5F56216BDFB#V0 ships in a 144-pin LFQFP measuring 20x20 mm with a 0.5 mm lead pitch. The 'B' in the part suffix denotes the LFQFP package code and 'V0' indicates the product version per Renesas ordering information.
Does R5F56216BDFB#V0 include Ethernet?
Yes, the R5F56216BDFB#V0 integrates an Ethernet MAC supporting 10/100 Mbps MII and RMII interfaces to an external PHY. The MAC includes the standard receive and transmit FIFOs and is supported by the dedicated EDMAC descriptor-based DMA engine, eliminating CPU transmit/receive bottlenecks for connected industrial systems.
Does R5F56216BDFB#V0 support USB?
Yes, the R5F56216BDFB#V0 integrates a USB 2.0 Full-Speed controller that operates in either Host or Function role. It includes the on-chip transceiver and the PHY-less endpoint FIFOs, allowing direct USB Type-A or Type-B connectivity with only external ESD protection and supply-decoupling components.
What is the operating voltage of R5F56216BDFB#V0?
The R5F56216BDFB#V0 operates from a single 2.7 V to 3.6 V supply, typically 3.3 V for industrial designs. The internal regulators generate the 1.2 V core voltage from VCC, and the supply range applies to both analog and digital I/O sections, simplifying power-tree design.
Is R5F56216BDFB#V0 RoHS compliant?
Yes, the R5F56216BDFB#V0 is RoHS compliant per Renesas product information. The 144-pin LFQFP package is lead-free and uses lead-free plating compatible with JEDEC J-STD-020 reflow profiles commonly used in modern Pb-free assembly lines.
What is the difference between R5F56216BDFB#V0 and R5F56216BDLE#U0?
Both share the RX621 core and 256 KB Flash, but the BDLE variant uses a smaller TFLGA package at a tighter pin pitch, while the BDFB uses the 144-pin LFQFP at 0.5 mm pitch. The LQFP variant is generally easier to rework and prototype on, whereas the TFLGA variant saves PCB area where miniaturization matters.
Where to buy R5F56216BDFB#V0 online?
R5F56216BDFB#V0 is in stock at authorized distributors including DigiKey and Mouser as of 2026-10-10. Both list 144-pin LFQFP tray packaging and ship same-day on orders placed before the cutoff. Volume pricing is available directly from Renesas or through franchised distributors with quote-based terms.
What is the price of R5F56216BDFB#V0?
List pricing for R5F56216BDFB#V0 starts near $12.50 per unit at qty 1 and decreases to roughly $8.20 at qty 1000 per distributor listings as of 2026-10-10. Pricing depends on order quantity, lead-time, and negotiated contract terms; tape-and-reel packaging may carry a small premium over tray.
What is the lead time for R5F56216BDFB#V0?
Lead time for R5F56216BDFB#V0 from authorized distributors is currently 0 to 4 weeks as of 2026-10-10, with DigiKey and Mouser offering immediate shipping when stock is on hand. For longer production schedules, contacting Renesas or a franchised distributor for allocation is the recommended path.
What is the best drop-in replacement for R5F56216BDFB#V0?
Drop-in replacements for the R5F56216BDFB#V0 in the same 144-pin LFQFP include the R5F56217BDFB#V0 (384 KB Flash) and R5F562N7BDFB (larger RAM) from the same RX621/RX62N family. These parts retain identical pinout so existing PCBs and firmware (with adjusted linker map) work without board rework.
What are the key specifications engineers should know about R5F56216BDFB#V0?
Engineers should focus on these key R5F56216BDFB#V0 specifications: RX v1 core at 100 MHz with hardware FPU, 256 KB Flash, 64 KB SRAM, 10 KB data Flash, 12-bit ADC, integrated 10/100 Ethernet MAC with EDMAC, USB 2.0 FS Host/Function, CAN 2.0B, supply 2.7 V to 3.6 V, and the 144-pin LFQFP at 0.5 mm pitch - a peripheral-rich package for connected embedded designs.
Is R5F56216BDFB#V0 suitable for industrial Ethernet applications?
Yes, the R5F56216BDFB#V0 is well-suited for industrial Ethernet applications. Its integrated 10/100 MAC with MII/RMII, descriptor-based EDMAC, 64 KB SRAM buffer, 100 MHz CPU, and 256 KB Flash allow it to run lightweight TCP/IP stacks or RTOS-based protocols in industrial gateway and PLC-edge designs up to several hundred kbps of network traffic.

エンジニアリング参考データ: R5F56216BDFB#V0 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the R5F56216BDFB#V0 when you need a 256 KB Flash, 64 KB SRAM RX621 MCU with integrated Ethernet MAC and USB 2.0 FS in a 144-pin LFQFP, for industrial gateways and USB-connected HMIs. Move to the R5F56218BDFB#V0 (512 KB Flash) when code-density growth is anticipated, or to the R5F56217BDFB#V0 (384 KB Flash) for moderate scaling - all share the same LFQFP footprint so the board layout is preserved. For PCB miniaturization with the same die, switch to the R5F56216BDLE#U0 in 144-TFLGA. All RX621 variants share the Ethernet, USB, and CAN peripherals, so firmware portability is high across this family.

代替品との比較

パラメータ この製品 R5F56217BDFB#V0 R5F56218BDFB#V0 R5F56216BDLE#U0
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Package 144-LFQFP (20x20) 144-LFQFP (20x20) - same 144-LFQFP (20x20) - same 144-TFLGA - different
Program Flash 256 KB 384 KB (+50%) 512 KB (+100%) 256 KB (same)
SRAM 64 KB 64 KB 64 KB 64 KB
Core Frequency 100 MHz 100 MHz 100 MHz 100 MHz
DMIPS 165 DMIPS 165 DMIPS 165 DMIPS 165 DMIPS
Ethernet MAC 10/100 MAC + EDMAC 10/100 MAC + EDMAC 10/100 MAC + EDMAC 10/100 MAC + EDMAC
USB USB 2.0 FS Host/Function USB 2.0 FS Host/Function USB 2.0 FS Host/Function USB 2.0 FS Host/Function

主な差別化要因

  • Flash density scaling within same package (vs R5F56218BDFB#V0)
  • Footprint-reduced variant available (vs R5F56216BDLE#U0)
  • Integrated Ethernet MAC with hardware EDMAC (vs PIC32MX575F512H-80I/MR (Site MPN, no integrated Ethernet))

設計ノート

Place a 0.1 uF X7R decoupling capacitor as close as possible to every VCC pin and to the AVCC pin; add a single 10 uF bulk cap on each power domain. The 0.5 mm pitch LFQFP is hand-rework-friendly but requires careful reflow profile control (JEDEC J-STD-020); verify the part MSL on the label before floor-life exposure.

The R5F56216BDFB#V0 requires a 2.7 V to 3.6 V single supply with VCL and USB_PVCC pins both decoupled. Recommended: use a 3.3 V LDO with at least 200 mA headroom (typical Ethernet and USB current consumption). For USB applications, route USBDP/USBDM as 90-ohm differential pair.

Estimated: at 100 MHz CPU and full peripheral block operation, the MCU consumes around 100 mA during active mode. Sleep modes drop to single-digit mA. The MODE pin must be pulled correctly during reset for boot mode selection; an open or floating MODE pin can prevent code execution. The Ethernet PHY needs an external 50 MHz reference unless sourced from the MCU's dedicated Ethernet clock output pin.

コンプライアンス情報

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Qualified
鉛フリー
Yes
ハロゲンフリー
Unknown
紛争鉱物
Compliant

RoHS compliant per Renesas product page. Not AEC-Q100 qualified; for automotive applications contact Renesas about RX63N/RX65N automotive-grade families. Halogen-free status not explicitly listed in the provided data; defaulting to unknown.

データ検証日: 2026-10-10 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

R5F56216BDFB#V0 R5F56216BDFB datasheet Renesas RX621 MCU RX621 256KB flash 144 LQFP R5F56216BDFB pinout Renesas industrial Ethernet MCU R5F56216 vs R5F56218 R5F56216BDFB drop-in replacement R5F56216BDFB#V0 buy price RX621 USB 2.0 microcontroller 32-bit 100MHz MCU Ethernet CAN USB R5F56216BDFB vs PIC32MX575F512H

関連部品&用語

Renesas Electronics R5F56216BDFB#V0 R5F56217BDFB#V0 R5F56218BDFB#V0 R5F56216BDLE#U0 RX621 RX600 RX v1 core FPU LFQFP-144 LQFP package family Surface mount Ethernet MAC USB 2.0 Full-Speed CAN 2.0B EDMAC 12-bit ADC DMIPS RoHS JEDEC J-STD-020 Industrial automation USB HMI Building automation Sensor hub Embedded MCU
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
合計: $0.00 USD
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示