R7FA6M2AF3CFP#AA0 - 120MHz Arm Cortex-M4 MCU, 1MB Flash, 100-LFQFP | Renesas
部品番号: R7FA6M2AF3CFP#AA0 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $11.5 | $11.50 |
| 10 | $10.35 | $103.50 |
| 100 | $9.2 | $920.00 |
| 500 | $8.3 | $4,150.00 |
| 1,000 | $7.45 | $7,450.00 |
R7FA6M2AF3CFP#AA0 概要
An Arm Cortex-M4 microcontroller is a 32-bit MCU class member of the ARM Cortex-M family, characterized by a Harvard architecture, hardware single-precision floating-point unit, DSP extensions, deterministic interrupt handling via NVIC, and low power modes. Within the hierarchy, Cortex-M4 sits between Cortex-M3 (no FPU) and Cortex-M7 (higher performance); the broader family lineage covers Cortex-M0/M0+/M3/M4/M7/M23/M33, and ultimately belongs to the semiconductor > integrated circuit > microcontroller > 32-bit MCU > ARM-based MCU product type tree.
Key specifications of this part include a 120 MHz maximum CPU clock, 1 MB code flash, 384 KB SRAM, a 12-bit A/D converter with multiple channels, Ethernet MAC, USB 2.0 FS, CAN FD, multiple serial interfaces (SCI/SPI/I2C), and a wide operating voltage range typically from 2.7 V to 3.6 V. According to the Renesas RA6M2 group datasheet, this device also features security extensions, capacitive touch sensing, and a low-power RTC.
The R7FA6M2AF3CFP#AA0 is built on a low-power CMOS process and uses the Armv7E-M architecture with a 3-stage pipeline. Its integration of Ethernet and USB on-chip reduces external component count for connected products. The peripheral set is software- and pin-compatible with other RA6 series devices, enabling scalability across the Renesas RA family platform.
Typical applications include industrial sensor hubs, building automation controllers, IoT edge gateways with Ethernet, HMI panels, and motor-control auxiliary MCUs. The Ethernet MAC plus CAN FD combination supports Industry 4.0 nodes bridging fieldbus and corporate networks.
When designing with this device, ensure the 100-LFQFP land pattern is properly cooled via copper pour; the on-chip Ethernet PHY interface requires a reference clock and magnetics. Use Renesas e2 studio IDE and the RA Flexible Software Package (FSP) for firmware development.
This page synthesizes distributor pricing, parametric tables, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate and source the R7FA6M2AF3CFP#AA0 for production designs.
ドロップイン代替品: R7FA6M2AF3CFP#AA0 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: R7FA6M2AF3CFP#AA0 （同一形状・フットプリント） — 相違点: ADC, Package, SRAM.
クイック比較ツール — 並列比較する代替部品を選択:
R7FA6M2AG3CFP#AA0
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
R7FA6M2AF2CFP#AA0
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
R7FA6M3AF3CFP#AA0
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
R7FA6M5AF3CFP#AA0
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
STM32F407VGT6
✅ ドロップイン✓ 在庫あり
$7.55 / 個
データシートを見る →R7FA6M2AF3CFP#AA0 最大定格＆電気的特性
| Product Type | 32-bit Microcontroller (MCU) |
| Series | RA6M2 (Renesas Advanced RA family) |
| Core Architecture | Arm Cortex-M4 with FPU and DSP (Armv7E-M) |
| Maximum CPU Clock | 120 MHz |
| Program Memory (Flash) | 1 MB |
| SRAM | 384 KB |
| パッケージ | 100-pin LFQFP (14x14 mm) |
| Ethernet MAC | Yes (10/100 Mbps with DMA) |
| USB | USB 2.0 Full-Speed |
| CAN | CAN FD |
| ADC | 12-bit A/D converter |
| 実装タイプ | Surface Mount |
R7FA6M2AF3CFP#AA0 100-pin lfqfp (14x14 mm) ピン配置ガイド
R7FA6M2AF3CFP#AA0 (100-pin lfqfp (14x14 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: R7FA6M2AF3CFP#AA0.
詳細は データシート をご参照ください。
主な用途
R7FA6M2AF3CFP#AA0 の用途: 6 件s: Industrial Ethernet Gateway, Building Automation Controller, IoT Edge Sensor Hub, HMI Touch Panel Controller, Motor Control Auxiliary MCU, Smart Energy Meter.
Industrial Ethernet Gateway
The R7FA6M2AF3CFP#AA0's on-chip 10/100 Mbps Ethernet MAC with dedicated DMA makes it an ideal core for industrial protocol gateways bridging fieldbus networks to corporate Ethernet. The 120 MHz Cortex-M4 with FPU handles TCP/IP, MQTT, and Modbus TCP stacks without external MAC chips, while the 384 KB SRAM accommodates network buffers. Compared to microcontrollers without integrated Ethernet, this part reduces BOM cost and PCB area. The wide operating voltage range supports 24V industrial bus systems with proper regulation. The 100-LFQFP package exposes all required peripheral pins for stacklight HMI panels, sensor hubs, and edge controllers in Industry 4.0 deployments.
おすすめ
Building Automation Controller
Building automation systems require reliable, connected MCUs to control HVAC, lighting, and access systems. The R7FA6M2AF3CFP#AA0's 1 MB flash accommodates complex control algorithms and BACnet/Modbus stacks, while 384 KB SRAM supports multi-protocol buffering. The CAN FD interface enables integration with elevator control networks, and USB 2.0 FS allows local commissioning via standard USB hosts. Compared to lower-end Cortex-M0+ MCUs, this Cortex-M4 with DSP extension enables real-time signal processing for occupancy sensors and predictive maintenance algorithms. The 100-LFQFP package is well-suited for reflow soldering in volume building automation products.
おすすめ
IoT Edge Sensor Hub
IoT edge sensor hubs aggregate data from multiple sensors and relay it to cloud services via Ethernet or USB. The R7FA6M2AF3CFP#AA0's 12-bit ADC reads analog sensors, its multiple serial interfaces (SCI, SPI, I2C) connect to digital sensors, and Ethernet MAC uplinks to IP networks. The 120 MHz Cortex-M4 provides enough headroom for on-device analytics such as anomaly detection and FFT-based vibration analysis. Compared to wireless-only IoT MCUs, this part enables wired connectivity for factory floor installations where Wi-Fi is unreliable. The 1 MB flash supports secure boot and TLS libraries for edge-to-cloud security.
おすすめ
HMI Touch Panel Controller
Human-machine interface (HMI) panels combine a display, touch input, and connectivity. The R7FA6M2AF3CFP#AA0 supports capacitive touch sensing via dedicated hardware, drives TFT displays through SPI or parallel interfaces, and maintains communication via Ethernet or CAN FD. The Cortex-M4 with FPU accelerates GUI rendering libraries such as emWin or LVGL. Compared to ARM9-based legacy HMI controllers, this Cortex-M4 device delivers faster response at lower power. The 100-LFQFP package provides ample GPIO for parallel display interfaces and touch panel I/O. Industrial temperature grade supports factory floor HMI deployment.
おすすめ
Motor Control Auxiliary MCU
Auxiliary MCUs in motor control systems handle communication, fault detection, and user interface tasks separate from the main DSP/MCU controlling the inverter. The R7FA6M2AF3CFP#AA0's CAN FD interfaces with motor controllers and VFDs, Ethernet uplinks to plant SCADA systems, and the 12-bit ADC monitors motor currents, voltages, and temperatures. The Cortex-M4 DSP extension enables FFT-based vibration analysis for predictive maintenance. Compared to small 8-bit MCUs in legacy designs, this part offers integrated connectivity that eliminates external bridge chips. The 100-LFQFP package fits standard industrial control board form factors.
おすすめ
Smart Energy Meter
Smart energy meters require accurate ADC measurement, secure communication, and robust operation in electrical noise environments. The R7FA6M2AF3CFP#AA0's 12-bit ADC samples current and voltage waveforms, the Cortex-M4 DSP computes power quality metrics (THD, harmonics), and Ethernet or PLC connectivity uploads data to utility backhaul. The 1 MB flash supports secure boot, metering firmware, and DLMS/COSEM protocol stacks. Compared to dedicated metering SoCs, this general-purpose MCU offers more flexibility for custom feature sets. The 100-LFQFP package accommodates the necessary peripheral routing for metering reference designs.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: R7FA6M2AF3CFP#AA0 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | R7FA6M2AG3CFP#AA0 | R7FA6M2AF2CFP#AA0 | R7FA6M3AF3CFP#AA0 | STM32F407VGT6 |
|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | STMicroelectronics |
| Package | 100-LFQFP (14x14) | 100-LFQFP (14x14) - same | 100-LFQFP (14x14) - same | 100-LFQFP (14x14) - same | 100-LQFP (14x14) - same |
| Core | Arm Cortex-M4 @ 120 MHz | Arm Cortex-M4 @ 120 MHz | Arm Cortex-M4 @ 120 MHz | Arm Cortex-M4 @ 120 MHz | Arm Cortex-M4 @ 168 MHz |
| Ethernet MAC | Yes (10/100 with DMA) | Yes | Yes | Yes (10/100) | |
| CAN FD | Yes | Yes | Yes | No (CAN 2.0B only) | |
| USB | USB 2.0 FS | USB 2.0 FS | USB 2.0 FS + HS | USB 2.0 FS + OTG |
主な差別化要因
- Integrated Ethernet MAC plus CAN FD on-chip （vs STM32F407VGT6)
- Larger SRAM (384 KB vs 192 KB) （vs STM32F407VGT6)
- Pin-compatible scalability within Renesas RA family （vs Cross-brand Cortex-M4 parts)
設計ノート
Estimated: When the R7FA6M2AF3CFP#AA0 operates at 120 MHz with all peripherals active, typical current draw is approximately 50-80 mA from a 3.3 V supply (per Renesas RA6M2 datasheet typical characteristics). Decoupling requires a 10 uF bulk capacitor near VDD pins plus 100 nF ceramic capacitors on each VDD/VDDA pin pair. Place decoupling capacitors within 2 mm of each power pin. A ferrite bead or filter on analog VDD improves ADC noise performance for sensitive measurements.
The 100-LFQFP package has theta_JA around 50 C/W typical on a 4-layer JEDEC test board. At 80 mA active current and 3.3 V supply, dissipation is approximately 0.26 W, yielding a 13 C temperature rise above ambient - well within safe limits. For continuous full-load operation in enclosed industrial enclosures, ensure at least 1 square inch of copper pour on the top layer connected to the thermal pad and exposed pad for heat spreading.
Route the Ethernet differential pairs (REF_CLKx, ETH_TXD, ETH_RXD) as 50-ohm impedance-controlled traces with length matching within 2 mm. Keep PHY-to-MAC traces short and isolated from noisy power and signal traces. Place the 50 MHz external PHY clock crystal within 5 mm of the PHY CLK input with guard ground. The USB D+/D- pair also requires 90-ohm differential impedance. Use Renesas e2 studio and the RA Flexible Software Package (FSP) for validated Ethernet and USB middleware stacks.
Do not exceed the absolute maximum VDD rating during flash programming operations, as in-circuit programming can cause voltage transients. Ensure the MODE pins are correctly configured for the desired boot mode before applying power. When migrating from RA6M2 to RA6M3 or RA6M5, verify peripheral pin multiplexing changes via the Renesas RA pin configurator tool, as some alternate functions shift between group revisions even with the same package footprint.
コンプライアンス情報
RoHS/REACH compliance status not confirmed in verified web data; consult Renesas product page or contact manufacturer. Lead-free per Renesas RA6 family standard.
